perf sched map supports cpu filter.
However, even with cpu filters active, any context switch currently
corresponds to a separate line.
As result, context switches on irrelevant cpus result to redundant lines,
which makes the output particlularly difficult to read on wide
architectures.
Fix it by skipping printing for irrelevant CPUs.
Example snippet of output before fix:
*B0 1.461147 secs
B0
B0
B0
*G0 1.517139 secs
After fix:
*B0 1.461147 secs
*G0 1.517139 secs
Signed-off-by: Fernand Sieber <sieberf@amazon.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-and-tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240614073517.94974-1-sieberf@amazon.com
perf bench futex fails as below and hangs intermittently when
attempted to run on on a powerpc system:
./perf bench futex wake-parallel
Running 'futex/wake-parallel' benchmark:
Run summary [PID 88588]: blocking on 640 threads (at [private] futex 0x10464b8c), 640 threads waking up 1 at a time.
[Run 1]: Avg per-thread latency (waking 1/640 threads) in 0.1309 ms (+-53.27%)
[Run 2]: Avg per-thread latency (waking 1/640 threads) in 0.0120 ms (+-31.16%)
[Run 3]: Avg per-thread latency (waking 1/640 threads) in 0.1474 ms (+-92.47%)
[Run 4]: Avg per-thread latency (waking 1/640 threads) in 0.2883 ms (+-67.75%)
[Run 5]: Avg per-thread latency (waking 1/640 threads) in 0.4108 ms (+-39.60%)
[Run 6]: Avg per-thread latency (waking 1/640 threads) in 0.7843 ms (+-78.98%)
perf: couldn't wakeup all tasks (0/1)
perf: couldn't wakeup all tasks (0/1)
perf: couldn't wakeup all tasks (0/1)
perf: couldn't wakeup all tasks (0/1)
perf: couldn't wakeup all tasks (0/1)
perf: couldn't wakeup all tasks (0/1)
In the system, where perf bench wake-up-parallel is has system
configuration of 640 cpus. After debugging, this turned out to be
a timing issue. The benchmark creates threads equal to number of
cpus and issues a futex_wait. Then it does a usleep for .1 second
before initiating futex_wake. In system configuration with more
threads, the usleep time is not enough. Patch changes the usleep
from 100000 to 200000
With the patch, ran multiple iterations and there were no issues
further seen
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240607044354.82225-3-atrajeev@linux.vnet.ibm.com
Perf bench epoll fails as below when attempted to run on
on a powerpc system:
./perf bench epoll wait
Running 'epoll/wait' benchmark:
Run summary [PID 627653]: 79 threads monitoring on 64 file-descriptors for 8 secs.
perf: pthread_create: No such file or directory
In the setup where this perf bench was ran, difference was that
partition had 640 CPU's, but not all CPUs were online. 80 CPUs
were online. While creating threads and using epoll_wait , code
sets the affinity using cpumask. The cpumask size used is 80
which is picked from "nrcpus = perf_cpu_map__nr(cpu)". Here the
benchmark reports fail while setting affinity for cpu number which
is greater than 80 or higher, because it attempts to set a bit
position which is not allocated on the cpumask. Fix this by changing
the size of cpumask to number of possible cpus and not the number
of online cpus.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240607044354.82225-2-atrajeev@linux.vnet.ibm.com
Perf bench futex fails as below when attempted to run on
on a powerpc system:
./perf bench futex all
Running futex/hash benchmark...
Run summary [PID 626307]: 80 threads, each operating on 1024 [private] futexes for 10 secs.
perf: pthread_create: No such file or directory
In the setup where this perf bench was ran, difference was that
partition had 640 CPU's, but not all CPUs were online. 80 CPUs
were online. While blocking the threads with futex_wait, code
sets the affinity using cpumask. The cpumask size used is 80
which is picked from "nrcpus = perf_cpu_map__nr(cpu)". Here the
benchmark reports fail while setting affinity for cpu number which
is greater than 80 or higher, because it attempts to set a bit
position which is not allocated on the cpumask. Fix this by changing
the size of cpumask to number of possible cpus and not the number
of online cpus.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240607044354.82225-1-atrajeev@linux.vnet.ibm.com
Tool events unnecessarily open a dummy perf event which is useless
even with `perf record` which will still open a dummy event. Change
the behavior of tool events so:
- duration_time - call `rdclock` on open and then report the count as
a delta since the start in evsel__read_counter. This moves code out
of builtin-stat making it more general purpose.
- user_time/system_time - open the fd as either `/proc/pid/stat` or
`/proc/stat` for cases like system wide. evsel__read_counter will
read the appropriate field out of the procfs file. These values
were previously supplied by wait4, if the procfs read fails then
the wait4 values are used, assuming the process/thread terminated.
By reading user_time and system_time this way, interval mode, per
PID and per CPU can be supported although there are restrictions
given what the files provide (e.g. per PID can't be combined with
per CPU).
Opening any of the tool events for `perf record` is changed to return
invalid.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240503232849.17752-1-irogers@google.com
On some s390 linux machine (mostly older models) and with debug
packages installed, the test case 'perf annotate basic tests' runs
for some longer time.
Speed up the test and save the output of command perf annotate
in a temporary file. This is used to perform pattern matching via
grep command. This saves on invocation of perf annotate which
runs for some time.
Output before:
# time bash -x tests/shell/annotate.sh >/dev/null 2>&1; echo EXIT CODE $?
real 4m35.543s
user 3m19.442s
sys 1m14.322s
EXIT CODE 0
#
Output after:
# time bash -x tests/shell/annotate.sh >/dev/null 2>&1; echo EXIT CODE $?
real 2m2.881s
user 1m30.980s
sys 0m30.684s
EXIT CODE 0
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240607054352.2774936-1-tmricht@linux.ibm.com
When multiple aggregation options are passed to perf stat the behavior
isn't clear. Consider "perf stat -A --per-socket .." and "perf stat
--per-socket -A ..", the first won't aggregate at all while the second
will do per-socket aggregation, even though the same options were
passed.
Rather than set an enum value, gather the options in a struct and
process them from most to least aggregate. This ensures the least
aggregate option always applies, so no aggregation if "-A" is passed.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240605063828.195700-2-irogers@google.com
Reduce the scope of stat_options to cmd_stat, and pass as an argument
to __cmd_record. This is done to make more localized changes to the
options in later patches. A side-effect of the change is to reduce the
size of a stripped PIE perf binary by 5952 bytes. The savings come
mainly in the dynamic relocation section.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240605063828.195700-1-irogers@google.com
Data may have lots of overlapping mmaps. The regular insert adds at
the end and relies on a later sort. For data with overlapping mappings
the sort will happen during a subsequent maps__find or
__maps__fixup_overlap_and_insert, there's never a period where the
inserted maps buffer up and a single sort happens. To avoid back to
back sorts, maintain the sort order when fixing up and
inserting. Previously the first_ending_after search was O(log n) where
n is the size of maps, and the insert was O(1) but because of the
continuous sorting was becoming O(n*log(n)). With maintaining sort
order, the insert now becomes O(n) for a memmove.
For a perf report on a perf.data file containing overlapping mappings
the time numbers are:
Before:
real 0m5.894s
user 0m5.650s
sys 0m0.231s
After:
real 0m0.675s
user 0m0.454s
sys 0m0.196s
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Steinar H . Gunderson <sesse@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240521165109.708593-4-irogers@google.com
When an 'after' map is generated the 'new' map must be before it so
terminate iterating and don't resort. If the entry 'pos' is entirely
overlapped by the 'new' mapping then don't remove and insert the
mapping, just replace - again to remove sorting.
For a perf report on a perf.data file containing overlapping mappings
the time numbers are:
Before:
real 0m9.856s
user 0m9.637s
sys 0m0.204s
After:
real 0m5.894s
user 0m5.650s
sys 0m0.231s
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Steinar H . Gunderson <sesse@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240521165109.708593-3-irogers@google.com
Compiling perf tool with 'DEBUG_PARSER=1' leads to errors:
$> make -C tools/perf PARSER_DEBUG=1 NO_LIBTRACEEVENT=1
...
CC util/expr-flex.o
CC util/expr.o
util/parse-events.c:33:12: error: redundant redeclaration of ‘parse_events_debug’ [-Werror=redundant-decls]
33 | extern int parse_events_debug;
| ^~~~~~~~~~~~~~~~~~
In file included from util/parse-events.c:18:
util/parse-events-bison.h:43:12: note: previous declaration of ‘parse_events_debug’ with type ‘int’
43 | extern int parse_events_debug;
| ^~~~~~~~~~~~~~~~~~
util/expr.c:27:12: error: redundant redeclaration of ‘expr_debug’ [-Werror=redundant-decls]
27 | extern int expr_debug;
| ^~~~~~~~~~
In file included from util/expr.c:11:
util/expr-bison.h:43:12: note: previous declaration of ‘expr_debug’ with type ‘int’
43 | extern int expr_debug;
| ^~~~~~~~~~
cc-1: all warnings being treated as errors
Remove extern declaration from the parse-envents.c file as there is a
conflict with the ones generated using bison and yacc tools from the file
parse-events.[ly].
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240605140453.614862-1-clement.legoffic@foss.st.com
Allow filters to be added to perf top events. One use is to workaround
issues with:
```
$ perf top --uid="$(id -u)"
```
which tries to scan /proc find processes belonging to the uid and can
fail in such a pid terminates between the scan and the
perf_event_open reporting:
```
Error:
The sys_perf_event_open() syscall returned with 3 (No such process) for event (cycles:P).
/bin/dmesg | grep -i perf may provide additional information.
```
A similar filter:
```
$ perf top -e cycles:P --filter "uid == $(id -u)"
```
doesn't fail this way.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240524205227.244375-4-irogers@google.com
In general a read fills 4kb so filling the buffer is a 1 in 4096
operation, move it out of the io__get_char function to avoid some
checking overhead and to better hint the function is good to inline.
For perf's IO intensive internal (non-rigorous) benchmarks there's a
small improvement to kallsyms-parsing with a default build.
Before:
```
$ perf bench internals all
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 146.322 usec (+- 0.305 usec)
Average num. events: 61.000 (+- 0.000)
Average time per event 2.399 usec
Average data synthesis took: 145.056 usec (+- 0.155 usec)
Average num. events: 329.000 (+- 0.000)
Average time per event 0.441 usec
Average kallsyms__parse took: 162.313 ms (+- 0.599 ms)
...
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 53.720 usec (+- 7.823 usec)
Average PMU scanning took: 375.145 usec (+- 23.974 usec)
```
After:
```
$ perf bench internals all
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 127.829 usec (+- 0.079 usec)
Average num. events: 61.000 (+- 0.000)
Average time per event 2.096 usec
Average data synthesis took: 133.652 usec (+- 0.101 usec)
Average num. events: 327.000 (+- 0.000)
Average time per event 0.409 usec
Average kallsyms__parse took: 150.415 ms (+- 0.313 ms)
...
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 47.790 usec (+- 1.178 usec)
Average PMU scanning took: 376.945 usec (+- 23.683 usec)
```
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240519181716.4088459-1-irogers@google.com
PROT_NONE is also useful information, so do not omit the mmap prot even
though it is 0. syscall_arg__scnprintf_mmap_prot() could print PROT_NONE
for prot 0.
Before: PROT_NONE is not shown.
$ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0 -- ls
0.000 ls/2979231 syscalls:sys_enter_mmap(len: 4220888, flags: PRIVATE|ANONYMOUS)
After: PROT_NONE is displayed.
$ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0 -- ls
0.000 ls/2975708 syscalls:sys_enter_mmap(len: 4220888, prot: NONE, flags: PRIVATE|ANONYMOUS)
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240522033542.1359421-3-changbin.du@huawei.com
Currently, the --no-desc option in perf list isn't functioning as
intended.
This issue arises from the overwriting of struct option->desc with the
opposite value of struct option->long_desc. Consequently, whatever
parse_options() returns at struct option->desc gets overridden later,
rendering the --desc or --no-desc arguments ineffective.
To resolve this, set ->desc as true by default and allow parse_options()
to adjust it accordingly. This adjustment will fix the --no-desc
option while preserving the functionality of the other parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: leit@meta.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240517141427.1905691-1-leitao@debian.org
The mrvl_ddr_pmu is uncore and has a hexadecimal address suffix while
the previous PMU sorting/merging code assumes uncore PMU names start
with uncore_ and have a decimal suffix. Because of the previous
assumption it isn't possible to wildcard the mrvl_ddr_pmu.
Modify pmu_name_len_no_suffix but also remove the suffix number out
argument, this is because we don't know if a suffix number of say 100
is in hexadecimal or decimal. As the only use of the suffix number is
in comparisons, it is safe there to compare the values as hexadecimal.
Modify perf_pmu__match_ignoring_suffix so that hexadecimal suffixes
are ignored.
Only allow hexadecimal suffixes to be greater than length 2 (ie 3 or
more) so that S390's cpum_cf PMU doesn't lose its suffix.
Change the return type of pmu_name_len_no_suffix to size_t to
workaround GCC incorrectly determining the result could be negative.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: Bhaskara Budiredla <bbudiredla@marvell.com>
Cc: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515060114.3268149-2-irogers@google.com
percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.
This fixes a randconfig build error on mips:
include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc22a ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf tool fix from Arnaldo Carvalho de Melo:
"Revert a patch causing a regression.
This made a simple 'perf record -e cycles:pp make -j199' stop working
on the Ampere ARM64 system Linus uses to test ARM64 kernels".
* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
Pull smb client fixes from Steve French:
- two important netfs integration fixes - including for a data
corruption and also fixes for multiple xfstests
- reenable swap support over SMB3
* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix missing set of remote_i_size
cifs: Fix smb3_insert_range() to move the zero_point
cifs: update internal version number
smb3: reenable swapfiles over SMB3 mounts
Pull misc fixes from Andrew Morton:
"16 hotfixes, 11 of which are cc:stable.
A few nilfs2 fixes, the remainder are for MM: a couple of selftests
fixes, various singletons fixing various issues in various parts"
* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/ksm: fix possible UAF of stable_node
mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
nilfs2: fix potential hang in nilfs_detach_log_writer()
nilfs2: fix unexpected freezing of nilfs_segctor_sync()
nilfs2: fix use-after-free of timer for log writer thread
selftests/mm: fix build warnings on ppc64
arm64: patching: fix handling of execmem addresses
selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
selftests/mm: compaction_test: fix bogus test success on Aarch64
mailmap: update email address for Satya Priya
mm/huge_memory: don't unpoison huge_zero_folio
kasan, fortify: properly rename memintrinsics
lib: add version into /proc/allocinfo output
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
Pull irq fixes from Ingo Molnar:
- Fix x86 IRQ vector leak caused by a CPU offlining race
- Fix build failure in the riscv-imsic irqchip driver
caused by an API-change semantic conflict
- Fix use-after-free in irq_find_at_or_after()
* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
Pull x86 fixes from Ingo Molnar:
- Fix regressions of the new x86 CPU VFM (vendor/family/model)
enumeration/matching code
- Fix crash kernel detection on buggy firmware with
non-compliant ACPI MADT tables
- Address Kconfig warning
* tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
crypto: x86/aes-xts - switch to new Intel CPU model defines
x86/topology: Handle bogus ACPI tables correctly
x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
Pull ipmi updates from Corey Minyard:
"Mostly updates for deprecated interfaces, platform.remove and
converting from a tasklet to a BH workqueue.
Also use HAS_IOPORT for disabling inb()/outb()"
* tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void
ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void
ipmi: ipmi_ssif: Convert to platform remove callback returning void
ipmi: ipmi_si_platform: Convert to platform remove callback returning void
ipmi: ipmi_powernv: Convert to platform remove callback returning void
ipmi: bt-bmc: Convert to platform remove callback returning void
char: ipmi: handle HAS_IOPORT dependencies
ipmi: Convert from tasklet to BH workqueue
Pull ceph updates from Ilya Dryomov:
"A series from Xiubo that adds support for additional access checks
based on MDS auth caps which were recently made available to clients.
This is needed to prevent scenarios where the MDS quietly discards
updates that a UID-restricted client previously (wrongfully) acked to
the user.
Other than that, just a documentation fixup"
* tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client:
doc: ceph: update userspace command to get CephFS metadata
ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit
ceph: check the cephx mds auth access for async dirop
ceph: check the cephx mds auth access for open
ceph: check the cephx mds auth access for setattr
ceph: add ceph_mds_check_access() helper
ceph: save cap_auths in MDS client when session is opened
Pull ntfs3 updates from Konstantin Komarov:
"Fixes:
- reusing of the file index (could cause the file to be trimmed)
- infinite dir enumeration
- taking DOS names into account during link counting
- le32_to_cpu conversion, 32 bit overflow, NULL check
- some code was refactored
Changes:
- removed max link count info display during driver init
Remove:
- atomic_open has been removed for lack of use"
* tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Break dir enumeration if directory contents error
fs/ntfs3: Fix case when index is reused during tree transformation
fs/ntfs3: Mark volume as dirty if xattr is broken
fs/ntfs3: Always make file nonresident on fallocate call
fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode
fs/ntfs3: Use variable length array instead of fixed size
fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow
fs/ntfs3: Check 'folio' pointer for NULL
fs/ntfs3: Missed le32_to_cpu conversion
fs/ntfs3: Remove max link count info display during driver init
fs/ntfs3: Taking DOS names into account during link counting
fs/ntfs3: remove atomic_open
fs/ntfs3: use kcalloc() instead of kzalloc()
Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both for stable"
* tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: ignore trailing slashes in share paths
ksmbd: avoid to send duplicate oplock break notifications
Pull RTC updates from Alexandre Belloni:
"There is one new driver and then most of the changes are the device
tree bindings conversions to yaml.
New driver:
- Epson RX8111
Drivers:
- Many Device Tree bindings conversions to dtschema
- pcf8563: wakeup-source support"
* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
pcf8563: add wakeup-source support
rtc: rx8111: handle VLOW flag
rtc: rx8111: demote warnings to debug level
rtc: rx6110: Constify struct regmap_config
dt-bindings: rtc: convert trivial devices into dtschema
dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
dt-bindings: rtc: pxa-rtc: convert to dtschema
rtc: Add driver for Epson RX8111
dt-bindings: rtc: Add Epson RX8111
rtc: mcp795: drop unneeded MODULE_ALIAS
rtc: nuvoton: Modify part number value
rtc: test: Split rtc unit test into slow and normal speed test
dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
dt-bindings: rtc: armada-380-rtc: convert to dtschema
rtc: cros-ec: provide ID table for avoiding fallback match
Pull i3c updates from Alexandre Belloni:
"Runtime PM (power management) is improved and hot-join support has
been added to the dw controller driver.
Core:
- Allow device driver to trigger controller runtime PM
Drivers:
- dw: hot-join support
- svc: better IBI handling"
* tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: dw: Add hot-join support.
i3c: master: Enable runtime PM for master controller
i3c: master: svc: fix invalidate IBI type and miss call client IBI handler
i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame
i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()
Pull UML updates from Richard Weinberger:
- Fixes for -Wmissing-prototypes warnings and further cleanup
- Remove callback returning void from rtc and virtio drivers
- Fix bash location
* tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (26 commits)
um: virtio_uml: Convert to platform remove callback returning void
um: rtc: Convert to platform remove callback returning void
um: Remove unused do_get_thread_area function
um: Fix -Wmissing-prototypes warnings for __vdso_*
um: Add an internal header shared among the user code
um: Fix the declaration of kasan_map_memory
um: Fix the -Wmissing-prototypes warning for get_thread_reg
um: Fix the -Wmissing-prototypes warning for __switch_mm
um: Fix -Wmissing-prototypes warnings for (rt_)sigreturn
um: Stop tracking host PID in cpu_tasks
um: process: remove unused 'n' variable
um: vector: remove unused len variable/calculation
um: vector: fix bpfflash parameter evaluation
um: slirp: remove set but unused variable 'pid'
um: signal: move pid variable where needed
um: Makefile: use bash from the environment
um: Add winch to winch_handlers before registering winch IRQ
um: Fix -Wmissing-prototypes warnings for __warp_* and foo
um: Fix -Wmissing-prototypes warnings for text_poke*
um: Move declarations to proper headers
...
Pull drm fixes from Dave Airlie:
"Some fixes for the end of the merge window, mostly amdgpu and panthor,
with one nouveau uAPI change that fixes a bad decision we made a few
months back.
nouveau:
- fix bo metadata uAPI for vm bind
panthor:
- Fixes for panthor's heap logical block.
- Reset on unrecoverable fault
- Fix VM references.
- Reset fix.
xlnx:
- xlnx compile and doc fixes.
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
dp/mst:
- MST null deref fix.
bridge:
- Don't let next bridge create connector in adv7511 to make probe
work"
* tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu/atomfirmware: add intergrated info v2.3 table
drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs
drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms
drm/bridge: adv7511: Attach next bridge without creating connector
drm/buddy: Fix the warn on's during force merge
drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations
drm/panthor: Call panthor_sched_post_reset() even if the reset failed
drm/panthor: Reset the FW VM to NULL on unplug
drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level
drm/panthor: Force an immediate reset on unrecoverable faults
drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints
drm/panthor: Fix an off-by-one in the heap context retrieval logic
drm/panthor: Relax the constraints on the tiler chunk size
drm/panthor: Make sure the tiler initial/max chunks are consistent
drm/panthor: Fix tiler OOM handling to allow incremental rendering
drm: xlnx: zynqmp_dpsub: Fix compilation error
drm: xlnx: zynqmp_dpsub: Fix few function comments
Occasionally, the generic/001 xfstest will fail indicating corruption in
one of the copy chains when run on cifs against a server that supports
FSCTL_DUPLICATE_EXTENTS_TO_FILE (eg. Samba with a share on btrfs). The
problem is that the remote_i_size value isn't updated by cifs_setsize()
when called by smb2_duplicate_extents(), but i_size *is*.
This may cause cifs_remap_file_range() to then skip the bit after calling
->duplicate_extents() that sets sizes.
Fix this by calling netfs_resize_file() in smb2_duplicate_extents() before
calling cifs_setsize() to set i_size.
This means we don't then need to call netfs_resize_file() upon return from
->duplicate_extents(), but we also fix the test to compare against the pre-dup
inode size.
[Note that this goes back before the addition of remote_i_size with the
netfs_inode struct. It should probably have been setting cifsi->server_eof
previously.]
Fixes: cfc63fc812 ("smb3: fix cached file size problems in duplicate extents (reflink)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull more mm updates from Andrew Morton:
"Jeff Xu's implementation of the mseal() syscall"
* tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftest mm/mseal read-only elf memory segment
mseal: add documentation
selftest mm/mseal memory sealing
mseal: add mseal syscall
mseal: wire up mseal syscall
