Johannes Berg says:
====================
Just a few updates:
- a set of buffer overflow fixes
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability
* tag 'wireless-2025-09-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
wifi: libertas: cap SSID len in lbs_associate()
wifi: cw1200: cap SSID length in cw1200_do_join()
wifi: ath11k: fix group data packet drops during rekey
wifi: ath12k: Set EMLSR support flag in MLO flags for EML-capable stations
====================
Link: https://patch.msgid.link/20250903075602.30263-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeff Johnson says:
==================
ath.git update for v6.17-rc5
Fix a long-standing issue with ath11k dropping group data packets
during GTK rekey, and fix an omission in the ath12k multi-link EMLSR
support introduced in v6.16.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix multiple fwnode reference leaks:
1. The function calls fwnode_get_named_child_node() to get the "leds" node,
but never calls fwnode_handle_put(leds) to release this reference.
2. Within the fwnode_for_each_child_node() loop, the early return
paths that don't properly release the "led" fwnode reference.
This fix follows the same pattern as commit d029edefed
("net dsa: qca8k: fix usages of device_get_named_child_node()")
Fixes: 94a2a84f5e ("net: dsa: mv88e6xxx: Support LED control")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250901073224.2273103-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
vxlan: Fix NPDs when using nexthop objects
With FDB nexthop groups, VXLAN FDB entries do not necessarily point to
a remote destination but rather to an FDB nexthop group. This means that
first_remote_{rcu,rtnl}() can return NULL and a few places in the driver
were not ready for that, resulting in NULL pointer dereferences.
Patches #1-#2 fix these NPDs.
Note that vxlan_fdb_find_uc() still dereferences the remote returned by
first_remote_rcu() without checking that it is not NULL, but this
function is only invoked by a single driver which vetoes the creation of
FDB nexthop groups. I will patch this in net-next to make the code less
fragile.
Patch #3 adds a selftests which exercises these code paths and tests
basic Tx functionality with FDB nexthop groups. I verified that the test
crashes the kernel without the first two patches.
====================
Link: https://patch.msgid.link/20250901065035.159644-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test cases for VXLAN with FDB nexthop groups, testing both IPv4 and
IPv6. Test basic Tx functionality as well as some corner cases.
Example output:
# ./test_vxlan_nh.sh
TEST: VXLAN FDB nexthop: IPv4 basic Tx [ OK ]
TEST: VXLAN FDB nexthop: IPv6 basic Tx [ OK ]
TEST: VXLAN FDB nexthop: learning [ OK ]
TEST: VXLAN FDB nexthop: IPv4 proxy [ OK ]
TEST: VXLAN FDB nexthop: IPv6 proxy [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the "proxy" option is enabled on a VXLAN device, the device will
suppress ARP requests and IPv6 Neighbor Solicitation messages if it is
able to reply on behalf of the remote host. That is, if a matching and
valid neighbor entry is configured on the VXLAN device whose MAC address
is not behind the "any" remote (0.0.0.0 / ::).
The code currently assumes that the FDB entry for the neighbor's MAC
address points to a valid remote destination, but this is incorrect if
the entry is associated with an FDB nexthop group. This can result in a
NPD [1][3] which can be reproduced using [2][4].
Fix by checking that the remote destination exists before dereferencing
it.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_xmit+0xb58/0x15f0
[...]
Call Trace:
<TASK>
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
packet_sendmsg+0x113a/0x1850
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
#!/bin/bash
ip address add 192.0.2.1/32 dev lo
ip nexthop add id 1 via 192.0.2.2 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy
ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0
bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10
arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3
[3]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014
RIP: 0010:vxlan_xmit+0x803/0x1600
[...]
Call Trace:
<TASK>
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
ip6_finish_output2+0x210/0x6c0
ip6_finish_output+0x1af/0x2b0
ip6_mr_output+0x92/0x3e0
ip6_send_skb+0x30/0x90
rawv6_sendmsg+0xe6e/0x12e0
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f383422ec77
[4]
#!/bin/bash
ip address add 2001:db8:1::1/128 dev lo
ip nexthop add id 1 via 2001:db8:1::1 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy
ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0
bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10
ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0
Fixes: 1274e1cc42 ("vxlan: ecmp support for mac fdb entries")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VXLAN FDB entries can point to either a remote destination or an FDB
nexthop group. The latter is usually used in EVPN deployments where
learning is disabled.
However, when learning is enabled, an incoming packet might try to
refresh an FDB entry that points to an FDB nexthop group and therefore
does not have a remote. Such packets should be dropped, but they are
only dropped after dereferencing the non-existent remote, resulting in a
NPD [1] which can be reproduced using [2].
Fix by dropping such packets earlier. Remove the misleading comment from
first_remote_rcu().
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_snoop+0x98/0x1e0
[...]
Call Trace:
<TASK>
vxlan_encap_bypass+0x209/0x240
encap_bypass_if_local+0xb1/0x100
vxlan_xmit_one+0x1375/0x17e0
vxlan_xmit+0x6b4/0x15f0
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
packet_sendmsg+0x113a/0x1850
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
#!/bin/bash
ip address add 192.0.2.1/32 dev lo
ip address add 192.0.2.2/32 dev lo
ip nexthop add id 1 via 192.0.2.3 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass
ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning
bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020
bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10
mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q
Fixes: 1274e1cc42 ("vxlan: ecmp support for mac fdb entries")
Reported-by: Marlin Cremers <mcremers@cloudbear.nl>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: fix optical SFP failures
A regression was reported back in April concerning pcs-lynx and 10G
optical SFPs. This patch series addresses that regression, and likely
similar unreported regressions.
These patches:
- Add phy_interface_weight() which will be used in the solution.
- Split out the code that determines the inband "type" for an
interface mode.
- Clear the Autoneg bit in the advertising mask, or the Autoneg bit
in the support mask and the entire advertising mask if the selected
interface mode has no inband capabilties.
Tested with the mvpp2 patch posted earlier today.
====================
Link: https://patch.msgid.link/aLSHmddAqiCISeK3@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mathew reports that as a result of commit 6561f0e547 ("net: pcs:
pcs-lynx: implement pcs_inband_caps() method"), 10G SFP modules no
longer work with the Lynx PCS.
This problem is not specific to the Lynx PCS, but is caused by commit
df874f9e52 ("net: phylink: add pcs_inband_caps() method") which added
validation of the autoneg state to the optical SFP configuration path.
Fix this by handling interface modes that fundamentally have no
inband negotiation more correctly - if we only have a single interface
mode, clear the Autoneg support bit and the advertising mask. If the
module can operate with several different interface modes, autoneg may
be supported for other modes, so leave the support mask alone and just
clear the Autoneg bit in the advertising mask.
This restores 10G optical module functionality with PCS that supply
their inband support, and makes ethtool output look sane.
Reported-by: Mathew McBride <matt@traverse.com.au>
Closes: https://lore.kernel.org/r/025c0ebe-5537-4fa3-b05a-8b835e5ad317@app.fastmail.com
Fixes: df874f9e52 ("net: phylink: add pcs_inband_caps() method")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/E1uslwx-00000001SPB-2kiM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When tcp_ao_copy_all_matching() fails in tcp_v6_syn_recv_sock() it just
exits the function. This ends up causing a memory-leak:
unreferenced object 0xffff0000281a8200 (size 2496):
comm "softirq", pid 0, jiffies 4295174684
hex dump (first 32 bytes):
7f 00 00 06 7f 00 00 06 00 00 00 00 cb a8 88 13 ................
0a 00 03 61 00 00 00 00 00 00 00 00 00 00 00 00 ...a............
backtrace (crc 5ebdbe15):
kmemleak_alloc+0x44/0xe0
kmem_cache_alloc_noprof+0x248/0x470
sk_prot_alloc+0x48/0x120
sk_clone_lock+0x38/0x3b0
inet_csk_clone_lock+0x34/0x150
tcp_create_openreq_child+0x3c/0x4a8
tcp_v6_syn_recv_sock+0x1c0/0x620
tcp_check_req+0x588/0x790
tcp_v6_rcv+0x5d0/0xc18
ip6_protocol_deliver_rcu+0x2d8/0x4c0
ip6_input_finish+0x74/0x148
ip6_input+0x50/0x118
ip6_sublist_rcv+0x2fc/0x3b0
ipv6_list_rcv+0x114/0x170
__netif_receive_skb_list_core+0x16c/0x200
netif_receive_skb_list_internal+0x1f0/0x2d0
This is because in tcp_v6_syn_recv_sock (and the IPv4 counterpart), when
exiting upon error, inet_csk_prepare_forced_close() and tcp_done() need
to be called. They make sure the newsk will end up being correctly
free'd.
tcp_v4_syn_recv_sock() makes this very clear by having the put_and_exit
label that takes care of things. So, this patch here makes sure
tcp_v4_syn_recv_sock and tcp_v6_syn_recv_sock have similar
error-handling and thus fixes the leak for TCP-AO.
Fixes: 06b22ef295 ("net/tcp: Wire TCP-AO to request sockets")
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250830-tcpao_leak-v1-1-e5878c2c3173@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 8401a108a6.
I got a report from an (anonymous) Sundance user:
Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)
Revert the driver back in. Make following changes:
- update Denis's email address in MAINTAINERS
- adjust to timer API renames:
- del_timer_sync() -> timer_delete_sync()
- from_timer() -> timer_container_of()
Fixes: 8401a108a6 ("eth: remove the DLink/Sundance (ST201) driver")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901210818.1025316-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During GTK rekey, mac80211 issues a clear key (if the old key exists)
followed by an install key operation in the same context. This causes
ath11k to send two WMI commands in quick succession: one to clear the
old key and another to install the new key in the same slot.
Under certain conditions—especially under high load or time sensitive
scenarios, firmware may process these commands asynchronously in a way
that firmware assumes the key is cleared whereas hardware has a valid key.
This inconsistency between hardware and firmware leads to group addressed
packet drops. Only setting the same key again can restore a valid key in
firmware and allow packets to be transmitted.
This issue remained latent because the host's clear key commands were
not effective in firmware until commit 436a4e8865 ("ath11k: clear the
keys properly via DISABLE_KEY"). That commit enabled the host to
explicitly clear group keys, which inadvertently exposed the race.
To mitigate this, restrict group key clearing across all modes (AP, STA,
MESH). During rekey, the new key can simply be set on top of the previous
one, avoiding the need for a clear followed by a set.
However, in AP mode specifically, permit group key clearing when no
stations are associated. This exception supports transitions from secure
modes (e.g., WPA2/WPA3) to open mode, during which all associated peers
are removed and the group key is cleared as part of the transition.
Add a per-BSS station counter to track the presence of stations during
set key operations. Also add a reset_group_keys flag to track the key
re-installation state and avoid repeated installation of the same key
when the number of connected stations transitions to non-zero within a
rekey period.
Additionally, for AP and Mesh modes, when the first station associates,
reinstall the same group key that was last set. This ensures that the
firmware recovers from any race that may have occurred during a previous
key clear when no stations were associated.
This change ensures that key clearing is permitted only when no clients
are connected, avoiding packet loss while enabling dynamic security mode
transitions.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Reported-by: Steffen Moser <lists@steffen-moser.de>
Closes: https://lore.kernel.org/linux-wireless/c6366409-9928-4dd7-bf7b-ba7fcf20eabf@steffen-moser.de
Fixes: 436a4e8865 ("ath11k: clear the keys properly via DISABLE_KEY")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250810170018.1124014-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, when updating EMLSR capabilities of a multi-link (ML) station,
only the EMLSR parameters (e.g., padding delay, transition delay, and
timeout) are sent to firmware. However, firmware also requires the
EMLSR support flag to be set in the MLO flags of the peer assoc WMI
command to properly handle EML operating mode notification frames.
Set the ATH12K_WMI_FLAG_MLO_EMLSR_SUPPORT flag in the peer assoc WMI
command when the ML station is EMLSR-capable, so that the firmware can
respond to EHT EML action frames from associated stations.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 4bcf9525bc ("wifi: ath12k: update EMLSR capabilities of ML Station")
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250801104920.3326352-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In the TX completion packet stage of TI SoCs with CPSW2G instance, which
has single external ethernet port, ndev is accessed without being
initialized if no TX packets have been processed. It results into null
pointer dereference, causing kernel to crash. Fix this by having a check
on the number of TX packets which have been processed.
Fixes: 9a369ae3d1 ("net: ethernet: ti: am65-cpsw: remove am65_cpsw_nuss_tx_compl_packets_2g()")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250829121051.2031832-1-c-vankar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- fix OOB read/write in network-coding decode, by Stanislav Fort
* tag 'batadv-net-pullrequest-20250901' of https://git.open-mesh.org/linux-merge:
batman-adv: fix OOB read/write in network-coding decode
====================
Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code currently reads both U32 attributes and U64 attributes as
U64, so when a U32 attribute is provided by userspace (ie, when not
using XPN), on big endian systems, we'll load that value into the
upper 32bits of the next_pn field instead of the lower 32bits. This
means that the value that userspace provided is ignored (we only care
about the lower 32bits for non-XPN), and we'll start using PNs from 0.
Switch to nla_get_uint, which will read the value correctly on all
arches, whether it's 32b or 64b.
Fixes: 48ef50fa86 ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1c1df1661b89238caf5beefb84a10ebfd56c66ea.1756459839.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 2677010e77 ("Add support to set NAPI threaded for individual
NAPI") introduced threaded NAPI configuration per individual NAPI
instance, however obsolete description that threaded NAPI is per device
has remained.
Remove the old description and clarify that only NAPI instances running
in threaded mode spawn kernel threads by changing "Each NAPI instance"
to "Each threaded NAPI instance".
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250829064857.51503-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The icmp_ndo_send function was originally introduced to ensure proper
rate limiting when icmp_send is called by a network device driver,
where the packet's source address may have already been transformed
by SNAT.
However, the original implementation only considers the
IP_CT_DIR_ORIGINAL direction for SNAT and always replaced the packet's
source address with that of the original-direction tuple. This causes
two problems:
1. For SNAT:
Reply-direction packets were incorrectly translated using the source
address of the CT original direction, even though no translation is
required.
2. For DNAT:
Reply-direction packets were not handled at all. In DNAT, the original
direction's destination is translated. Therefore, in the reply
direction the source address must be set to the reply-direction
source, so rate limiting works as intended.
Fix this by using the connection direction to select the correct tuple
for source address translation, and adjust the pre-checks to handle
reply-direction packets in case of DNAT.
Additionally, wrap the `ct->status` access in READ_ONCE(). This avoids
possible KCSAN reports about concurrent updates to `ct->status`.
Fixes: 0b41713b60 ("icmp: introduce helper for nat'd source address in network device context")
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- vhci: Prevent use-after-free by removing debugfs files early
- L2CAP: Fix use-after-free in l2cap_sock_cleanup_listen()
* tag 'for-net-2025-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen()
Bluetooth: vhci: Prevent use-after-free by removing debugfs files early
====================
Link: https://patch.msgid.link/20250829191210.1982163-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
batadv_nc_skb_decode_packet() trusts coded_len and checks only against
skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing
payload headroom, and the source skb length is not verified, allowing an
out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination
and source sk_buffs before XORing.
Fixes: 2df5278b02 ("batman-adv: network coding - receive coded packets and decode them")
Cc: stable@vger.kernel.org
Reported-by: Stanislav Fort <disclosure@aisle.com>
Signed-off-by: Stanislav Fort <stanislav.fort@aisle.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Stefan Wahren says:
====================
microchip: lan865x: Fix probing issues
Recently I setup a customer i.MX93 board which contains a LAN8651 chip.
During this process I discovered some probing related issues.
====================
Link: https://patch.msgid.link/20250827115341.34608-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsp_hwec_enable() allocates dup pointer by kstrdup(arg),
but then it updates dup variable by strsep(&dup, ",").
As a result when it calls kfree(dup), the dup variable may be
a modified pointer that no longer points to the original allocated
memory, causing a memory leak.
The issue is the same pattern as fixed in commit c6a502c229
("mISDN: Fix memory leak in dsp_pipeline_build()").
Fixes: 9a43816182 ("mISDN: Remove VLAs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250828081457.36061-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ptp_ocp_detach() only shuts down the watchdog timer if it is
pending. However, if the timer handler is already running, the
timer_delete_sync() is not called. This leads to race conditions
where the devlink that contains the ptp_ocp is deallocated while
the timer handler is still accessing it, resulting in use-after-free
bugs. The following details one of the race scenarios.
(thread 1) | (thread 2)
ptp_ocp_remove() |
ptp_ocp_detach() | ptp_ocp_watchdog()
if (timer_pending(&bp->watchdog))| bp = timer_container_of()
timer_delete_sync() |
|
devlink_free(devlink) //free |
| bp-> //use
Resolve this by unconditionally calling timer_delete_sync() to ensure
the timer is reliably deactivated, preventing any access after free.
Fixes: 773bda9649 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250828082949.28189-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
netfilter updates for net
1) Remove bogus WARN_ON in br_netfilter that came in 6.8.
This is now more prominent due to
commit 2d72afb340 ("netfilter: nf_conntrack: fix crash due to
removal of uninitialised entry"). From Wang Liang.
2) Better error reporting when a helper module clashes with
an existing helper name: -EEXIST makes modprobe believe that
the module is already loaded, so error message is elided.
From Phil Sutter.
* tag 'nf-25-08-27' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: helper: Replace -EEXIST by -EBUSY
netfilter: br_netfilter: do not check confirmed bit in br_nf_local_in() after confirm
====================
Link: https://patch.msgid.link/20250827133900.16552-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub says:
nft_flowtable.sh is one of the most flake-atious test for netdev CI currently :(
The root cause is two-fold:
1. the failing part of the test is supposed to make sure that ip
fragments are forwarded for offloaded flows.
(flowtable has to pass them to classic forward path).
path mtu discovery for these subtests is disabled.
2. nft_flowtable.sh has two passes. One with fixed mtus/file size and
one where link mtus and file sizes are random.
The CI failures all have same pattern:
re-run with random mtus and file size: -o 27663 -l 4117 -r 10089 -s 54384840
[..]
PASS: dscp_egress: dscp packet counters match
FAIL: file mismatch for ns1 -> ns2
In some cases this error triggers a bit ealier, sometimes in a later
subtest:
re-run with random mtus and file size: -o 20201 -l 4555 -r 12657 -s 9405856
[..]
PASS: dscp_egress: dscp packet counters match
PASS: dscp_fwd: dscp packet counters match
2025/08/17 20:37:52 socat[18954] E write(7, 0x560716b96000, 8192): Broken pipe
FAIL: file mismatch for ns1 -> ns2
-rw------- 1 root root 9405856 Aug 17 20:36 /tmp/tmp.2n63vlTrQe
But all logs I saw show same scenario:
1. Failing tests have pmtu discovery off (i.e., ip fragmentation)
2. The test file is much larger than first-pass default (2M Byte)
3. peers have much larger MTUs compared to the 'network'.
These errors are very reproducible when re-running the test with
the same commandline arguments.
The timeout became much more prominent with
1d2fbaad7c ("tcp: stronger sk_rcvbuf checks"): reassembled packets
typically have a skb->truesize more than double the skb length.
As that commit is intentional and pmtud-off with
large-tcp-packets-as-fragments is not normal adjust the test to use a
smaller file for the pmtu-off subtests.
While at it, add more information to pass/fail messages and
also run the dscp alteration subtest with pmtu discovery enabled.
Link: https://netdev.bots.linux.dev/contest.html?test=nft-flowtable-sh
Fixes: f84ab63490 ("selftests: netfilter: nft_flowtable.sh: re-run with random mtu sizes")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20250822071330.4168f0db@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250828214918.3385-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Some fixes for the current cycle:
- mt76: MLO regressions, offchannel handling, list corruption
- mac80211: scan allocation size, no 40 MHz EHT, signed type
- rt2x00: (randconfig) build
- cfg80211: use-after-free
- iwlwifi: config/old devices, BIOS compatibility
- mwifiex: vmalloc content leak
* tag 'wireless-2025-08-28' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (29 commits)
wifi: iwlwifi: cfg: add back more lost PCI IDs
wifi: iwlwifi: fix byte count table for old devices
wifi: iwlwifi: cfg: restore some 1000 series configs
wifi: mwifiex: Initialize the chan_stats array to zero
wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz
wifi: iwlwifi: uefi: check DSM item validity
wifi: iwlwifi: acpi: check DSM func validity
wifi: iwlwifi: if scratch is ~0U, consider it a failure
wifi: mt76: fix linked list corruption
wifi: mt76: free pending offchannel tx frames on wcid cleanup
wifi: mt76: mt7915: fix list corruption after hardware restart
wifi: mt76: mt7996: add missing check for rx wcid entries
wifi: mt76: do not add non-sta wcid entries to the poll list
wifi: mt76: mt7996: fix crash on some tx status reports
wifi: mt76: mt7996: use the correct vif link for scanning/roc
wifi: mt76: mt7996: disable beacons when going offchannel
wifi: mt76: prevent non-offchannel mgmt tx during scan/roc
wifi: mt76: mt7925: skip EHT MLD TLV on non-MLD and pass conn_state for sta_cmd
wifi: mt76: mt7925u: use connac3 tx aggr check in tx complete
wifi: mt76: mt7925: fix the wrong bss cleanup for SAP
...
====================
Link: https://patch.msgid.link/20250828122654.1167754-8-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
