Several stmmac sub-drivers which support RGMII follow the same pattern.
They calculate the transmit clock rate, and then call clk_set_rate().
Analysis of several implementation documents suggests that the platform
is responsible for providing the transmit clock to the DWMAC core's
clk_tx_i. The expected rates are:
10Mbps 100Mbps 1Gbps
MII 2.5MHz 25MHz
RMII 2.5MHz 25MHz
GMII 125MHz
RGMI 2.5MHz 25MHz 125MHz
It seems some platforms require this clock to be manually configured,
but there are outputs from the MAC core that indicate the speed, so a
platform may use these to automatically configure the clock. Thus, we
can't just provide one solution to configure this clock rate.
Moreover, the clock may need to be derived from one of several sources
depending on the interface mode.
Provide a platform hook that is passed the transmit clock, interface
mode and speed.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0F-0052sS-Lr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5: Trust lockdown health syndrome
This series introduces a new error type in the health syndrome,
specifically for trust lock-down. Additionally, it exposes the CRR bit
in the health buffer, which, when set, indicates that the error cannot
be recovered without a process involving a cold reset. We add The CRR
bit value to the health buffer info log and update it to be logged on
any syndrome.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose crr bit in struct health buffer. When set, it indicates that
the error cannot be recovered without flow involving a cold reset.
Add its value to the health buffer info log.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently health buffer data is logged either when FW fatal error
detected or miss counter reached max misses threshold.
Log health buffer whenever new health syndrome is detected.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case health counter has not increased for few polling intervals, miss
counter will reach max misses threshold and health report will be
triggered for FW health reporter. In case syndrome found on same health
poll another health report will be triggered.
Avoid two health reports on same syndrome by marking this syndrome as
already known.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GRO tests are timing dependent and can easily flake. This is partially
mitigated in gro.sh by giving each subtest 3 chances to pass. However,
this still flakes on some machines. Reduce the flakiness by:
- Bumping retries to 6.
- Setting napi_defer_hard_irqs to 1 to reduce the chance that GRO is
flushed prematurely. This also lets us reduce the gro_flush_timeout
from 1ms to 100us.
Tested: Ran `gro.sh -t large` 1000 times. There were no failures with
this change. Ran inside strace to increase flakiness.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-4-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman says:
====================
Add missing netlink error message macros to coccinelle test
The newline_in_nl_msg.cocci test is missing some variants in the list of
checked macros, add them and fix all reported issues.
====================
Link: https://patch.msgid.link/20250226093904.6632-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, in case of Cilium, we run into users on Azure who require to use
tunneling for east/west traffic due to hitting IPAM API limits for Kubernetes
Pods if they would have gone with publicly routable IPs for Pods. In case
of tunneling, Cilium supports the option of vxlan or geneve. In order to
RSS spread flows among remote CPUs both derive a source port hash via
udp_flow_src_port() which takes the inner packet's skb->hash into account.
For clusters with many nodes, this can then hit a new limitation [0]: Today,
the Azure networking stack supports 1M total flows (500k inbound and 500k
outbound) for a VM. [...] Once this limit is hit, other connections are
dropped. [...] Each flow is distinguished by a 5-tuple (protocol, local IP
address, remote IP address, local port, and remote port) information. [...]
For vxlan and geneve, this can create a massive amount of UDP flows which
then run into the limits if stale flows are not evicted fast enough. One
option to mitigate this for vxlan is to narrow the source port range via
IFLA_VXLAN_PORT_RANGE while still being able to benefit from RSS. However,
geneve currently does not have this option and it spreads traffic across
the full source port range of [1, USHRT_MAX]. To overcome this limitation
also for geneve, add an equivalent IFLA_GENEVE_PORT_RANGE setting for users.
Note that struct geneve_config before/after still remains at 2 cachelines
on x86-64. The low/high members of struct ifla_geneve_port_range (which is
uapi exposed) are of type __be16. While they would be perfectly fine to be
of __u16 type, the consensus was that it would be good to be consistent
with the existing struct ifla_vxlan_port_range from a uapi consumer PoV.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://learn.microsoft.com/en-us/azure/virtual-network/virtual-machine-network-throughput [0]
Link: https://patch.msgid.link/20250226182030.89440-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in this particular case, we create a new `struct mlx5e_umr_wqe_hdr`
to enclose the header part of flexible structure `struct mlx5e_umr_wqe`.
This is, all the members except the flexible arrays `inline_mtts`,
`inline_klms` and `inline_ksms` in the anonymous union. We then replace
the header part with `struct mlx5e_umr_wqe_hdr hdr;` in `struct
mlx5e_umr_wqe`, and change the type of the object currently causing
trouble `umr_wqe` from `struct mlx5e_umr_wqe` to `struct
mlx5e_umr_wqe_hdr` --this last bit gets rid of the flex-array-in-the-middle
part and avoid the warnings.
Also, no new members should be added to `struct mlx5e_umr_wqe`, instead
any new members must be included in the header structure `struct
mlx5e_umr_wqe_hdr`. To enforce this, we use `static_assert()`, ensuring
that the memory layout of both the flexible structure and the newly
created header struct remain consistent.
The next step is to refactor the rest of the related code accordingly,
which means adding a bunch of `hdr.` wherever needed.
Lastly, we use `container_of()` whenever we need to retrieve a pointer
to the flexible structure `struct mlx5e_umr_wqe`.
So, with these changes, fix 125 of the following warnings:
drivers/net/ethernet/mellanox/mlx5/core/en.h:664:48: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://patch.msgid.link/Z76HzPW1dFTLOSSy@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gcc warns about unused const variables even in header files when
building with W=1:
In file included from include/linux/qed/qed_rdma_if.h:14,
from drivers/net/ethernet/qlogic/qed/qed_rdma.h:16,
from drivers/net/ethernet/qlogic/qed/qed_cxt.c:23:
include/linux/qed/qed_ll2_if.h:270:33: error: 'qed_ll2_ops_pass' defined but not used [-Werror=unused-const-variable=]
270 | static const struct qed_ll2_ops qed_ll2_ops_pass = {
This one is intentional, so mark it as __maybe_unused to it can be
included from a file that doesn't use this variable.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20250225200926.4057723-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
IEP driver supports both perout and pps signal generation
but perout feature is faulty with half-cooked support
due to some missing configuration. Remove perout
support from the driver and reject perout requests with
"not supported" error code.
Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250227092441.1848419-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf2704242 ("net: selftest: add test for netdev netlink queue-get API")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mtk_foe_entry_set_vlan() in mtk_ppe.c already supports double vlan
tagging, but mtk_flow_offload_replace() in mtk_ppe_offload.c only allows
for 1 vlan tag, optionally in combination with pppoe and dsa tags.
However, mtk_foe_entry_set_vlan() only allows for setting the vlan id.
The protocol cannot be set, it is always ETH_P_8021Q, for inner and outer
tag. This patch adds QinQ support to mtk_flow_offload_replace(), only in
the case that both inner and outer tags are ETH_P_8021Q.
Only PPPoE-in-Q (as before) and Q-in-Q are allowed. A combination
of PPPoE and Q-in-Q is not allowed.
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20250225201509.20843-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alexander Lobakin says:
====================
bpf: cpumap: enable GRO for XDP_PASS frames
Several months ago, I had been looking through my old XDP hints tree[0]
to check whether some patches not directly related to hints can be sent
standalone. Roughly at the same time, Daniel appeared and asked[1] about
GRO for cpumap from that tree.
Currently, cpumap uses its own kthread which processes cpumap-redirected
frames by batches of 8, without any weighting (but with rescheduling
points). The resulting skbs get passed to the stack via
netif_receive_skb_list(), which means no GRO happens.
Even though we can't currently pass checksum status from the drivers,
in many cases GRO performs better than the listified Rx without the
aggregation, confirmed by tests.
In order to enable GRO in cpumap, we need to do the following:
* patches 1-2: decouple the GRO struct from the NAPI struct and allow
using it out of a NAPI entity within the kernel core code;
* patch 3: switch cpumap from netif_receive_skb_list() to
gro_receive_skb().
Additional improvements:
* patch 4: optimize XDP_PASS in cpumap by using arrays instead of linked
lists;
* patch 5-6: introduce and use function do get skbs from the NAPI percpu
caches by bulks, not one at a time;
* patch 7-8: use that function in veth as well and remove the one that
was now superseded by it.
My trafficgen UDP GRO tests, small frame sizes:
GRO off GRO on
baseline 2.7 N/A Mpps
patch 3 2.3 4 Mpps
patch 8 2.4 4.7 Mpps
1...3 diff -17 +48 %
1...8 diff -11 +74 %
Daniel reported from +14%[2] to +18%[3] of throughput in neper's TCP RR
tests. On my system however, the same test gave me up to +100%.
Note that there's a series from Lorenzo[4] which achieves the same, but
in a different way. During the discussions, the approach using a
standalone GRO instance was preferred over the threaded NAPI.
[0] https://github.com/alobakin/linux/tree/xdp_hints
[1] https://lore.kernel.org/bpf/cadda351-6e93-4568-ba26-21a760bf9a57@app.fastmail.com
[2] https://lore.kernel.org/bpf/merfatcdvwpx2lj4j2pahhwp4vihstpidws3jwljwazhh76xkd@t5vsh4gvk4mh
[3] https://lore.kernel.org/bpf/yzda66wro5twmzpmjoxvy4si5zvkehlmgtpi6brheek3sj73tj@o7kd6nurr3o6
[4] https://lore.kernel.org/bpf/20241130-cpumap-gro-v1-0-c1180b1b5758@kernel.org
====================
Link: https://patch.msgid.link/20250225171751.2268401-1-aleksander.lobakin@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The only user was veth, which now uses napi_skb_cache_get_bulk().
It's now preferred over a direct allocation and is exported as
well, so remove this one.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we can bulk-allocate skbs from the NAPI cache, use that
function to do that in veth as well instead of direct allocation from
the kmem caches. veth uses NAPI and GRO, so this is both context-safe
and beneficial.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that cpumap uses GRO, which drops unused skb heads to the NAPI
cache, use napi_skb_cache_get_bulk() to try to reuse cached entries
and lower MM layer pressure. Always disable the BH before checking and
running the cpumap-pinned XDP prog and don't re-enable it in between
that and allocating an skb bulk, as we can access the NAPI caches only
from the BH context.
The better GRO aggregates packets, the less new skbs will be allocated.
If an aggregated skb contains 16 frags, this means 15 skbs were returned
to the cache, so next 15 skbs will be built without allocating anything.
The same trafficgen UDP GRO test now shows:
GRO off GRO on
threaded GRO 2.3 4 Mpps
thr bulk GRO 2.4 4.7 Mpps
diff +4 +17 %
Comparing to the baseline cpumap:
baseline 2.7 N/A Mpps
thr bulk GRO 2.4 4.7 Mpps
diff -11 +74 %
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a function to get an array of skbs from the NAPI percpu cache.
It's supposed to be a drop-in replacement for
kmem_cache_alloc_bulk(skbuff_head_cache, GFP_ATOMIC) and
xdp_alloc_skb_bulk(GFP_ATOMIC). The difference (apart from the
requirement to call it only from the BH) is that it tries to use
as many NAPI cache entries for skbs as possible, and allocate new
ones only if needed.
The logic is as follows:
* there is enough skbs in the cache: decache them and return to the
caller;
* not enough: try refilling the cache first. If there is now enough
skbs, return;
* still not enough: try allocating skbs directly to the output array
with %GFP_ZERO, maybe we'll be able to get some. If there's now
enough, return;
* still not enough: return as many as we were able to obtain.
Most of times, if called from the NAPI polling loop, the first one will
be true, sometimes (rarely) the second one. The third and the fourth --
only under heavy memory pressure.
It can save significant amounts of CPU cycles if there are GRO cycles
and/or Tx completion cycles (anything that descends to
napi_skb_cache_put()) happening on this CPU.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
cpumap still uses linked lists to store a list of skbs to pass to the
stack. Now that we don't use listified Rx in favor of
napi_gro_receive(), linked list is now an unneeded overhead.
Inside the polling loop, we already have an array of skbs. Let's reuse
it for skbs passed to cpumap (generic XDP) and keep there in case of
XDP_PASS when a program is installed to the map itself. Don't list
regular xdp_frames after converting them to skbs as well; store them
in the mentioned array (but *before* generic skbs as the latters have
lower priority) and call gro_receive_skb() for each array element after
they're done.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
cpumap has its own BH context based on kthread. It has a sane batch
size of 8 frames per one cycle.
GRO can be used here on its own. Adjust cpumap calls to the upper stack
to use GRO API instead of netif_receive_skb_list() which processes skbs
by batches, but doesn't involve GRO layer at all.
In plenty of tests, GRO performs better than listed receiving even
given that it has to calculate full frame checksums on the CPU.
As GRO passes the skbs to the upper stack in the batches of
@gro_normal_batch, i.e. 8 by default, and skb->dev points to the
device where the frame comes from, it is enough to disable GRO
netdev feature on it to completely restore the original behaviour:
untouched frames will be being bulked and passed to the upper stack
by 8, as it was with netif_receive_skb_list().
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make GRO init and cleanup functions global to be able to use GRO
without a NAPI instance. Taking into account already global gro_flush(),
it's now fully usable standalone.
New functions are not exported, since they're not supposed to be used
outside of the kernel core code.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In fact, these two are not tied closely to each other. The only
requirements to GRO are to use it in the BH context and have some
sane limits on the packet batches, e.g. NAPI has a limit of its
budget (64/8/etc.).
Move purely GRO fields into a new structure, &gro_node. Embed it
into &napi_struct and adjust all the references.
gro_node::cached_napi_id is effectively the same as
napi_struct::napi_id, but to be used on GRO hotpath to mark skbs.
napi_struct::napi_id is now a fully control path field.
Three Ethernet drivers use napi_gro_flush() not really meant to be
exported, so move it to <net/gro.h> and add that include there.
napi_gro_receive() is used in more than 100 drivers, keep it
in <linux/netdevice.h>.
This does not make GRO ready to use outside of the NAPI context
yet.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Building with W=1 shows a warning about xge_acpi_match being unused when
CONFIG_ACPI is disabled:
drivers/net/ethernet/apm/xgene-v2/main.c:723:36: error: unused variable 'xge_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225163341.4168238-2-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Building with W=1 shows a warning about hns_mdio_acpi_match being unused when
CONFIG_ACPI is disabled:
drivers/net/ethernet/hisilicon/hns_mdio.c:631:36: error: unused variable 'hns_mdio_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225163341.4168238-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When extra warnings are enable, there are configurations that build
pktgen without CONFIG_XFRM, which leaves a static const variable unused:
net/core/pktgen.c:213:1: error: unused variable 'F_IPSEC' [-Werror,-Wunused-const-variable]
213 | PKT_FLAGS
| ^~~~~~~~~
net/core/pktgen.c:197:2: note: expanded from macro 'PKT_FLAGS'
197 | pf(IPSEC) /* ipsec on for flows */ \
| ^~~~~~~~~
This could be marked as __maybe_unused, or by making the one use visible
to the compiler by slightly rearranging the #ifdef blocks. The second
variant looks slightly nicer here, so use that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Link: https://patch.msgid.link/20250225085722.469868-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests to check that the napi retained the IRQ after down/up,
multiple changes in the number of rx queues and after
attaching/releasing XDP program.
Tested on ice and idpf:
# NETIF=<iface> tools/testing/selftests/drivers/net/hw/irq.py
KTAP version 1
1..4
ok 1 irq.check_irqs_reported
ok 2 irq.check_reconfig_queues
ok 3 irq.check_reconfig_xdp
ok 4 irq.check_down
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Tested-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-7-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
