Implements platform profile support for Dell laptops with new WMAX thermal
interface, present on some Alienware X-Series, Alienware M-Series and
Dell's G-Series laptops. This interface is suspected to be used by
Alienware Command Center (AWCC), which is not available for linux
systems, to manage thermal profiles.
This implementation makes use of three WMI methods, namely
THERMAL_CONTROL, THERMAL_INFORMATION and GAME_SHIFT_STATUS, which take
u32 as input and output arguments. Each method has a set of supported
operations specified in their respective enums.
Not all models with WMAX WMI interface support these methods. Because of
this, models have to manually declare support through new quirks
`thermal` for THERMAL_CONTROL and THERMAL_INFORMATION and `gmode` for
GAME_SHIFT_STATUS.
Wrappers written for these methods support multiple operations.
THERMAL_CONTROL switches thermal modes through operation
ACTIVATE_PROFILE. Available thermal codes are auto-detected at runtime
and matched against a list of known thermal codes:
Thermal Table "User Selectable Thermal Tables" (USTT):
BALANCED 0xA0
BALANCED_PERFORMANCE 0xA1
COOL 0xA2
QUIET 0xA3
PERFORMANCE 0xA4
LOW_POWER 0xA5
Thermal Table Basic:
QUIET 0x96
BALANCED 0x97
BALANCED_PERFORMANCE 0x98
PERFORMANCE 0x99
Devices are known to implement only one of these tables without mixing
their thermal codes.
The fact that the least significant digit of every thermal code is
consecutive of one another is exploited to efficiently match codes
through arrays.
Autodetection of available codes is done through operation LIST_IDS of
method THERMAL_INFORMATION. This operation lists fan IDs, CPU sensor ID,
GPU sensor ID and available thermal profile codes, *in that order*. As
number of fans and thermal codes is very model dependent, almost every
ID is scanned and matched based on conditions found on
is_wmax_thermal_code(). The known upper bound for the number of IDs is
13, corresponding to a device that have 4 fans, 2 sensors and 7 thermal
codes.
Additionally G-Series laptops have a key called G-key, which (with AWCC
proprietary driver) switches the thermal mode to an special mode named
GMODE with code 0xAB and changes Game Shift Status to 1. Game Shift is a
mode the manufacturer claims, increases gaming performance.
GAME_SHIFT_STATUS method is used to mimic this behavior when selecting
PLATFORM_PROFILE_PERFORMANCE option.
All of these profiles are known to only change fan speed profiles,
although there are untested claims that some of them also change power
profiles.
Activating a thermal mode with method THERMAL_CONTROL may cause short
hangs. This is a known problem present on every platform.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241030001124.7589-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Separate the probes for HSMP ACPI and platform device drivers.
Provide a Kconfig option to choose between ACPI or the platform device
based driver. The common code which is the core part of the HSMP driver
maintained at hsmp.c is guarded by AMD_HSMP config and is selected by
these two driver configs. This will be built into separate hsmp_common.ko
module and acpi as hsmp_acpi and plat as amd_hsmp respectively.
Also add "|| COMPILE_TEST" clause in Kconfig to get build coverage for
HSMP.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241021111428.2676884-8-suma.hegde@amd.com
[ij: Fixed doc to use pre-formatted text for the ACPI dump.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/platform/x86/ to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241017073802.53235-2-u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When performing a system shutdown under Windows, all WMI clients are
terminated. This means that the ACPI BIOS might expect all WMI devices
to be disabled when shutting down.
Emulate this behaviour by disabling all active WMI devices during
shutdown. Also introduce a new WMI driver callback to allow WMI drivers
to perform any device-specific actions before disabling the WMI device.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005213825.701887-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
