We may not need to pull in a btree node when walking backpointers -
don't do so unnecessarily when using backpointer_get_key().
It'll still fall back to backpointer_get_node() in a few situations,
including btree roots (where an iterator can't point at just the key),
and races due to the interior update path not having deleted a
backpointer to an old node yet.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Rework the read path so that BCH_READ_NODECODE reads now also self-heal
after a read error and a successful retry - prerequisite for scrub.
- __bch2_read_endio() now handles a read that's both BCH_READ_NODECODE
and a bounce.
Normally, we don't want a BCH_READ_NODECODE read to ever allocate a
split bch_read_bio: we want to maintain the relationship between the
bch_read_bio and the data_update it's embedded in.
But correcting read errors requires allocating a split/bounce rbio
that's embedded in a promote_op. We do still have a 1-1 relationship,
i.e. we only allocate a single split/bounce if it's a
BCH_READ_NODECODE, so things hopefully don't get too crazy.
- __bch2_read_extent() now is allowed to allocate the promote_op for
rewriting after a failed read, even if it's BCH_READ_NODECODE.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
we don't want to block completion of the read - starting a promote calls
into the write path, which will block.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a data update doesn't want to block on allocations (promotes, self
healing on read error) - check if the allocation would fail before
kicking off the data update and calling into the write path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Initialize the write op first, so that in the next patch we can check if
the allocator would block (for BCH_WRITE_alloc_nowait ops) and bail out
before taking nocow locks/dev refs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a drive is failing and we're moving data off of it, we can't
necessairly depend on capacity/disk reservation calculations to avoid
deadlocking/blocking on the allocator.
And, we don't want to queue up infinite self healing moves anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Promotes, like most other internal moves, should only go to the
specified target and not fall back to allocating from the full
filesystem.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that data_update embeds bch_read_bio, BCH_READ_NODECODE means that
the read is embedded in a a data_update - and we can check in the retry
path if the extent has changed and bail out.
This likely fixes some subtle bugs with read errors and data moves.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new helper for bch2_moving_ctxt_to_text(), which may be used to
debug if moving_ios are getting stuck.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add an ioctl for querying counters, the same ones provided in
/sys/fs/bcachefs/<uuid>/counters/, but more suitable for a 'bcachefs
top' command.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Persistent counters, like recovery passes, include a stable enum in
their definition - but this was never correctly plumbed.
This allows us to add new counters and properly organize them with a
non-stable "presentation order", which can also be used in userspace by
the new 'bcachefs fs top' tool.
Fortunatel, since we haven't yet added any new counters where
presentation order ID doesn't match stable ID, this won't cause any
reordering issues.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We've got per-writepoint statistics to see how well the writepoint index
update threads are pipelining; this separates running vs. runnable so we
can see at a glance if they're blocking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This makes 'bcachefs fs top' more useful; we can now see at a glance
whether the IO to the device is being done for user reads/writes, or
copygc/rebalance.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Early version of 'bcachefs_metadata_version_cached_backpointers' was
creating backpointers for stale cached pointers - whoops. Now we have to
repair those.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Factor out get_iter_to_node() and use it for
btree_node_rewrite_get_iter(), to be used for fixing btree node write
error behaviour.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs removed most PAGE_SIZE references long ago, so this is easy;
only readpage_bio_extend() has to be tweaked to respect the minimum
order.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bare 64 bit divides not allowed, whoops
arm-linux-gnueabi-ld: drivers/char/random.o: in function `__get_random_u64_below':
drivers/char/random.c:602:(.text+0xc70): undefined reference to `__aeabi_uldivmod'
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We just had a report of the assert for "btree in write buffer for
non-write buffer btree" popping during the 6.14 upgrade.
- 150TB filesystem, after a reboot the upgrade was able to continue from
where it left off, so no major damage.
But with 6.14 about to come out we want to get this tracked down asap,
and need more data if other users hit this.
Convert the BUG_ON() to an emergency read-only, and print out btree, the
key itself, and stack trace from the original write buffer update (which
did not have this check before).
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
get_random_u32_below() has a better algorithm than bch2_rand_range(),
it just didn't exist at the time.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull Kbuild fixes from Masahiro Yamada:
- Use the specified $(LD) when building userprogs with Clang
- Pass the correct target triple when compile-testing UAPI headers
with Clang
- Fix pacman-pkg build error with KBUILD_OUTPUT
* tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT
docs: Kconfig: fix defconfig description
kbuild: hdrcheck: fix cross build with clang
kbuild: userprogs: use correct lld when linking through clang
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues. These
contain:
- typec driver fixes
- dwc3 driver fixes
- xhci driver fixes
- renesas controller fixes
- gadget driver fixes
- a new USB quirk added
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer access
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
usb: xhci: Fix host controllers "dying" after suspend and resume
usb: dwc3: Set SUSPENDENABLE soon after phy init
usb: hub: lack of clearing xHC resources
usb: renesas_usbhs: Flush the notify_hotplug_work
usb: renesas_usbhs: Use devm_usb_get_phy()
usb: renesas_usbhs: Call clk_put()
usb: dwc3: gadget: Prevent irq storm when TH re-executes
usb: gadget: Check bmAttributes only if configuration is valid
xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts
usb: xhci: Enable the TRB overfetch quirk on VIA VL805
usb: gadget: Fix setting self-powered state on suspend
usb: typec: ucsi: increase timeout for PPM reset operations
acpi: typec: ucsi: Introduce a ->poll_cci method
usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality
usb: gadget: Set self-powered based on MaxPower and bmAttributes
usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails
usb: atm: cxacru: fix a flaw in existing endpoint checks
Pull driver core fix from Greg KH:
"Here is a single driver core fix that resolves a reported memory leak.
It's been in linux-next for 2 weeks now with no reported problems"
* tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: fix device leak in __fw_devlink_relax_cycles()
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
KVM/arm64 fixes for 6.14, take #4
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
Pull more x86 fixes from Ingo Molnar:
- Add more model IDs to the AMD microcode version check, more people
are hitting these checks
- Fix a Xen guest boot warning related to AMD northbridge setup
- Fix SEV guest bugs related to a recent changes in its locking logic
- Fix a missing definition of PTRS_PER_PMD that assembly builds can hit
* tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add some forgotten models to the SHA check
x86/mm: Define PTRS_PER_PMD for assembly code too
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
virt: sev-guest: Allocate request data dynamically
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
Pull LoongArch fixes from Huacai Chen:
"Fix bugs in kernel build, hibernation, memory management and KVM"
* tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix GPA size issue about VM
LoongArch: KVM: Reload guest CSR registers after sleep
LoongArch: KVM: Add interrupt checking for AVEC
LoongArch: Set hugetlb mmap base address aligned with pmd size
LoongArch: Set max_pfn with the PFN of the last page
LoongArch: Use polling play_dead() when resuming from hibernation
LoongArch: Eliminate superfluous get_numa_distances_cnt()
LoongArch: Convert unreachable() to BUG()
