Regression Description:
Depending on the options specified for the GRE tunnel device, small
packets may be dropped. This occurs because the pskb_network_may_pull
function fails due to the packet's insufficient length.
For example, if only the okey option is specified for the tunnel device,
original (before encapsulation) packets smaller than 28 bytes (including
the IPv4 header) will be dropped. This happens because the required
length is calculated relative to the network header, not the skb->head.
Here is how the required length is computed and checked:
* The pull_len variable is set to 28 bytes, consisting of:
* IPv4 header: 20 bytes
* GRE header with Key field: 8 bytes
* The pskb_network_may_pull function adds the network offset, shifting
the checkable space further to the beginning of the network header and
extending it to the beginning of the packet. As a result, the end of
the checkable space occurs beyond the actual end of the packet.
Instead of ensuring that 28 bytes are present in skb->head, the function
is requesting these 28 bytes starting from the network header. For small
packets, this requested length exceeds the actual packet size, causing
the check to fail and the packets to be dropped.
This issue affects both locally originated and forwarded packets in
DMVPN-like setups.
How to reproduce (for local originated packets):
ip link add dev gre1 type gre ikey 1.9.8.4 okey 1.9.8.4 \
local <your-ip> remote 0.0.0.0
ip link set mtu 1400 dev gre1
ip link set up dev gre1
ip address add 192.168.13.1/24 dev gre1
ip neighbor add 192.168.13.2 lladdr <remote-ip> dev gre1
ping -s 1374 -c 10 192.168.13.2
tcpdump -vni gre1
tcpdump -vni <your-ext-iface> 'ip proto 47'
ip -s -s -d link show dev gre1
Solution:
Use the pskb_may_pull function instead the pskb_network_may_pull.
Fixes: 80d875cfc9 ("ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()")
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240924235158.106062-1-littlesmilingcloud@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Increase the timeout for checking the busy bit of the VLAN Tag register
from 10µs to 500ms. This change is necessary to accommodate scenarios
where Energy Efficient Ethernet (EEE) is enabled.
Overnight testing revealed that when EEE is active, the busy bit can
remain set for up to approximately 300ms. The new 500ms timeout provides
a safety margin.
Fixes: ed64639bc1 ("net: stmmac: Add support for VLAN Rx filtering")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20240924205424.573913-1-shenwei.wang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet says:
====================
net: two fixes for qdisc_pkt_len_init()
Inspired by one syzbot report.
At least one qdisc (fq_codel) depends on qdisc_skb_cb(skb)->pkt_len
having a sane value (not zero)
With the help of af_packet, syzbot was able to fool qdisc_pkt_len_init()
to precisely set qdisc_skb_cb(skb)->pkt_len to zero.
First patch fixes this issue.
Second one (a separate one to help future bisections) adds
more sanity check to SKB_GSO_DODGY users.
====================
Link: https://patch.msgid.link/20240924150257.1059524-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
One path takes care of SKB_GSO_DODGY, assuming
skb->len is bigger than hdr_len.
virtio_net_hdr_to_skb() does not fully dissect TCP headers,
it only make sure it is at least 20 bytes.
It is possible for an user to provide a malicious 'GSO' packet,
total length of 80 bytes.
- 20 bytes of IPv4 header
- 60 bytes TCP header
- a small gso_size like 8
virtio_net_hdr_to_skb() would declare this packet as a normal
GSO packet, because it would see 40 bytes of payload,
bigger than gso_size.
We need to make detect this case to not underflow
qdisc_skb_cb(skb)->pkt_len.
Fixes: 1def9238d4 ("net_sched: more precise pkt_len computation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The number of register fields cannot be assumed to be ALE_FIELDS_MAX
as some platforms can have lesser fields.
Solve this by embedding the actual number of fields available
in platform data and use that instead of ALE_FIELDS_MAX.
Gets rid of the below warning on BeagleBone Black
[ 1.007735] WARNING: CPU: 0 PID: 33 at drivers/base/regmap/regmap.c:1208 regmap_field_init+0x88/0x9c
[ 1.007802] invalid empty mask defined
[ 1.007812] Modules linked in:
[ 1.007842] CPU: 0 UID: 0 PID: 33 Comm: kworker/u4:3 Not tainted 6.11.0-01459-g508403ab7b74-dirty #840
[ 1.007867] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 1.007890] Workqueue: events_unbound deferred_probe_work_func
[ 1.007935] Call trace:
[ 1.007957] unwind_backtrace from show_stack+0x10/0x14
[ 1.007999] show_stack from dump_stack_lvl+0x50/0x64
[ 1.008033] dump_stack_lvl from __warn+0x70/0x124
[ 1.008077] __warn from warn_slowpath_fmt+0x194/0x1a8
[ 1.008113] warn_slowpath_fmt from regmap_field_init+0x88/0x9c
[ 1.008154] regmap_field_init from devm_regmap_field_alloc+0x48/0x64
[ 1.008193] devm_regmap_field_alloc from cpsw_ale_create+0xfc/0x320
[ 1.008251] cpsw_ale_create from cpsw_init_common+0x214/0x354
[ 1.008286] cpsw_init_common from cpsw_probe+0x4ac/0xb88
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/CAMuHMdUf-tKRDzkz2_m8qdFTFutefddU0NTratVrEjRTzA3yQQ@mail.gmail.com/
Fixes: 11cbcfeaa7 ("net: ethernet: ti: cpsw_ale: use regfields for number of Entries and Policers")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240924-am65-cpsw-multi-rx-fix-v1-1-0ca3fa9a1398@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When applying padding, the buffer is not zeroed, which results in memory
disclosure. The mentioned data is observed on the wire. This patch uses
skb_put_padto() to pad Ethernet frames properly. The mentioned function
zeroes the expanded buffer.
In case the packet cannot be padded it is silently dropped. Statistics
are also not incremented. This driver does not support statistics in the
old 32-bit format or the new 64-bit format. These will be added in the
future. In its current form, the patch should be easily backported to
stable versions.
Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets
in hardware, so software padding must be applied.
Fixes: 504d4721ee ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240923214949.231511-2-olek2@wp.pl
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 24ab059d2e ("net: check dev->gso_max_size in gso_features_check()")
added a dev->gso_max_size test to gso_features_check() in order to fall
back to GSO when needed.
This was added as it was noticed that some drivers could misbehave if TSO
packets get too big. However, the check doesn't respect dev->gso_ipv4_max_size
limit. For instance, a device could be configured with BIG TCP for IPv4,
but not IPv6.
Therefore, add a netif_get_gso_max_size() equivalent to netif_get_gro_max_size()
and use the helper to respect both limits before falling back to GSO engine.
Fixes: 24ab059d2e ("net: check dev->gso_max_size in gso_features_check()")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240923212242.15669-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alexander Sverdlin presents 2 problems during shutdown with the
lan9303 driver. One is specific to lan9303 and the other just happens
to reproduce there.
The first problem is that lan9303 is unique among DSA drivers in that it
calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown,
not remove):
phy_state_machine()
-> ...
-> dsa_user_phy_read()
-> ds->ops->phy_read()
-> lan9303_phy_read()
-> chip->ops->phy_read()
-> lan9303_mdio_phy_read()
-> dev_get_drvdata()
But we never stop the phy_state_machine(), so it may continue to run
after dsa_switch_shutdown(). Our common pattern in all DSA drivers is
to set drvdata to NULL to suppress the remove() method that may come
afterwards. But in this case it will result in an NPD.
The second problem is that the way in which we set
dp->conduit->dsa_ptr = NULL; is concurrent with receive packet
processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL,
but afterwards, rather than continuing to use that non-NULL value,
dev->dsa_ptr is dereferenced again and again without NULL checks:
dsa_conduit_find_user() and many other places. In between dereferences,
there is no locking to ensure that what was valid once continues to be
valid.
Both problems have the common aspect that closing the conduit interface
solves them.
In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN
event in dsa_user_netdevice_event() which closes user ports as well.
dsa_port_disable_rt() calls phylink_stop(), which synchronously stops
the phylink state machine, and ds->ops->phy_read() will thus no longer
call into the driver after this point.
In the second case, dev_close(conduit) should do this, as per
Documentation/networking/driver.rst:
| Quiescence
| ----------
|
| After the ndo_stop routine has been called, the hardware must
| not receive or transmit any data. All in flight packets must
| be aborted. If necessary, poll or wait for completion of
| any reset commands.
So it should be sufficient to ensure that later, when we zeroize
conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call
on this conduit.
The addition of the netif_device_detach() function is to ensure that
ioctls, rtnetlinks and ethtool requests on the user ports no longer
propagate down to the driver - we're no longer prepared to handle them.
The race condition actually did not exist when commit 0650bf52b3
("net: dsa: be compatible with masters which unregister on shutdown")
first introduced dsa_switch_shutdown(). It was created later, when we
stopped unregistering the user interfaces from a bad spot, and we just
replaced that sequence with a racy zeroization of conduit->dsa_ptr
(one which doesn't ensure that the interfaces aren't up).
Reported-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Closes: https://lore.kernel.org/netdev/2d2e3bba17203c14a5ffdabc174e3b6bbb9ad438.camel@siemens.com/
Closes: https://lore.kernel.org/netdev/c1bf4de54e829111e0e4a70e7bd1cf523c9550ff.camel@siemens.com/
Fixes: ee534378f0 ("net: dsa: fix panic when DSA master device unbinds on shutdown")
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20240913203549.3081071-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time.
But the pm_runtime_disable() and pm_runtime_dont_use_autosuspend()
is missing in the error path for bam_dmux_probe(). So add it.
Found by code review. Compile-tested only.
Fixes: 21a0ffd9b3 ("net: wwan: Add Qualcomm BAM-DMUX WWAN network driver")
Suggested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
It looks like that most people are still traveling: both the ML volume
and the processing capacity are low.
Previous releases - regressions:
- netfilter:
- nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
- nf_tables: keep deleted flowtable hooks until after RCU
- tcp: check skb is non-NULL in tcp_rto_delta_us()
- phy: aquantia: fix -ETIMEDOUT PHY probe failure when firmware not
present
- eth: virtio_net: fix mismatched buf address when unmapping for
small packets
- eth: stmmac: fix zero-division error when disabling tc cbs
- eth: bonding: fix unnecessary warnings and logs from
bond_xdp_get_xmit_slave()
Previous releases - always broken:
- netfilter:
- fix clash resolution for bidirectional flows
- fix allocation with no memcg accounting
- eth: r8169: add tally counter fields added with RTL8125
- eth: ravb: fix rx and tx frame size limit"
* tag 'net-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
selftests: netfilter: Avoid hanging ipvs.sh
kselftest: add test for nfqueue induced conntrack race
netfilter: nfnetlink_queue: remove old clash resolution logic
netfilter: nf_tables: missing objects with no memcg accounting
netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path
netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS
netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n
netfilter: nf_tables: Keep deleted flowtable hooks until after RCU
docs: tproxy: ignore non-transparent sockets in iptables
netfilter: ctnetlink: Guard possible unused functions
selftests: netfilter: nft_tproxy.sh: add tcp tests
selftests: netfilter: add reverse-clash resolution test case
netfilter: conntrack: add clash resolution for reverse collisions
netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash
selftests/net: packetdrill: increase timing tolerance in debug mode
usbnet: fix cyclical race on disconnect with work queue
net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled
virtio_net: Fix mismatched buf address when unmapping for small packets
bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave()
r8169: add missing MODULE_FIRMWARE entry for RTL8126A rev.b
...
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver cleanups and removals for
6.12-rc1.
Nothing exciting here, just slow, constant, forward progress in
removing code and cleaning up some old drivers, along with removing
one of them that was not being used anymore at all. In discussions
with some developers this past week, even more deletions will be
happening for the next major merge window, as we seems to have code
here that obviously no one is using anymore.
Along with the normal cleanups is the good vme_user code forward
progress, the one major bright spot in the staging subsystem for code
that people rely on, and is getting good development behind it.
Hopefully it can graduate out of staging "soon".
All of these changes have been in linux-next for a long time with no
reported problems"
* tag 'staging-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (141 commits)
staging: vt6655: Rename variable apTD1Rings
staging: vt6655: Rename variable apTD0Rings
staging: rtl8723bs: remove unused 'poll_cnt' from rtw_set_rpwm()
staging: rtl8723bs: remove unused cnt from recv_func()
staging: rtl8723bs: remove unused efuseValue from efuse_OneByteWrite()
staging: rtl8712: remove unused drvinfo_sz from update_recvframe_attrib
staging: vt6655: mac.h: Fix possible precedence issue in macros
staging: rtl8723bs: include: Remove spaces before tabs in rtw_security.h
staging: rtl8723bs: include: Fix trailing */ position in rtw_security.h
staging: rtl8723bs: include: Fix indent for else block struct in rtw_security.h
staging: rtl8723bs: include: Fix indent for struct _byte_ in rtw_security.h
staging: rtl8723bs: include: Fix use of tabs for indent in rtw_security.h
staging: rtl8723bs: include: Fix indent for switch block in rtw_security.h
staging: rtl8723bs: include: Fix indent for switch case in rtw_security.h
staging: rtl8723bs: include: Fix open brace position in rtw_security.h
staging: nvec: Use IRQF_NO_AUTOEN flag in request_irq()
staging: rtl8723bs: Remove unused file rtw_rf.c
staging: rtl8723bs: Remove unused function rtw_ch2freq
staging: rtl8723bs: Remove unused files rtw_debug.c and rtw_debug.h
staging: rtl8723bs: Remove unused function dump_4_regs
...
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup
of the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART
engine that that chip seems to have. Hopefully it's in a better
state now, but hardware designers still seem to come up with more
ways to make broken UARTS 40+ years after this all should have
finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems"
* tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
tty: serial: samsung: Fix serial rx on Apple A7-A9
tty: serial: samsung: Fix A7-A11 serial earlycon SError
tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_*
tty: rp2: Fix reset with non forgiving PCIe host bridges
serial: 8250_aspeed_vuart: Enable module autoloading
serial: qcom-geni: fix polled console corruption
serial: qcom-geni: disable interrupts during console writes
serial: qcom-geni: fix console corruption
serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
serial: qcom-geni: fix false console tx restart
serial: qcom-geni: fix fifo polling timeout
tty: hvc: convert comma to semicolon
mxser: convert comma to semicolon
serial: 8250_bcm2835aux: Fix clock imbalance in PM resume
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK
serial: xilinx_uartps: Make cdns_rs485_supported static
...
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.12-rc1.
Nothing "major" in here, except for a new 9p network gadget that has
been worked on for a long time (all of the needed acks are here)
Other than that, it's the usual set of:
- Thunderbolt / USB4 driver updates and additions for new hardware
- dwc3 driver updates and new features added
- xhci driver updates
- typec driver updates
- USB gadget updates and api additions to make some gadgets more
configurable by userspace
- dwc2 driver updates
- usb phy driver updates
- usbip feature additions
- other minor USB driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
sub: cdns3: Use predefined PCI vendor ID constant
sub: cdns2: Use predefined PCI vendor ID constant
USB: misc: yurex: fix race between read and write
USB: misc: cypress_cy7c63: check for short transfer
USB: appledisplay: close race between probe and completion handler
USB: class: CDC-ACM: fix race between get_serial and set_serial
usb: r8a66597-hcd: make read-only const arrays static
usb: typec: ucsi: Fix busy loop on ASUS VivoBooks
usb: dwc3: rtk: Clean up error code in __get_dwc3_maximum_speed()
usb: storage: ene_ub6250: Fix right shift warnings
usb: roles: Improve the fix for a false positive recursive locking complaint
locking/mutex: Introduce mutex_init_with_key()
locking/mutex: Define mutex_init() once
net/9p/usbg: fix CONFIG_USB_GADGET dependency
usb: xhci: fix loss of data on Cadence xHC
usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host
usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep
usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode
usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support
...
Pull HID fix from Jiri Kosina:
"A revert of Device Tree binding for Goodix SPI HID driver (while
keeping ACPI still available), as it conflicted with already existing
binding and the original submitter didn't respond in time with a fix.
We will be looking into ways how to reintroduce it properly (we have
to agree on a way how to handle cases where vendor uses the very same
product ID for I2C and SPI parts, leading to this kind conflict). But
before that is settled, let's revert the to unbreak everybody else
(Krzysztof Kozlowski)"
* tag 'hid-for-linus-2024092601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
dt-bindings: input: Revert "dt-bindings: input: Goodix SPI HID Touchscreen"
HID: hid-goodix: drop unsupported and undocumented DT part
Pull smb client fixes from Steve French:
"Most are from the recent SMB3.1.1 test event, and also an important
netfs fix for a cifs mtime write regression
- fix mode reported by stat of readonly directories and files
- DFS (global namespace) related fixes
- fixes for special file support via reparse points
- mount improvement and reconnect fix
- fix for noisy log message on umount
- two netfs related fixes, one fixing a recent regression, and add
new write tracepoint"
* tag 'v6.12-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
netfs, cifs: Fix mtime/ctime update for mmapped writes
cifs: update internal version number
smb: client: print failed session logoffs with FYI
cifs: Fix reversion of the iter in cifs_readv_receive().
smb3: fix incorrect mode displayed for read-only files
smb: client: fix parsing of device numbers
smb: client: set correct device number on nfs reparse points
smb: client: propagate error from cifs_construct_tcon()
smb: client: fix DFS failover in multiuser mounts
cifs: Make the write_{enter,done,err} tracepoints display netfs info
smb: client: fix DFS interlink failover
smb: client: improve purging of cached referrals
smb: client: avoid unnecessary reconnects when refreshing referrals
Pull probes updates from Masami Hiramatsu:
- uprobes: make trace_uprobe->nhit counter a per-CPU one
This makes uprobe event's hit counter per-CPU for improving
scalability on multi-core environment
- kprobes: Remove obsoleted declaration for init_test_probes
Remove unused init_test_probes() from header
- Raw tracepoint probe supports raw tracepoint events on modules:
- add a function for iterating over all tracepoints in all modules
- add a function for iterating over tracepoints in a module
- support raw tracepoint events on modules
- support raw tracepoints on future loaded modules
- add a test for tracepoint events on modules"
* tag 'probes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
sefltests/tracing: Add a test for tracepoint events on modules
tracing/fprobe: Support raw tracepoints on future loaded modules
tracing/fprobe: Support raw tracepoint events on modules
tracepoint: Support iterating tracepoints in a loading module
tracepoint: Support iterating over tracepoints on modules
kprobes: Remove obsoleted declaration for init_test_probes
uprobes: turn trace_uprobe's nhit counter to be per-CPU one
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-balloon supports new stats
- vdpa supports setting mac address
- vdpa/mlx5 suspend/resume as well as MKEY ops are now faster
- virtio_fs supports new sysfs entries for queue info
- virtio/vsock performance has been improved
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vsock/virtio: avoid queuing packets when intermediate queue is empty
vsock/virtio: refactor virtio_transport_send_pkt_work
fw_cfg: Constify struct kobj_type
vdpa/mlx5: Postpone MR deletion
vdpa/mlx5: Introduce init/destroy for MR resources
vdpa/mlx5: Rename mr_mtx -> lock
vdpa/mlx5: Extract mr members in own resource struct
vdpa/mlx5: Rename function
vdpa/mlx5: Delete direct MKEYs in parallel
vdpa/mlx5: Create direct MKEYs in parallel
MAINTAINERS: add virtio-vsock driver in the VIRTIO CORE section
virtio_fs: add sysfs entries for queue information
virtio_fs: introduce virtio_fs_put_locked helper
vdpa: Remove unused declarations
vdpa/mlx5: Parallelize VQ suspend/resume for CVQ MQ command
vdpa/mlx5: Small improvement for change_num_qps()
vdpa/mlx5: Keep notifiers during suspend but ignore
vdpa/mlx5: Parallelize device resume
vdpa/mlx5: Parallelize device suspend
vdpa/mlx5: Use async API for vq modify commands
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
v2: with kdoc fixes per Paolo Abeni.
The following patchset contains Netfilter fixes for net:
Patch #1 and #2 handle an esoteric scenario: Given two tasks sending UDP
packets to one another, two packets of the same flow in each direction
handled by different CPUs that result in two conntrack objects in NEW
state, where reply packet loses race. Then, patch #3 adds a testcase for
this scenario. Series from Florian Westphal.
1) NAT engine can falsely detect a port collision if it happens to pick
up a reply packet as NEW rather than ESTABLISHED. Add extra code to
detect this and suppress port reallocation in this case.
2) To complete the clash resolution in the reply direction, extend conntrack
logic to detect clashing conntrack in the reply direction to existing entry.
3) Adds a test case.
Then, an assorted list of fixes follow:
4) Add a selftest for tproxy, from Antonio Ojea.
5) Guard ctnetlink_*_size() functions under
#if defined(CONFIG_NETFILTER_NETLINK_GLUE_CT) || defined(CONFIG_NF_CONNTRACK_EVENTS)
From Andy Shevchenko.
6) Use -m socket --transparent in iptables tproxy documentation.
From XIE Zhibang.
7) Call kfree_rcu() when releasing flowtable hooks to address race with
netlink dump path, from Phil Sutter.
8) Fix compilation warning in nf_reject with CONFIG_BRIDGE_NETFILTER=n.
From Simon Horman.
9) Guard ctnetlink_label_size() under CONFIG_NF_CONNTRACK_EVENTS which
is its only user, to address a compilation warning. From Simon Horman.
10) Use rcu-protected list iteration over basechain hooks from netlink
dump path.
11) Fix memcg for nf_tables, use GFP_KERNEL_ACCOUNT is not complete.
12) Remove old nfqueue conntrack clash resolution. Instead trying to
use same destination address consistently which requires double DNAT,
use the existing clash resolution which allows clashing packets
go through with different destination. Antonio Ojea originally
reported an issue from the postrouting chain, I proposed a fix:
https://lore.kernel.org/netfilter-devel/ZuwSwAqKgCB2a51-@calendula/T/
which he reported it did not work for him.
13) Adds a selftest for patch 12.
14) Fixes ipvs.sh selftest.
netfilter pull request 24-09-26
* tag 'nf-24-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Avoid hanging ipvs.sh
kselftest: add test for nfqueue induced conntrack race
netfilter: nfnetlink_queue: remove old clash resolution logic
netfilter: nf_tables: missing objects with no memcg accounting
netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path
netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS
netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n
netfilter: nf_tables: Keep deleted flowtable hooks until after RCU
docs: tproxy: ignore non-transparent sockets in iptables
netfilter: ctnetlink: Guard possible unused functions
selftests: netfilter: nft_tproxy.sh: add tcp tests
selftests: netfilter: add reverse-clash resolution test case
netfilter: conntrack: add clash resolution for reverse collisions
netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash
====================
Link: https://patch.msgid.link/20240926110717.102194-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the client can't reach the server, the latter remains listening
forever. Kill it after 5s of waiting.
Fixes: 867d219079 ("selftests: netfilter: add ipvs test script")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The netfilter race happens when two packets with the same tuple are DNATed
and enqueued with nfqueue in the postrouting hook.
Once one of the packet is reinjected it may be DNATed again to a different
destination, but the conntrack entry remains the same and the return packet
was dropped.
Based on earlier patch from Antonio Ojea.
Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1766
Co-developed-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For historical reasons there are two clash resolution spots in
netfilter, one in nfnetlink_queue and one in conntrack core.
nfnetlink_queue one was added first: If a colliding entry is found, NAT
NAT transformation is reversed by calling nat engine again with altered
tuple.
See commit 368982cd7d ("netfilter: nfnetlink_queue: resolve clash for
unconfirmed conntracks") for details.
One problem is that nf_reroute() won't take an action if the queueing
doesn't occur in the OUTPUT hook, i.e. when queueing in forward or
postrouting, packet will be sent via the wrong path.
Another problem is that the scenario addressed (2nd UDP packet sent with
identical addresses while first packet is still being processed) can also
occur without any nfqueue involvement due to threaded resolvers doing
A and AAAA requests back-to-back.
This lead us to add clash resolution logic to the conntrack core, see
commit 6a757c07e5 ("netfilter: conntrack: allow insertion of clashing
entries"). Instead of fixing the nfqueue based logic, lets remove it
and let conntrack core handle this instead.
Retain the ->update hook for sake of nfqueue based conntrack helpers.
We could axe this hook completely but we'd have to split confirm and
helper logic again, see commit ee04805ff5 ("netfilter: conntrack: make
conntrack userspace helpers work again").
This SHOULD NOT be backported to kernels earlier than v5.6; they lack
adequate clash resolution handling.
Patch was originally written by Pablo Neira Ayuso.
Reported-by: Antonio Ojea <aojea@google.com>
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1766
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Several ruleset objects are still not using GFP_KERNEL_ACCOUNT for
memory accounting, update them. This includes:
- catchall elements
- compat match large info area
- log prefix
- meta secctx
- numgen counters
- pipapo set backend datastructure
- tunnel private objects
Fixes: 33758c8914 ("memcg: enable accounting for nft objects")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Lockless iteration over hook list is possible from netlink dump path,
use rcu variant to iterate over the hook list as is done with flowtable
hooks.
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only provide ctnetlink_label_size when it is used,
which is when CONFIG_NF_CONNTRACK_EVENTS is configured.
Flagged by clang-18 W=1 builds as:
.../nf_conntrack_netlink.c:385:19: warning: unused function 'ctnetlink_label_size' [-Wunused-function]
385 | static inline int ctnetlink_label_size(const struct nf_conn *ct)
| ^~~~~~~~~~~~~~~~~~~~
The condition on CONFIG_NF_CONNTRACK_LABELS being removed by
this patch guards compilation of non-trivial implementations
of ctnetlink_dump_labels() and ctnetlink_label_size().
However, this is not necessary as each of these functions
will always return 0 if CONFIG_NF_CONNTRACK_LABELS is not defined
as each function starts with the equivalent of:
struct nf_conn_labels *labels = nf_ct_labels_find(ct);
if (!labels)
return 0;
And nf_ct_labels_find always returns NULL if CONFIG_NF_CONNTRACK_LABELS
is not enabled. So I believe that the compiler optimises the code away
in such cases anyway.
Found by inspection.
Compile tested only.
Originally splitted in two patches, Pablo Neira Ayuso collapsed them and
added Fixes: tag.
Fixes: 0ceabd8387 ("netfilter: ctnetlink: deliver labels to userspace")
Link: https://lore.kernel.org/netfilter-devel/20240909151712.GZ2097826@kernel.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If CONFIG_BRIDGE_NETFILTER is not enabled, which is the case for x86_64
defconfig, then building nf_reject_ipv4.c and nf_reject_ipv6.c with W=1
using gcc-14 results in the following warnings, which are treated as
errors:
net/ipv4/netfilter/nf_reject_ipv4.c: In function 'nf_send_reset':
net/ipv4/netfilter/nf_reject_ipv4.c:243:23: error: variable 'niph' set but not used [-Werror=unused-but-set-variable]
243 | struct iphdr *niph;
| ^~~~
cc1: all warnings being treated as errors
net/ipv6/netfilter/nf_reject_ipv6.c: In function 'nf_send_reset6':
net/ipv6/netfilter/nf_reject_ipv6.c:286:25: error: variable 'ip6h' set but not used [-Werror=unused-but-set-variable]
286 | struct ipv6hdr *ip6h;
| ^~~~
cc1: all warnings being treated as errors
Address this by reducing the scope of these local variables to where
they are used, which is code only compiled when CONFIG_BRIDGE_NETFILTER
enabled.
Compile tested and run through netfilter selftests.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/netfilter-devel/20240906145513.567781-1-andriy.shevchenko@linux.intel.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Documentation of list_del_rcu() warns callers to not immediately free
the deleted list item. While it seems not necessary to use the
RCU-variant of list_del() here in the first place, doing so seems to
require calling kfree_rcu() on the deleted item as well.
Fixes: 3f0465a9ef ("netfilter: nf_tables: dynamically allocate hooks per net_device in flowtables")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The iptables example was added in commit d2f26037a3 (netfilter: Add
documentation for tproxy, 2008-10-08), but xt_socket 'transparent'
option was added in commit a31e1ffd22 (netfilter: xt_socket: added new
revision of the 'socket' match supporting flags, 2009-06-09).
Now add the 'transparent' option to the iptables example to ignore
non-transparent sockets, which is also consistent with the nft example.
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Some of the functions may be unused (CONFIG_NETFILTER_NETLINK_GLUE_CT=n
and CONFIG_NF_CONNTRACK_EVENTS=n), it prevents kernel builds with clang,
`make W=1` and CONFIG_WERROR=y:
net/netfilter/nf_conntrack_netlink.c:657:22: error: unused function 'ctnetlink_acct_size' [-Werror,-Wunused-function]
657 | static inline size_t ctnetlink_acct_size(const struct nf_conn *ct)
| ^~~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:667:19: error: unused function 'ctnetlink_secctx_size' [-Werror,-Wunused-function]
667 | static inline int ctnetlink_secctx_size(const struct nf_conn *ct)
| ^~~~~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:683:22: error: unused function 'ctnetlink_timestamp_size' [-Werror,-Wunused-function]
683 | static inline size_t ctnetlink_timestamp_size(const struct nf_conn *ct)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by guarding possible unused functions with ifdeffery.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The TPROXY functionality is widely used, however, there are only mptcp
selftests covering this feature.
The selftests represent the most common scenarios and can also be used
as selfdocumentation of the feature.
UDP and TCP testcases are split in different files because of the
different nature of the protocols, specially due to the challenges that
present to reliable test UDP due to the connectionless nature of the
protocol. UDP only covers the scenarios involving the prerouting hook.
The UDP tests are signfinicantly slower than the TCP ones, hence they
use a larger timeout, it takes 20 seconds to run the full UDP suite
on a 48 vCPU Intel(R) Xeon(R) CPU @2.60GHz.
Signed-off-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add test program that is sending UDP packets in both directions
and check that packets arrive without source port modification.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Given existing entry:
ORIGIN: a:b -> c:d
REPLY: c:d -> a:b
And colliding entry:
ORIGIN: c:d -> a:b
REPLY: a:b -> c:d
The colliding ct (and the associated skb) get dropped on insert.
Permit this by checking if the colliding entry matches the reply
direction.
Happens when both ends send packets at same time, both requests are picked
up as NEW, rather than NEW for the 'first' and 'ESTABLISHED' for the
second packet.
This is an esoteric condition, as ruleset must permit NEW connections
in either direction and both peers must already have a bidirectional
traffic flow at the time conntrack gets enabled.
Allow the 'reverse' skb to pass and assign the existing (clashing)
entry.
While at it, also drop the extra 'dying' check, this is already
tested earlier by the calling function.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A conntrack entry can be inserted to the connection tracking table if there
is no existing entry with an identical tuple in either direction.
Example:
INITIATOR -> NAT/PAT -> RESPONDER
Initiator passes through NAT/PAT ("us") and SNAT is done (saddr rewrite).
Then, later, NAT/PAT machine itself also wants to connect to RESPONDER.
This will not work if the SNAT done earlier has same IP:PORT source pair.
Conntrack table has:
ORIGINAL: $IP_INITATOR:$SPORT -> $IP_RESPONDER:$DPORT
REPLY: $IP_RESPONDER:$DPORT -> $IP_NAT:$SPORT
and new locally originating connection wants:
ORIGINAL: $IP_NAT:$SPORT -> $IP_RESPONDER:$DPORT
REPLY: $IP_RESPONDER:$DPORT -> $IP_NAT:$SPORT
This is handled by the NAT engine which will do a source port reallocation
for the locally originating connection that is colliding with an existing
tuple by attempting a source port rewrite.
This is done even if this new connection attempt did not go through a
masquerade/snat rule.
There is a rare race condition with connection-less protocols like UDP,
where we do the port reallocation even though its not needed.
This happens when new packets from the same, pre-existing flow are received
in both directions at the exact same time on different CPUs after the
conntrack table was flushed (or conntrack becomes active for first time).
With strict ordering/single cpu, the first packet creates new ct entry and
second packet is resolved as established reply packet.
With parallel processing, both packets are picked up as new and both get
their own ct entry.
In this case, the 'reply' packet (picked up as ORIGINAL) can be mangled by
NAT engine because a port collision is detected.
This change isn't enough to prevent a packet drop later during
nf_conntrack_confirm(), the existing clash resolution strategy will not
detect such reverse clash case. This is resolved by a followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 5fabb01207 ("net: stmmac: Add initial XDP support") sets
PP_FLAG_DMA_SYNC_DEV flag for page_pool unconditionally,
page_pool_recycle_direct() will call page_pool_dma_sync_for_device()
on every page even the page is not going to be reused by XDP program.
When XDP is not enabled, the page which holds the received buffer
will be recycled once the buffer is copied into new SKB by
skb_copy_to_linear_data(), then the MAC core will never reuse this
page any longer. Always setting PP_FLAG_DMA_SYNC_DEV wastes CPU cycles
on unnecessary calling of page_pool_dma_sync_for_device().
After this patch, up to 9% noticeable performance improvement was observed
on certain platforms.
Fixes: 5fabb01207 ("net: stmmac: Add initial XDP support")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20240919121028.1348023-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the virtio-net driver will perform a pre-dma-mapping for
small or mergeable RX buffer. But for small packets, a mismatched address
without VIRTNET_RX_PAD and xdp_headroom is used for unmapping.
That will result in unsynchronized buffers when SWIOTLB is enabled, for
example, when running as a TDX guest.
This patch unifies the address passed to the virtio core as the address of
the virtnet header and fixes the mismatched buffer address.
Changes from v2: unify the buf that passed to the virtio core in small
and merge mode.
Changes from v1: Use ctx to get xdp_headroom.
Fixes: 295525e29a ("virtio_net: merge dma operations when filling mergeable buffers")
Signed-off-by: Wenbo Li <liwenbo.martin@bytedance.com>
Signed-off-by: Jiahui Cen <cenjiahui@bytedance.com>
Signed-off-by: Ying Fang <fangying.tommy@bytedance.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20240919081351.51772-1-liwenbo.martin@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull more block updates from Jens Axboe:
- Improve blk-integrity segment counting and merging (Keith)
- NVMe pull request via Keith:
- Multipath fixes (Hannes)
- Sysfs attribute list NULL terminate fix (Shin'ichiro)
- Remove problematic read-back (Keith)
- Fix for a regression with the IO scheduler switching freezing from
6.11 (Damien)
- Use a raw spinlock for sbitmap, as it may get called from preempt
disabled context (Ming)
- Cleanup for bd_claiming waiting, using var_waitqueue() rather than
the bit waitqueues, as that more accurately describes that it does
(Neil)
- Various cleanups (Kanchan, Qiu-ji, David)
* tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
lib/sbitmap: define swap_lock as raw_spinlock_t
block: Remove unused blk_limits_io_{min,opt}
drbd: Fix atomicity violation in drbd_uuid_set_bm()
block: Fix elv_iosched_local_module handling of "none" scheduler
block: remove bogus union
block: change wait on bd_claiming to use a var_waitqueue
blk-integrity: improved sg segment mapping
block: unexport blk_rq_count_integrity_sg
nvme-rdma: use request to get integrity segments
scsi: use request to get integrity segments
block: provide a request helper for user integrity segments
blk-integrity: consider entire bio list for merging
blk-integrity: properly account for segments
blk-mq: set the nr_integrity_segments from bio
blk-mq: unconditional nr_integrity_segments
Pull spi fixes from Mark Brown:
"Some driver specific fixes that came in during the merge window.
Lorenzo Bianconi did some extra testing on the recently added arioha
driver and found some issues, Alexander Dahl fixed some issues with
signal delays in the Atmel QSPI driver and Jinjie Ruan has been fixing
some nits with runtime PM cleanup"
* tag 'spi-fix-v6.12-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel-quadspi: Avoid overwriting delay register settings
spi: airoha: remove read cache in airoha_snand_dirmap_read()
spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time
spi: atmel-quadspi: Undo runtime PM changes at driver exit time
spi: airoha: fix airoha_snand_{write,read}_data data_len estimation
spi: airoha: fix dirmap_{read,write} operations
Pull RTC updates from Alexandre Belloni:
"More conversions of DT bindings to yaml. There is one new driver, for
the DFRobot SD2405AL and support for important features of the stm32
RTC. Summary:
New driver:
- DFRobot SD2405AL
Drivers:
- stm32: add alarm A out and LSCO support
- sun6i: disable automatic clock input switching
- m48t59: set range"
* tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rc5t619: use proper module tables
rtc: m48t59: set range
dt-bindings: rtc: microcrystal,rv3028: add #clock-cells property
rtc: m48t59: Remove division condition with direct comparison
rtc: at91sam9: fix OF node leak in probe() error path
rtc: sun6i: disable automatic clock input switching
dt-bindings: rtc: Drop non-trivial duplicate compatibles
dt-bindings: vendor-prefixes: Add DFRobot.
dt-bindings: rtc: Add support for SD2405AL.
rtc: Add driver for SD2405AL
rtc: s35390a: Drop vendorless compatible string from match table
rtc: twl: convert comma to semicolon
dt-bindings: rtc: sprd,sc2731-rtc: convert to YAML
rtc: stm32: add alarm A out feature
rtc: stm32: add Low Speed Clock Output (LSCO) support
rtc: stm32: add pinctrl and pinmux interfaces
dt-bindings: rtc: stm32: describe pinmux nodes
This reverts commit 9184b17fbc ("dt-bindings: input: Goodix SPI HID
Touchscreen") because it duplicates existing binding leadings to errors:
goodix,gt7986u.example.dtb:
touchscreen@0: compatible: 'oneOf' conditional failed, one must be fixed:
['goodix,gt7986u'] is too short
'goodix,gt7375p' was expected
This was reported on mailing list on 6th of September, but no reaction
happened from contributor or maintainer to fix it.
Therefore let's drop binding which breaks and duplicates existing one.
Fixes: 9184b17fbc ("dt-bindings: input: Goodix SPI HID Touchscreen")
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_Jsq+QfTtRj_JCqXzktQ49H8VUnztVuaBjvvkg3fwEHniUHw@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Drop support for Devicetree from, because the binding is being reverted
(on basis of duplicating existing binding) and property was not added to
the original binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Pull memblock updates from Mike Rapoport:
- new memblock_estimated_nr_free_pages() helper to replace
totalram_pages() which is less accurate when
CONFIG_DEFERRED_STRUCT_PAGE_INIT is set
- fixes for memblock tests
* tag 'memblock-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
s390/mm: get estimated free pages by memblock api
kernel/fork.c: get estimated free pages by memblock api
mm/memblock: introduce a new helper memblock_estimated_nr_free_pages()
memblock test: fix implicit declaration of function 'strscpy'
memblock test: fix implicit declaration of function 'isspace'
memblock test: fix implicit declaration of function 'memparse'
memblock test: add the definition of __setup()
memblock test: fix implicit declaration of function 'virt_to_phys'
tools/testing: abstract two init.h into common include directory
memblock tests: include export.h in linkage.h as kernel dose
memblock tests: include memory_hotplug.h in mmzone.h as kernel dose
