Pull more Renesas clk driver updates from Geert Uytterhoeven:
- Add USB clocks, resets and power domains on RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
RZ/V2H
- Miscellaneous fixes and improvements
* tag 'renesas-clk-for-v6.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
dt-bindings: clock: renesas,cpg-clocks: Add top-level constraints
Driver code is leaking OF node reference from of_get_parent() in
bcm53573_ilp_init(). Usage of of_get_parent() is not needed in the
first place, because the parent node will not be freed while we are
processing given node (triggered by CLK_OF_DECLARE()). Thus fix the
leak by accessing parent directly, instead of of_get_parent().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826065801.17081-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Huan Yang <link@vivo.com>
Link: https://lore.kernel.org/r/20240820102119.130298-1-link@vivo.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some clocks maybe default enabled by hardware. For clocks that don't
have users, that will be left in hardware default state, because prepare
count and enable count is zero,if there is no is_prepared hook to get
the hardware state. So add is_prepared hook to detect the hardware
state. Then when disabling the unused clocks, they can be simply
turned OFF to save power during kernel boot.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240806145601.1184337-1-peng.fan@oss.nxp.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The local u64 variable refdiv_val has the same value as the local u32
variable val and can be removed. Remove it and use val directly as the
divisor to also remove the following Coccinelle/coccicheck warning
reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead
Use the preferred div_u64() function instead of the do_div() macro.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240801103616.20430-1-thorsten.blum@toblux.com
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use of_property_present() to test for property presence rather than
of_(find|get)_property(). This is part of a larger effort to remove
callers of of_find_property() and similar functions.
of_(find|get)_property() leak the DT struct property and data pointers
which is a problem for dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-4-robh@kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # clk-mstp.c
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Replace of_get_property() with the type specific
of_property_count_u32_elems() to get the property length.
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731201407.1838385-7-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Currently, all PLLs but PLL2 are modelled as fixed divider clocks, based
on the state of the mode pins. However, the boot loader stack may have
changed the actual PLL configuration from the default, leading to
incorrect clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, PLL4,
and PLL6 as variable fractional PLLs.
Reformat nearby lines to retain a consistent layout.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/b98523ed08de7386944c5ae860eae107dc28be3e.1721648548.git.geert+renesas@glider.be
Currently, all PLLs are modelled as fixed divider clocks, based on the
state of the mode pins. However, the boot loader stack may have changed
the actual PLL configuration from the default, leading to incorrect
clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, and
PLL6 as variable fractional PLLs. Note that the R-Car Gen4 clock driver
does not support variable 9.24 PLLs yet, so the driver will downgrade
them to fixed fractional PLLs, too.
Reformat nearby lines to retain a consistent layout.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/8544571f507e00ed6fc61617d27c9e19de5e9d11.1721648548.git.geert+renesas@glider.be
The custom clock driver that models the PLL clocks on R-Car Gen4
supports only fractional 8.25 PLLs, as used on R-Car V4H/V4M.
R-Car S4-8 uses integer and fractional multiplication fields that are
one bit larger resp. smaller, and a slightly different formula.
Extend the existing support to fractional 9.24 PLL, and introduce new
clock types and helper macros to describe these PLLs.
Note that there is no use case for variable fractional 9.24 PLLs yet, as
the Cortex-A55 cores on R-Car S4-8 do not support High Performance mode.
Hence the PLL is always modeled as a fixed PLL, regardless of the
description,
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/5684eda1260435c8eceabc274e0b18cb280a6341.1721648548.git.geert+renesas@glider.be
R-Car Gen4 PLLs support fractional multiplication, which can improve
accuracy when configuring a specific frequency.
Add support for fractional multiplication to the custom clock driver
for PLLs, which is currently used only for PLL2 on R-Car V4H.
While at it, add the missing blank line after the function.
Note that Fractional Multiplication is not enabled by the driver,
but used only if the boot loaded enabled it before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/1a58ebef6f54460f49fb81ba9bbf288164de2646.1721648548.git.geert+renesas@glider.be
The custom clock driver that models the PLL clocks on R-Car Gen4 assumes
the integer and fractional[*] multiplication field sizes as used on
R-Car V4H and V4M, representing a fractional 8.25 number.
Rename the related definitions, functions, and structures to clarify
this, and to prepare for the advent of support for the different field
sizes on R-Car S4-8.
[*] The fractional part is not yet supported.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/2ce9f9c75bfb6312129d416672f9691bbd11c0e7.1721648548.git.geert+renesas@glider.be
