Instruction modifiers of the untyped vector memory buffer instructions
(MUBUF encoded) changed in gfx940. The slc, scc and glc modifiers have
been replaced with sc0, sc1 and nt.
The current CWSR trap handler is written using pre-gfx940 modifier
names, making the source incompatible with a strict gfx940 assembler.
This patch updates the cwsr_trap_handler_gfx9.s source file to be
compatible with all gfx9 variants of the ISA. The binary assembled code
is unchanged (so the behaviour is unchanged as well), only the source
representation is updated.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There will to release the FW twice when the FW validated error.
Even if the release_firmware() will further validate the FW whether
is empty, but that will be redundant and inefficient.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function atomctrl_get_smc_sclk_range_table() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to
retrieve SMU_Info table, it returns NULL which is later dereferenced.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In practice this should never happen as this code only gets called
on polaris chips and the vbios data table will always be present on
those chips.
Fixes: a23eefa2f4 ("drm/amd/powerplay: enable dpm for baffin.")
Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debugfs entry to enable or disable job submission to
specific vcn instances. The entry is created only when
there is more than an instance and is unified queue type.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return eeprom table checksum error result, otherwise
it might be overwritten by next call.
V2: replace DRM_ERROR with dev_err
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When using a sw cursor and flip immediate, the plane that is flipping
immediately will do partial updates causing tearing.
When on certain displays, subvp is expected based on
timings but should be disabled in specific use cases that are not
accounted for.
[HOW]
This was fixed by improving the timings check by using the hw cursor
required flag to cover the unaccounted use cases.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Peterson <peterson.guo@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The existing changes to the DPMS off flag should help reduce
accidental entry, but this change further restricts the entry condition.
[How]
Record last power state as sent to DMUB.
Don't send IPS2 allow if it's D0.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Soft hang/lag observed during 10bit playback + moving cursor, corruption
observed in other tickets for same reason, also failing MPO.
1. Currently, we are always running
calculate_lowest_supported_state_for_temp_read which is only
necessary on dGPU
2. Fast validate path does not apply DET buffer allocation policy
3. Prefetch UrgBFactor chroma parameter not populated in prefetch
calculation
[HOW]
1. Add a check to see if we are on APU, if so, skip the code
2. Add det buffer alloc policy checks to fast validate path
3. Populate UrgentBurstChroma param in call to calculate
UrgBChroma prefetch values
-revision commits: small formatting/brackets/null check addition + remove test change + dGPU code
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add "restore" missing variable in the fucntions
sdma_v4_4_2_page_resume and sdma_v4_4_2_inst_start.
This fixes the warning:
warning: Function parameter or struct member 'restore' not described in 'sdma_v4_4_2_page_resume'
warning: Function parameter or struct member 'restore' not described in 'sdma_v4_4_2_inst_start'
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of fixing the warning for missing variable
its better to update the variable name to match
with the style followed in the code.
This will fix the below mentioned warning:
warning: Function parameter or struct member 'dbuf' not described in 'amdgpu_bo_create_isp_user'
warning: Excess function parameter 'dma_buf' description in 'amdgpu_bo_create_isp_user'
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All legacy RAS bad pages are generated in NPS1 mode, but new bad page
can be generated in any NPS mode, so we can't use retired_page stored
on eeprom directly in non-nps1 mode even for legacy data. We need to
take different actions for different data, new data can be identified
from old data by UMC_CHANNEL_IDX_V2 flag.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV, when host driver performs MODE 1 reset and notifies FLR to
guest driver, there is a small chance that there is no job running on hw
but the driver has not updated the pending list yet, causing the driver
not respond the FLR request. Modify the has_job_running function to
make sure if there is still running job.
v2: Use amdgpu_fence_count_emitted to determine job running status.
v3: Remove the timeout wait in has_job_running
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Shikang Fan <shikang.fan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Add hblank borrowing support
- Limit VTotal range to max hw cap minus fp
- Correct prefetch calculation
- Add option to retrieve detile buffer size
- Add support for custom recout_width in SPL
- Add disable_ips_in_dpms_off flag for IPS
- Enable EASF based on luma taps only
- Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add support for custom recout_width for mpc combine in SPL
[HOW]
1. Rename mpc_combine_h and mpc_combine_v
2. Add flag use_recout_width_aligned to use custom recout_width
3. Create union to use either mpc_num_h_slices or mpc_recout_width_align
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It's possible we still allow IPS2 when all streams are DPMS off but this
is unexpected.
[HOW]
Pass the DM config value into DC so it can use the pure stream count
to decide. We will be in 0 streams for S0i3 so this will still allow
it for D3.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
EASF only applies to luma. Previously both luma and chroma taps
were checked to determine whether to enable EASF.
[HOW]
Only check if luma taps are supported before determining whether
to enable EASF or not.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit corrects the descriptors for the
vcn_v4_0/v4_0_3/v4_0_5/v5_0_0 _set_clockgating_state and
vcn_v4_0/v4_0_3/v4_0_5/v5_0_0 _set_powergating_state functions in the
amdgpu driver.
The parameter descriptors in the comments were mismatched with the
actual function parameters. The non-existent 'handle' parameter has been
replaced with the correct 'ip_block' parameter in the comments to
accurately reflect the function signatures and to resolving the below
with gcc W=1:
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1232: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v5_0_0_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1232: warning: Excess function parameter 'handle' description in 'vcn_v5_0_0_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1263: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v5_0_0_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1263: warning: Excess function parameter 'handle' description in 'vcn_v5_0_0_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:2012: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:2012: warning: Excess function parameter 'handle' description in 'vcn_v4_0_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:2043: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:2043: warning: Excess function parameter 'handle' description in 'vcn_v4_0_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c:1505: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_5_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c:1505: warning: Excess function parameter 'handle' description in 'vcn_v4_0_5_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c:1536: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_5_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c:1536: warning: Excess function parameter 'handle' description in 'vcn_v4_0_5_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:1629: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_3_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:1629: warning: Excess function parameter 'handle' description in 'vcn_v4_0_3_set_powergating_state'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds the missing kdoc parameter descriptor for 'inst' in the
smu_dpm_set_power_gate function.
The 'inst' parameter, which specifies the instance of the IP block to
power gate/ungate.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:359: warning: Function parameter or struct member 'inst' not described in 'smu_dpm_set_power_gate'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move all per instance variables from amdgpu_vcn to amdgpu_vcn_inst.
Move adev->vcn.fw[i] from amdgpu_vcn to amdgpu_vcn_inst.
Move adev->vcn.vcn_config[i] from amdgpu_vcn to amdgpu_vcn_inst.
Move adev->vcn.vcn_codec_disable_mask[i] from amdgpu_vcn to amdgpu_vcn_inst.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_clockgating_state() callback
functions. Modify set_clockgating_state()for all correspoding ip blocks.
v2: remove all changes for is_idle(), remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_enable_vcn() function, and change
all calls from vcn ip functions to add instance argument. vcn generations
with only one instance (v1.0, v2.0) always use 0 as instance number. vcn
generations with multiple instances (v2.5, v3.0, v4.0, v4.0.3, v4.0.5,
v5.0.0) use the actual instance number.
v2: remove for-loop in amdgpu_dpm_enable_vcn(), and temporarily move it
to vcn ip with multiple instances, in order to keep the exact same logic
as before, until further separation in next patch.
v3: fix missing prefix
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_set_powergating_by_smu() function,
and use the instance to call set_powergating_by_smu().
v2: remove duplicated functions.
remove for-loop in amdgpu_dpm_set_powergating_by_smu(), and temporarily
move it to amdgpu_dpm_enable_vcn(), in order to keep the exact same logic
as before, until further separation in next patch.
v3: drop SI logic in amdgpu_dpm_enable_vcn().
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to set_powergating_by_smu() function, and
re-write all amd_pm functions accordingly. Then use the instance to
call smu_dpm_set_vcn_enable().
v2: remove duplicated functions.
remove for-loop in smu_dpm_set_power_gate(), and temporarily move it to
to amdgpu_dpm_set_powergating_by_smu(), in order to keep the exact same
logic as before, until further separation in next patch.
v3: add instance number in error message.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
First, add an instance parameter to smu_dpm_set_vcn_enable() function,
and calling dpm_set_vcn_enable() with this given instance.
Second, modify vcn_gated to be an array, to track the gating status
for each vcn instance separately.
With these 2 changes, smu_dpm_set_vcn_enable() will check and set the
gating status for the given vcn instance ONLY.
v2: remove duplicated functions.
remove for-loop in dpm_set_vcn_enable(), and temporarily move it to
to smu_dpm_set_power_gate(), in order to keep the exact same logic as
before, until further separation in next patch.
v3: add instance number in error message.
v4: declaring i at the top of the function.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For smu ip with multiple vcn instances (smu 11/13/14), remove all the
for loop in dpm_set_vcn_enable() functions. And use the instance
argument to power up/down vcn for the given instance only, instead
of powering up/down for all vcn instances.
v2: remove all duplicated functions in v1.
remove for-loop from each ip, and temporarily move to dpm_set_vcn_enable,
in order to keep the exact same logic as before, until further separation
in the next patch.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of error after a amdgpu_gfx_rlc_enter_safe_mode() call, it is not
balanced by a corresponding amdgpu_gfx_rlc_exit_safe_mode() call.
Add the missing call.
Fixes: 9b7b8154cd ("drm/amd/powerplay: added didt support for vega10")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And implement it for UMC v12_0. The die id is calculated from IPID
register in bad page retirement flow, but we don't store it on eeprom
and it can be also gotten from physical address.
v2: get PA_C4 and PA_R13 from MCA address since they may be cleared in
retired page.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1 (legacy way): store channel index within a UMC instance in eeprom
v2: store global channel index in eeprom
V2: only save the flag on eeprom, clear it after saving.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
