Livepatching a loaded module involves applying relocations through
apply_relocate_add(), which attempts to write to read-only memory when
CONFIG_STRICT_MODULE_RWX=y.
R_PPC_ADDR16_LO, R_PPC_ADDR16_HI, R_PPC_ADDR16_HA and R_PPC_REL24 are
the types generated by the kpatch-build userspace tool or klp-convert
kernel tree observed applying a relocation to a post-init module.
Use patch_instruction() to patch those relocations.
Commit 8734b41b3e ("powerpc/module_64: Fix livepatching for
RO modules") did similar change in module_64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5697157cb7dba3927e19aa17c915a83bc550bb2.1640017960.git.christophe.leroy@csgroup.eu
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
Trace IMC (In-Memory collection counters) in powerpc is useful for
application level profiling.
For trace_imc, presently task context (task_ctx_nr) is set to
perf_hw_context. But perf_hw_context should only be used for CPU PMU.
See commit 2665784850 ("perf/core: Verify we have a single
perf_hw_context PMU").
So for trace_imc, even though it is per thread PMU, it is preferred to
use sw_context in order to be able to do application level monitoring.
Hence change the task_ctx_nr to use perf_sw_context.
Fixes: 012ae24484 ("powerpc/perf: Trace imc PMU functions")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Update subject & incorporate notes into change log, reflow comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202041837.65968-1-atrajeev@linux.vnet.ibm.com
Without this patch, module init sections are disabled by patching their
names in arch-specific code when they're loaded (which prevents code in
layout_sections from finding init sections). This patch uses the new
arch-specific module_init_section instead.
This allows modules that have .init_array sections to have the
initialisers properly called (on load, before init). Without this patch,
the initialisers are not called because .init_array is renamed to
_init_array, and thus isn't found by code in find_module_sections().
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202055123.2144842-1-wedsonaf@google.com
Other uses of &gang->aff_list_head, eg in spufs_assert_affinity, indicate
that the list elements have type spu_context, not spu as used here. Change
the type of tmp accordingly.
This has no impact on the execution, because tmp is not used in the body of
the loop.
Fixes: c5fc8d2a92 ("[CELL] cell: add placement computation for scheduling of affinity contexts")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1588929176-28527-1-git-send-email-Julia.Lawall@inria.fr
When figuring out the number of threads, the debug message prints "1
thread" for the first iteration of the loop, instead of the actual
number of threads calculated from the length of the
"ibm,ppc-interrupt-server#s" property.
* /cpus/PowerPC,POWER8@20...
ibm,ppc-interrupt-server#s -> 1 threads <--- WRONG
thread 0 -> cpu 0 (hard id 32)
thread 1 -> cpu 1 (hard id 33)
thread 2 -> cpu 2 (hard id 34)
thread 3 -> cpu 3 (hard id 35)
thread 4 -> cpu 4 (hard id 36)
thread 5 -> cpu 5 (hard id 37)
thread 6 -> cpu 6 (hard id 38)
thread 7 -> cpu 7 (hard id 39)
* /cpus/PowerPC,POWER8@28...
ibm,ppc-interrupt-server#s -> 8 threads
thread 0 -> cpu 8 (hard id 40)
thread 1 -> cpu 9 (hard id 41)
thread 2 -> cpu 10 (hard id 42)
thread 3 -> cpu 11 (hard id 43)
thread 4 -> cpu 12 (hard id 44)
thread 5 -> cpu 13 (hard id 45)
thread 6 -> cpu 14 (hard id 46)
thread 7 -> cpu 15 (hard id 47)
(...)
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210120181847.952106-1-farosas@linux.ibm.com
As reported by sparse:
arch/powerpc/mm/ptdump/hashpagetable.c:264:29: warning: restricted __be64 degrades to integer
arch/powerpc/mm/ptdump/hashpagetable.c:265:49: warning: restricted __be64 degrades to integer
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: warning: incorrect type in assignment (different base types)
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: expected unsigned long long [usertype]
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: got restricted __be64 [usertype] v
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: warning: incorrect type in assignment (different base types)
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: expected unsigned long long [usertype]
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: got restricted __be64 [usertype] r
The values returned by plpar_pte_read_4() are CPU endian, not __be64, so
assigning them to struct hash_pte confuses sparse. As a minimal fix open
code a struct to hold the values with CPU endian types.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202053039.691917-1-mpe@ellerman.id.au
Mahesh & Sourabh identified two problems[1][2] with ppc64_bolted_size()
and paca allocation.
The first is that on a Radix capable machine but with "disable_radix" on
the command line, there is a window during early boot where
early_radix_enabled() is true, even though it will later become false.
early_init_devtree: <- early_radix_enabled() = false
early_init_dt_scan_cpus: <- early_radix_enabled() = false
...
check_cpu_pa_features: <- early_radix_enabled() = false
... ^ <- early_radix_enabled() = TRUE
allocate_paca: | <- early_radix_enabled() = TRUE
... |
ppc64_bolted_size: | <- early_radix_enabled() = TRUE
if (early_radix_enabled())| <- early_radix_enabled() = TRUE
return ULONG_MAX; |
... |
... | <- early_radix_enabled() = TRUE
... | <- early_radix_enabled() = TRUE
mmu_early_init_devtree() V
... <- early_radix_enabled() = false
This causes ppc64_bolted_size() to return ULONG_MAX for the boot CPU's
paca allocation, even though later it will return a different value.
This is not currently a bug because the paca allocation is also limited
by the RMA size, but that is very fragile.
The second issue is that when using the Hash MMU, when we call
ppc64_bolted_size() for the boot CPU's paca allocation, we have not yet
detected whether 1T segments are available. That causes
ppc64_bolted_size() to return 256MB, even if the machine can actually
support up to 1T. This is usually OK, we generally have space below
256MB for one paca, but for a kdump kernel placed above 256MB it causes
the boot to fail.
At boot we cannot discover all the features of the machine
instantaneously, so there will always be some periods where we have
incomplete knowledge of the system. However both the above problems stem
from the fact that we allocate the boot CPU's paca (and paca pointers
array) before we decide which MMU we are using, or discover its exact
features.
Moving the paca allocation slightly later still can solve both the
issues described above, and means for a normal boot we don't do any
permanent allocations until after we've discovered the MMU.
Note that although we move the boot CPU's paca allocation later, we
still have a temporary paca (boot_paca) accessible via r13, so code that
does read only access to paca fields is safe. The only risk is that some
code writes to the boot_paca, and that write will then be lost when we
switch away from the boot_paca later in early_setup().
The additional code that runs before the paca allocation is primarily
mmu_early_init_devtree(), which is scanning the device tree and
populating globals and cur_cpu_spec with MMU related flags. I do not see
any additional code that writes to paca fields.
[1]: https://lore.kernel.org/r/20211018084434.217772-2-sourabhjain@linux.ibm.com
[2]: https://lore.kernel.org/r/20211018084434.217772-3-sourabhjain@linux.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124130544.408675-1-mpe@ellerman.id.au
On board rev A, the network interface labels for the switch ports
written on the front panel are different than on rev B and later.
This patch fixes network interface names for the switch ports according
to labels that are written on the front panel of the board rev B.
They start from ETH3 and end at ETH10.
This patch also introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.
Fixes: e69eb0824d ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121091447.3412907-1-bigunclemax@gmail.com
The LPAR name may be changed after the LPAR has been started in the HMC.
In that case lparstat command is not reporting the updated value because
it reads it from the device tree which is read at boot time.
However this value could be read from RTAS.
Adding this value in the /proc/powerpc/lparcfg output allows to read the
updated value.
However the hypervisor, like Qemu/KVM, may not support this RTAS
parameter. In that case the value reported in lparcfg is read from the
device tree and so is not updated accordingly.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop doc-comment syntax, change RTAS/DT to lower case, use of_root
to fix missing of_node_put(), use of_property_read_string()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220106161339.74656-1-ldufour@linux.ibm.com
Pull irq fixes from Borislav Petkov:
- Drop an unused private data field in the AIC driver
- Various fixes to the realtek-rtl driver
- Make the GICv3 ITS driver compile again in !SMP configurations
- Force reset of the GICv3 ITSs at probe time to avoid issues during kexec
- Yet another kfree/bitmap_free conversion
- Various DT updates (Renesas, SiFive)
* tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples
dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts
dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support
irqchip/gic-v3-its: Reset each ITS's BASERn register before probe
irqchip/gic-v3-its: Fix build for !SMP
irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap
irqchip/realtek-rtl: Service all pending interrupts
irqchip/realtek-rtl: Fix off-by-one in routing
irqchip/realtek-rtl: Map control data to virq
irqchip/apple-aic: Drop unused ipi_hwirq field
Pull perf fixes from Borislav Petkov:
- Prevent accesses to the per-CPU cgroup context list from another CPU
except the one it belongs to, to avoid list corruption
- Make sure parent events are always woken up to avoid indefinite hangs
in the traced workload
* tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix cgroup event list management
perf: Always wake the parent event
Pull scheduler fix from Borislav Petkov:
"Make sure the membarrier-rseq fence commands are part of the reported
set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY"
* tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask
Pull x86 fixes from Borislav Petkov:
- Add another Intel CPU model to the list of CPUs supporting the
processor inventory unique number
- Allow writing to MCE thresholding sysfs files again - a previous
change had accidentally disabled it and no one noticed. Goes to show
how much is this stuff used
* tag 'x86_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPIN
x86/MCE/AMD: Allow thresholding interface updates after init
Merge misc fixes from Andrew Morton:
"12 patches.
Subsystems affected by this patch series: sysctl, binfmt, ia64, mm
(memory-failure, folios, kasan, and psi), selftests, and ocfs2"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
ocfs2: fix a deadlock when commit trans
jbd2: export jbd2_journal_[grab|put]_journal_head
psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n
psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n
mm, kasan: use compare-exchange operation to set KASAN page tag
kasan: test: fix compatibility with FORTIFY_SOURCE
tools/testing/scatterlist: add missing defines
mm: page->mapping folio->mapping should have the same offset
memory-failure: fetch compound_head after pgmap_pfn_valid()
ia64: make IA64_MCA_RECOVERY bool instead of tristate
binfmt_misc: fix crash when load/unload module
include/linux/sysctl.h: fix register_sysctl_mount_point() return type
When CONFIG_PROC_FS is disabled psi code generates the following
warnings:
kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=]
1364 | static const struct proc_ops psi_cpu_proc_ops = {
| ^~~~~~~~~~~~~~~~
kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=]
1355 | static const struct proc_ops psi_memory_proc_ops = {
| ^~~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=]
1346 | static const struct proc_ops psi_io_proc_ops = {
| ^~~~~~~~~~~~~~~
Make definitions of these structures and related functions conditional
on CONFIG_PROC_FS config.
Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com
Fixes: 0e94682b73 ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_CGROUPS is disabled psi code generates the following
warnings:
kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes]
1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group,
| ^~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes]
1182 | void psi_trigger_destroy(struct psi_trigger *t)
| ^~~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes]
1249 | __poll_t psi_trigger_poll(void **trigger_ptr,
| ^~~~~~~~~~~~~~~~
Change the declarations of these functions in the header to provide the
prototypes even when they are unused.
Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com
Fixes: 0e94682b73 ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform
dynamic checks using __builtin_object_size(ptr), which when failed will
panic the kernel.
Because the KASAN test deliberately performs out-of-bounds operations,
the kernel panics with FORTIFY_SOURCE, for example:
| kernel BUG at lib/string_helpers.c:910!
| invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
| CPU: 1 PID: 137 Comm: kunit_try_catch Tainted: G B 5.16.0-rc3+ #3
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
| RIP: 0010:fortify_panic+0x19/0x1b
| ...
| Call Trace:
| kmalloc_oob_in_memset.cold+0x16/0x16
| ...
Fix it by also hiding `ptr` from the optimizer, which will ensure that
__builtin_object_size() does not return a valid size, preventing
fortified string functions from panicking.
Link: https://lkml.kernel.org/r/20220124160744.1244685-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Nico Pache <npache@redhat.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The cited commits replaced preemptible with pagefault_disabled and
flush_kernel_dcache_page with flush_dcache_page respectively, hence need
to update the corresponding defines in the test.
scatterlist.c: In function ‘sg_miter_stop’:
scatterlist.c:919:4: warning: implicit declaration of function ‘flush_dcache_page’ [-Wimplicit-function-declaration]
flush_dcache_page(miter->page);
^~~~~~~~~~~~~~~~~
In file included from linux/scatterlist.h:8:0,
from scatterlist.c:9:
scatterlist.c:922:18: warning: implicit declaration of function ‘pagefault_disabled’ [-Wimplicit-function-declaration]
WARN_ON_ONCE(!pagefault_disabled());
^
linux/mm.h:23:25: note: in definition of macro ‘WARN_ON_ONCE’
int __ret_warn_on = !!(condition); \
^~~~~~~~~
Link: https://lkml.kernel.org/r/20220118082105.1737320-1-maorg@nvidia.com
Fixes: 723aca2085 ("mm/scatterlist: replace the !preemptible warning in sg_miter_stop()")
Fixes: 0e84f5dbf8 ("scatterlist: replace flush_kernel_dcache_page with flush_dcache_page")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
