Patch series "Add folio_mk_pte()", v2.
Today if you have a folio and want to create a PTE that points to the
first page in it, you have to convert from a folio to a page. That's
zero-cost today but will be more expensive in the future.
I didn't want to add folio_mk_pte() to each architecture, and I didn't
want to lose any optimisations that architectures have from their own
implementation of mk_pte(). Fortunately, most architectures have by now
turned their mk_pte() into a fairly bland variant of pfn_pte(), but s390
has a special optimisation that needs to be moved into generic code in the
first patch.
At the end of this patch set, we have mk_pte() and folio_mk_pte() in mm.h
and each architecture only has to implement pfn_pte(). We've also
eliminated mk_huge_pte(), mk_huge_pmd() and mk_pmd().
This patch (of 11):
If the first access to a folio is a read that is then followed by a write,
we can save a page fault. s390 implemented this in their mk_pte() in
commit abf09bed3c ("s390/mm: implement software dirty bits"), but other
architectures can also benefit from this.
Link: https://lkml.kernel.org/r/20250402181709.2386022-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20250402181709.2386022-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # for s390
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In dirty_ratio_handler(), vm_dirty_bytes must be set to zero before
calling writeback_set_ratelimit(), as global_dirty_limits() always
prioritizes the value of vm_dirty_bytes.
It's domain_dirty_limits() that's relevant here, not node_dirty_ok:
dirty_ratio_handler
writeback_set_ratelimit
global_dirty_limits(&dirty_thresh) <- ratelimit_pages based on dirty_thresh
domain_dirty_limits
if (bytes) <- bytes = vm_dirty_bytes <--------+
thresh = f1(bytes) <- prioritizes vm_dirty_bytes |
else |
thresh = f2(ratio) |
ratelimit_pages = f3(dirty_thresh) |
vm_dirty_bytes = 0 <- it's late! ---------------------+
This causes ratelimit_pages to still use the value calculated based on
vm_dirty_bytes, which is wrong now.
The impact visible to userspace is difficult to capture directly because
there is no procfs/sysfs interface exported to user space. However, it
will have a real impact on the balance of dirty pages.
For example:
1. On default, we have vm_dirty_ratio=40, vm_dirty_bytes=0
2. echo 8192 > dirty_bytes, then vm_dirty_bytes=8192,
vm_dirty_ratio=0, and ratelimit_pages is calculated based on
vm_dirty_bytes now.
3. echo 20 > dirty_ratio, then since vm_dirty_bytes is not reset to
zero when writeback_set_ratelimit() -> global_dirty_limits() ->
domain_dirty_limits() is called, reallimit_pages is still calculated
based on vm_dirty_bytes instead of vm_dirty_ratio. This does not
conform to the actual intent of the user.
Link: https://lkml.kernel.org/r/20250415090232.7544-1-alexjlzheng@tencent.com
Fixes: 9d823e8f6b ("writeback: per task dirty rate limit")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: MengEn Sun <mengensun@tencent.com>
Cc: Andrea Righi <andrea@betterlinux.com>
Cc: Fenggaung Wu <fengguang.wu@intel.com>
Cc: Jinliang Zheng <alexjlzheng@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Do not mix class->size and object size during offsets/sizes calculation in
zs_obj_write(). Size classes can merge into clusters, based on
objects-per-zspage and pages-per-zspage characteristics, so some size
classes can store objects smaller than class->size. This becomes
problematic when object size is much smaller than class->size. zsmalloc
can falsely decide that object spans two physical pages, because a larger
class->size value is used for that check, while the actual object is much
smaller and fits the free space of the first physical page, so there is
nothing to write to the second page and memcpy() size calculation
underflows.
Unable to handle kernel paging request at virtual address ffffc00081ff4000
pc : __memcpy+0x10/0x24
lr : zs_obj_write+0x1b0/0x1d0 [zsmalloc]
Call trace:
__memcpy+0x10/0x24 (P)
zram_write_page+0x150/0x4fc [zram]
zram_submit_bio+0x5e0/0x6a4 [zram]
__submit_bio+0x168/0x220
submit_bio_noacct_nocheck+0x128/0x2c8
submit_bio_noacct+0x19c/0x2f8
This is mostly seen on system with larger page-sizes, because size class
cluters of such systems hold wider size ranges than on 4K PAGE_SIZE
systems.
Assume a 16K PAGE_SIZE system, a write of 820 bytes object to a 864-bytes
size class at offset 15560. 15560 + 864 is more than 16384 so zsmalloc
attempts to memcpy() it to two physical pages. However, 16384 - 15560 =
824 which is more than 820, so the object in fact doesn't span two
physical pages, and there is no data to write to the second physical page.
We always know the exact size in bytes of the object that we are about to
write (store), so use it instead of class->size.
Link: https://lkml.kernel.org/r/20250507054312.4135983-1-senozhatsky@chromium.org
Fixes: 44f7641349 ("zsmalloc: introduce new object mapping API")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Igor Belousov <igor.b@beldev.am>
Tested-by: Igor Belousov <igor.b@beldev.am>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page allocator tracks the number of zones that have unaccepted memory
using static_branch_enc/dec() and uses that static branch in hot paths to
determine if it needs to deal with unaccepted memory.
Borislav and Thomas pointed out that the tracking is racy: operations on
static_branch are not serialized against adding/removing unaccepted pages
to/from the zone.
Sanity checks inside static_branch machinery detects it:
WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0
The comment around the WARN() explains the problem:
/*
* Warn about the '-1' case though; since that means a
* decrement is concurrent with a first (0->1) increment. IOW
* people are trying to disable something that wasn't yet fully
* enabled. This suggests an ordering problem on the user side.
*/
The effect of this static_branch optimization is only visible on
microbenchmark.
Instead of adding more complexity around it, remove it altogether.
Link: https://lkml.kernel.org/r/20250506133207.1009676-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: dcdfdd40fa ("mm: Add support for unaccepted memory")
Link: https://lore.kernel.org/all/20250506092445.GBaBnVXXyvnazly6iF@fat_crate.local
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 51ff4d7486 ("mm: avoid extra mem_alloc_profiling_enabled()
checks") introduces a possible use-after-free scenario, when page
is non-compound, page[0] could be released by other thread right
after put_page_testzero failed in current thread, pgalloc_tag_sub_pages
afterwards would manipulate an invalid page for accounting remaining
pages:
[timeline] [thread1] [thread2]
| alloc_page non-compound
V
| get_page, rf counter inc
V
| in ___free_pages
| put_page_testzero fails
V
| put_page, page released
V
| in ___free_pages,
| pgalloc_tag_sub_pages
| manipulate an invalid page
V
Restore __free_pages() to its state before, retrieve alloc tag
beforehand.
Link: https://lkml.kernel.org/r/20250505193034.91682-1-00107082@163.com
Fixes: 51ff4d7486 ("mm: avoid extra mem_alloc_profiling_enabled() checks")
Signed-off-by: David Wang <00107082@163.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Not intuitive, but vm_area_dup() located in kernel/fork.c is not only used
for duplicating VMAs during fork(), but also for duplicating VMAs when
splitting VMAs or when mremap()'ing them.
VM_PFNMAP mappings can at least get ordinarily mremap()'ed (no change in
size) and apparently also shrunk during mremap(), which implies
duplicating the VMA in __split_vma() first.
In case of ordinary mremap() (no change in size), we first duplicate the
VMA in copy_vma_and_data()->copy_vma() to then call untrack_pfn_clear() on
the old VMA: we effectively move the VM_PAT reservation. So the
untrack_pfn_clear() call on the new VMA duplicating is wrong in that
context.
Splitting of VMAs seems problematic, because we don't duplicate/adjust the
reservation when splitting the VMA. Instead, in memtype_erase() -- called
during zapping/munmap -- we shrink a reservation in case only the end
address matches: Assume we split a VMA into A and B, both would share a
reservation until B is unmapped.
So when unmapping B, the reservation would be updated to cover only A.
When unmapping A, we would properly remove the now-shrunk reservation.
That scenario describes the mremap() shrinking (old_size > new_size),
where we split + unmap B, and the untrack_pfn_clear() on the new VMA when
is wrong.
What if we manage to split a VM_PFNMAP VMA into A and B and unmap A first?
It would be broken because we would never free the reservation. Likely,
there are ways to trigger such a VMA split outside of mremap().
Affecting other VMA duplication was not intended, vm_area_dup() being used
outside of kernel/fork.c was an oversight. So let's fix that for; how to
handle VMA splits better should be investigated separately.
With a simple reproducer that uses mprotect() to split such a VMA I can
trigger
x86/PAT: pat_mremap:26448 freeing invalid memtype [mem 0x00000000-0x00000fff]
Link: https://lkml.kernel.org/r/20250422144942.2871395-1-david@redhat.com
Fixes: dc84bc2aba ("x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During our testing with hugetlb subpool enabled, we observe that
hstate->resv_huge_pages may underflow into negative values. Root cause
analysis reveals a race condition in subpool reservation fallback handling
as follow:
hugetlb_reserve_pages()
/* Attempt subpool reservation */
gbl_reserve = hugepage_subpool_get_pages(spool, chg);
/* Global reservation may fail after subpool allocation */
if (hugetlb_acct_memory(h, gbl_reserve) < 0)
goto out_put_pages;
out_put_pages:
/* This incorrectly restores reservation to subpool */
hugepage_subpool_put_pages(spool, chg);
When hugetlb_acct_memory() fails after subpool allocation, the current
implementation over-commits subpool reservations by returning the full
'chg' value instead of the actual allocated 'gbl_reserve' amount. This
discrepancy propagates to global reservations during subsequent releases,
eventually causing resv_huge_pages underflow.
This problem can be trigger easily with the following steps:
1. reverse hugepage for hugeltb allocation
2. mount hugetlbfs with min_size to enable hugetlb subpool
3. alloc hugepages with two task(make sure the second will fail due to
insufficient amount of hugepages)
4. with for a few seconds and repeat step 3 which will make
hstate->resv_huge_pages to go below zero.
To fix this problem, return corrent amount of pages to subpool during the
fallback after hugepage_subpool_get_pages is called.
Link: https://lkml.kernel.org/r/20250410062633.3102457-1-mawupeng1@huawei.com
Fixes: 1c5ecae3a9 ("hugetlbfs: add minimum size accounting to subpools")
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Tested-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ma Wupeng <mawupeng1@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
Pull x86 fix from Ingo Molnar:
"Fix a boot regression on very old x86 CPUs without CPUID support"
* tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Consolidate the loader enablement checking
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
Pull memblock fixes from Mike Rapoport:
- Mark set_high_memory() as __init to fix section mismatch
- Accept memory allocated in memblock_double_array() to mitigate crash
of SNP guests
* tag 'fixes-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Accept allocated memory before use in memblock_double_array()
mm,mm_init: Mark set_high_memory as __init
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a regression for platform devices
that is a regression from a change that went into 6.15-rc1 that
affected Pixel devices. It has been in linux-next for over a week with
no reported problems"
* tag 'driver-core-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
platform: Fix race condition during DMA configure at IOMMU probe time
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.15-rc6. Included in here
are:
- typec driver fixes
- usbtmc ioctl fixes
- xhci driver fixes
- cdnsp driver fixes
- some gadget driver fixes
Nothing really major, just all little stuff that people have reported
being issues. All of these have been in linux-next this week with no
reported issues"
* tag 'usb-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive.
usb: xhci: Don't trust the EP Context cycle bit when moving HW dequeue
usb: usbtmc: Fix erroneous generic_read ioctl return
usb: usbtmc: Fix erroneous wait_srq ioctl return
usb: usbtmc: Fix erroneous get_stb ioctl error returns
usb: typec: tcpm: delay SNK_TRY_WAIT_DEBOUNCE to SRC_TRYWAIT transition
USB: usbtmc: use interruptible sleep in usbtmc_read
usb: cdnsp: fix L1 resume issue for RTL_REVISION_NEW_LPM version
usb: typec: ucsi: displayport: Fix NULL pointer access
usb: typec: ucsi: displayport: Fix deadlock
usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs
usb: uhci-platform: Make the clock really optional
usb: dwc3: gadget: Make gadget_wakeup asynchronous
usb: gadget: Use get_status callback to set remote wakeup capability
usb: gadget: f_ecm: Add get_status callback
usb: host: tegra: Prevent host controller crash when OTG port is used
usb: cdnsp: Fix issue with resuming from L1
usb: gadget: tegra-xudc: ACK ST_RC after clearing CTRL_RUN
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.15-rc6. These are:
- bcm2835-camera driver fix
- two axis-fifo driver fixes
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'staging-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: Remove hardware resets for user errors
staging: axis-fifo: Correct handling of tx_fifo_depth for size validation
staging: bcm2835-camera: Initialise dev in v4l2_dev
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues"
* tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
uio_hv_generic: Fix sysfs creation path for ring buffer
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
...
Pull i2c fixes from Wolfram Sang:
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
* tag 'i2c-for-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Remove entry for Seth Heasley
i2c: omap: fix deprecated of_property_read_bool() use
Pull xen fixes from Juergen Gross:
- A fix for the xenbus driver allowing to use a PVH Dom0 with
Xenstore running in another domain
- A fix for the xenbus driver addressing a rare race condition
resulting in NULL dereferences and other problems
- A fix for the xen-swiotlb driver fixing a problem seen on Arm
platforms
* tag 'for-linus-6.15a-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Use kref to track req lifetime
xenbus: Allow PVH dom0 a non-local xenstore
xen: swiotlb: Use swiotlb bouncing if kmalloc allocation demands it
Pull mount fixes from Al Viro:
"A couple of races around legalize_mnt vs umount (both fairly old and
hard to hit) plus two bugs in move_mount(2) - both around 'move
detached subtree in place' logics"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix IS_MNT_PROPAGATING uses
do_move_mount(): don't leak MNTNS_PROPAGATING on failures
do_umount(): add missing barrier before refcount checks in sync case
__legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock
KVM x86 fixes for 6.15-rcN
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
- When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
Pull smb client fixes from Steve French:
- Fix dentry leak which can cause umount crash
- Add warning for parse contexts error on compounded operation
* tag '6.15-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Avoid race in open_cached_dir with lease breaks
smb3 client: warn when parse contexts returns error on compounded operation
propagate_mnt() does not attach anything to mounts created during
propagate_mnt() itself. What's more, anything on ->mnt_slave_list
of such new mount must also be new, so we don't need to even look
there.
When move_mount() had been introduced, we've got an additional
class of mounts to skip - if we are moving from anon namespace,
we do not want to propagate to mounts we are moving (i.e. all
mounts in that anon namespace).
Unfortunately, the part about "everything on their ->mnt_slave_list
will also be ignorable" is not true - if we have propagation graph
A -> B -> C
and do OPEN_TREE_CLONE open_tree() of B, we get
A -> [B <-> B'] -> C
as propagation graph, where B' is a clone of B in our detached tree.
Making B private will result in
A -> B' -> C
C still gets propagation from A, as it would after making B private
if we hadn't done that open_tree(), but now the propagation goes
through B'. Trying to move_mount() our detached tree on subdirectory
in A should have
* moved B' on that subdirectory in A
* skipped the corresponding subdirectory in B' itself
* copied B' on the corresponding subdirectory in C.
As it is, the logics in propagation_next() and friends ends up
skipping propagation into C, since it doesn't consider anything
downstream of B'.
IOW, walking the propagation graph should only skip the ->mnt_slave_list
of new mounts; the only places where the check for "in that one
anon namespace" are applicable are propagate_one() (where we should
treat that as the same kind of thing as "mountpoint we are looking
at is not visible in the mount we are looking at") and
propagation_would_overmount(). The latter is better dealt with
in the caller (can_move_mount_beneath()); on the first call of
propagation_would_overmount() the test is always false, on the
second it is always true in "move from anon namespace" case and
always false in "move within our namespace" one, so it's easier
to just use check_mnt() before bothering with the second call and
be done with that.
Fixes: 064fe6e233 ("mount: handle mount propagation for detached mount trees")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
as it is, a failed move_mount(2) from anon namespace breaks
all further propagation into that namespace, including normal
mounts in non-anon namespaces that would otherwise propagate
there.
Fixes: 064fe6e233 ("mount: handle mount propagation for detached mount trees")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
do_umount() analogue of the race fixed in 119e1ef80e "fix
__legitimize_mnt()/mntput() race". Here we want to make sure that
if __legitimize_mnt() doesn't notice our lock_mount_hash(), we will
notice their refcount increment. Harder to hit than mntput_no_expire()
one, fortunately, and consequences are milder (sync umount acting
like umount -l on a rare race with RCU pathwalk hitting at just the
wrong time instead of use-after-free galore mntput_no_expire()
counterpart used to be hit). Still a bug...
Fixes: 48a066e72d ("RCU'd vfsmounts")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... or we risk stealing final mntput from sync umount - raising mnt_count
after umount(2) has verified that victim is not busy, but before it
has set MNT_SYNC_UMOUNT; in that case __legitimize_mnt() doesn't see
that it's safe to quietly undo mnt_count increment and leaves dropping
the reference to caller, where it'll be a full-blown mntput().
Check under mount_lock is needed; leaving the current one done before
taking that makes no sense - it's nowhere near common enough to bother
with.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull rust fixes from Miguel Ojeda:
- Make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88.0
- Clean Rust (and Clippy) lints for the upcoming Rust 1.87.0 and 1.88.0
releases
- Clean objtool warning for the upcoming Rust 1.87.0 release by adding
one more noreturn function
* tag 'rust-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
x86/Kconfig: make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88
rust: clean Rust 1.88.0's `clippy::uninlined_format_args` lint
rust: clean Rust 1.88.0's warning about `clippy::disallowed_macros` configuration
rust: clean Rust 1.88.0's `unnecessary_transmutes` lint
rust: allow Rust 1.87.0's `clippy::ptr_eq` lint
objtool/rust: add one more `noreturn` Rust function for Rust 1.87.0
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, bit bigger than last week, but overall amdgpu/xe
with some ivpu bits and a random few fixes, and dropping the
ttm_backup struct which wrapped struct file and was recently
frowned at.
drm:
- Fix overflow when generating wedged event
ttm:
- Fix documentation
- Remove struct ttm_backup
panel:
- simple: Fix timings for AUO G101EVN010
amdgpu:
- DC FP fixes
- Freesync fix
- DMUB AUX fixes
- VCN fix
- Hibernation fixes
- HDP fixes
xe:
- Prevent PF queue overflow
- Hold all forcewake during mocs test
- Remove GSC flush on reset path
- Fix forcewake put on error path
- Fix runtime warning when building without svm
i915:
- Fix oops on resume after disconnecting DP MST sinks during suspend
- Fix SPLC num_waiters refcounting
ivpu:
- Increase timeouts
- Fix deadlock in cmdq ioctl
- Unlock mutices in correct order
v3d:
- Avoid memory leak in job handling"
* tag 'drm-fixes-2025-05-10' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation
drm/xe: Add config control for svm flush work
drm/xe: Release force wake first then runtime power
drm/xe/gsc: do not flush the GSC worker from the reset path
drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs
drm/xe: Add page queue multiplier
drm/amdgpu/hdp7: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp6: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp5.2: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp5: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp4: use memcfg register to post the write for HDP flush
drm/amdgpu: fix pm notifier handling
Revert "drm/amd: Stop evicting resources on APUs in suspend"
drm/amdgpu/vcn: using separate VCN1_AON_SOC offset
drm/amd/display: Fix wrong handling for AUX_DEFER case
drm/amd/display: Copy AUX read reply data whenever length > 0
drm/amd/display: Remove incorrect checking in dmub aux handler
drm/amd/display: Fix the checking condition in dmub aux handling
drm/amd/display: Shift DMUB AUX reply command if necessary
drm/amd/display: Call FP Protect Before Mode Programming/Mode Support
...
Pull arm64 fix from Catalin Marinas:
"Move the arm64_use_ng_mappings variable from the .bss to the .data
section as it is accessed very early during boot with the MMU off and
before the .bss has been initialised.
This could lead to incorrect idmap page table"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpufeature: Move arm64_use_ng_mappings to the .data section to prevent wrong idmap generation
Pull RISC-V fixes from Palmer Dabbelt:
- The compressed half-word misaligned access instructions (c.lhu, c.lh,
and c.sh) from the Zcb extension are now properly emulated
- A series of fixes to properly emulate permissions while handling
userspace misaligned accesses
- A pair of fixes for PR_GET_TAGGED_ADDR_CTRL to avoid accessing the
envcfg CSR on systems that don't support that CSR, and to report
those failures up to userspace
- The .rela.dyn section is no longer stripped from vmlinux, as it is
necessary to relocate the kernel under some conditions (including
kexec)
* tag 'riscv-for-linus-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Disallow PR_GET_TAGGED_ADDR_CTRL without Supm
scripts: Do not strip .rela.dyn section
riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL
riscv: misaligned: use get_user() instead of __get_user()
riscv: misaligned: enable IRQs while handling misaligned accesses
riscv: misaligned: factorize trap handling
riscv: misaligned: Add handling for ZCB instructions
Pull block fixes from Jens Axboe:
- Fix for a regression in this series for loop and read/write iterator
handling
- zone append block update tweak
- remove a broken IO priority test
- NVMe pull request via Christoph:
- unblock ctrl state transition for firmware update (Daniel
Wagner)
* tag 'block-6.15-20250509' of git://git.kernel.dk/linux:
block: remove test of incorrect io priority level
nvme: unblock ctrl state transition for firmware update
block: only update request sector if needed
loop: Add sanity check for read/write_iter
Pull io_uring fixes from Jens Axboe:
- Fix for linked timeouts arming and firing wrt prep and issue of the
request being managed by the linked timeout
- Fix for a CQE ordering issue between requests with multishot and
using the same buffer group. This is a dumbed down version for this
release and for stable, it'll get improved for v6.16
- Tweak the SQPOLL submit batch size. A previous commit made SQPOLL
manage its own task_work and chose a tiny batch size, bump it from 8
to 32 to fix a performance regression due to that
* tag 'io_uring-6.15-20250509' of git://git.kernel.dk/linux:
io_uring/sqpoll: Increase task_work submission batch size
io_uring: ensure deferred completions are flushed for multishot
io_uring: always arm linked timeouts prior to issue
