Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-04-11 (ice, i40e, ixgbe, igc, e1000e)
For ice:
Mateusz and Larysa add support for LLDP packets to be received on a VF
and transmitted by a VF in switchdev mode. Additional information:
https://lore.kernel.org/intel-wired-lan/20250214085215.2846063-1-larysa.zaremba@intel.com/
Karol adds timesync support for E825C devices using 2xNAC (Network
Acceleration Complex) configuration. 2xNAC mode is the mode in which
IO die is housing two complexes and each of them has its own PHY
connected to it.
Martyna adds messaging to clarify filter errors when recipe space is
exhausted.
Colin Ian King adds static modifier to a const array to avoid stack
usage.
For i40e:
Kyungwook Boo changes variable declaration types to prevent possible
underflow.
For ixgbe:
Rand Deeb adjusts retry values so that retries are attempted.
For igc:
Rui Salvaterra sets VLAN offloads to be enabled as default.
For e1000e:
Piotr Wejman converts driver to use newer hardware timestamping API.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
net: e1000e: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
igc: enable HW vlan tag insertion/stripping by default
ixgbe: Fix unreachable retry logic in combined and byte I2C write functions
i40e: fix MMIO write access to an invalid page in i40e_clear_hw
ice: make const read-only array dflt_rules static
ice: improve error message for insufficient filter space
ice: enable timesync operation on 2xNAC E825 devices
ice: refactor ice_sbq_msg_dev enum
ice: remove SW side band access workaround for E825
ice: enable LLDP TX for VFs through tc
ice: support egress drop rules on PF
ice: remove headers argument from ice_tc_count_lkups
ice: receive LLDP on trusted VFs
ice: do not add LLDP-specific filter if not necessary
ice: fix check for existing switch rule
====================
Link: https://patch.msgid.link/20250411204401.3271306-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joseph Huang says:
====================
Add support for mdb offload failure notification
Currently the bridge does not provide real-time feedback to user space
on whether or not an attempt to offload an mdb entry was successful.
This patch set adds support to notify user space about failed offload
attempts, and is controlled by a new knob mdb_offload_fail_notification.
A break-down of the patches in the series:
Patch 1 adds offload failed flag to indicate that the offload attempt
has failed. The flag is reflected in netlink mdb entry flags.
Patch 2 adds the new bridge bool option mdb_offload_fail_notification.
Patch 3 notifies user space when the result is known, controlled by
mdb_offload_fail_notification setting.
====================
Link: https://patch.msgid.link/20250411150323.1117797-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Peter Seiderer says:
====================
net: pktgen: fix checkpatch code style errors/warnings
Fix checkpatch detected code style errors/warnings detected in
the file net/core/pktgen.c (remaining checkpatch checks will be addressed
in a follow up patch set).
====================
Link: https://patch.msgid.link/20250410071749.30505-1-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix checkpatch code style warnings:
WARNING: Missing a blank line after declarations
#761: FILE: net/core/pktgen.c:761:
+ char c;
+ if (get_user(c, &user_buffer[i]))
WARNING: Missing a blank line after declarations
#780: FILE: net/core/pktgen.c:780:
+ char c;
+ if (get_user(c, &user_buffer[i]))
WARNING: Missing a blank line after declarations
#806: FILE: net/core/pktgen.c:806:
+ char c;
+ if (get_user(c, &user_buffer[i]))
WARNING: Missing a blank line after declarations
#823: FILE: net/core/pktgen.c:823:
+ char c;
+ if (get_user(c, &user_buffer[i]))
WARNING: Missing a blank line after declarations
#1968: FILE: net/core/pktgen.c:1968:
+ char f[32];
+ memset(f, 0, 32);
WARNING: Missing a blank line after declarations
#2410: FILE: net/core/pktgen.c:2410:
+ struct pktgen_net *pn = net_generic(dev_net(pkt_dev->odev), pg_net_id);
+ if (!x) {
WARNING: Missing a blank line after declarations
#2442: FILE: net/core/pktgen.c:2442:
+ __u16 t;
+ if (pkt_dev->flags & F_QUEUE_MAP_RND) {
WARNING: Missing a blank line after declarations
#2523: FILE: net/core/pktgen.c:2523:
+ unsigned int i;
+ for (i = 0; i < pkt_dev->nr_labels; i++)
WARNING: Missing a blank line after declarations
#2567: FILE: net/core/pktgen.c:2567:
+ __u32 t;
+ if (pkt_dev->flags & F_IPSRC_RND)
WARNING: Missing a blank line after declarations
#2587: FILE: net/core/pktgen.c:2587:
+ __be32 s;
+ if (pkt_dev->flags & F_IPDST_RND) {
WARNING: Missing a blank line after declarations
#2634: FILE: net/core/pktgen.c:2634:
+ __u32 t;
+ if (pkt_dev->flags & F_TXSIZE_RND) {
WARNING: Missing a blank line after declarations
#2736: FILE: net/core/pktgen.c:2736:
+ int i;
+ for (i = 0; i < pkt_dev->cflows; i++) {
WARNING: Missing a blank line after declarations
#2738: FILE: net/core/pktgen.c:2738:
+ struct xfrm_state *x = pkt_dev->flows[i].x;
+ if (x) {
WARNING: Missing a blank line after declarations
#2752: FILE: net/core/pktgen.c:2752:
+ int nhead = 0;
+ if (x) {
WARNING: Missing a blank line after declarations
#2795: FILE: net/core/pktgen.c:2795:
+ unsigned int i;
+ for (i = 0; i < pkt_dev->nr_labels; i++)
WARNING: Missing a blank line after declarations
#3480: FILE: net/core/pktgen.c:3480:
+ ktime_t idle_start = ktime_get();
+ schedule();
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix checkpatch code style warnings:
WARNING: Block comments use a trailing */ on a separate line
+ * removal by worker thread */
WARNING: Block comments use * on subsequent lines
+ __u8 tos; /* six MSB of (former) IPv4 TOS
+ are for dscp codepoint */
WARNING: Block comments use a trailing */ on a separate line
+ are for dscp codepoint */
WARNING: Block comments use * on subsequent lines
+ __u8 traffic_class; /* ditto for the (former) Traffic Class in IPv6
+ (see RFC 3260, sec. 4) */
WARNING: Block comments use a trailing */ on a separate line
+ (see RFC 3260, sec. 4) */
WARNING: Block comments use * on subsequent lines
+ /* = {
+ 0x00, 0x80, 0xC8, 0x79, 0xB3, 0xCB,
WARNING: Block comments use * on subsequent lines
+ /* Field for thread to receive "posted" events terminate,
+ stop ifs etc. */
WARNING: Block comments use a trailing */ on a separate line
+ stop ifs etc. */
WARNING: Block comments should align the * on each line
+ * we go look for it ...
+*/
WARNING: Block comments use a trailing */ on a separate line
+ * we resolve the dst issue */
WARNING: Block comments use a trailing */ on a separate line
+ * with proc_create_data() */
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdevice reg_state was split into two 16 bit enums back in 2010
in commit a2835763e1 ("rtnetlink: handle rtnl_link netlink
notifications manually"). Since the split the fields have been
moved apart, and last year we converted reg_state to a normal
u8 in commit 4d42b37def ("net: convert dev->reg_state to u8").
rtnl_link_state being a 16 bitfield makes no sense. Convert it
to a single bool, it seems very unlikely after 15 years that
we'll need more values in it.
We could drop dev->rtnl_link_ops from the conditions but feels
like having it there more clearly points at the reason for this
hack.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250410014246.780885-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to work properly PRP requires slave1 and slave2 to share the
same MAC address. To ease the configuration process on userspace tools,
sync the slave2 MAC address with slave1. In addition, when deleting the
port from the list, restore the original MAC address.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Airoha AN7581 SoC ship with a Switch based on the MT753x Switch embedded
in other SoC like the MT7581 and the MT7988. Similar to these they
require configuring some pin to enable LED PHYs.
Add support for the PHY ID for the Airoha embedded Switch and define a
simple probe function to toggle these pins. Also fill the LED functions
and add dedicated function to define LED polarity.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250410100410.348-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When commit 462a3daad6 ("net: phy: mediatek: fix compile-test
dependencies") fixed the dependency, it should have also introduced
an or on COMPILE_TEST to permit this driver to be compile-tested even if
NVMEM_MTK_EFUSE wasn't selected. The driver makes use of NVMEM API that
are always compiled (return error) so the driver can actually be
compiled even without that config.
Fix and simplify the dependency condition of this kernel config.
Fixes: 462a3daad6 ("net: phy: mediatek: fix compile-test dependencies")
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250410100410.348-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
net: Retire DCCP socket.
As announced by commit b144fcaf46 ("dccp: Print deprecation
notice."), it's time to remove DCCP socket.
The patch 2 removes net/dccp, LSM code, doc, and etc, leaving
DCCP netfilter modules.
The patch 3 unexports shared functions for DCCP, and the patch 4
renames tcp_or_dccp_get_hashinfo() to tcp_get_hashinfo().
We can do more cleanup; for example, remove IPPROTO_TCP checks in
__inet6?_check_established(), remove __module_get() for twsk,
remove timewait_sock_ops.twsk_destructor(), etc, but it will be
more of TCP stuff, so I'll defer to a later series.
v2: https://lore.kernel.org/20250409003014.19697-1-kuniyu@amazon.com
v1: https://lore.kernel.org/20250407231823.95927-1-kuniyu@amazon.com
====================
Link: https://patch.msgid.link/20250410023921.11307-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP was orphaned in 2021 by commit 054c4610bd ("MAINTAINERS: dccp:
move Gerrit Renker to CREDITS"), which noted that the last maintainer
had been inactive for five years.
In recent years, it has become a playground for syzbot, and most changes
to DCCP have been odd bug fixes triggered by syzbot. Apart from that,
the only changes have been driven by treewide or networking API updates
or adjustments related to TCP.
Thus, in 2023, we announced we would remove DCCP in 2025 via commit
b144fcaf46 ("dccp: Print deprecation notice.").
Since then, only one individual has contacted the netdev mailing list. [0]
There is ongoing research for Multipath DCCP. The repository is hosted
on GitHub [1], and development is not taking place through the upstream
community. While the repository is published under the GPLv2 license,
the scheduling part remains proprietary, with a LICENSE file [2] stating:
"This is not Open Source software."
The researcher mentioned a plan to address the licensing issue, upstream
the patches, and step up as a maintainer, but there has been no further
communication since then.
Maintaining DCCP for a decade without any real users has become a burden.
Therefore, it's time to remove it.
Removing DCCP will also provide significant benefits to TCP. It allows
us to freely reorganize the layout of struct inet_connection_sock, which
is currently shared with DCCP, and optimize it to reduce the number of
cachelines accessed in the TCP fast path.
Note that we keep DCCP netfilter modules as requested. [3]
Link: https://lore.kernel.org/netdev/20230710182253.81446-1-kuniyu@amazon.com/T/#u #[0]
Link: https://github.com/telekom/mp-dccp #[1]
Link: https://github.com/telekom/mp-dccp/blob/mpdccp_v03_k5.10/net/dccp/non_gpl_scheduler/LICENSE #[2]
Link: https://lore.kernel.org/netdev/Z_VQ0KlCRkqYWXa-@calendula/ #[3]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM and SELinux)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://patch.msgid.link/20250410023921.11307-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EN8811H outputs 25MHz or 50MHz clocks on CKO, selected by GPIO3.
CKO clock operates continuously from power-up through md32 loading.
Implement clk provider driver so we can disable the clock output in case
it isn't needed, which also helps to reduce EMF noise
Signed-off-by: Lucien.Jheng <lucienx123@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250409150902.3596-1-lucienx123@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is enabled by default in other Intel drivers I've checked (e1000, e1000e,
iavf, igb and ice). Fixes an out-of-the-box performance issue when running
OpenWrt on typical mini-PCs with igc-supported Ethernet controllers and 802.1Q
VLAN configurations, as ethtool isn't part of the default packages and sane
defaults are expected.
In my specific case, with an Intel N100-based machine with four I226-V Ethernet
controllers, my upload performance increased from under 30 Mb/s to the expected
~1 Gb/s.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The current implementation of `ixgbe_write_i2c_combined_generic_int` and
`ixgbe_write_i2c_byte_generic_int` sets `max_retry` to `1`, which makes
the condition `retry < max_retry` always evaluate to `false`. This renders
the retry mechanism ineffective, as the debug message and retry logic are
never executed.
This patch increases `max_retry` to `3` in both functions, aligning them
with the retry logic in `ixgbe_read_i2c_combined_generic_int`. This
ensures that the retry mechanism functions as intended, improving
robustness in case of I2C write failures.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Don't populate the const read-only array dflt_rules on the stack at run
time, instead make it static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When adding a rule to switch through tc, if the operation fails
due to not enough free recipes (-ENOSPC), provide a clearer
error message: "Unable to add filter: insufficient space available."
This improves user feedback by distinguishing space limitations from
other generic failures.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
According to the E825C specification, SBQ address for ports on a single
complex is device 2 for PHY 0 and device 13 for PHY1.
For accessing ports on a dual complex E825C (so called 2xNAC mode),
the driver should use destination device 2 (referred as phy_0) for
the current complex PHY and device 13 (referred as phy_0_peer) for
peer complex PHY.
Differentiate SBQ destination device by checking if current PF port
number is on the same PHY as target port number.
Adjust 'ice_get_lane_number' function to provide unique port number for
ports from PHY1 in 'dual' mode config (by adding fixed offset for PHY1
ports). Cache this value in ice_hw struct.
Introduce ice_get_primary_hw wrapper to get access to timesync register
not available from second NAC.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Rename ice_sbq_msg_dev to ice_sbq_dev_id to reflect the meaning of this
type more precisely. This enum type describes RDA (Remote Device Access)
client ids, accessible over SB (Side Band) interface.
Rename enum elements to make a driver namespace more cleaner and
consistent with other definitions within SB
Remove unused 'rmn_x' entries, specific to unsupported E824 device.
Adjust clients '2' and '13' names (phy_0 and phy_0_peer respectively) to
be compliant with EAS doc. According to the specification, regardless of
the complex entity (single or dual), when accessing its own ports,
they're accessed always as 'phy_0' client. And referred as 'phy_0_peer'
when handling ports connected to the other complex.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Due to the bug in FW/NVM autoload mechanism (wrong default
SB_REM_DEV_CTL register settings), the access to peer PHY and CGU
clients was disabled by default.
As the workaround solution, the register value was overwritten by the
driver at the probe or reset handling.
Remove workaround as it's not needed anymore. The fix in autoload
procedure has been provided with NVM 3.80 version.
NOTE: at the time the fix was provided in NVM, the E825C product was
not officially available on the market, so it's not expected this change
will cause regression when running with older driver/kernel versions.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Only a single VSI can be in charge of sending LLDP frames, sometimes it is
beneficial to assign this function to a VF, that is possible to do with tc
capabilities in the switchdev mode. It requires first blocking the PF from
sending the LLDP frames with a following command:
tc filter add dev <ifname> egress protocol lldp flower skip_sw action drop
Then it becomes possible to configure a forward rule from a VF port
representor to uplink instead.
tc filter add dev <vf_ifname> ingress protocol lldp flower skip_sw
action mirred egress redirect dev <ifname>
How LLDP exclusivity was done previously is LLDP traffic was blocked for a
whole port by a single rule and PF was bypassing that. Now at least in the
switchdev mode, every separate VSI has to have its own drop rule. Another
complication is the fact that tc does not respect when the driver refuses
to delete a rule, so returning an error results in a HW rule still present
with no way to reference it through tc. This is addressed by allowing the
PF rule to be deleted at any time, but making the VF forward rule "dormant"
in such case, this means it is deleted from HW but stays in tc and driver's
bookkeeping to be restored when drop rule is added back to the PF.
Implement tc configuration handling which enables the user to transmit LLDP
packets from VF instead of PF.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
tc clsact qdisc allows us to add offloaded egress rules with commands such
as the following one:
tc filter add dev <ifname> egress protocol lldp flower skip_sw action drop
Support the egress rule drop action when added to PF, with a few caveats:
* in switchdev mode, all PF traffic has to go uplink with an exception for
LLDP that can be delegated to a single VSI at a time
* in legacy mode, we cannot delegate LLDP functionality to another VSI, so
such packets from PF should not be blocked.
Also, simplify the rule direction logic, it was previously derived from
actions, but actually can be inherited from the tc block (and flipped in
case of port representors).
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a trusted VF tries to configure an LLDP multicast address, configure a
rule that would mirror the traffic to this VF, untrusted VFs are not
allowed to receive LLDP at all, so the request to add LLDP MAC address will
always fail for them.
Add a forwarding LLDP filter to a trusted VF when it tries to add an LLDP
multicast MAC address. The MAC address has to be added after enabling
trust (through restarting the LLDP service).
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Co-developed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 34295a3696 ("ice: implement new LLDP filter command")
introduced the ability to use LLDP-specific filter that directs all
LLDP traffic to a single VSI. However, current goal is for all trusted VFs
to be able to see LLDP neighbors, which is impossible to do with the
special filter.
Make using the generic filter the default choice and fall back to special
one only if a generic filter cannot be added. That way setups with "NVMs
where an already existent LLDP filter is blocking the creation of a filter
to allow LLDP packets" will still be able to configure software Rx LLDP on
PF only, while all other setups would be able to forward them to VFs too.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In case the rule already exists and another VSI wants to subscribe to it
new VSI list is being created and both VSIs are moved to it.
Currently, the check for already existing VSI with the same rule is done
based on fdw_id.hw_vsi_id, which applies only to LOOKUP_RX flag.
Change it to vsi_handle. This is software VSI ID, but it can be applied
here, because vsi_map itself is also based on it.
Additionally change return status in case the VSI already exists in the
VSI map to "Already exists". Such case should be handled by the caller.
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some stm32 implementations need the receive clock running in suspend,
as indicated by dwmac->ops->clk_rx_enable_in_suspend. The existing
code achieved this in a rather complex way, by passing a flag around.
However, the clk API prepare/enables are counted - which means that a
clock won't be stopped as long as there are more prepare and enables
than disables and unprepares, just like a reference count.
Therefore, we can simplify this logic by calling clk_prepare_enable()
an additional time in the probe function if this flag is set, and then
balancing that at remove time.
With this, we can avoid passing a "are we suspending" and "are we
resuming" flag to various functions in the driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
