Pedro Tammela says:
====================
net/sched: cleanup parsing prints in htb and qfq
These two qdiscs are still using prints on dmesg to report parsing
errors. Since the parsing code has access to extack, convert these error
messages to extack.
QFQ also had the opportunity to remove some redundant code in the
parameters parsing by transforming some attributes into parsing
policies.
v4->v5: Rebased
v3->v4: Drop 'BITification' as suggested by Eric
v2->v3: Address suggestions by Jakub and Simon
v1->v2: Address suggestions by Jakub
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The QFQ qdisc class has parameter bounds that are not being
checked for correctness.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pedro Tammela says:
====================
net/sched: act_pedit: minor improvements
This series aims to improve the code and usability of act_pedit for
netlink users.
Patches 1-2 improves error reporting for extended keys parsing with extack.
Patch 3 checks the static offsets a priori on create/update. Currently,
this is done at the datapath for both static and runtime offsets.
Patch 4 removes a check from the datapath which is redundant since the
netlink parsing validates the key types.
Patch 5 changes the 'pr_info()' calls in the datapath to rate limited
versions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Unbounded info messages in the pedit datapath can flood the printk
ring buffer quite easily depending on the action created.
As these messages are informational, usually printing some, not all,
is enough to bring attention to the real issue.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Static key offsets should always be on 32 bit boundaries. Validate them on
create/update time for static offsets and move the datapath validation
for runtime offsets only.
iproute2 already errors out if a given offset and data size cannot be
packed to a 32 bit boundary. This change will make sure users which
create/update pedit instances directly via netlink also error out,
instead of finding out when packets are traversing.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have extack available when parsing 'ex' keys, so pass it to
tcf_pedit_keys_ex_parse and add more detailed error messages.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We started disabling '-Warray-bounds' for gcc-12 originally on s390,
because it resulted in some warnings that weren't realistically fixable
(commit 8b202ee218: "s390: disable -Warray-bounds").
That s390-specific issue was then found to be less common elsewhere, but
generic (see f0be87c42c: "gcc-12: disable '-Warray-bounds' universally
for now"), and then later expanded the version check was expanded to
gcc-11 (5a41237ad1: "gcc: disable -Warray-bounds for gcc-11 too").
And it turns out that I was much too optimistic in thinking that it's
all going to go away, and here we are with gcc-13 showing all the same
issues. So instead of expanding this one version at a time, let's just
disable it for gcc-11+, and put an end limit to it only when we actually
find a solution.
Yes, I'm sure some of this is because the kernel just does odd things
(like our "container_of()" use, but also knowingly playing games with
things like linker tables and array layouts).
And yes, some of the warnings are likely signs of real bugs, but when
there are hundreds of false positives, that doesn't really help.
Oh well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix the prefix in the kernel source tarball
- Fix a typo in the copyright file in Debian package
* tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use proper prefix for tarballs to fix rpm-pkg build error
kbuild: deb-pkg: Fix a spell typo in mkdebian script
Pull irq fix from Borislav Petkov:
- Remove an over-zealous sanity check of the array of MSI-X vectors to
be allocated for a device
* tag 'irq_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Remove over-zealous hardware size check in pci_msix_validate_entries()
Pull x86 fix from Borislav Petkov
- Fix for older binutils which do not support C-syntax constant
suffixes
* tag 'x86_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Do not use integer constant suffixes in inline asm
Pull input fixes from Dmitry Torokhov:
- a check in pegasus-notetaker driver to validate the type of pipe when
probing a new device
- a fix for Cypress touch controller to correctly parse maximum number
of touches.
* tag 'input-for-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyttsp5 - fix sensing configuration data structure
Input: pegasus-notetaker - check pipe type when probing
This new target builds only the debian source package.
Unify the build rules of deb-pkg, srcdeb-pkg, bindeb-pkg to avoid
code duplication.
--no-check-builddeps is added to srcdeb-pkg so that build dependencies
will not be checked.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The kernel will print several warnings in a short period of time
when it stalls. Like this:
First warning:
[ 7100.097547] ------------[ cut here ]------------
[ 7100.097550] NETDEV WATCHDOG: eno2 (xxx): transmit queue 8 timed out
[ 7100.097571] WARNING: CPU: 8 PID: 0 at net/sched/sch_generic.c:467
dev_watchdog+0x260/0x270
...
Second warning:
[ 7147.756952] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 7147.756958] rcu: 24-....: (59999 ticks this GP) idle=546/1/0x400000000000000
softirq=367 3137/3673146 fqs=13844
[ 7147.756960] (t=60001 jiffies g=4322709 q=133381)
[ 7147.756962] NMI backtrace for cpu 24
...
We calculate that the transmit queue start stall should occur before
7095s according to watchdog_timeo, the rcu start stall at 7087s.
These two times are close together, it is difficult to confirm which
happened first.
To let users know the exact time the stall started, print msecs when
the transmit queue time out.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Remove skb_mac_header() dependency in DSA xmit path
Eric started working on removing skb_mac_header() assumptions from the
networking xmit path, and I offered to help for DSA:
https://lore.kernel.org/netdev/20230321164519.1286357-1-edumazet@google.com/
The majority of this patch set is a straightforward replacement of
skb_mac_header() with skb->data (hidden either behind skb_eth_hdr(), or
behind skb_vlan_eth_hdr()). The only patch which is more "interesting"
is 9/9.
Another potential caller of __skb_vlan_pop() on xmit (and therefore
also of skb_mac_header()) is tcf_vlan_act(), but I haven't had the time
to investigate that (enough to submit changes other than what's here).
v1->v2:
- 09/09: document the vlan_tci argument of vlan_remove_tag() in the kdoc
v1 at:
https://lore.kernel.org/netdev/20230322233823.1806736-1-vladimir.oltean@nxp.com/
Cc: Madalin Bucur <madalin.bucur@nxp.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ocelot_xmit_get_vlan_info() calls __skb_vlan_pop() as the most
appropriate helper I could find which strips away a VLAN header.
That's all I need it to do, but __skb_vlan_pop() has more logic, which
will become incompatible with the future revert of commit 6d1ccff627
("net: reset mac header in dev_start_xmit()").
Namely, it performs a sanity check on skb_mac_header(), which will stop
being set after the above revert, so it will return an error instead of
removing the VLAN tag.
ocelot_xmit_get_vlan_info() gets called in 2 circumstances:
(1) the port is under a VLAN-aware bridge and the bridge sends
VLAN-tagged packets
(2) the port is under a VLAN-aware bridge and somebody else (an 8021q
upper) sends VLAN-tagged packets (using a VID that isn't in the
bridge vlan tables)
In case (1), there is actually no bug to defend against, because
br_dev_xmit() calls skb_reset_mac_header() and things continue to work.
However, in case (2), illustrated using the commands below, it can be
seen that our intervention is needed, since __skb_vlan_pop() complains:
$ ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set $eth master br0 && ip link set $eth up
$ ip link add link $eth name $eth.100 type vlan id 100 && ip link set $eth.100 up
$ ip addr add 192.168.100.1/24 dev $eth.100
I could fend off the checks in __skb_vlan_pop() with some
skb_mac_header_was_set() calls, but seeing how few callers of
__skb_vlan_pop() there are from TX paths, that seems rather
unproductive.
As an alternative solution, extract the bare minimum logic to strip a
VLAN header, and move it to a new helper named vlan_remove_tag(), close
to the definition of vlan_insert_tag(). Document it appropriately and
make ocelot_xmit_get_vlan_info() call this smaller helper instead.
Seeing that it doesn't appear illegal to test skb->protocol in the TX
path, I guess it would be a good for vlan_remove_tag() to also absorb
the vlan_set_encap_proto() function call.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once commit 6d1ccff627 ("net: reset mac header in dev_start_xmit()")
will be reverted, it will no longer be true that skb->data points at
skb_mac_header(skb) - since the skb->mac_header will not be set - so
stop saying that, and just say that it points to the MAC header.
I've reviewed vlan_insert_tag() and it does not *actually* depend on
skb_mac_header(), so reword that to avoid the confusion.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff627 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use
skb_vlan_eth_hdr() to get to the VLAN header instead, which assumes it's
located at skb->data (assumption which holds true here).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff627 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use skb_eth_hdr() to
get to the Ethernet header's MAC DA instead, helper which assumes this
header is located at skb->data (assumption which holds true here).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff627 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use
skb_vlan_eth_hdr() to get to the VLAN header instead, which assumes it's
located at skb->data (assumption which holds true here).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It appears that dpaa_enable_tx_csum() only calls skb_reset_mac_header()
to get to the VLAN header using skb_mac_header().
We can use skb_vlan_eth_hdr() to get to the VLAN header based on
skb->data directly. This avoids spending a few cycles to set
skb->mac_header.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to skb_eth_hdr() introduced in commit 96cc4b6958 ("macvlan: do
not assume mac_header is set in macvlan_broadcast()"), let's introduce a
skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get
to the VLAN header based on skb->data rather than based on the
skb_mac_header(skb).
We also consolidate the drivers that dereference skb->data to go through
this helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a preparatory change for the deletion of skb_reset_mac_header(skb)
from __dev_queue_xmit(). After that deletion, skb_mac_header(skb) will
no longer be set in TX paths, from which __vlan_insert_inner_tag() can
still be called (perhaps indirectly).
If we don't make this change, then an unset MAC header (equal to ~0U)
will become set after the adjustment with VLAN_HLEN.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for the Microchip LAN867x 10BASE-T1S family
(LAN8670/1/2). The driver supports P2MP with PLCA.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch complains that:
mtk_wed_hw_add_debugfs() warn: 'dir' is an error pointer or valid
Debugfs checks are generally not supposed to be checked
for errors and it is not necessary here.
fix it by just deleting the dead code.
Signed-off-by: Wang Zhang <silver_code@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
We use napi_threaded_poll() in order to reduce our softirq dependency.
We can add a followup of 821eba962d ("net: optimize napi_schedule_rps()")
to further remove the need of firing NET_RX_SOFTIRQ whenever
RPS/RFS are used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we call skb_defer_free_flush() from napi_threaded_poll(),
we can avoid to raise IPI from skb_attempt_defer_free()
when the list becomes too big.
This allows napi_threaded_poll() to rely less on softirqs,
and lowers latency caused by a too big list.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We plan using skb_defer_free_flush() from napi_threaded_poll()
in the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kfree_skb() can be called from hard irq handlers,
but skb_attempt_defer_free() is meant to be used
from process or BH contexts, and skb_defer_free_flush()
is meant to be called from BH contexts.
Not having to mask hard irq can save some cycles.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
This series lowers the CPU usage of the ice driver when using its
provided /dev/gnss*.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Older chips (like MT7622) use a different bit in ib2 to enable hardware
counter support. Add macros for both and select the appropriate bit.
Fixes: 3fbe4d8c0e ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit f8d94c4e40 ("kbuild: do not create intermediate *.tar
for source tarballs"), 'make rpm-pkg' fails because the prefix of the
source tarball is 'linux.tar/' instead of 'linux/'. $(basename $@)
strips only '.gz' from the filename linux.tar.gz.
You need to strip two suffixes from compressed tarballs and one suffix
from uncompressed tarballs (for example 'perf-6.3.0.tar' generated by
'make perf-tar-src-pkg').
One tricky fix might be --prefix=$(firstword $(subst .tar, ,$@))/
but I think it is better to hard-code the prefix.
Fixes: f8d94c4e40 ("kbuild: do not create intermediate *.tar for source tarballs")
Reported-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
- Use correct address limit for Audigy
- Use the right constant to actually make a step on Audigy
- Don't store *_DBG_STEP and the address in emu->fx8010.dbg, as
otherwise unrelated operations would make steps, too
This is untested. as10k1 was never ported to Audigy anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1144004-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The rev2 cards use CA0108, but the embedded P17V goes entirely unused.
Also, A_IOCTL (which is really the GPIO port) is actually the FPGA
control port, so messing with it is no good idea.
The hacks are actually mutually exclusive, so make that explicit while
we're at it.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143888-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
