Let's introduce multi-reference pclusters at runtime. In details,
if one pcluster is requested by multiple extents at almost the same
time (even belong to different files), the longest extent will be
decompressed as representative and the other extents are actually
copied from the longest one in one round.
After this patch, fully-referenced extents can be correctly handled
and the full decoding check needs to be bypassed for
partial-referenced extents.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-17-hsiangkao@linux.alibaba.com
Currently, `pcl->length' records the longest decompressed length
as long as the pcluster itself isn't reclaimed. However, such
number is unneeded for the general cases since it doesn't indicate
the exact decompressed size in this round.
Instead, let's record the decompressed size for this round instead,
thus `pcl->nr_pages' can be completely dropped and pageofs_out is
also designed to be kept in sync with `pcl->length'.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-16-hsiangkao@linux.alibaba.com
Since all decompressed offsets have been integrated to bvecs[], this
patch avoids all sub-indexes so that page->private only includes a
part count and an eio flag, thus in the future folio->private can have
the same meaning.
In addition, PG_error will not be used anymore after this patch and
we're heading to use page->private (later folio->private) and
page->mapping (later folio->mapping) only.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-9-hsiangkao@linux.alibaba.com
For each pcluster, the total compressed buffers are determined in
advance, yet the number of decompressed buffers actually vary. Too
many decompressed pages can be recorded if one pcluster is highly
compressed or its pcluster size is large. That takes extra memory
footprints compared to uncompressed filesystems, especially a lot of
I/O in flight on low-ended devices.
Therefore, similar to inplace I/O, pagevec was introduced to reuse
page cache to store these pointers in the time-sharing way since
these pages are actually unused before decompressing.
In order to make it more flexable, a cleaner bufvec is used to
replace the old pagevec stuffs so that
- Decompressed offsets can be stored inline, thus it can be used
for the upcoming feature like compressed data deduplication.
It's calculated by `page_offset(page) - map->m_la';
- Towards supporting large folios for compressed inodes since
our final goal is to completely avoid page->private but use
folio->private only for all page cache pages.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-5-hsiangkao@linux.alibaba.com
Currently, vmap()s are avoided if physical addresses are
consecutive for decompressed buffers.
I observed that is very common for 4KiB pclusters since the
numbers of decompressed pages are almost 2 or 3.
However, such detection doesn't work for Highmem pages on
32-bit machines, let's fix it now.
Reported-by: Liu Jinbao <liujinbao1@xiaomi.com>
Fixes: 7fc45dbc93 ("staging: erofs: introduce generic decompression backend")
Link: https://lore.kernel.org/r/20220708101001.21242-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
When the user mounts the erofs second times, the decompression thread
may hung. The problem happens due to a sequence of steps like the
following:
1) Task A called z_erofs_load_lzma_config which obtain all of the node
from the z_erofs_lzma_head.
2) At this time, task B called the z_erofs_lzma_decompress and wanted to
get a node. But the z_erofs_lzma_head was empty, the Task B had to
sleep.
3) Task A release nodes and push nodes into the z_erofs_lzma_head. But
task B was still sleeping.
One example report when the hung happens:
task:kworker/u3:1 state:D stack:14384 pid: 86 ppid: 2 flags:0x00004000
Workqueue: erofs_unzipd z_erofs_decompressqueue_work
Call Trace:
<TASK>
__schedule+0x281/0x760
schedule+0x49/0xb0
z_erofs_lzma_decompress+0x4bc/0x580
? cpu_core_flags+0x10/0x10
z_erofs_decompress_pcluster+0x49b/0xba0
? __update_load_avg_se+0x2b0/0x330
? __update_load_avg_se+0x2b0/0x330
? update_load_avg+0x5f/0x690
? update_load_avg+0x5f/0x690
? set_next_entity+0xbd/0x110
? _raw_spin_unlock+0xd/0x20
z_erofs_decompress_queue.isra.0+0x2e/0x50
z_erofs_decompressqueue_work+0x30/0x60
process_one_work+0x1d3/0x3a0
worker_thread+0x45/0x3a0
? process_one_work+0x3a0/0x3a0
kthread+0xe2/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Signed-off-by: Yuwen Chen <chenyuwen1@meizu.com>
Fixes: 622ceaddb7 ("erofs: lzma compression support")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220626224041.4288-1-chenyuwen1@meizu.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Pull ARM SoC fixes from Arnd Bergmann:
"A number of fixes have accumulated, but they are largely for harmless
issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for different
firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
nodes
- Three updates to the MAINTAINERS file, including Florian Fainelli
taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
Julienne"
* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
arm: mach-spear: Add missing of_node_put() in time.c
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
MAINTAINERS: Update email address
arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
bus: bt1-axi: Don't print error on -EPROBE_DEFER
bus: bt1-apb: Don't print error on -EPROBE_DEFER
ARM: Fix refcount leak in axxia_boot_secondary
ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
ARM: dts: imx6qdl: correct PU regulator ramp delay
firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
MAINTAINERS: Update BCM2711/BCM2835 maintainer
...
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Enable ignore_missing_thread in 'perf stat', enabling counting with
'--pid' when threads disappear during counting session setup
- Adjust output data offset for backward compatibility in 'perf inject'
- Fix missing free in copy_kcore_dir() in 'perf inject'
- Fix caching files with a wrong build ID
- Sync drm, cpufeatures, vhost and svn headers with the kernel
* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools include UAPI: Sync linux/vhost.h with the kernel sources
perf stat: Enable ignore_missing_thread
perf inject: Adjust output data offset for backward compatibility
perf trace beauty: Fix generation of errno id->str table on ALT Linux
perf build-id: Fix caching files with a wrong build ID
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf inject: Fix missing free in copy_kcore_dir()
Pull btrfs fixes from David Sterba:
- zoned relocation fixes:
- fix critical section end for extent writeback, this could lead
to out of order write
- prevent writing to previous data relocation block group if space
gets low
- reflink fixes:
- fix race between reflinking and ordered extent completion
- proper error handling when block reserve migration fails
- add missing inode iversion/mtime/ctime updates on each iteration
when replacing extents
- fix deadlock when running fsync/fiemap/commit at the same time
- fix false-positive KCSAN report regarding pid tracking for read locks
and data race
- minor documentation update and link to new site
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Documentation: update btrfs list of features and link to readthedocs.io
btrfs: fix deadlock with fsync+fiemap+transaction commit
btrfs: don't set lock_owner when locking extent buffer for reading
btrfs: zoned: fix critical section of relocation inode writeback
btrfs: zoned: prevent allocation from previous data relocation BG
btrfs: do not BUG_ON() on failure to migrate space when replacing extents
btrfs: add missing inode updates on each iteration when replacing extents
btrfs: fix race between reflinking and ordered extent completion
Pull dma-mapping fix from Christoph Hellwig:
- pass the correct size to dma_set_encrypted() when freeing memory
(Dexuan Cui)
* tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: use the correct size for dma_set_encrypted()
Pull fbdev fixes from Helge Deller:
"Two bug fixes for the pxa3xx and intelfb drivers:
- pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
- intelfb: Initialize value of stolen size
The other changes are small cleanups, simplifications and
documentation updates to the cirrusfb, skeletonfb, omapfb,
intelfb, au1100fb and simplefb drivers"
* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: omap: Remove duplicate 'the' in comment
video: fbdev: omapfb: Align '*' in comment
video: fbdev: simplefb: Check before clk_put() not needed
video: fbdev: au1100fb: Drop unnecessary NULL ptr check
video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
video: fbdev: skeletonfb: Convert to generic power management
video: fbdev: cirrusfb: Remove useless reference to PCI power management
video: fbdev: intelfb: Initialize value of stolen size
video: fbdev: intelfb: Use aperture size from pci_resource_len
video: fbdev: skeletonfb: Fix syntax errors in comments
Pull parisc architecture fixes from Helge Deller:
- enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000
machines
- flush all mappings of a shared anonymous page on PA8800/8900 machines
via flushing the whole data cache. This may slow down such machines
but makes sure that the cache is consistent
- Fix duplicate definition build error regarding fb_is_primary_device()
* tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
parisc: Fix flush_anon_page on PA8800/PA8900
parisc: align '*' in comment in math-emu code
parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
Pull xtensa fixes from Max Filippov:
- fix OF reference leaks in xtensa arch code
- replace '.bss' with '.section .bss' to fix entry.S build with old
assembler
* tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: change '.bss' to '.section .bss'
xtensa: xtfpga: Fix refcount leak bug in setup
xtensa: Fix refcount leak bug in time.c
Pull powerpc fixes from Michael Ellerman:
- A fix for a CMA change that broke booting guests with > 2G RAM on
Power8 hosts.
- Fix the RTAS call filter to allow a special case that applications
rely on.
- A change to our execve path, to make the execve syscall exit
tracepoint work.
- Three fixes to wire up our various RNGs earlier in boot so they're
available for use in the initial seeding in random_init().
- A build fix for when KASAN is enabled along with
STRUCTLEAK_BYREF_ALL.
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason
Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit
Dubey2, Tyrel Datwyler, and Zi Yan.
* tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: wire up rng during setup_arch
powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN
powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
powerpc: Enable execve syscall exit tracepoint
powerpc/pseries: wire up rng during setup_arch()
powerpc/microwatt: wire up rng during setup_arch()
powerpc/mm: Move CMA reservations after initmem_init()
Pull Kbuild fixes from Masahiro Yamada:
- Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit
- Update the supported arch list in the LLVM document
- Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS
- Avoid false __KSYM___this_module define in include/generated/autoksyms.h
* tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Ignore __this_module in gen_autoksyms.sh
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
Documentation/llvm: Update Supported Arch table
modpost: fix section mismatch check for exported init/exit sections
Pull exfat fix from Namjae Jeon:
- Use updated exfat_chain directly instead of snapshot values in
rename.
* tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: use updated exfat_chain directly during renaming
Pull cifs client fixes from Steve French:
"Fixes addressing important multichannel, and reconnect issues.
Multichannel mounts when the server network interfaces changed, or ip
addresses changed, uncovered problems, especially in reconnect, but
the patches for this were held up until recently due to some lock
conflicts that are now addressed.
Included in this set of fixes:
- three fixes relating to multichannel reconnect, dynamically
adjusting the list of server interfaces to avoid problems during
reconnect
- a lock conflict fix related to the above
- two important fixes for negotiate on secondary channels (null
netname can unintentionally cause multichannel to be disabled to
some servers)
- a reconnect fix (reporting incorrect IP address in some cases)"
* tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update cifs_ses::ip_addr after failover
cifs: avoid deadlocks while updating iface
cifs: periodically query network interfaces from server
cifs: during reconnect, update interface if necessary
cifs: change iface_list from array to sorted linked list
smb3: use netname when available on secondary channels
smb3: fix empty netname context on secondary channels
To pick up the changes from:
d5af44dde5 ("x86/sev: Provide support for SNP guest request NAEs")
0afb6b660a ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
dc3f3d2474 ("x86/mm: Validate memory when changing the C-bit")
cbd3d4f7c4 ("x86/sev: Check SEV-SNP features support")
That gets these new SVM exit reasons:
+ { SVM_VMGEXIT_PSC, "vmgexit_page_state_change" }, \
+ { SVM_VMGEXIT_GUEST_REQUEST, "vmgexit_guest_request" }, \
+ { SVM_VMGEXIT_EXT_GUEST_REQUEST, "vmgexit_ext_guest_request" }, \
+ { SVM_VMGEXIT_AP_CREATION, "vmgexit_ap_creation" }, \
+ { SVM_VMGEXIT_HV_FEATURES, "vmgexit_hypervisor_feature" }, \
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
This causes these changes:
CC /tmp/build/perf-urgent/arch/x86/util/kvm-stat.o
LD /tmp/build/perf-urgent/arch/x86/util/perf-in.o
LD /tmp/build/perf-urgent/arch/x86/perf-in.o
LD /tmp/build/perf-urgent/arch/perf-in.o
LD /tmp/build/perf-urgent/perf-in.o
LINK /tmp/build/perf-urgent/perf
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
84d7c8fd3a ("vhost-vdpa: introduce uAPI to set group ASID")
2d1fcb7758 ("vhost-vdpa: uAPI to get virtqueue group id")
a0c95f2011 ("vhost-vdpa: introduce uAPI to get the number of address spaces")
3ace88bd37 ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups")
175d493c3c ("vhost: move the backend feature bits to vhost_types.h")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2022-06-26 12:04:35.982003781 -0300
+++ after 2022-06-26 12:04:43.819972476 -0300
@@ -28,6 +28,7 @@
[0x74] = "VDPA_SET_CONFIG",
[0x75] = "VDPA_SET_VRING_ENABLE",
[0x77] = "VDPA_SET_CONFIG_CALL",
+ [0x7C] = "VDPA_SET_GROUP_ASID",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
@@ -39,5 +40,8 @@
[0x76] = "VDPA_GET_VRING_NUM",
[0x78] = "VDPA_GET_IOVA_RANGE",
[0x79] = "VDPA_GET_CONFIG_SIZE",
+ [0x7A] = "VDPA_GET_AS_NUM",
+ [0x7B] = "VDPA_GET_VRING_GROUP",
[0x80] = "VDPA_GET_VQS_COUNT",
+ [0x81] = "VDPA_GET_GROUP_NUM",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Yrh3xMYbfeAD0MFL@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf already support ignore_missing_thread for -p, but not yet
applied to `perf stat -p <pid>`. This patch enables ignore_missing_thread
for `perf stat -p <pid>`.
Committer notes:
And here is a refresher about the 'ignore_missing_thread' knob, from a
previous patch using it:
ca8000684e ("perf evsel: Enable ignore_missing_thread for pid option")
---
While monitoring a multithread process with pid option, perf sometimes
may return sys_perf_event_open failure with 3(No such process) if any of
the process's threads die before we open the event. However, we want
perf continue monitoring the remaining threads and do not exit with
error.
---
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220622030037.15005-1-ligang.bdlg@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some reason using:
cat <<EoFuncBegin
static const char *errno_to_name__$arch(int err)
{
switch (err) {
EoFuncBegin
In tools/perf/trace/beauty/arch_errno_names.sh isn't working on ALT
Linux sisyphus (development version), which could be some distro
specific glitch, so just get this done in an alternative way that works
everywhere while giving notice to the people working on that distro to
try and figure our what really took place.
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Build ID events associate a file name with a build ID. However, when
using perf inject, there is no guarantee that the file on the current
machine at the current time has that build ID. Fix by comparing the
build IDs and skip adding to the cache if they are different.
Example:
$ echo "int main() {return 0;}" > prog.c
$ gcc -o prog prog.c
$ perf record --buildid-all ./prog
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data ]
$ file-buildid() { file $1 | awk -F= '{print $2}' | awk -F, '{print $1}' ; }
$ file-buildid prog
444ad9be165d8058a48ce2ffb4e9f55854a3293e
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
444ad9be165d8058a48ce2ffb4e9f55854a3293e
$ echo "int main() {return 1;}" > prog.c
$ gcc -o prog prog.c
$ file-buildid prog
885524d5aaa24008a3e2b06caa3ea95d013c0fc5
Before:
$ perf buildid-cache --purge $(pwd)/prog
$ perf inject -i perf.data -o junk
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
885524d5aaa24008a3e2b06caa3ea95d013c0fc5
$
After:
$ perf buildid-cache --purge $(pwd)/prog
$ perf inject -i perf.data -o junk
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
$
Fixes: 454c407ec1 ("perf: add perf-inject builtin")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: https://lore.kernel.org/r/20220621125144.5623-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
d6d0c7f681 ("x86/cpufeatures: Add PerfMonV2 feature bit")
296d5a17e7 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
f30903394e ("x86/cpufeatures: Add virtual TSC_AUX feature bit")
8ad7e8f696 ("x86/fpu/xsave: Support XSAVEC in the kernel")
59bd54a84d ("x86/tdx: Detect running as a TDX guest in early boot")
a77d41ac3a ("x86/cpufeatures: Add AMD Fam19h Branch Sampling feature")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YrDkgmwhLv+nKeOo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
ecf8eca51f ("drm/i915/xehp: Add compute engine ABI")
991b4de327 ("drm/i915/uapi: Add kerneldoc for engine class enum")
c94fde8f51 ("drm/i915/uapi: Add DRM_I915_QUERY_GEOMETRY_SUBSLICES")
1c671ad753 ("drm/i915/doc: Link query items to their uapi structs")
a2e5402691 ("drm/i915/doc: Convert perf UAPI comments to kerneldoc")
462ac1cdf4 ("drm/i915/doc: Convert drm_i915_query_topology_info comment to kerneldoc")
034d47b25b ("drm/i915/uapi: Document DRM_I915_QUERY_HWCONFIG_BLOB")
78e1fb3112 ("drm/i915/uapi: Add query for hwconfig blob")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: John Harrison <John.C.Harrison@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://lore.kernel.org/lkml/YrDi4ALYjv9Mdocq@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Anonymous pages are allocated with the shared mappings colouring,
SHM_COLOUR. Since the alias boundary on machines with PA8800 and
PA8900 processors is unknown, flush_user_cache_page() might not
flush all mappings of a shared anonymous page. Flushing the whole
data cache flushes all mappings.
This won't fix all coherency issues with shared mappings but it
seems to work well in practice. I haven't seen any random memory
faults in almost a month on a rp3440 running as a debian buildd
machine.
There is a small preformance hit.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.18+
Module object files can contain an undefined reference to __this_module,
which isn't resolved until we link the final .ko. The kernel doesn't
export this symbol, so ignore it in gen_autoksyms.sh.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Steve Muckle <smuckle@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Ramji Jiyani <ramjiyani@google.com>
Pull IIO driver fixes from Greg KH:
"Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
in his pull request to me, so I'll just quote it here below, as that's
the only changes we have right now for the char-misc driver tree:
testing:
- Fix a missing MODULE_LICENSE() warning by restricting possible
build configs.
Various drivers:
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
adi,admv1014:
- Fix dubious x & !y warning.
adi,axi-adc:
- Fix missing of_node_put() in error and normal paths.
aspeed,adc:
- Add missing of_node_put()
fsl,mma8452:
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset
as ACK will be missing (device reset before sending it).
fsl,vf610:
- Fix documentation of in_conversion_mode ABI.
iio-trig-sysfs:
- Ensure irq work has finished before freeing the trigger.
invensense,mpu3050:
- Disable regulators in error path.
invensense,icm42600:
- Fix collision of enum value of 0 with error path where 0 is no
match.
renesas,rzg2l_Adc:
- Add missing fwnode_handle_put() in error path.
rescale:
- Fix a boolean logic bug for detection of raw + scale affecting
an obscure corner case.
semtech,sx9324:
- Check return value of read of pin_defs
st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't
expose the vref_int channel.
- Fix maximum clock rate for stm32pm15x
ti,ads131e08:
- Add missing fwnode_handle_put() in error paths.
xilinx,ams:
- Fix variable checked for error from platform_get_irq()
x-powers,axp288:
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
yamaha,yas530:
- Fix inverted check on calibration data being all zeros.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
