Add 3 test cases for skb dynptr used in tp_btf:
- test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is
read-only.
- skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb
should fail in fentry/fexit.
In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb,
test_pkt_access is used for its test_run, as in kfree_skb.c. Because the
test process is different from others, a new setup type is defined,
i.e., SETUP_SKB_PROG_TP.
The result is like:
$ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf'
#84/14 dynptr/test_dynptr_skb_tp_btf:OK
#84 dynptr:OK
#127 kfunc_dynptr_param:OK
Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED
$ ./test_progs -t 'dynptr/skb_invalid_ctx_f'
#84/85 dynptr/skb_invalid_ctx_fentry:OK
#84/86 dynptr/skb_invalid_ctx_fexit:OK
#84 dynptr:OK
#127 kfunc_dynptr_param:OK
Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED
Also fix two coding style nits (change spaces to tabs).
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240911033719.91468-6-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Currently, xskxceiver assumes that MAX_SKB_FRAGS value is always 17
which is not true - since the introduction of BIG TCP this can now take
any value between 17 to 45 via CONFIG_MAX_SKB_FRAGS.
Adjust the TOO_MANY_FRAGS test case to read the currently configured
MAX_SKB_FRAGS value by reading it from /proc/sys/net/core/max_skb_frags.
If running system does not provide that sysctl file then let us try
running the test with a default value.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240910124129.289874-1-maciej.fijalkowski@intel.com
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-09-10
1) Remove an unneeded WARN_ON on packet offload.
From Patrisious Haddad.
2) Add a copy from skb_seq_state to buffer function.
This is needed for the upcomming IPTFS patchset.
From Christian Hopps.
3) Spelling fix in xfrm.h.
From Simon Horman.
4) Speed up xfrm policy insertions.
From Florian Westphal.
5) Add and revert a patch to support xfrm interfaces
for packet offload. This patch was just half cooked.
6) Extend usage of the new xfrm_policy_is_dead_or_sk helper.
From Florian Westphal.
7) Update comments on sdb and xfrm_policy.
From Florian Westphal.
8) Fix a null pointer dereference in the new policy insertion
code From Florian Westphal.
9) Fix an uninitialized variable in the new policy insertion
code. From Nathan Chancellor.
* tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: Restore dir assignments in xfrm_hash_rebuild()
xfrm: policy: fix null dereference
Revert "xfrm: add SA information to the offloaded packet"
xfrm: minor update to sdb and xfrm_policy comments
xfrm: policy: use recently added helper in more places
xfrm: add SA information to the offloaded packet
xfrm: policy: remove remaining use of inexact list
xfrm: switch migrate to xfrm_policy_lookup_bytype
xfrm: policy: don't iterate inexact policies twice at insert time
selftests: add xfrm policy insertion speed test script
xfrm: Correct spelling in xfrm.h
net: add copy from skb_seq_state to buffer function
xfrm: Remove documentation WARN_ON to limit return values for offloaded SA
====================
Link: https://patch.msgid.link/20240910065507.2436394-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Padding is not included in UDP and TCP checksums. Therefore, reduce the
length of the checksummed data to include only the data in the IP
payload. This fixes spurious reported checksum failures like
rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe
pkt: bad csum
Technically it is possible for there to be trailing bytes after the UDP
data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) +
udp.len < ip.len). However, we don't generate such packets.
Fixes: 91a7de8560 ("selftests/net: add csum offload test")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lay the groundwork to import into kselftests the over 150 packetdrill
TCP/IP conformance tests on github.com/google/packetdrill.
Florian recently added support for packetdrill tests in nf_conntrack,
in commit a8a388c2aa ("selftests: netfilter: add packetdrill based
conntrack tests").
This patch takes a slightly different approach. It relies on
ksft_runner.sh to run every *.pkt file in the directory.
Any future imports of packetdrill tests should require no additional
coding. Just add the *.pkt files.
Initially import only two features/directories from github. One with a
single script, and one with two. This was the only reason to pick
tcp/inq and tcp/md5.
The path replaces the directory hierarchy in github with a flat space
of files: $(subst /,_,$(wildcard tcp/**/*.pkt)). This is the most
straightforward option to integrate with kselftests. The Linked thread
reviewed two ways to maintain the hierarchy: TEST_PROGS_RECURSE and
PRESERVE_TEST_DIRS. But both introduce significant changes to
kselftest infra and with that risk to existing tests.
Implementation notes:
- restore alphabetical order when adding the new directory to
tools/testing/selftests/Makefile
- imported *.pkt files and support verbatim from the github project,
except for
- update `source ./defaults.sh` path (to adjust for flat dir)
- add SPDX headers
- remove one author statement
- Acknowledgment: drop an e (checkpatch)
Tested:
make -C tools/testing/selftests \
TARGETS=net/packetdrill \
run_tests
make -C tools/testing/selftests \
TARGETS=net/packetdrill \
install INSTALL_PATH=$KSFT_INSTALL_PATH
# in virtme-ng
./run_kselftest.sh -c net/packetdrill
./run_kselftest.sh -t net/packetdrill:tcp_inq_client.pkt
Link: https://lore.kernel.org/netdev/20240827193417.2792223-1-willemdebruijn.kernel@gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905231653.2427327-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support testcases that are themselves not executable, but need an
interpreter to run them.
If a test file is not executable, but an executable file
ksft_runner.sh exists in the TARGET dir, kselftest will run
./ksft_runner.sh ./$BASENAME_TEST
Packetdrill may add hundreds of packetdrill scripts for testing. These
scripts must be passed to the packetdrill process.
Have kselftest run each test directly, as it already solves common
runner requirements like parallel execution and isolation (netns).
A previous RFC added a wrapper in between, which would have to
reimplement such functionality.
Link: https://lore.kernel.org/netdev/66d4d97a4cac_3df182941a@willemb.c.googlers.com.notmuch/T/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905231653.2427327-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is nice to have a visual alignment in the test output to present the
different results, but it makes less sense in the TAP output that is
there for computers.
It sounds then better to remove the duplicated whitespaces in the TAP
output, also because it can cause some issues with TAP parsers expecting
only one space around the directive delimiter (#).
While at it, change the variable name (result_msg) to something more
explicit.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240906-net-next-mptcp-ksft-subtest-time-v2-5-31d5ee4f3bdf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When I was trying to modify the tx timestamping feature, I found that
running "./txtimestamp -4 -C -L 127.0.0.1" didn't reflect the error:
I succeeded to generate timestamp stored in the skb but later failed
to report it to the userspace (which means failed to put css into cmsg).
It can happen when someone writes buggy codes in __sock_recv_timestamp(),
for example.
After adding the check so that running ./txtimestamp will reflect the
result correctly like this if there is a bug in the reporting phase:
protocol: TCP
payload: 10
server port: 9000
family: INET
test SND
USR: 1725458477 s 667997 us (seq=0, len=0)
Failed to report timestamps
USR: 1725458477 s 718128 us (seq=0, len=0)
Failed to report timestamps
USR: 1725458477 s 768273 us (seq=0, len=0)
Failed to report timestamps
USR: 1725458477 s 818416 us (seq=0, len=0)
Failed to report timestamps
...
In the future, it will help us detect whether the new coming patch has
bugs or not.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905160035.62407-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently exec-target.c is linked statically with libc, which on Fedora
at least requires installing an additional package (glibc-static).
If that package is not installed the build fails with:
CC exec_target
/usr/bin/ld: cannot find -lc: No such file or directory
collect2: error: ld returned 1 exit status
All exec_target.c does is call sys_exit, which can be done easily enough
using inline assembly, and removes the requirement for a static libc to
be installed.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240812094152.418586-1-maddy@linux.ibm.com
Pull RISC-V fixes from Palmer Dabbelt:
- A revert for the mmap() change that ties the allocation range to the
hint adress, as what we tried to do ended up regressing on other
userspace workloads.
- A fix to avoid a kernel memory leak when emulating misaligned
accesses from userspace.
- A Kconfig fix for toolchain vector detection, which now correctly
detects vector support on toolchains where the V extension depends on
the M extension.
- A fix to avoid failing the linear mapping bootmem bounds check on
NOMMU systems.
- A fix for early alternatives on relocatable kernels.
* tag 'riscv-for-linus-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix RISCV_ALTERNATIVE_EARLY
riscv: Do not restrict memory size because of linear mapping on nommu
riscv: Fix toolchain vector detection
riscv: misaligned: Restrict user access to kernel memory
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
When resctrl is built on architectures without __cpuid_count()
support, build fails. resctrl uses __cpuid_count() defined in
kselftest.h.
Even though the problem is seen while building resctrl on aarch64,
this error can be seen on any platform that doesn't support CPUID.
CPUID is a x86/x86-64 feature and code paths with CPUID asm commands
will fail to build on all other architectures.
All others tests call __cpuid_count() do so from x86/x86_64 code paths
when _i386__ or __x86_64__ are defined. resctrl is an exception.
Fix the problem by defining __cpuid_count() only when __i386__ or
__x86_64__ are defined in kselftest.h and changing resctrl to call
__cpuid_count() only when __i386__ or __x86_64__ are defined.
In file included from resctrl.h:24,
from cat_test.c:11:
In function ‘arch_supports_noncont_cat’,
inlined from ‘noncont_cat_run_test’ at cat_test.c:326:6:
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:304:17: note: in expansion of macro ‘__cpuid_count’
304 | __cpuid_count(0x10, 1, eax, ebx, ecx, edx);
| ^~~~~~~~~~~~~
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:306:17: note: in expansion of macro ‘__cpuid_count’
306 | __cpuid_count(0x10, 2, eax, ebx, ecx, edx);
Fixes: ae638551ab ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/lkml/20240809071059.265914-1-usama.anjum@collabora.com/
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix crash when btf_parse_base() returns an error (Martin Lau)
- Fix out of bounds access in btf_name_valid_section() (Jeongjun Park)
* tag 'bpf-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a selftest to check for incorrect names
bpf: add check for invalid name in btf_name_valid_section()
bpf: Fix a crash when btf_parse_base() returns an error pointer
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, bluetooth and wireless.
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during
mcp251x_open
- eth: r8152: fix the firmware communication error due to use of bulk
write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h"
* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
ila: call nf_unregister_net_hooks() sooner
tools/net/ynl: fix cli.py --subscribe feature
MAINTAINERS: fix ptp ocp driver maintainers address
selftests: net: enable bind tests
net: dsa: vsc73xx: fix possible subblocks range of CAPT block
sched: sch_cake: fix bulk flow accounting logic for host fairness
docs: netdev: document guidance on cleanup.h
net: xilinx: axienet: Fix race in axienet_stop
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
r8152: fix the firmware doesn't work
fou: Fix null-ptr-deref in GRO.
bareudp: Fix device stats updates.
net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
bpf, net: Fix a potential race in do_sock_getsockopt()
net: dqs: Do not use extern for unused dql_group
sch/netem: fix use after free in netem_dequeue
usbnet: modern method to get random MAC
MAINTAINERS: wifi: cw1200: add net-cw1200.h
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
...
With uprobe_unregister() having grown a synchronize_srcu(), it becomes
fairly slow to call. Esp. since both users of this API call it in a
loop.
Peel off the sync_srcu() and do it once, after the loop.
We also need to add uprobe_unregister_sync() into uprobe_register()'s
error handling path, as we need to be careful about returning to the
caller before we have a guarantee that partially attached consumer won't
be called anymore. This is an unlikely slow path and this should be
totally fine to be slow in the case of a failed attach.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-6-andrii@kernel.org
Filter out nodes that have one of its ancestors disabled as they aren't
expected to probe.
This removes the following false-positive failures on the
sc7180-trogdor-lazor-limozeen-nots-r5 platform:
/soc@0/geniqup@8c0000/i2c@894000/proximity@28
/soc@0/geniqup@ac0000/spi@a90000/ec@0
/soc@0/remoteproc@62400000/glink-edge/apr
/soc@0/remoteproc@62400000/glink-edge/apr/service@3
/soc@0/remoteproc@62400000/glink-edge/apr/service@4
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/clock-controller
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@7
/soc@0/remoteproc@62400000/glink-edge/apr/service@7/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@8
/soc@0/remoteproc@62400000/glink-edge/apr/service@8/routing
/soc@0/remoteproc@62400000/glink-edge/fastrpc
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@3
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@4
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@5
/soc@0/spmi@c440000/pmic@0/pon@800/pwrkey
Fixes: 14571ab1ad ("kselftest: Add new test for detecting unprobed Devicetree devices")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240729-dt-kselftest-parent-disabled-v2-1-d7a001c4930d@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904014441.1065753-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix eventfs ownership testcase to find mount point if stat -c "%m" failed.
This can happen on the system based on busybox. In this case, this will
try to use the current working directory, which should be a tracefs top
directory (and eventfs is mounted as a part of tracefs.)
If it does not work, the test is skipped as UNRESOLVED because of
the environmental problem.
Fixes: ee9793be08 ("tracing/selftests: Add ownership modification tests for eventfs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add the SO_PEEK_OFF selftest for UDP. In this patch, I mainly do
three things:
1. rename tcp_so_peek_off.c
2. adjust for UDP protocol
3. add selftests into it
Suggested-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The encoding of the pkey register differs on arm64, than on x86/ppc. On those
platforms, a bit in the register is used to disable permissions, for arm64, a
bit enabled in the register indicates that the permission is allowed.
This drops two asserts of the form:
assert(read_pkey_reg() <= orig_pkey_reg);
Because on arm64 this doesn't hold, due to the encoding.
The pkey must be reset to both access allow and write allow in the signal
handler. pkey_access_allow() works currently for PowerPC as the
PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE have overlapping bits set.
Access to the uc_mcontext is abstracted, as arm64 has a different structure.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240822151113.1479789-27-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Instead of displaying 'invert' when looking at some events like MP_FAIL,
MP_FASTCLOSE, MP_RESET, RM_ADDR, which is a bit vague because they are
not traditionnaly sent from one side, the host being checked is now
printed.
For the ADD_ADDR, only display the host when it is the client sending
it, which is more unusual.
Also before, the 'invert' message was printed after a few checks, but it
was not clear which ones exactly.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-8-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few new MPJoinSynTx MIB counters have been added in a previous commit.
They are being validated here in mptcp_join.sh selftest, each time the
number of received MPJ are checked.
Most of the time, the number of sent SYN+MPJ is the same as the received
ones. But sometimes, there are more, because there are dropped, or there
are errors.
While at it, the "no MPC reuse with single endpoint" subtest has been
modified to force a bind() error.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-6-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chk_join_nr() currently takes 9 positional parameters, 6 of them are
optional. It makes it hard to read:
chk_join_nr 1 1 1 1 0 1 1 0 4
Naming these vars helps to make it easier to read:
join_csum_ns1=1 join_csum_ns2=0 \
join_fail_nr=1 join_rst_nr=1 join_infi_nr=0 \
join_corrupted_pkts=4 \
chk_join_nr 1 1 1
It will then be easier to add new optional parameters.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-4-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add return value checks for read & write calls in test_listmount_ns
function. This patch resolves below compilation warnings:
```
statmount_test_ns.c: In function ‘test_listmount_ns’:
statmount_test_ns.c:322:17: warning: ignoring return value of ‘write’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
statmount_test_ns.c:323:17: warning: ignoring return value of ‘read’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
```
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The sctp selftest is very slow on debug kernels.
Its possible that the nf_queue listener program exits due to timeout
before first sctp packet is processed.
In this case socat hangs until script times out.
Fix this by removing the -t option where possible and kill the test
program once the file transfer/socat has exited.
-t sets SO_RCVTIMEO, its inteded for the 'ping' part of the selftest
where we want to make sure that packets get reinjected properly without
skipping a second queue request.
While at it, add a helper to compare the (binary) files instead of diff.
The 'diff' part was copied from a another sub-test that compares text.
Let helper dump file sizes on error so we can see the progress made.
Tested on an old 2010-ish box with a debug kernel and 100 iterations.
This is a followup to the earlier filesize reduction change.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240829080109.GB30766@breakpoint.cc/
Fixes: 0a8b08c554 ("selftests: netfilter: nft_queue.sh: reduce test file size for debug build")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240830092254.8029-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
