dev_pm_ops.thaw() is called in following cases:
* normal case: after hibernation image has been created.
* error case 1: creation of a hibernation image has failed.
* error case 2: restoration from a hibernation image has failed.
For normal case, it is called mainly for resume storage devices for
saving the hibernation image. Other devices that are not involved
in the image saving do not need to resume the device. But since there's
no api to know which case thaw() is called, device drivers can't
conditionally resume device in thaw().
The new pm_hibernate_is_recovering() is such a api to query if thaw() is
called in normal case.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250710062313.3226149-5-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
When hibernate with data center dGPUs, huge number of VRAM data will be
moved to shmem during dev_pm_ops.prepare(). These shmem pages take a lot
of system memory so that there's no enough free memory for creating the
hibernation image. This will cause hibernation fail and abort.
After dev_pm_ops.prepare(), call shrink_all_memory() to force move shmem
pages to swap disk and reclaim the pages, so that there's enough system
memory for hibernation image and less pages needed to copy to the image.
This patch can only flush and free about half shmem pages. It will be
better to flush and free more pages, even all of shmem pages, so that
there're less pages to be copied to the hibernation image and the overall
hibernation time can be reduced.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250710062313.3226149-4-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
When hibernate with data center dGPUs, huge number of VRAM BOs evicted
to GTT and takes too much system memory. This will cause hibernation
fail due to insufficient memory for creating the hibernation image.
Move GTT BOs to shmem in KMD, then shmem to swap disk in kernel
hibernation code to make room for hibernation image.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250710062313.3226149-3-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
struct nouveau_sched contains a waitque needed to prevent
drm_sched_fini() from being called while there are still jobs pending.
Doing so so far would have caused memory leaks.
With the new memleak-free mode of operation switched on in
drm_sched_fini() by providing the callback nouveau_sched_cancel_job()
the waitque is not necessary anymore.
Remove the waitque.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-10-phasta@kernel.org
There is a new callback for always tearing the scheduler down in a
leak-free, deadlock-free manner.
Port Nouveau as its first user by providing the scheduler with a
callback that ensures the fence context gets killed in drm_sched_fini().
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-9-phasta@kernel.org
In order to implement a new DRM GPU scheduler callback in Nouveau, a
helper for obtaining a nouveau_fence from a dma_fence is necessary. Such
a helper exists already inside nouveau_fence.c, called from_fence().
Make that helper available to other C files with a more precise name.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-8-phasta@kernel.org
The GPU Scheduler now supports a new callback, cancel_job(), which lets
the scheduler cancel all jobs which might not yet be freed when
drm_sched_fini() runs. Using this callback allows for significantly
simplifying the mock scheduler teardown code.
Implement the cancel_job() callback and adjust the code where necessary.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-5-phasta@kernel.org
The object is potentially already gone after the drm_gem_object_put().
In general the object should be fully constructed before calling
drm_gem_handle_create(), except the debugfs tracking uses a separate
lock and list and separate flag to denotate whether the object is
actually initialized.
Since I'm touching this all anyway simplify this by only adding the
object to the debugfs when it's ready for that, which allows us to
delete that separate flag. panthor_gem_debugfs_bo_rm() already checks
whether we've actually been added to the list or this is some error
path cleanup.
v2: Fix build issues for !CONFIG_DEBUGFS (Adrián)
v3: Add linebreak and remove outdated comment (Liviu)
Fixes: a3707f53eb ("drm/panthor: show device-wide list of DRM GEM objects over DebugFS")
Cc: Adrián Larumbe <adrian.larumbe@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250709135220.1428931-1-simona.vetter@ffwll.ch
Change the default register settings for Gen7 to mach Gen4 and
later. Gen7 currently uses the settings for Gen1, which is most
likely incorrect.
Using Gen4+ settings enables E2M linear-access modes in VGACRA2.
It appears to be related to the chip's PCIE2MBOX feature, which
is unused.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250706162816.211552-11-tzimmermann@suse.de
Duplicate ast_set_def_ext_reg() for individual chip generations
and move call it into per-chip source files. Remove the original
code. AST2100 and AST2500 reuse the function from earlier chips.
AST2600 appears to be incorrect as it uses an older function. Keep
this behavior for now.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250706162816.211552-9-tzimmermann@suse.de
Most of struct ast_dramstruct stores hardware state. Some index
values have known or special meaning. The known values are
- 0xffff - Terminal entry in the array
- 0xff00 - Delays the programming for usecs
- 0x0004 - Sets the type of DRAM
Add constants and helper macros for these cases. Also add a helper
macro for testing. Update Gen1 and Gen2+ accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250706162816.211552-8-tzimmermann@suse.de
Move POST code for Gen2+ and Gen1 to separate source files and
hide it in ast_2100_post() ans ast_2000_post(). With P2A
configuration, the POST logic for these chip generations has
been mingled in ast_init_dram_reg(). Hence, handle all generations
in a single change. The split simplifies both cases. Also move
the DRAM init tables for each Gen into the respective source
file. No changes to the overall logic.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250706162816.211552-6-tzimmermann@suse.de
Move POST code for Gen4+ to separate source file and hide it in
ast_2300_post(). With P2A configuration, it performs a full board
POST and enables the transmitter chip; otherwise it only enables the
transmitter chip.
Also fix coding style in several places. No changes to the overall
logic.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250706162816.211552-5-tzimmermann@suse.de
The CMA heap's name in devtmpfs can vary depending on how the heap is
defined. Its name defaults to "reserved", but if a CMA area is defined
in the devicetree, the heap takes on the devicetree node's name, such as
"default-pool" or "linux,cma". To simplify naming, unconditionally name
it "default_cma_region", but keep a legacy node in place backed by the
same underlying allocator for backwards compatibility.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://lore.kernel.org/r/20250610131231.1724627-4-jkangas@redhat.com
The all video ports of rk3568/rk3588 share the same OVL_LAYER_SEL
and OVL_PORT_SEL registers, and the configuration of these two registers
can be set to take effect when the vsync signal arrives at a certain Video
Port.
If two threads for two display output choose to update these two registers
simultaneously to meet their own plane adjustment requirements(change plane
zpos or switch plane from one crtc to another), then no matter which Video
Port'svsync signal we choose to follow for these two registers, the display
output of the other Video Port will be abnormal.
This is because the configuration of this Video Port does not take
effect at the right time (its configuration should take effect when its
VSYNC signal arrives).
In order to solve this problem, when performing plane migration or
change the zpos of planes, there are two things to be observed and
followed:
1. When a plane is migrated from one VP to another, the configuration of
the layer can only take effect after the Port mux configuration is
enabled.
2. When change the zpos of planes, we must ensure that the change for
the previous VP takes effect before we proceed to change the next VP.
Otherwise, the new configuration might overwrite the previous one for
the previous VP, or it could lead to the configuration of the previous
VP being take effect along with the VSYNC of the new VP.
This issue only occurs in scenarios where multi-display output is enabled.
Fixes: c5996e4ab1 ("drm/rockchip: vop2: Make overlay layer select register configuration take effect by vsync")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250421102156.424480-1-andyshrk@163.com
This function not only configure hardware reset register, but also
do some other configurations. Therefore, it is more appropriate to
name it inno_hdmi_init_hw, which will also facilitate the addition
of other functions to this function in the following patch.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250512124615.2848731-5-andyshrk@163.com
Convert it to drm bridge driver, it will be convenient for us to
migrate the connector part to the display driver later.
Considering that some code depend on the connector, the following
changes have been made:
- Only process edid in &drm_bridge_funcs.edid_read(), so no need to
store additional edid info.
- Now cdn_dp_get_sink_capability() only focused on reading DPCD_REV.
- Update bpc info in cdn_dp_bridge_atomic_enable() instead of
cdn_dp_encoder_mode_set(). Actually, the bpc data will be used in
cdn_dp_bridge_atomic_enable().
- Switch to use DRM_BRIDGE_OP_DP_AUDIO helpers.
This patch also convert to use devm_drm_bridge_alloc() API.
Tested with RK3399 EVB IND board.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250529071334.441-1-kernel@airkyi.com
Each window of a vop2 is usable by a specific set of video ports, so while
binding the vop2, we look through the list of available windows trying to
find one designated as primary-plane and usable by that specific port.
The code later wants to use drm_crtc_init_with_planes with that found
primary plane, but nothing has checked so far if a primary plane was
actually found.
For whatever reason, the rk3576 vp2 does not have a usable primary window
(if vp0 is also in use) which brought the issue to light and ended in a
null-pointer dereference further down.
As we expect a primary-plane to exist for a video-port, add a check at
the end of the window-iteration and fail probing if none was found.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250610212748.1062375-1-heiko@sntech.de
Updates for v6.17
CI:
- uprev mesa and ci-templates
- use shallow clone to speed up build jobs
- remove sdm845/cheza jobs. These runners are no more (RIP
dear chezas)
- fix runner tag for i915 cml runners
- uprev igt to pull in msm test fixes
Core:
- VM_BIND support!
- single source of truth for UBWC configuration. Adds a global soc
driver for UBWC config which is used from display and GPU. (And
later vidc/camera/etc)
- Decouple ties between GPU and KMS, adding a `separate_gpu_kms`
modparam to allow the GPU and KMS to bind to separate DRM devices.
This should better deal with more exotic SoC configurations where
the number of GPUs is different from number of DPUs. The default
behavior is to still come up as a single unified DRM device to
avoid surprising userspace.
DP:
- major rework of the I/O accessors
DPU:
- use version checks instead of feature bits
- SM8750 support
- set min_prefill_lines for SC8180X
DSI:
- SM8750 support
GPU:
- speedbin support for X1-85
- X1-45 support
MDSS:
- SM8750 support
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Robin Clark <robin.clark@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACSVV0217R+kpoWQJeuYGHf6q_4aFyEJuKa=dZZKOnLQzFwppg@mail.gmail.com
drm/i915 feature pull #2 for v6.17:
Features and functionality:
- Add drm_panic support for both i915 and xe drivers (Jocelyn Falempe)
- Add initial flip queue implementation, disabled by default, for LNL and PTL
(Ville)
- Add support for Wildcat Lake (WCL) display, version 30.02 (Matt Roper, Matt
Atwood, Dnyaneshwar)
- Extend drm_panel and follower support to DDI eDP (Arun)
Refactoring and cleanups:
- Make all global state objects opaque (Jani)
- Move display works to display specific unordered workqueue (Luca)
- Add and use struct drm_device based pcode interface (Jani, Lucas)
- Use clamp() instead of max()+min() combo (Ankit)
- Simplify wait for power well disable (Jani)
- Various stylistics cleanups and renames (Jani)
Fixes:
- Deal with loss of pipe DMC state (Ville)
- Fix PTL HDCP2 stream status check (Suraj)
- Add workaround for ADL-P DKL PHY DP and HDMI (Nemesa)
- Fix skl_print_wm_changes() stack usage with KMSAN (Arnd Bergmann)
- Fix PCON capability reads on non-branch devices (Chaitanya)
- Fix which platforms have ultra joiner (Ankit)
DRM core changes:
- Add ttm_bo_kmap_try_from_panic() for xe drm_panic support (Jocelyn Falempe)
- Add private pointer to struct drm_scanout buffer for xe/i915 drm_panic support
(Jocelyn Falempe)
Merges:
- Backmerge drm-next for drm_panel and xe changes (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6d728bf6ef23681b00dfbc7da9aeae41042dee02@intel.com
