The ast HW cursor requires the primary plane and CRTC to display at
a valid mode and format. This is not the case while switching
display modes, which can lead to the screen turing permanently dark.
As a workaround, the ast driver now disables active planes while the
mode or format switch takes place. It also synchronizes with the vertical
refresh to give CRTC and planes some time to catch up on each other.
The active planes planes (primary or cursor) will be re-enabled by
each plane's atomic_update() function.
v3:
* move the logic into the CRTC's atomic_disable function
v2:
* move the logic into the commit-tail function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de
The atomic modesetting code tried to distinguish format changes from
full modesetting operations. But the implementation was buggy and the
format registers were often updated even for simple pageflips.
Fix this problem by handling format changes in the primary plane's
update function.
v3:
* program format in primary plane's update function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-2-tzimmermann@suse.de
The lcdif IP does not support a framebuffer pitch (stride) other than
framebuffer width. Check for equality and reject the framebuffer
otherwise.
This prevents a distorted picture when using 640x800 and running the
Mesa graphics stack. Mesa tries to use a cache aligned stride, which
leads at that particular resolution to width != stride. Currently
Mesa has no fallback behavior, but rejecting this configuration allows
userspace to handle the issue correctly.
Fixes: 45d59d7040 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908141654.266836-1-stefan@agner.ch
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl)
-> drm_helper_probe_single_connector_modes
-> drm_bridge_connector_get_modes
-> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before
get_edid(), the driver will not be able to get the EDID properly and
display will not work until a second get_edid() call is issued and if
pre_enable() is called before. The side effect of this, for example, is
that you see anything when `Frecon` starts, neither the splash screen,
until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before
reading the EDID. This means the following:
1. If get_edid() is called before having the device powered we need to
power on the device. In such case, the driver will power off again the
device.
2. If get_edid() is called after having the device powered, all should
just work. We added a powered flag in order to avoid recurrent calls
to ps8640_bridge_poweron() and unneeded delays.
3. This seems to be specific for this device, but we need to make sure
the panel is powered on before do a power on cycle on this device.
Otherwise the device fails to retrieve the EDID.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827085911.944899-2-enric.balletbo@collabora.com
Ingenic SoCs are most notably used in cheap chinese handheld gaming
consoles. There, the games and applications generally render in software
directly into GEM buffers.
Traditionally, GEM buffers are mapped write-combine. Writes to the
buffer are accelerated, and reads are slow. Application doing lots of
alpha-blending paint inside shadow buffers, which is then memcpy'd into
the final GEM buffer.
On recent Ingenic SoCs however, it is much faster to have a fully cached
GEM buffer, in which applications paint directly, and whose data is
invalidated before scanout, than having a write-combine GEM buffer, even
when alpha blending is not used.
Add an optional 'cached_gem_buffers' parameter to the ingenic-drm driver
to allow GEM buffers to be mapped fully-cached, in order to speed up
software rendering.
v2: Use standard noncoherent DMA APIs
v3: Use damage clips instead of invalidating full frames
v4: Avoid dma_pgprot() which is not exported. Using vm_get_page_prot()
is enough in this case.
v5:
- Avoid calling drm_gem_cma_prime_mmap(). It has the side effect that an
extra object reference is obtained, which causes our dumb buffers to
never be freed. It should have been drm_gem_cma_mmap_obj(). However,
our custom mmap function only differs with one flag, so we can cleanly
handle both modes in ingenic_drm_gem_mmap().
- Call drm_gem_vm_close() if drm_mmap_attrs() failed, just like in
drm_gem_cma_mmap_obj().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912195639.176001-1-paul@crapouillou.net
We update the timestamping constants per-crtc explicitly in
intel_crtc_update_active_timings(). Furtermore the helper will
use uapi.adjusted_mode whereas we want hw.adjusted_mode. Thus
let's drop the helper call an rely on what we already have in
intel_crtc_update_active_timings(). We can now also drop the
hw.adjusted_mode -> uapi.adjusted_mode copy hack that was added
to keep the helper from deriving the timestamping constants from
the wrong thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The timestamping constants have nothing to do with any legacy state
so should not be updated from
drm_atomic_helper_update_legacy_modeset_state().
Let's make everyone call drm_atomic_helper_calc_timestamping_constants()
directly instead of relying on
drm_atomic_helper_update_legacy_modeset_state() to call it.
@@
expression S;
@@
- drm_atomic_helper_calc_timestamping_constants(S);
@@
expression D, S;
@@
drm_atomic_helper_update_legacy_modeset_state(D, S);
+ drm_atomic_helper_calc_timestamping_constants(S);
v2: Update drm_crtc_vblank_helper_get_vblank_timestamp{,_internal}() docs (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paul needs 1a21e5b930 ("drm/ingenic: Fix leak of device_node
pointer") and 3b5b005ef7 ("drm/ingenic: Fix driver not probing when
IPU port is missing") from -fixes to be able to merge further ingenic
patches into -next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
VRAM helpers support ref counting for pin and vmap operations, no need
to avoid these operations by employing the internal kmap interface. Just
use drm_gem_vram_vmap() and let it handle the details.
Also unexport the kmap interfaces from VRAM helpers. Vboxvideo was the
last user of these internal functions.
v2:
* fixed a comma in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075922.19317-1-tzimmermann@suse.de
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes I've been accruing over the last few weeks, none
of them have been severe enough to warrant flushing the queue but it's
been long enough now that it's a good idea to send them in.
A handful of them are fixups for QSPI DT/bindings/compatibles, some
smaller fixes for system DMA clock control and TMU interrupts on i.MX,
a handful of fixes for OMAP, including a fix for DSI (display) on
omap5"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
arm64: dts: ns2: Fixed QSPI compatible string
ARM: dts: BCM5301X: Fixed QSPI compatible string
ARM: dts: NSP: Fixed QSPI compatible string
ARM: dts: bcm: HR2: Fixed QSPI compatible string
dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
arm64: dts: imx8mp: correct sdma1 clk setting
arm64: dts: imx8mq: Fix TMU interrupt property
ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy
ARM: dts: vfxxx: Add syscon compatible with OCOTP
ARM: dts: imx6q-logicpd: Fix broken PWM
arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build
ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name
ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells
ARM: dts: imx7ulp: Correct gpio ranges
ARM: dts: ls1021a: fix QuadSPI-memory reg range
arm64: defconfig: Enable ptn5150 extcon driver
arm64: defconfig: Enable USB gadget with configfs
ARM: configs: Update Integrator defconfig
ARM: dts: omap5: Fix DSI base address and clocks
...
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 5.9-rc5.
Nothing huge, just a number of bugfixes and new device ids for
problems reported:
- new USB serial driver ids
- bug fixes for syzbot reported problems
- typec driver fixes
- thunderbolt driver fixes
- revert of reported broken commit
All of these have been in linux-next with no reported issues"
* tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes
usb: typec: intel_pmc_mux: Do not configure Altmode HPD High
usb: core: fix slab-out-of-bounds Read in read_descriptors
Revert "usb: dwc3: meson-g12a: fix shared reset control use"
usb: typec: ucsi: acpi: Check the _DEP dependencies
usb: typec: intel_pmc_mux: Un-register the USB role switch
usb: Fix out of sync data toggle if a configured device is reconfigured
USB: serial: option: support dynamic Quectel USB compositions
USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
thunderbolt: Use maximum USB3 link rate when reclaiming if link is not up
thunderbolt: Disable ports that are not implemented
USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
Pull staging/IIO driver fixes from Greg KH:
"Here are a number of staging and IIO driver fixes for 5.9-rc5.
The majority of these are IIO driver fixes, to resolve a timestamp
issue that was recently found to affect a bunch of IIO drivers.
The other fixes in here are:
- small IIO driver fixes
- greybus driver fix
- counter driver fix (came in through the IIO fixes tree)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
iio: adc: mcp3422: fix locking on error path
iio: adc: mcp3422: fix locking scope
iio: adc: meson-saradc: Use the parent device to look up the calib data
iio:adc:max1118 Fix alignment of timestamp and data leak issues
iio:adc:ina2xx Fix timestamp alignment issue.
iio:adc:ti-adc084s021 Fix alignment and data leak issues.
iio:adc:ti-adc081c Fix alignment and data leak issues
iio:magnetometer:ak8975 Fix alignment and data leak issues.
iio:light:ltr501 Fix timestamp alignment issue.
iio:light:max44000 Fix timestamp alignment and prevent data leak.
iio:chemical:ccs811: Fix timestamp alignment and prevent data leak.
iio:proximity:mb1232: Fix timestamp alignment and prevent data leak.
iio:accel:mma7455: Fix timestamp alignment and prevent data leak.
iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.
iio:accel:mma8452: Fix timestamp alignment and prevent data leak.
iio: accel: kxsd9: Fix alignment of local buffer.
iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER
iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set
counter: microchip-tcb-capture: check the correct variable
iio: cros_ec: Set Gyroscope default frequency to 25Hz
...
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 5.9-rc5
Included in here are:
- firmware loader memory leak fix
- firmware loader testing fixes for non-EFI systems
- device link locking fixes found by lockdep
- kobject_del() bugfix that has been affecting some callers
- debugfs minor fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
test_firmware: Test platform fw loading on non-EFI systems
PM: <linux/device.h>: fix @em_pd kernel-doc warning
kobject: Drop unneeded conditional in __kobject_del()
driver core: Fix device_pm_lock() locking for device links
MAINTAINERS: Add the security document to SECURITY CONTACT
driver code: print symbolic error code
debugfs: Fix module state check condition
kobject: Restore old behaviour of kobject_del(NULL)
firmware_loader: fix memory leak for paged buffer
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.9, please pull the following:
- Florian fixes the Broadcom QSPI controller binding such that the most
specific compatible string is the left most one, and all existing
in-tree users are updated as well.
* tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: ns2: Fixed QSPI compatible string
ARM: dts: BCM5301X: Fixed QSPI compatible string
ARM: dts: NSP: Fixed QSPI compatible string
ARM: dts: bcm: HR2: Fixed QSPI compatible string
dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
Link: https://lore.kernel.org/r/20200909211857.4144718-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX fixes for 5.9, round 2:
- Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node.
- Correct 'ahb' clock for i.MX8MP SDMA1 in device tree.
- Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX.
* tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
arm64: dts: imx8mp: correct sdma1 clk setting
arm64: dts: imx8mq: Fix TMU interrupt property
Link: https://lore.kernel.org/r/20200909143844.GA25109@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
Fixes for omaps for v5.9-rc cycle
Few fixes for omap based devices:
- Fix of_clk_get() error handling for omap-iommu
- Fix missing audio pinctrl entries for logicpd boards
- Fix video for logicpd-som-lv after switch to generic panels
- Fix omap5 DSI clocks base
* tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap5: Fix DSI base address and clocks
ARM: dts: logicpd-som-lv-baseboard: Fix missing video
ARM: dts: logicpd-som-lv-baseboard: Fix broken audio
ARM: dts: logicpd-torpedo-baseboard: Fix broken audio
ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm()
Link: https://lore.kernel.org/r/pull-1599132064-54898@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull char / misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 5.9-rc5
Included in here are:
- habanalabs driver fixes
- interconnect driver fixes
- soundwire driver fixes
- dyndbg fixes for reported issues, and then reverts to fix it all up
to a sane state.
- phy driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "dyndbg: accept query terms like file=bar and module=foo"
Revert "dyndbg: fix problem parsing format="foo bar""
scripts/tags.sh: exclude tools directory from tags generation
video: fbdev: fix OOB read in vga_8planes_imageblit()
dyndbg: fix problem parsing format="foo bar"
dyndbg: refine export, rename to dynamic_debug_exec_queries()
dyndbg: give %3u width in pr-format, cosmetic only
interconnect: qcom: Fix small BW votes being truncated to zero
soundwire: fix double free of dangling pointer
interconnect: Show bandwidth for disabled paths as zero in debugfs
habanalabs: fix report of RAZWI initiator coordinates
habanalabs: prevent user buff overflow
phy: omap-usb2-phy: disable PHY charger detect
phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init
soundwire: bus: fix typo in comment on INTSTAT registers
phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe()
phy: qualcomm: fix platform_no_drv_owner.cocci warnings
Pull kvm fixes from Paolo Bonzini:
"A bit on the bigger side, mostly due to me being on vacation, then
busy, then on parental leave, but there's nothing worrisome.
ARM:
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: emulator: more strict rsm checks.
KVM: nSVM: more strict SMM checks when returning to nested guest
SVM: nSVM: setup nested msr permission bitmap on nested state load
SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
x86/kvm: don't forget to ACK async PF IRQ
x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
KVM: SVM: avoid emulation with stale next_rip
KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
KVM: SVM: Periodically schedule when unregistering regions on destroy
KVM: MIPS: Change the definition of kvm type
kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
KVM: fix memory leak in kvm_io_bus_unregister_dev()
KVM: Check the allocation of pv cpu mask
KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
KVM: arm64: Update page shift if stage 2 block mapping not supported
KVM: arm64: Fix address truncation in traces
KVM: arm64: Do not try to map PUDs when they are folded into PMD
arm64/x86: KVM: Introduce steal-time cap
...
Pull OpenRISC fixes from Stafford Horne:
"Fixes for compile issues pointed out by kbuild and one bug I found in
initrd with the 5.9 patches"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Fix issue with get_user for 64-bit values
openrisc: Fix cache API compile issue when not inlining
openrisc: Reserve memblock for initrd
