In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull mtd fixes from Miquel Raynal.
* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: stm32_fmc2: fix broken ECC
mtd: spi-nor: Fix address width on flash chips > 16MB
mtd: spi-nor: Don't copy self-pointing struct around
mtd: rawnand: ifc: Move the ECC engine initialization to the right place
mtd: rawnand: mxc: Move the ECC engine initialization to the right place
Pull spi fix from Mark Brown:
"This is an additional fix on top of 5e31ba0c05 ('spi: bcm2835: fix
gpio cs level inversion') - when sending my prior pull request I had
misremembred the status of that patch, apologies for the noise here"
* tag 'spi-fix-v5.10-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm2835: remove use of uninitialized gpio flags variable
Pull sound fixes from Takashi Iwai:
"Quite a bunch of small fixes that have been gathered since the last
pull, including changes like below:
- HD-audio runtime PM fixes and refactoring
- HD-audio and USB-audio quirks
- SOF warning fix
- Various ASoC device-specific fixes for Intel, Qualcomm, etc"
* tag 'sound-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
ALSA: usb-audio: Add implicit feedback quirk for Qu-16
ASoC: mchp-spdiftx: Do not set Validity bit(s)
ALSA: usb-audio: Add implicit feedback quirk for MODX
ALSA: usb-audio: add usb vendor id as DSD-capable for Khadas devices
ALSA: hda/realtek - Enable headphone for ASUS TM420
ALSA: hda: prevent undefined shift in snd_hdac_ext_bus_get_link()
ASoC: qcom: lpass-cpu: Fix clock disable failure
ASoC: qcom: lpass-sc7180: Fix MI2S bitwidth field bit positions
ASoC: codecs: wcd9335: Set digital gain range correctly
ASoC: codecs: wcd934x: Set digital gain range correctly
ALSA: hda: Reinstate runtime_allow() for all hda controllers
ALSA: hda: Separate runtime and system suspend
ALSA: hda: Refactor codec PM to use direct-complete optimization
ALSA: hda/realtek - Fixed HP headset Mic can't be detected
ALSA: usb-audio: Add implicit feedback quirk for Zoom UAC-2
ALSA: make snd_kcontrol_new name a normal string
ALSA: fix kernel-doc markups
ASoC: SOF: loader: handle all SOF_IPC_EXT types
ASoC: cs42l51: manage mclk shutdown delay
ASoC: qcom: sdm845: set driver name correctly
...
Pull drm fixes from Dave Airlie:
"It's Friday here so that means another installment of drm fixes to
distract you from the counting process.
Changes all over the place, the amdgpu changes contain support for a
new GPU that is close to current one already in the tree (Green
Sardine) so it shouldn't have much side effects.
Otherwise imx has a few cleanup patches and fixes, amdgpu and i915
have around the usual smattering of fixes, fonts got constified, and
vc4/panfrost has some minor fixes. All in all a fairly regular rc3.
We have an outstanding nouveau regression, but the author is looking
into the fix, so should be here next week.
I now return you to counting.
fonts:
- constify font structures.
MAINTAINERS:
- Fix path for amdgpu power management
amdgpu:
- Add support for more navi1x SKUs
- Fix for suspend on CI dGPUs
- VCN DPG fix for Picasso
- Sienna Cichlid fixes
- Polaris DPM fix
- Add support for Green Sardine
amdkfd:
- Fix an allocation failure check
i915:
- Fix set domain's cache coherency
- Fixes around breadcrumbs
- Fix encoder lookup during PSR atomic
- Hold onto an explicit ref to i915_vma_work.pinned
- gvt: HWSP reset handling fix
- gvt: flush workaround
- gvt: vGPU context pin/unpin
- gvt: mmio cmd access fix for bxt/apl
imx:
- drop unused functions and callbacks
- reuse imx_drm_encoder_parse_of
- spinlock rework
- memory leak fix
- minor cleanups
vc4:
- resource cleanup fix
panfrost:
- madvise/shrinker fix"
* tag 'drm-fixes-2020-11-06-1' of git://anongit.freedesktop.org/drm/drm: (55 commits)
drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINE
drm/amd/display: Add green_sardine support to DM
drm/amd/display: Add green_sardine support to DC
drm/amdgpu: enable vcn support for green_sardine (v2)
drm/amdgpu: enable green_sardine_asd.bin loading (v2)
drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)
drm/amdgpu: add gfx support for green_sardine (v2)
drm/amdgpu: add soc15 common ip block support for green_sardine (v3)
drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2)
drm/amdgpu: add Green_Sardine APU flag
drm/amdgpu: resolved ASD loading issue on sienna
amdkfd: Check kvmalloc return before memcpy
drm/amdgpu: update golden setting for sienna_cichlid
amd/amdgpu: Disable VCN DPG mode for Picasso
drm/amdgpu/swsmu: remove duplicate call to smu_set_default_dpm_table
drm/i915: Hold onto an explicit ref to i915_vma_work.pinned
drm/i915/gt: Flush xcs before tgl breadcrumbs
drm/i915/gt: Expose more parameters for emitting writes into the ring
drm/i915: Fix encoder lookup during PSR atomic check
drm/i915/gt: Use the local HWSP offset during submission
...
Pull tpm fixes from Jarkko Sakkinen:
"Two critical tpm driver bug fixes"
* tag 'tpmdd-next-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: efi: Don't create binary_bios_measurements file for an empty log
tpm_tis: Disable interrupts on ThinkPad T490s
Pull iommu fixes from Joerg Roedel:
- Fix a NULL-ptr dereference in the Intel VT-d driver
- Two fixes for Intel SVM support
- Increase IRQ remapping table size in the AMD IOMMU driver. The old
number of 128 turned out to be too low for some recent devices.
- Fix a mask check in generic IOMMU code
* tag 'iommu-fixes-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix a check in iommu_check_bind_data()
iommu/vt-d: Fix a bug for PDP check in prq_event_thread
iommu/vt-d: Fix sid not set issue in intel_svm_bind_gpasid()
iommu/vt-d: Fix kernel NULL pointer dereference in find_domain()
iommu/amd: Increase interrupt remapping table limit to 512 entries
Pull VFIO fixes from Alex Williamson:
- Remove code by using existing helper (Zenghui Yu)
- fsl-mc copy-user return and underflow fixes (Dan Carpenter)
- fsl-mc static function declaration (Diana Craciun)
- Fix ioeventfd sleeping under spinlock (Alex Williamson)
- Fix pm reference count leak in vfio-platform (Zhang Qilong)
- Allow opening IGD device w/o OpRegion support (Fred Gao)
* tag 'vfio-v5.10-rc3' of git://github.com/awilliam/linux-vfio:
vfio/pci: Bypass IGD init in case of -ENODEV
vfio: platform: fix reference leak in vfio_platform_open
vfio/pci: Implement ioeventfd thread handler for contended memory lock
vfio/fsl-mc: Make vfio_fsl_mc_irqs_allocate static
vfio/fsl-mc: prevent underflow in vfio_fsl_mc_mmap()
vfio/fsl-mc: return -EFAULT if copy_to_user() fails
vfio/type1: Use the new helper to find vfio_group
Pull arm64 fixes from Will Deacon:
"Here's the weekly batch of fixes for arm64. Not an awful lot here, but
there are still a few unresolved issues relating to CPU hotplug, RCU
and IRQ tracing that I hope to queue fixes for next week.
Summary:
- Fix early use of kprobes
- Fix kernel placement in kexec_file_load()
- Bump maximum number of NUMA nodes"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kexec_file: try more regions if loading segments fails
arm64: kprobes: Use BRK instead of single-step when executing instructions out-of-line
arm64: NUMA: Kconfig: Increase NODES_SHIFT to 4
Pull ARC fixes from Vineet Gupta:
- Unbork HSDKv1 platform (won't boot) due to memory map issue
- Prevent stack unwinder from infinite looping
* tag 'arc-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk] Remap CCMs super early in asm boot trampoline
ARC: stack unwinding: avoid indefinite looping
Pull s390 fixes from Heiko Carstens:
- fix reference counting for ap devices
- fix paes selftest
- fix pmd_deref()/pud_deref() so they can also handle large pages
- remove unused vdso file and defines
- update defconfigs
- call rcu_cpu_starting() early in smp init code to avoid lockdep
warnings
- fix hotplug of PCI function missing bus
* tag 's390-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix hot-plug of PCI function missing bus
s390/smp: move rcu_cpu_starting() earlier
s390/pkey: fix paes selftest failure with paes and pkey static build
s390: update defconfigs
s390/vdso: remove unused constants
s390/vdso: remove empty unused file
s390/mm: make pmd/pud_deref() large page aware
s390/ap: fix ap devices reference counting
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc3, including fixes from wireless, can, and
netfilter subtrees.
Current merge window - bugs in new features:
- can: isotp: isotp_rcv_cf(): enable RX timeout handling in
listen-only mode
Previous releases - regressions:
- mac80211:
- don't require VHT elements for HE on 2.4 GHz
- fix regression where EAPOL frames were sent in plaintext
- netfilter:
- ipset: Update byte and packet counters regardless of whether
they match
- ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
inner packet has IP_DF (don't fragment) set in its header (when
TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)
- net: fec: fix MDIO probing for some FEC hardware blocks
- ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
support
- sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
platforms, sparse-related fix used the wrong integer size
Previous releases - always broken:
- netfilter: use actual socket sk rather than skb sk when routing
harder
- r8169: work around short packet hw bug on RTL8125 by padding frames
- net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
advertisement, the hardware does not support it
- chelsio/chtls: fix always leaking ctrl_skb and another leak caused
by a race condition
- fix drivers incorrectly writing into skbs on TX:
- cadence: force nonlinear buffers to be cloned
- gianfar: Account for Tx PTP timestamp in the skb headroom
- gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP
- can: flexcan:
- remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
- add ECC initialization for VF610 and LX2160A
- flexcan_remove(): disable wakeup completely
- can: fix packet echo functionality:
- peak_canfd: fix echo management when loopback is on
- make sure skbs are not freed in IRQ context in case they need to
be dropped
- always clone the skbs to make sure they have a reference on the
socket, and prevent it from disappearing
- fix real payload length return value for RTR frames
- can: j1939: return failure on bind if netdev is down, rather than
waiting indefinitely
Misc:
- IPv6: reply ICMP error if the first fragment don't include all
headers to improve compliance with RFC 8200"
* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
ionic: check port ptr before use
r8169: work around short packet hw bug on RTL8125
net: openvswitch: silence suspicious RCU usage warning
chelsio/chtls: fix always leaking ctrl_skb
chelsio/chtls: fix memory leaks caused by a race
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
...
Ido Schimmel says:
====================
nexthop: Add support for nexthop objects offload
This patch set adds support for nexthop objects offload with a dummy
implementation over netdevsim. mlxsw support will be added later.
The general idea is very similar to route offload in that notifications
are sent whenever nexthop objects are changed. A listener can veto the
change and the error will be communicated to user space with extack.
To keep listeners as simple as possible, they not only receive
notifications for the nexthop object that is changed, but also for all
the other objects affected by this change. For example, when a single
nexthop is replaced, a replace notification is sent for the single
nexthop, but also for all the nexthop groups this nexthop is member in.
This relieves listeners from the need to track such dependencies.
To simplify things further for listeners, the notification info does not
contain the raw nexthop data structures (e.g., 'struct nexthop'), but
less complex data structures into which the raw data structures are
parsed into.
Tested with a new selftest over netdevsim and with fib_nexthops.sh:
Tests passed: 164
Tests failed: 0
Patch set overview:
Patches #1-#4 introduce the aforementioned data structures and convert
existing listeners (i.e., the VXLAN driver) to use them.
Patches #5-#6 add a new RTNH_F_TRAP flag and the ability to set it and
RTNH_F_OFFLOAD on nexthops. This flag is used by netdevsim for testing
purposes and will also be used by mlxsw. These flags are consistent with
the existing RTM_F_OFFLOAD and RTM_F_TRAP flags.
Patches #7-#14 gradually add the new nexthop notifications.
Patches #15-#18 add a dummy implementation for nexthop offload over
netdevsim and a selftest to exercise both good and bad flows.
Changes since RFC [1]:
Patch #1: s/is_encap/has_encap/
Patch #3: Add a blank line in __nh_notifier_single_info_init()
Patch #5: Reword commit message
Patch #6: s/nexthop_hw_flags_set/nexthop_set_hw_flags/
Patch #7: Reword commit message
Patch #11: Allocate extack on the stack
Follow-up patch sets:
selftests: forwarding: Add nexthop objects tests
mlxsw: Preparations for nexthop objects support - part 1/2
mlxsw: Preparations for nexthop objects support - part 2/2
mlxsw: Add support for nexthop objects
mlxsw: Add support for blackhole nexthops
mlxsw: Update adjacency index more efficiently
[1] https://lore.kernel.org/netdev/20200908091037.2709823-1-idosch@idosch.org/
====================
Link: https://lore.kernel.org/r/20201104133040.1125369-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test various aspects of the nexthop offload API on top of the netdevsim
implementation. Both good and bad flows are tested.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous patches added the ability to program nexthop objects.
Therefore, no longer forbid the programming of routes that point to such
objects.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement dummy nexthop "offload" in the driver by storing currently
"programmed" nexthops in a hash table. Each nexthop in the hash table is
marked with "trap" indication and increments the nexthops resource
occupancy.
This will later allow us to test the nexthop offload API on top of
netdevsim.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Spectrum ASIC has a dedicated table where nexthops (i.e., adjacency
entries) are populated. The size of this table can be controlled via
devlink-resource.
Add such a resource to netdevsim so that its occupancy will reflect the
number of nexthop objects currently programmed to the device.
By limiting the size of the resource, error paths could be exercised and
tested.
Example output:
# devlink resource show netdevsim/netdevsim10
netdevsim/netdevsim10:
name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
resources:
name fib size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
resources:
name fib size unlimited occ 1 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
name fib-rules size unlimited occ 2 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
name nexthops size unlimited occ 0 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove in-kernel route notifications when the configuration of their
nexthop changes.
These notifications are unnecessary because the route still uses the
same nexthop ID. A separate notification for the nexthop change itself
is now sent in the nexthop notification chain.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When registering a new notifier to the nexthop notification chain,
replay all the existing nexthops to the new notifier so that it will
have a complete picture of the available nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will be used by the next patch which extends the function to replay
all the existing nexthops to the notifier block being registered.
Device drivers will be able to pass extack to the function since it is
passed to them upon reload from devlink.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single nexthop is deleted, the configuration of all the groups
using the nexthop is effectively modified. In this case, emit a
notification in the nexthop notification chain for each modified group
so that listeners would not need to keep track of which nexthops are
member in which groups.
In the rare cases where the notification fails, emit an error to the
kernel log. This is done by allocating extack on the stack and printing
the error logged by the listener that rejected the notification.
Changes since RFC:
* Allocate extack on the stack
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single nexthop is replaced, the configuration of all the groups
using the nexthop is effectively modified. In this case, emit a
notification in the nexthop notification chain for each modified group
so that listeners would not need to keep track of which nexthops are
member in which groups.
The notification can only be emitted after the new configuration (i.e.,
'struct nh_info') is pointed at by the old shell (i.e., 'struct
nexthop'). Before that the configuration of the nexthop groups is still
the same as before the replacement.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The notification is emitted after all the validation checks were
performed, but before the new configuration (i.e., 'struct nh_info') is
pointed at by the old shell (i.e., 'struct nexthop'). This prevents the
need to perform rollback in case the notification is vetoed.
The next patch will also emit a replace notification for all the nexthop
groups in which the nexthop is used.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Emit a notification in the nexthop notification chain when an existing
nexthop group is replaced.
The notification is emitted after all the validation checks were
performed, but before the new configuration (i.e., 'struct nh_grp') is
pointed at by the old shell (i.e., 'struct nexthop'). This prevents the
need to perform rollback in case the notification is vetoed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Emit a notification in the nexthop notification chain when a new nexthop
is added (not replaced). The nexthop can either be a new group or a
single nexthop.
The notification is sent after the nexthop is inserted into the
red-black tree, as listeners might need to callback into the nexthop
code with the nexthop ID in order to mark the nexthop as offloaded.
A 'REPLACE' notification is emitted instead of 'ADD' as the distinction
between the two is not important for in-kernel listeners. In case the
listener is not familiar with the encoded nexthop ID, it can simply
treat it as a new one. This is also consistent with the route offload
API.
Changes since RFC:
* Reword commit message
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a function that can be called by device drivers to set "offload" or
"trap" indication on nexthops following nexthop notifications.
Changes since RFC:
* s/nexthop_hw_flags_set/nexthop_set_hw_flags/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The flag indicates to user space that the nexthop is not programmed to
forward packets in hardware, but rather to trap them to the CPU. This is
needed, for example, when the MAC of the nexthop neighbour is not
resolved and packets should reach the CPU to trigger neighbour
resolution.
The flag will be used in subsequent patches by netdevsim to test nexthop
objects programming to device drivers and in the future by mlxsw as
well.
Changes since RFC:
* Reword commit message
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the sole listener of the nexthop notification chain (the VXLAN
driver) to the new notification info.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare the new notification information so that it could be passed to
listeners in the new patch.
Changes since RFC:
* Add a blank line in __nh_notifier_single_info_init()
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The next patch will add extack to the notification info. This allows
listeners to veto notifications and communicate the reason to user space.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add data structures that will be used for nexthop replace and delete
notifications in the previously introduced nexthop notification chain.
New data structures are added instead of passing the existing nexthop
code structures directly for several reasons.
First, the existing structures encode a lot of bookkeeping information
which is irrelevant for listeners of the notification chain.
Second, the existing structures can be changed without worrying about
introducing regressions in listeners since they are not accessed
directly by them.
Third, listeners of the notification chain do not need to each parse the
relatively complex nexthop code structures. They are passing the
required information in a simplified way.
Note that a single 'has_encap' bit is added instead of the actual
encapsulation information since current listeners do not support such
nexthops.
Changes since RFC:
* s/is_encap/has_encap/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mimic the pre-existing ACPI and Device Tree event log behavior by not
creating the binary_bios_measurements file when the EFI TPM event log is
empty.
This fixes the following NULL pointer dereference that can occur when
reading /sys/kernel/security/tpm0/binary_bios_measurements after the
kernel received an empty event log from the firmware:
BUG: kernel NULL pointer dereference, address: 000000000000002c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 3932 Comm: fwupdtpmevlog Not tainted 5.9.0-00003-g629990edad62 #17
Hardware name: LENOVO 20LCS03L00/20LCS03L00, BIOS N27ET38W (1.24 ) 11/28/2019
RIP: 0010:tpm2_bios_measurements_start+0x3a/0x550
Code: 54 53 48 83 ec 68 48 8b 57 70 48 8b 1e 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 82 c0 06 00 00 48 8b 8a c8 06 00 00 <44> 8b 60 1c 48 89 4d a0 4c 89 e2 49 83 c4 20 48 83 fb 00 75 2a 49
RSP: 0018:ffffa9c901203db0 EFLAGS: 00010246
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000010
RDX: ffff8ba1eb99c000 RSI: ffff8ba1e4ce8280 RDI: ffff8ba1e4ce8258
RBP: ffffa9c901203e40 R08: ffffa9c901203dd8 R09: ffff8ba1ec443300
R10: ffffa9c901203e50 R11: 0000000000000000 R12: ffff8ba1e4ce8280
R13: ffffa9c901203ef0 R14: ffffa9c901203ef0 R15: ffff8ba1e4ce8258
FS: 00007f6595460880(0000) GS:ffff8ba1ef880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000002c CR3: 00000007d8d18003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? __kmalloc_node+0x113/0x320
? kvmalloc_node+0x31/0x80
seq_read+0x94/0x420
vfs_read+0xa7/0x190
ksys_read+0xa7/0xe0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In this situation, the bios_event_log pointer in the tpm_bios_log struct
was not NULL but was equal to the ZERO_SIZE_PTR (0x10) value. This was
due to the following kmemdup() in tpm_read_log_efi():
int tpm_read_log_efi(struct tpm_chip *chip)
{
...
/* malloc EventLog space */
log->bios_event_log = kmemdup(log_tbl->log, log_size, GFP_KERNEL);
if (!log->bios_event_log) {
ret = -ENOMEM;
goto out;
}
...
}
When log_size is zero, due to an empty event log from firmware,
ZERO_SIZE_PTR is returned from kmemdup(). Upon a read of the
binary_bios_measurements file, the tpm2_bios_measurements_start()
function does not perform a ZERO_OR_NULL_PTR() check on the
bios_event_log pointer before dereferencing it.
Rather than add a ZERO_OR_NULL_PTR() check in functions that make use of
the bios_event_log pointer, simply avoid creating the
binary_bios_measurements_file as is done in other event log retrieval
backends.
Explicitly ignore all of the events in the final event log when the main
event log is empty. The list of events in the final event log cannot be
accurately parsed without referring to the first event in the main event
log (the event log header) so the final event log is useless in such a
situation.
Fixes: 58cc1e4faf ("tpm: parse TPM event logs based on EFI table")
Link: https://lore.kernel.org/linux-integrity/E1FDCCCB-CA51-4AEE-AC83-9CDE995EAE52@canonical.com/
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Thiébaud Weksteen <tweek@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
There is a misconfiguration in the bios of the gpio pin used for the
interrupt in the T490s. When interrupts are enabled in the tpm_tis
driver code this results in an interrupt storm. This was initially
reported when we attempted to enable the interrupt code in the tpm_tis
driver, which previously wasn't setting a flag to enable it. Due to
the reports of the interrupt storm that code was reverted and we went back
to polling instead of using interrupts. Now that we know the T490s problem
is a firmware issue, add code to check if the system is a T490s and
disable interrupts if that is the case. This will allow us to enable
interrupts for everyone else. If the user has a fixed bios they can
force the enabling of interrupts with tpm_tis.interrupts=1 on the
kernel command line.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Saeed Mahameed says:
====================
mlx5-updates-2020-11-03
This series includes updates to mlx5 software steering component.
1) Few improvements in the DR area, such as removing unneeded checks,
renaming to better general names, refactor in some places, etc.
2) Software steering (DR) Memory management improvements
This patch series contains SW Steering memory management improvements:
using buddy allocator instead of an existing bucket allocator, and
several other optimizations.
The buddy system is a memory allocation and management algorithm
that manages memory in power of two increments.
The algorithm is well-known and well-described, such as here:
https://en.wikipedia.org/wiki/Buddy_memory_allocation
Linux uses this algorithm for managing and allocating physical pages,
as described here:
https://www.kernel.org/doc/gorman/html/understand/understand009.html
In our case, although the algorithm in principal is similar to the
Linux physical page allocator, the "building blocks" and the circumstances
are different: in SW steering, buddy allocator doesn't really allocates
a memory, but rather manages ICM (Interconnect Context Memory) that was
previously allocated and registered.
The ICM memory that is used in SW steering is always power
of 2 (order), so buddy system is a good fit for this.
Patches in this series:
[PATH 4] net/mlx5: DR, Add buddy allocator utilities
This patch adds a modified implementation of a well-known buddy allocator,
adjusted for SW steering needs: the algorithm in principal is similar to
the Linux physical page allocator, but in our case buddy allocator doesn't
really allocate a memory, but rather manages ICM memory that was previously
allocated and registered.
[PATH 5] net/mlx5: DR, Handle ICM memory via buddy allocation instead of bucket management
This patch changes ICM management of SW steering to use buddy-system mechanism
Instead of the previous bucket management.
[PATH 6] net/mlx5: DR, Sync chunks only during free
This patch makes syncing happen only when freeing memory chunks.
[PATH 7] net/mlx5: DR, ICM memory pools sync optimization
This patch adds tracking of pool's "hot" memory and makes the
check whether steering sync is required much shorter and faster.
[PATH 8] net/mlx5: DR, Free buddy ICM memory if it is unused
This patch adds tracking buddy's used ICM memory,
and frees the buddy if all its memory becomes unused.
3) Misc code cleanups
* tag 'mlx5-updates-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net: mlx5: Replace in_irq() usage
net/mlx5: Cleanup kernel-doc warnings
net/mlx4: Cleanup kernel-doc warnings
net/mlx5e: Validate stop_room size upon user input
net/mlx5: DR, Free unused buddy ICM memory
net/mlx5: DR, ICM memory pools sync optimization
net/mlx5: DR, Sync chunks only during free
net/mlx5: DR, Handle ICM memory via buddy allocation instead of buckets
net/mlx5: DR, Add buddy allocator utilities
net/mlx5: DR, Rename matcher functions to be more HW agnostic
net/mlx5: DR, Rename builders HW specific names
net/mlx5: DR, Remove unused member of action struct
====================
Link: https://lore.kernel.org/r/20201105201242.21716-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drm/imx: fixes and cleanups
Remove unused functions and empty callbacks, let the dw_hdmi-imx driver
reuse imx_drm_encoder_parse_of() instead of reimplementing it, replace
the custom register spinlock with the regmap default spinlock and remove
redundant tracking of enabled state in imx-tve, drop the explicit
drm_mode_config_cleanup() call in imx-drm-core, reduce the scope of edid
length variables that are not otherwise used in imx-ldb and
parallel-display, fix a memory leak in the parallel-display bind error
path, and drop an extraneous type qualifier from of_get_tve_mode().
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/7e4af582027bbec269364b95f6978d061b48271a.camel@pengutronix.de
Support ECM mode based on cdc_ether with relative mii functions,
when CONFIG_USB_RTL8152 is not set, or the device is not supported
by r8152 driver.
Both r8152 and r8153_ecm would check the return value of
rtl8152_get_version() in porbe(). If rtl8152_get_version()
return none zero value, the r8152 is used for the device
with vendor mode. Otherwise, the r8153_ecm is used for the
device with ECM mode.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/1394712342-15778-392-Taiwan-albertk@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei says:
====================
net: phy: add support for shared interrupts (part 1)
This patch set aims to actually add support for shared interrupts in
phylib and not only for multi-PHY devices. While we are at it,
streamline the interrupt handling in phylib.
For a bit of context, at the moment, there are multiple phy_driver ops
that deal with this subject:
- .config_intr() - Enable/disable the interrupt line.
- .ack_interrupt() - Should quiesce any interrupts that may have been
fired. It's also used by phylib in conjunction with .config_intr() to
clear any pending interrupts after the line was disabled, and before
it is going to be enabled.
- .did_interrupt() - Intended for multi-PHY devices with a shared IRQ
line and used by phylib to discern which PHY from the package was the
one that actually fired the interrupt.
- .handle_interrupt() - Completely overrides the default interrupt
handling logic from phylib. The PHY driver is responsible for checking
if any interrupt was fired by the respective PHY and choose
accordingly if it's the one that should trigger the link state machine.
From my point of view, the interrupt handling in phylib has become
somewhat confusing with all these callbacks that actually read the same
PHY register - the interrupt status. A more streamlined approach would
be to just move the responsibility to write an interrupt handler to the
driver (as any other device driver does) and make .handle_interrupt()
the only way to deal with interrupts.
Another advantage with this approach would be that phylib would gain
support for shared IRQs between different PHY (not just multi-PHY
devices), something which at the moment would require extending every
PHY driver anyway in order to implement their .did_interrupt() callback
and duplicate the same logic as in .ack_interrupt(). The disadvantage
of making .did_interrupt() mandatory would be that we are slightly
changing the semantics of the phylib API and that would increase
confusion instead of reducing it.
What I am proposing is the following:
- As a first step, make the .ack_interrupt() callback optional so that
we do not break any PHY driver amid the transition.
- Every PHY driver gains a .handle_interrupt() implementation that, for
the most part, would look like below:
irq_status = phy_read(phydev, INTR_STATUS);
if (irq_status < 0) {
phy_error(phydev);
return IRQ_NONE;
}
if (!(irq_status & irq_mask))
return IRQ_NONE;
phy_trigger_machine(phydev);
return IRQ_HANDLED;
- Remove each PHY driver's implementation of the .ack_interrupt() by
actually taking care of quiescing any pending interrupts before
enabling/after disabling the interrupt line.
- Finally, after all drivers have been ported, remove the
.ack_interrupt() and .did_interrupt() callbacks from phy_driver.
This patch set is part 1 and it addresses the changes needed in phylib
and 7 PHY drivers. The rest can be found on my Github branch here:
https://github.com/IoanaCiornei/linux/commits/phylib-shared-irq
I do not have access to most of these PHY's, therefore I Cc-ed the
latest contributors to the individual PHY drivers in order to have
access, hopefully, to more regression testing.
Changes in v2:
- Rework the .handle_interrupt() implementation for each driver so that
only the enabled interrupts are taken into account when
IRQ_NONE/IRQ_HANDLED it returned. The main idea is so that we avoid
falsely blaming a device for triggering an interrupt when this is not
the case.
The only devices for which I was unable to make this adjustment were
the BCM8706, BCM8727, BCMAC131 and BCM5241 since I do not have access
to their datasheets.
- I also updated the pseudo-code added in the cover-letter so that it's
more clear how a .handle_interrupt() callback should look like.
====================
Tested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201101125114.1316879-1-ciorneiioana@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Willy Liu <willy.liu@realtek.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Willy Liu <willy.liu@realtek.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It seems there are cases where the interrupts are handled by another
entity (ie an IRQ controller embedded inside the PHY) and do not need
any other interraction from phylib. For this kind of PHYs, like the
RTL8366RB, add the genphy_handle_interrupt_no_ack() function which just
triggers the link state machine.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
