Georgi writes:
interconnect changes for 6.3
Here are the interconnect changes for the 6.3-rc1 merge window with the
significant part being new drivers.
Driver changes:
- New driver for Qualcomm SM8550
- New driver for Qualcomm QDU1000/QRU1000
- New driver for Qualcomm SDM670
- New driver for Qualcomm SA8775P
- Drop the IP0 interconnects and migrate them to RPMh clocks instead
- Misc improvements in the DT schema for some existing drivers
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (25 commits)
dt-bindings: interconnect: samsung,exynos-bus: allow opp-table
dt-bindings: interconnect: qcom,sa8775p-rpmh: fix a typo
dt-bindings: interconnect: Exclude all non msm8939 from snoc-mm
interconnect: qcom: add a driver for sa8775p
dt-bindings: interconnect: qcom: document the interconnects for sa8775p
interconnect: qcom: add sdm670 interconnects
dt-bindings: interconnect: add sdm670 interconnects
dt-bindings: interconnect: OSM L3: Add SM6350 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: document SM8550 compatibles
dt-bindings: interconnect: split SM8450 to own schema
dt-bindings: interconnect: split SC8280XP to own schema
dt-bindings: interconnect: split SC7280 to own schema
dt-bindings: interconnect: qcom: drop IPA_CORE related defines
dt-bindings: interconnect: qcom: Remove ipa-virt compatibles
interconnect: qcom: sc8280xp: Drop IP0 interconnects
interconnect: qcom: sc8180x: Drop IP0 interconnects
interconnect: qcom: sm8250: Drop IP0 interconnects
interconnect: qcom: sm8150: Drop IP0 interconnects
interconnect: move ignore_list out of of_count_icc_providers()
interconnect: qcom: sc7180: drop IP0 remnants
...
* icc-dt
dt-bindings: interconnect: split SC7280 to own schema
dt-bindings: interconnect: split SC8280XP to own schema
dt-bindings: interconnect: split SM8450 to own schema
dt-bindings: interconnect: qcom-bwmon: document SM8550 compatibles
dt-bindings: interconnect: OSM L3: Add SM6350 OSM L3 compatible
dt-bindings: interconnect: Exclude all non msm8939 from snoc-mm
dt-bindings: interconnect: samsung,exynos-bus: allow opp-table
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Commits 2f3724930e ("interconnect: qcom: sc7180: Drop IP0
interconnects") and 2fb251c265 ("interconnect: qcom: sdx55: Drop IP0
interconnects") removed IP0 interconnects (and ipa-virt devices support)
in favour of the RPMH clocks. Follow this example for other platforms
defining IP0 RPMH resource. While we are at it, remove several leftover
from the mentioned patches.
* icc-ip0-migration:
interconnect: qcom: sdx55: drop IP0 remnants
interconnect: qcom: sc7180: drop IP0 remnants
interconnect: move ignore_list out of of_count_icc_providers()
interconnect: qcom: sm8150: Drop IP0 interconnects
interconnect: qcom: sm8250: Drop IP0 interconnects
interconnect: qcom: sc8180x: Drop IP0 interconnects
interconnect: qcom: sc8280xp: Drop IP0 interconnects
dt-bindings: interconnect: qcom: Remove ipa-virt compatibles
dt-bindings: interconnect: qcom: drop IPA_CORE related defines
Link: https://lore.kernel.org/r/20230109002935.244320-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Pull USB fixes from Greg KH:
"Here are some small USB fixes that resolve some reported problems.
These include:
- gadget driver fixes
- dwc3 driver fix
- typec driver fix
- MAINTAINERS file update.
All of these have been in linux-next with no reported problems"
* tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Don't attempt to resume the ports before they exist
usb: gadget: udc: do not clear gadget driver.bus
usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints
usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait
usb: dwc3: qcom: enable vbus override when in OTG dr-mode
MAINTAINERS: Add myself as UVC Gadget Maintainer
Pull tty/serial driver fixes from Greg KH:
"Here are some small serial and vt fixes. These include:
- 8250 driver fixes relating to dma issues
- stm32 serial driver fix for threaded irqs
- vc_screen bugfix for reported problems.
All have been in linux-next for a while with no reported problems"
* tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF
serial: 8250_dma: Fix DMA Rx rearm race
serial: 8250_dma: Fix DMA Rx completion race
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/whatever driver fixes. They
include:
- IIO driver fixes for some reported problems
- nvmem driver fixes
- fpga driver fixes
- debugfs memory leak fix in the hv_balloon and irqdomain code
(irqdomain change was acked by the maintainer)
All have been in linux-next with no reported problems"
* tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
HV: hv_balloon: fix memory leak with using debugfs_lookup()
nvmem: qcom-spmi-sdam: fix module autoloading
nvmem: core: fix return value
nvmem: core: fix cell removal on error
nvmem: core: fix device node refcounting
nvmem: core: fix registration vs use race
nvmem: core: fix cleanup after dev_set_name()
nvmem: core: remove nvmem_config wp_gpio
nvmem: core: initialise nvmem->id early
nvmem: sunxi_sid: Always use 32-bit MMIO reads
nvmem: brcm_nvram: Add check for kzalloc
iio: imu: fxos8700: fix MAGN sensor scale and unit
iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
iio: imu: fxos8700: fix failed initialization ODR mode assignment
iio: imu: fxos8700: fix incorrect ODR mode readback
iio: light: cm32181: Fix PM support on system with 2 I2C resources
iio: hid: fix the retval in gyro_3d_capture_sample
iio: hid: fix the retval in accel_3d_capture_sample
iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
...
Pull fbdev fixes from Helge Deller:
- fix fbcon to prevent fonts bigger than 32x32 pixels to avoid
overflows reported by syzbot
- switch omapfb to use kstrtobool()
- switch some fbdev drivers to use the backlight helpers
* tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Check font dimension limits
fbdev: omapfb: Use kstrtobool() instead of strtobool()
fbdev: fbmon: fix function name in kernel-doc
fbdev: atmel_lcdfb: Rework backlight status updates
fbdev: riva: Use backlight helper
fbdev: omapfb: panel-dsi-cm: Use backlight helper
fbdev: nvidia: Use backlight helper
fbdev: mx3fb: Use backlight helper
fbdev: radeon: Use backlight helper
fbdev: atyfb: Use backlight helper
fbdev: aty128fb: Use backlight helper
Pull x86 fix from Borislav Petkov:
- Prevent the compiler from reordering accesses to debug regs which
could cause a #VC exception in SEV-ES guests at the wrong place in
the NMI handling path
* tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses
Pull perf fix from Borislav Petkov:
- Lock the proper critical section when dealing with perf event context
* tag 'perf_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_event_pmu_context serialization
Pull powerpc fixes from Michael Ellerman:
"It's a bit of a big batch for rc6, but just because I didn't send any
fixes the last week or two while I was on vacation, next week should
be quieter:
- Fix a few objtool warnings since we recently enabled objtool.
- Fix a deadlock with the hash MMU vs perf record.
- Fix perf profiling of asynchronous interrupt handlers.
- Revert the IMC PMU nest_init_lock to being a mutex.
- Two commits fixing problems with the kexec_file FDT size
estimation.
- Two commits fixing problems with strict RWX vs kernels running at
non-zero.
- Reconnect tlb_flush() to hash__tlb_flush()
Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy,
and Sourabh Jain"
* tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush()
powerpc/kexec_file: Count hot-pluggable memory in FDT estimate
powerpc/64s/radix: Fix RWX mapping with relocated kernel
powerpc/64s/radix: Fix crash with unaligned relocated kernel
powerpc/kexec_file: Fix division by zero in extra size estimation
powerpc/imc-pmu: Revert nest_init_lock to being a mutex
powerpc/64: Fix perf profiling asynchronous interrupt handlers
powerpc/64s: Fix local irq disable when PMIs are disabled
powerpc/kvm: Fix unannotated intra-function call warning
powerpc/85xx: Fix unannotated intra-function call warning
Pull RTC fixes from Alexandre Belloni:
"Here are a few fixes for 6.2. The EFI one is the most important as it
allows some RTCs to actually work. The other two are warnings that are
worth fixing.
- efi: make WAKEUP services optional
- sunplus: fix format string warning"
* tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: sunplus: fix format string for printing resource
dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property
rtc: efi: Enable SET/GET WAKEUP services as optional
Pull Kbuild fixes from Masahiro Yamada:
- Fix two bugs (for building and for signing) when MODULE_SIG_KEY
contains a PKCS#11 URI
* tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI
certs: Fix build error when PKCS#11 URI contains semicolon
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Yet another fix for non-CPU accesses to the memory backing the
VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW behaviour
after the fix that went in ealier in the cycle"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Test read-only PT memory regions
KVM: selftests: aarch64: Fix check of dirty log PT write
KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs
KVM: selftests: aarch64: Relax userfaultfd read vs. write checks
KVM: arm64: Allow no running vcpu on saving vgic3 pending table
KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status
KVM: arm64: Add helper vgic_write_guest_lock()
Pull parisc architecture fixes from Helge Deller:
- Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit
kernel
- pdc_iodc_print() dropped chars for newline in strings
- Drop constants in favour of PRIV_USER
- use safer strscpy() function in pdc_stable driver
* tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case
parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c
parisc: Fix return code of pdc_iodc_print()
parisc: pdc_stable: use strscpy() to instead of strncpy()
Pull OpenRISC mailing list update from Stafford Horne:
"The old mailing list for OpenRISC died due to some infrastructure
issues and the people in charge decided not to keep it running. We
have migrated this and the users over to kernel.org infrastructure.
Sending this out now to avoid kernel developers getting lots of
bounced mails for using the old list"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: Update OpenRISC mailing list
KVM/arm64 fixes for 6.2, take #3
- Yet another fix for non-CPU accesses to the memory backing
the VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW
behaviour after the fix that went in ealier in the cycle
Pull block fixes from Jens Axboe:
"A bit bigger than I'd like at this point, but mostly a bunch of little
fixes. In detail:
- NVMe pull request via Christoph:
- Fix a missing queue put in nvmet_fc_ls_create_association
(Amit Engel)
- Clear queue pointers on tag_set initialization failure
(Maurizio Lombardi)
- Use workqueue dedicated to authentication (Shin'ichiro
Kawasaki)
- Fix for an overflow in ublk (Liu)
- Fix for leaking a queue reference in block cgroups (Ming)
- Fix for a use-after-free in BFQ (Yu)"
* tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux:
blk-cgroup: don't update io stat for root cgroup
nvme-auth: use workqueue dedicated to authentication
nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
block: Fix the blk_mq_destroy_queue() documentation
block: ublk: extending queue_size to fix overflow
block, bfq: fix uaf for bfqq in bic_set_bfqq()
Pull ceph fix from Ilya Dryomov:
"A safeguard to prevent the kernel client from further damaging the
filesystem after running into a case of an invalid snap trace.
The root cause of this metadata corruption is still being investigated
but it appears to be stemming from the MDS. As such, this is the best
we can do for now"
* tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-client:
ceph: blocklist the kclient when receiving corrupted snap trace
ceph: move mount state enum to super.h
Pull RISC-V fixes from Palmer Dabbelt:
- A build fix to avoid static branches in cpu_relax(), which greatly
inflates the jump tables and breaks at least
CONFIG_CC_OPTIMIZE_FOR_SIZE=y.
- A fix for a kernel panic when probing impossible instruction
positions.
- A fix to disable unwind tables, which are enabled by default for
GCC-13 and result in unhandled relocations in modules.
* tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: disable generation of unwind tables
riscv: kprobe: Fixup kernel panic when probing an illegal position
riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
Pull drm fixes from Dave Airlie:
"A few more fixes this week, a bit more spread out though.
We have a bunch of nouveau regression and stabilisation fixes, along
with usual amdgpu, and i915. Otherwise just some minor misc ones:
dma-fence:
- fix signaling bit for private fences
panel:
- boe-tv101wum-nl6 disable fix
nouveau:
- gm20b acr regression fix
- tu102 scrub status fix
- tu102 wait for firmware fix
i915:
- Fixes for potential use-after-free and double-free
- GuC locking and refcount fixes
- Display's reference clock value fix
amdgpu:
- GC11 fixes
- DCN 3.1.4 fixes
- NBIO 4.3 fix
- DCN 3.2 fixes
- Properly handle additional cases where DCN is not supported
- SMU13 fixes
vc4:
- fix CEC adapter names
ssd130x:
- fix display init regression"
* tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm: (23 commits)
drm/amd/display: Properly handle additional cases where DCN is not supported
drm/amdgpu: Enable vclk dclk node for gc11.0.3
drm/amd: Fix initialization for nbio 4.3.0
drm/amdgpu: enable HDP SD for gfx 11.0.3
drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11
drm/amd/display: Reset DMUB mailbox SW state after HW reset
drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2
drm/amd/display: Adjust downscaling limits for dcn314
drm/amd/display: Add missing brackets in calculation
drm/amdgpu: update wave data type to 3 for gfx11
drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable
drm/nouveau/acr/gm20b: regression fixes
drm/nouveau/fb/tu102-: fix register used to determine scrub status
drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED
drm/i915/adlp: Fix typo for reference clock
drm/i915: Fix potential bit_17 double-free
drm/i915: Fix up locking around dumping requests lists
drm/i915: Fix request ref counting during error capture & debugfs dump
drm/i915/guc: Fix locking when searching for a hung request
drm/i915: Avoid potential vm use-after-free
...
Pull misc fixes from Andrew Morton:
"25 hotfixes, mainly for MM. 13 are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()
Kconfig.debug: fix the help description in SCHED_DEBUG
mm/swapfile: add cond_resched() in get_swap_pages()
mm: use stack_depot_early_init for kmemleak
Squashfs: fix handling and sanity checking of xattr_ids count
sh: define RUNTIME_DISCARD_EXIT
highmem: round down the address passed to kunmap_flush_on_unmap()
migrate: hugetlb: check for hugetlb shared PMD in node migration
mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups
Revert "mm: kmemleak: alloc gray object for reserved region with direct map"
freevxfs: Kconfig: fix spelling
maple_tree: should get pivots boundary by type
.mailmap: update e-mail address for Eugen Hristev
mm, mremap: fix mremap() expanding for vma's with vm_ops->close()
squashfs: harden sanity check in squashfs_read_xattr_id_table
ia64: fix build error due to switch case label appearing next to declaration
mm: multi-gen LRU: fix crash during cgroup migration
Revert "mm: add nodes= arg to memory.reclaim"
zsmalloc: fix a race with deferred_handles storing
...
When iterating on a linked list, a result of memremap is dereferenced
without checking it for NULL.
This patch adds a check that falls back on allocating a new page in
case memremap doesn't succeed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 18df7577ad ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
[ardb: return -ENOMEM instead of breaking out of the loop]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Jonathan writes:
1st set of IIO new device support, features and cleanups for the 6.3 cycle
The usual mixed bag. So far this has been a quiet cycle for IIO.
New device support
* adi,ad8686
- Add support for the AD5337 DAC - ID and 8 bit channel support.
* maxim,max5522
- New driver for this 2 channel DAC.
* nxp,imx93-adc
- New driver for this SoC ADC which is a fresh IP that will probably
turn up in additional SoCs going forwards.
* st,magn
- Add support for magnetometer part of LSM303C which is very similar
to standalone LIS3MDL already supported.
* ti,ads7924
- New driver for this 4 channel, 12-bit I2C ADC.
* ti,lmp92064
- New driver for this 12 bit SPI ADC.
* ti,tmag5273
- New driver for this 3D Hall-Effect Sensor.
Features
* core
- Add a standard structure for the value pairs in IIO_VAL_INT_PLUS_MICRO
available attributes and similar.
* cirrus,ep93xx
- Add DT binding docs and convert driver to DT based probing.
- Enable testing building with CONFIG_COMPILE_TEST.
* st,stm32-dfsdm
- Enable ID register support for discovery of hardware capabilities on
some devices.
Cleanups and minor fixes
* core
- Drop the custom iio_sysfs_match_string_with_gaps().
The special ability of this function to skip gaps in an array
was never used by any upstream driver.
- Sort headers whilst touching this file.
* tools
- Fix memory leak in iio_utils.c
* various
- leftover i2c probe_new() conversions.
- scnprintf() -> sysfs_emit() cleanups.
- hand rolled devm enables -> devm_regulator[_bulk]_get_enable()
- typo fixes
- dt-binding cleanup (whitespace, excess quotes and similar)
* adi,ad7746
- Set variable without pointless conditional.
* fsl,mma9551
- Squash false positives about use of uninitialized variable where
garbage undergoes an endian conversion before being ignored.
* measspec,ms5611
- Switch to fully devm_ managed probe() and so drop explicit remove()
* qcom,spmi-adc
- Use dev_err_probe() to suppress deferred print.
* qcom,spmi-adc5
- Define a missing channel used for battery identification.
* qcom,spmi-iadc
- Document a compatible seen in wild.
* semtech,sx9360
- Fix units on semtech,resolution dt-binding.
* sensiron,scd30
- dev_err_probe() usage to simplify error paths a little.
* st,lsm6dsx
- Add missing mount matrix for the gyro IIO device.
* taos,tsl2563
- Respect firmware configured interrupt polarity if present.
- Use i2c_smbus_write_word_data() in a few cases not previously covered.
- Factor out duplicated interrupt configuration.
- Switch to GENMASK() / BIT() from hand coded equivalents.
- Tidy up unused definitions.
- Use dev_err_probe() as appropriate.
- Drop platform_data as no in kernel users and there are better ways to
do equivalent if any are added.
- Add local struct device variable to tidy up code.
- Avoid dance via i2c_client to get the drvdata.
- Tidy up headers ordering and Makefile ordering.
* ti,adc128s052
- Use new spi_get_device_match_data().
- Drop ACPI_PTR() protection.
- Sort headers whilst here.
- Use asm instead of incorrect include of asm-generic/unaligned.h
* vishay,vcn4000
- Interrupt support for vcnl4040 (lots of refactoring needed)
* xilinx,ams
- Use fwnode_device_is_compatible() instead of open coding it.
* tag 'iio-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (71 commits)
iio: adc: ad7291: Fix indentation error by adding extra spaces
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
dt-bindings: iio/proximity: semtech,sx9360: Fix 'semtech,resolution' type
iio: imu: fix spdx format
iio: adc: imx93: Fix spelling mistake "geting" -> "getting"
dt-bindings: iio: cleanup examples - indentation
dt-bindings: iio: use lowercase hex in examples
dt-bindings: iio: correct node names in examples
dt-bindings: iio: minor whitespace cleanups
dt-bindings: iio: drop unneeded quotes
dt-bindings: iio: adc: Add NXP IMX93 ADC
iio: adc: add imx93 adc support
dt-bindings: iio: adc: add Texas Instruments ADS7924
iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
iio: imu: st_lsm6dsx: fix naming of 'struct iio_info' in st_lsm6dsx_shub.c.
iio: light: vcnl4000: Add interrupt support for vcnl4040
iio: light: vcnl4000: Make irq handling more generic
iio: light: vcnl4000: Prepare for more generic setup
...
Manivannan writes:
MHI Host
========
- Fixed the module description
MHI Endpoint
============
- Powered down the MHI EP stack completely during MHI RESET instead of just
doing transfer abort as the MMIO register access will be prohibited
afterwards. EP stack will also be powered on again in case the RESET
happened due to SYS_ERR.
- Added a sanity check before processing the command ring to make sure that
the channel is supported by the controller.
- Added a check to make sure the xfer_cb is available for the channel
before trying to send the error status to the client drivers. This
helps in avoiding a potential null pointer dereference.
- Fixed the debug log of RESET command
- Modified the channel ring handler lock to protect the whole handler
instead of locking it partially. This helps in avoiding a race that may
happen if a channel STOP/RESET command is issued by the host parallely.
- Saved the MHI state locally during suspend and resume. Otherwise, the MHI
EP stack will not be aware of a channel that got disabled and may try to
access it later.
- Changed the MHI state_lock to mutex instead of spinlock. This helps in
avoiding the sleeping in atomic bug reported by Dan Carpenter and also
allows the lock to be held throughout the state change.
- Fixed the off by one error while doing the MHI channel check during
command ring processing.
MHI Generic
===========
- Updated the MHI toplevel Makefile to use Kconfig flags for building the
host and endpoint sub-directories conditionally.
* tag 'mhi-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: ep: Fix off by one in mhi_ep_process_cmd_ring()
bus: mhi: ep: Change state_lock to mutex
bus: mhi: ep: Save channel state locally during suspend and resume
bus: mhi: ep: Move chan->lock to the start of processing queued ch ring
bus: mhi: ep: Fix the debug message for MHI_PKT_TYPE_RESET_CHAN_CMD cmd
bus: mhi: ep: Only send -ENOTCONN status if client driver is available
bus: mhi: ep: Check if the channel is supported by the controller
bus: mhi: ep: Power up/down MHI stack during MHI RESET
bus: mhi: host: Update mhi driver description
bus: mhi: Update Makefile to used Kconfig flags
Pull libata fix from Damien Le Moal:
"Fix device probe issues with some combination of adapters & devices
that do not report a current link speed, leading to device probe
failures if a link speed was not previously reported and saved (me)"
* tag 'ata-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata: Fix sata_down_spd_limit() when no link speed is reported
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers"
* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
...
Pull KUnit fixes from Shuah Khan:
"Three fixes to bugs that cause kernel crash, link error during build,
and a third to fix kunit_test_init_section_suites() extra indirection
issue"
* tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix kunit_test_init_section_suites(...)
kunit: fix bug in KUNIT_EXPECT_MEMEQ
kunit: Export kunit_running()
Pull ARM SoC fixes from Arnd Bergmann:
"The majority of bugfixes is once more for the NXP i.MX platform,
addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
imx8dxl power button and the USB modem on an imx7 board.
The reason that i.MX always shows up here is obviously not that they
are more buggy than the others, but they have the most boards and are
good about getting fixes in quickly.
The other DT fixes are for the Nuvoton wpcm450 flash controller and
the i2c mux on an ASpeed board.
Lastly, there are updates to the MAINTAINERS entries for Mediatek,
AMD/Seattle and NXP SoCs, as well as a lone code fix for error
handling in the allwinner 'rsb' bus driver"
* tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
MAINTAINERS: Update entry for MediaTek SoC support
MAINTAINERS: amd: drop inactive Brijesh Singh
ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
arm64: dts: imx8mm-verdin: Do not power down eth-phy
MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
ARM: dts: aspeed: Fix pca9849 compatible
arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
Pull s390 fixes from Heiko Carstens:
- With CONFIG_VMAP_STACK enabled it is not possible to load the s390
specific diag288_wdt watchdog module. The reason is that a pointer to
a string is passed to an inline assembly; this string however is
located on the stack, while the instruction within the inline
assembly expects a physicial address. Fix this by copying the string
to a kmalloc'ed buffer.
- The diag288_wdt watchdog module does not indicate that it accesses
memory from an inline assembly, which it does. Add "memory" to the
clobber list to prevent the compiler from optimizing code incorrectly
away.
- Pass size of the uncompressed kernel image to __decompress() call.
Otherwise the kernel image decompressor may corrupt/overwrite an
initrd. This was reported to happen on s390 after commit 2aa14b1ab2
("zstd: import usptream v1.5.2").
* tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/decompressor: specify __decompress() buf len to avoid overflow
watchdog: diag288_wdt: fix __diag288() inline assembly
watchdog: diag288_wdt: do not use stack buffers for hardware data
Pull x86 platform driver fixes from Hans de Goede:
"A set of AMD PMF fixes + a few other small fixes"
* tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI match
platform/x86: thinkpad_acpi: Fix thinklight LED brightness returning 255
platform/x86/amd: pmc: add CONFIG_SERIO dependency
platform/x86/amd/pmf: Ensure mutexes are initialized before use
platform/x86/amd/pmf: Fix to update SPS thermals when power supply change
platform/x86/amd/pmf: Fix to update SPS default pprof thermals
platform/x86/amd/pmf: update to auto-mode limits only after AMT event
platform/x86/amd/pmf: Add helper routine to check pprof is balanced
platform/x86/amd/pmf: Add helper routine to update SPS thermals
Bjørn Mork says:
====================
Fix mtk_eth_soc sgmii configuration.
This has been tested on a MT7986 with a Maxlinear GPY211C phy
permanently attached to the second SoC mac.
====================
Link: https://lore.kernel.org/r/20230201182331.943411-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently there is no IRQ handling (even the SGMII supports it).
Enable polling to support SFP ports.
Fixes: 14a44ab033 ("net: mtk_eth_soc: partially convert to phylink_pcs")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[ bmork: changed "1" => "true" ]
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The logic of the duplex bit is inverted. Setting it means half
duplex, not full duplex.
Fix and rename macro to avoid confusion.
Fixes: 7e53837269 ("net: ethernet: mediatek: Re-add support SGMII")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code expect the PHY to be in power down which is only true after reset.
Allow changes of the SGMII parameters more than once.
Only power down when reconfiguring to avoid bouncing the link when there's
no reason to - based on code from Russell King.
There are cases when the SGMII_PHYA_PWD register contains 0x9 which
prevents SGMII from working. The SGMII still shows link but no traffic
can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
taken from a good working state of the SGMII interface.
Fixes: 42c03844e9 ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[ bmork: rebased and squashed into one patch ]
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
can 2023-02-02
The first patch is by Ziyang Xuan and removes a errant WARN_ON_ONCE()
in the CAN J1939 protocol.
The next 3 patches are by Oliver Hartkopp. The first 2 target the CAN
ISO-TP protocol and fix the state machine with respect to signals and
a regression found by the syzbot.
The last patch is by me an missing assignment during the ethtool ring
configuration callback.
* tag 'linux-can-fixes-for-6.2-20230202' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
====================
Link: https://lore.kernel.org/r/20230202094135.2293939-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
MAINTAINERS: spring refresh of networking maintainers
Use Jon Corbet's script for generating statistics about maintainer
coverage to identify inactive maintainers of relatively active code.
Move them to CREDITS.
====================
Link: https://lore.kernel.org/r/20230201182014.2362044-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
