"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The __NR_mmap isn't found on armhf. The mmap() is commonly available
system call and its wrapper is present on all architectures. So it should
be used directly. It solves problem for armhf and doesn't create problem
for other architectures.
Remove sys_mmap() functions as they aren't doing anything else other than
calling mmap(). There is no need to set errno = 0 manually as glibc
always resets it.
For reference errors are as following:
CC seal_elf
seal_elf.c: In function 'sys_mmap':
seal_elf.c:39:33: error: '__NR_mmap' undeclared (first use in this function)
39 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
mseal_test.c: In function 'sys_mmap':
mseal_test.c:90:33: error: '__NR_mmap' undeclared (first use in this function)
90 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
Link: https://lkml.kernel.org/r/20240809082511.497266-1-usama.anjum@collabora.com
Fixes: 4926c7a52d ("selftest mm/mseal memory sealing")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is only hotplug test for cpuset v1, just add base read/write test
for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since isolated CPUs can be reserved at boot time via the "isolcpus"
boot command line option, these pre-isolated CPUs may interfere with
testing done by test_cpuset_prs.sh.
With the previous commit that incorporates those boot time isolated CPUs
into "cpuset.cpus.isolated", we can check for those before testing is
started to make sure that there will be no interference. Otherwise,
this test will be skipped if incorrect test failure can happen.
As "cpuset.cpus.isolated" is now available in a non cgroup_debug kernel,
we don't need to check for its existence anymore.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
When building with clang, there's this warning:
vdso_test_getrandom.c:145:40: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
145 | static void *test_vdso_getrandom(void *)
| ^
vdso_test_getrandom.c:155:40: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
155 | static void *test_libc_getrandom(void *)
| ^
vdso_test_getrandom.c:165:43: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
165 | static void *test_syscall_getrandom(void *)
Add the named ctx parameter to quash it.
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
vdso_test_correctness test fails on powerpc:
~ # ./vdso_test_correctness
...
[RUN] Testing clock_gettime for clock CLOCK_REALTIME_ALARM (8)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_BOOTTIME_ALARM (9)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_SGI_CYCLE (10)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
...
[RUN] Testing clock_gettime for clock invalid (-1)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (-2147483648)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (2147483647)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
On powerpc, a call to a VDSO function is not an ordinary C function
call. Unlike several architectures which returns a negative error code
in case of an error, powerpc sets CR[SO] and returns the error code
as a positive value.
Define and use a macro called VDSO_CALL() which takes a pointer
to the function to call, the number of arguments and the arguments.
Also update ABI vdso documentation to reflect this subtlety.
Provide a specific version of VDSO_CALL() for powerpc that negates
the error code on return when CR[SO] is set.
Fixes: c7e5789b24 ("kselftest: Move test_vdso to the vDSO test suite")
Fixes: 2e9a972566 ("selftests: vdso: Add a selftest for vDSO getcpu()")
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Fixes: b2f1c3db28 ("kselftest: Extend vdso correctness test to clock_gettime64")
Fixes: 4920a2590e ("selftests/vDSO: add tests for vgetrandom")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Running vdso_test_correctness on powerpc64 gives the following warning:
~ # ./vdso_test_correctness
Warning: failed to find clock_gettime64 in vDSO
This is because vdso_test_correctness was built with VDSO_32BIT defined.
__powerpc__ macro is defined on both powerpc32 and powerpc64 so
__powerpc64__ needs to be checked first in vdso_config.h
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Following error occurs when running vdso_test_correctness on powerpc:
~ # ./vdso_test_correctness
[WARN] failed to find vDSO
[SKIP] No vDSO, so skipping clock_gettime() tests
[SKIP] No vDSO, so skipping clock_gettime64() tests
[RUN] Testing getcpu...
[OK] CPU 0: syscall: cpu 0, node 0
On powerpc, vDSO is neither called linux-vdso.so.1 nor linux-gate.so.1
but linux-vdso32.so.1 or linux-vdso64.so.1.
Also search those two names before giving up.
Fixes: c7e5789b24 ("kselftest: Move test_vdso to the vDSO test suite")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If the getrandom test compiles for an arch, don't exit fatally if the
actual cpu it's running on is unsupported.
Suggested-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Building test_vdso_getrandom currently leads to following issue:
In file included from /home/xry111/git-repos/linux/tools/include/linux/compiler_types.h:36,
from /home/xry111/git-repos/linux/include/uapi/linux/stddef.h:5,
from /home/xry111/git-repos/linux/include/uapi/linux/posix_types.h:5,
from /usr/include/asm/sigcontext.h:12,
from /usr/include/bits/sigcontext.h:30,
from /usr/include/signal.h:301,
from vdso_test_getrandom.c:14:
/home/xry111/git-repos/linux/tools/include/linux/compiler-gcc.h:3:2: error: #error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
3 | #error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
| ^~~~~
It's because the compiler_types.h inclusion in
include/uapi/linux/stddef.h is expected to be removed by the
header_install.sh script, as compiler_types.h shouldn't be used from
user space.
Add KHDR_INCLUDES before the existing include/uapi inclusion so that
usr/include takes precedence if it's populated.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
CONFIG_FUNCTION_ALIGNMENT=0 is no longer necessary and BULID_VDSO wasn't
spelled right while BUILD_VDSO isn't necessary, so just remove these.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
On systems that set -Wl,--as-needed, putting the -lsodium in the wrong
place on the command line means we get a linker error:
CC vdso_test_chacha
/usr/bin/ld: /tmp/ccKpjnSM.o: in function `main':
vdso_test_chacha.c:(.text+0x276): undefined reference to `crypto_stream_chacha20'
collect2: error: ld returned 1 exit status
Fix this by passing pkg-config's --libs output to the LDFLAGS field
instead of the CFLAGS field, as is customary.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When libsodium is installed into its own prefix, the --cflags output is
needed for the compiler to find libsodium headers.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Don't hard-code x86 specific names. Rather, use vdso_config definitions
to find the correct function matching the architecture.
Add random VDSO function names in names[][]. Remove the #ifdef
CONFIG_VDSO32, as having the name there all the time is harmless and
guaranties a steady index for following strings.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[Jason: add [6] to variable declaration rather than each usage site.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Building test_vdso_chacha currently leads to following issue:
In file included from /home/chleroy/linux-powerpc/include/linux/limits.h:7,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/local_lim.h:38,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/posix1_lim.h:161,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/limits.h:195,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/limits.h:203,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/syslimits.h:7,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/limits.h:34,
from /tmp/sodium/usr/local/include/sodium/export.h:7,
from /tmp/sodium/usr/local/include/sodium/crypto_stream_chacha20.h:14,
from vdso_test_chacha.c:6:
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:99:6: error: missing binary operator before token "("
99 | # if INT_MAX == 32767
| ^~~~~~~
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:102:7: error: missing binary operator before token "("
102 | # if INT_MAX == 2147483647
| ^~~~~~~
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:126:6: error: missing binary operator before token "("
126 | # if LONG_MAX == 2147483647
| ^~~~~~~~
This is due to kernel include/linux/limits.h being included instead of
libc's limits.h.
This is because directory include/ is added through option -isystem so
it goes prior to glibc's include directory.
Replace -isystem by -idirafter.
But this implies that now tools/include/linux/linkage.h is included
instead of include/linux/linkage.h, so define a stub for
SYM_FUNC_START() and SYM_FUNC_END().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Architectures use different location for vDSO sources:
arch/mips/vdso
arch/sparc/vdso
arch/arm64/kernel/vdso
arch/riscv/kernel/vdso
arch/csky/kernel/vdso
arch/x86/um/vdso
arch/x86/entry/vdso
arch/powerpc/kernel/vdso
arch/arm/vdso
arch/loongarch/vdso
Don't hard-code vdso sources location in selftest Makefile. Instead
create a vdso/ symbolic link in tools/arch/$arch/ and update Makefile
accordingly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than using pthread_get/set_specific, just use gcc's __thread
annotation, which is noticeably faster and makes the code more obvious.
Also, just have one simplified struct called vgrnd, instead of trying to
split things up semantically. Those divisions were useful when this code
was split across several commit *messages*, but doesn't make as much
sense within a single file. This should make the code more clear and
provide a better example for implementers.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Add a new arch_timer_edge_cases selftests that validates:
* timers above the max TVAL value
* timers in the past
* moving counters ahead and behind pending timers
* reprograming timers
* timers fired multiple times
* masking/unmasking using the timer control mask
These are intentionally unusual scenarios to stress compliance with
the arm architecture.
Co-developed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20240823175836.2798235-3-coltonlewis@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, wireless and netfilter.
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code"
* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
nfc: pn533: Add poll mod list filling check
mailmap: update entry for Sriram Yagnaraman
selftests: mptcp: join: check re-re-adding ID 0 signal
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: validate event numbers
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: pm: fix ID 0 endp usage after multiple re-creations
mptcp: pm: do not remove already closed subflows
selftests: mptcp: join: no extra msg if no counter
selftests: mptcp: join: check re-adding init endp with != id
mptcp: pm: reset MPC endp ID when re-added
mptcp: pm: skip connecting to already established sf
mptcp: pm: send ACK on an active subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: fix RM_ADDR ID for the initial subflow
mptcp: pm: reuse ID 0 after delete and re-add
net: busy-poll: use ktime_get_ns() instead of local_clock()
sctp: fix association labeling in the duplicate COOKIE-ECHO case
mptcp: pr_debug: add missing \n at the end
...
Charlie Jenkins <charlie@rivosinc.com> says:
There have been a couple of reports that using the hint address to
restrict the address returned by mmap hint address has caused issues in
applications. A different solution for restricting addresses returned by
mmap is necessary to avoid breakages.
[Palmer: This also just wasn't doing the right thing in the first place,
as it didn't handle the sv39 cases we were trying to deal with.]
* b4-shazam-merge:
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-0-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.
A new helper has been introduced to easily check these events. The
missing events have been added to the lib.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b911c97c7d ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" to validate the previous commit:
when the endpoint linked to the initial subflow (ID 0) is re-added
multiple times, it was no longer being used, because the internal linked
counters are not decremented for this special endpoint: it is not an
additional endpoint.
Here, the "del/add id 0" steps are done 3 times to unsure this case is
validated.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The checksum and fail counters might not be available. Then no need to
display an extra message with missing info.
While at it, fix the indentation around, which is wrong since the same
commit.
Fixes: 47867f0a7e ("selftests: mptcp: join: skip check if MIB counter not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID, but the kernel should still use the ID 0 if it corresponds
to the initial address.
This test validates this behaviour: the endpoint linked to the initial
subflow is removed, and re-added with a different ID.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Removing the endpoint linked to the initial subflow should trigger a
RM_ADDR for the right ID, and the removal of the subflow. That's what is
now being verified in the "delete and re-add" test.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Largely inspired from hid_bpf.c for the fixture setup.
Create a couple of tests for hidraw:
- create a uhid device and check if the fixture is working properly
- inject one uhid event and read it through hidraw
These tests are not that useful for now, but will be once we start adding
the ioctl and BPFs to revoke the hidraw node.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20240827-hidraw-revoke-v5-3-d004a7451aea@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Broonie reports that the set_id_regs test is failing as of commit
5cb57a1aff ("KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is
presented to the guest"). The test does not anticipate the 'late' ID
register fixup where KVM clobbers the GIC field in absence of GICv3.
While the field technically has FTR_LOWER_SAFE behavior, fix the issue
by setting it to an exact value of 0, matching the effect of the 'late'
fixup.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240829004622.3058639-1-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Thanks to the previous commit, the MPTCP subflows are now closed on both
directions even when only the MPTCP path-manager of one peer asks for
their closure.
In the two tests modified here -- "userspace pm add & remove address"
and "userspace pm create destroy subflow" -- one peer is controlled by
the userspace PM, and the other one by the in-kernel PM. When the
userspace PM sends a RM_ADDR notification, the in-kernel PM will
automatically react by closing all subflows using this address. Now,
thanks to the previous commit, the subflows are properly closed on both
directions, the userspace PM can then no longer closes the same
subflows if they are already closed. Before, it was OK to do that,
because the subflows were still half-opened, still OK to send a RM_ADDR.
In other words, thanks to the previous commit closing the subflows, an
error will be returned to the userspace if it tries to close a subflow
that has already been closed. So no need to run this command, which mean
that the linked counters will then not be incremented.
These tests are then no longer sending both a RM_ADDR, then closing the
linked subflow just after. The test with the userspace PM on the server
side is now removing one subflow linked to one address, then sending
a RM_ADDR for another address. The test with the userspace PM on the
client side is now only removing the subflow that was previously
created.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-2-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setup trace points, add a new ftrace instance in order to not interfere
with the rest of the system, filtering by net namespace cookies.
Raise a new background thread that parses trace_pipe, matches them with
the list of expected events.
Wiring up trace events to selftests provides another insight if there is
anything unexpected happining in the tcp-ao code (i.e. key rotation when
it's not expected).
Note: in real programs libtraceevent should be used instead of this
manual labor of setting ftrace up and parsing. I'm not using it here
as I don't want to have an .so library dependency that one would have to
bring into VM or DUT (Device Under Test). Please, don't copy it over
into any real world programs, that aren't tests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-8-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On tests that are expecting failure the timeout value is
TEST_RETRANSMIT_SEC == 1 second. Which is big enough for most of devices
under tests. But on a particularly slow machine/VM, 1 second might be
not enough for another thread to be scheduled and attempt to connect().
It is not a problem for tests that expect connect() to succeed as
the timeout value for them (TEST_TIMEOUT_SEC) is intentionally bigger.
One obvious way to solve this would be to increase TEST_RETRANSMIT_SEC.
But as all tests would increase the timeouts, that's going to sum up.
But here is less obvious way that keeps timeouts for expected connect()
failures low: just synchronize the two threads, which will assure that
before counter checks the other thread got a chance to run and timeout
on connect(). The expected increase of the related counter for listen()
socket will yet test the expected failure.
Never happens on my machine, but I suppose the majority of netdev's
connect-deny-* flakes [1] are caused by this.
Prevents the following testing issue:
> # selftests: net/tcp_ao: connect-deny_ipv6
> # 1..21
> # # 462[lib/setup.c:243] rand seed 1720905426
> # TAP version 13
> # ok 1 Non-AO server + AO client
> # not ok 2 Non-AO server + AO client: TCPAOKeyNotFound counter did not increase: 0 <= 0
> # ok 3 AO server + Non-AO client
> # ok 4 AO server + Non-AO client: counter TCPAORequired increased 0 => 1
...
[1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao/results/681741/6-connect-deny-ipv6/stdout
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-7-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's not safe to use '%zu' specifier for printing uint64_t on 32-bit
systems. For uint64_t, we should use the 'PRIu64' macro from
the inttypes.h library. This ensures that the uint64_t is printed
correctly from the selftests regardless of the system architecture.
Signed-off-by: Mohammad Nassiri <mnassiri@ciena.com>
[Added missing spaces in fail/ok messages and uint64_t cast in
setsockopt-closed, as otherwise it was giving warnings on 64bit.
And carried it to netdev ml]
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-6-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It turns to be that open_netns() is called rarely from the child-thread
and more often from parent-thread. Yet, on initialization of kconfig
checks, either of threads may reach kconfig_lock mutex first.
VRF-related checks do create a temporary ksft-check VRF in
an unshare()'d namespace and than setns() back to the original.
As original was opened from "/proc/self/ns/net", it's valid for
thread-leader (parent), but it's invalid for the child, resulting
in the following failure on tests that check has_vrfs() support:
> # ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> # not ok 55 # error 381[unsigned-md5.c:24] Failed to add a VRF: -17
> # not ok 56 # error 383[unsigned-md5.c:33] Failed to add a route to VRF: -22: Key was rejected by service
> not ok 1 selftests: net/tcp_ao: unsigned-md5_ipv6 # exit=1
Use "/proc/thread-self/ns/net" which is valid for any thread.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-4-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the functions in tcp-ao lib/ return negative errno or -1 in case
of a failure. That creates inconsistencies in lib/kconfig, which saves
what was the error code. As well as the uninitialized kconfig value is
-1, which also may be the result of a check.
Define KCONFIG_UNKNOWN and save negative return code, rather than
libc-style errno.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-3-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of pre-allocating a fixed-sized buffer of TEST_MSG_BUFFER_SIZE
and printing into it, call vsnprintf() with str = NULL, which will
return the needed size of the buffer. This hack is documented in
man 3 vsnprintf.
Essentially, in C++ terms, it re-invents std::stringstream, which is
going to be used to print different tracing paths and formatted strings.
Use it straight away in __test_print() - which is thread-safe version of
printing in selftests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-2-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
