On excessive bit errors for the FCP channel ingress fibre path, the channel
notifies us. Previously, we only emitted a kernel message and a trace
record. Since performance can become suboptimal with I/O timeouts due to
bit errors, we now stop using an FCP device by default on channel
notification so multipath on top can timely failover to other paths. A new
module parameter zfcp.ber_stop can be used to get zfcp old behavior.
User explanation of new kernel message:
* Description:
* The FCP channel reported that its bit error threshold has been exceeded.
* These errors might result from a problem with the physical components
* of the local fibre link into the FCP channel.
* The problem might be damage or malfunction of the cable or
* cable connection between the FCP channel and
* the adjacent fabric switch port or the point-to-point peer.
* Find details about the errors in the HBA trace for the FCP device.
* The zfcp device driver closed down the FCP device
* to limit the performance impact from possible I/O command timeouts.
* User action:
* Check for problems on the local fibre link, ensure that fibre optics are
* clean and functional, and all cables are properly plugged.
* After the repair action, you can manually recover the FCP device by
* writing "0" into its "failed" sysfs attribute.
* If recovery through sysfs is not possible, set the CHPID of the device
* offline and back online on the service element.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org> #2.6.30+
Link: https://lore.kernel.org/r/20191001104949.42810-1-maier@linux.ibm.com
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a non-passthrough command is terminated with CHECK CONDITION, request
sense is executed by hijacking the command descriptor. Since
scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd() do not save/restore the
original command resid, the value returned on failure of the original
command is lost and replaced with the value set by the execution of the
request sense command. This value may in many instances be unaligned to the
device sector size, causing sd_done() to print a warning message about the
incorrect unaligned resid before the command is retried.
Fix this problem by saving the original command residual in struct
scsi_eh_save using scsi_eh_prep_cmnd() and restoring it in
scsi_eh_restore_cmnd(). In addition, to make sure that the request sense
command is executed with a correctly initialized command structure, also
reset the residual to 0 in scsi_eh_prep_cmnd() after saving the original
command value in struct scsi_eh_save.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191001074839.1994-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 88263208dd ("scsi: qla2xxx: Complain if sp->done() is not called
from the completion path") introduced the WARN_ON_ONCE in
qla2x00_status_cont_entry(). The assumption was that there is only one
status continuations element. According to the firmware documentation it is
possible that multiple status continuations are emitted by the firmware.
Fixes: 88263208dd ("scsi: qla2xxx: Complain if sp->done() is not called from the completion path")
Link: https://lore.kernel.org/r/20190927073031.62296-1-dwagner@suse.de
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
I've got a report about a UAS drive enclosure reporting back Sense: Logical
unit access not authorized if the drive it holds is password protected.
While the drive is obviously unusable in that state as a mass storage
device, it still exists as a sd device and when the system is asked to
perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If
that fails due to password protection, the error must be ignored.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since 'commit fc8d0590d9 ("libcxgbi: Add ipv6 api to driver")' was
introduced, there is no call to csk_print_port() and csk_print_ip() is
made.
Hence kernel build with clang complains below message:
drivers/scsi/cxgbi/libcxgbi.c:2287:19: warning: unused function 'csk_print_port' [-Wunused-function]
static inline int csk_print_port(struct cxgbi_sock *csk, char *buf)
^
drivers/scsi/cxgbi/libcxgbi.c:2298:19: warning: unused function 'csk_print_ip' [-Wunused-function]
static inline int csk_print_ip(struct cxgbi_sock *csk, char *buf)
^
Remove csk_print_port() and csk_print_ip() to stop warning.
Link: https://lore.kernel.org/r/20190924093716.GA78230@LGEARND20B15
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Couple of users had requested to print the SCSI command age along with
command failure errors. This is a small change, but allows users to get
more important information about the command that was failed, it would help
the users in debugging the command failures:
Link: https://lore.kernel.org/r/20190926052501.GA8352@machine1
Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rework from previous work by:
Sujit Reddy Thumma <sthumma@codeaurora.org>
Until now the scsi mid-layer forbids runtime suspend till userspace enables
it. This is mainly to quarantine some disks with broken runtime power
management or have high latencies executing suspend resume callbacks. If
the userspace doesn't enable the runtime suspend the underlying hardware
will be always on even when it is not doing any useful work and thus
wasting power.
Some low-level drivers for the controllers can efficiently use runtime
power management to reduce power consumption and improve battery life.
Allow runtime suspend parameters override within the LLD itself instead of
waiting for userspace to control the power management.
Link: https://lore.kernel.org/r/1568649411-5127-2-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don't populate the array setup_attrs on the stack but instead make it
static const. Makes the object code smaller by 180 bytes.
Before:
text data bss dec hex filename
2140 224 0 2364 93c drivers/scsi/ufs/ufshcd-dwc.o
After:
text data bss dec hex filename
1863 320 0 2183 887 drivers/scsi/ufs/ufshcd-dwc.o
(gcc version 9.2.1, amd64)
Link: https://lore.kernel.org/r/20190906170104.10450-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don't populate the array 'options' on the stack but instead make it static
const. Makes the object code smaller by 143 bytes.
Before:
text data bss dec hex filename
94483 11272 1184 106939 1a1bb drivers/scsi/ips.o
After:
text data bss dec hex filename
94244 11368 1184 106796 1a12c drivers/scsi/ips.o
(gcc version 9.2.1, amd64)
Link: https://lore.kernel.org/r/20190906164522.5644-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don't populate the array dev_cmd_err on the stack but instead make it
static const. Makes the object code smaller by 80 bytes.
Before:
text data bss dec hex filename
21461 1564 0 23025 59f1 drivers/scsi/fnic/vnic_dev.o
After:
text data bss dec hex filename
21318 1628 0 22946 59a2 drivers/scsi/fnic/vnic_dev.o
(gcc version 9.2.1, amd64)
Link: https://lore.kernel.org/r/20190906163945.3889-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/smartpqi/smartpqi_init.c: In function 'pqi_driver_version_show':
drivers/scsi/smartpqi/smartpqi_init.c:6164:24: warning:
variable 'ctrl_info' set but not used [-Wunused-but-set-variable]
commit 6d90615f13 ("scsi: smartpqi: add sysfs entries") added it but
it was never used. Also remove variable 'shost'.
[mkp: commit desc]
Link: https://lore.kernel.org/r/20190831130348.20552-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Load driver with module parameter "max_msix_vectors". Value provided in
module parameter is not used by mpt3sas driver. Driver loads with max
controller supported MSI-X value.
In _base_alloc_irq_vectors use reply_queue_count which is determined using
user provided msix value insted of ioc->msix_vector_count which tells max
supported msix value of the controller.
Link: https://lore.kernel.org/r/1568379890-18347-13-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If any faulty application issues an NVMe Encapsulated commands to HBA which
doesn't support NVMe protocol then driver should return the command as
invalid with the following message.
"HBA doesn't support NVMe. Rejecting NVMe Encapsulated request."
Otherwise below page fault kernel panic will be observed while building the
PRPs as there is no PRP pools allocated for the HBA which doesn't support
NVMe drives.
RIP: 0010:_base_build_nvme_prp+0x3b/0xf0 [mpt3sas]
Call Trace:
_ctl_do_mpt_command+0x931/0x1120 [mpt3sas]
_ctl_ioctl_main.isra.11+0xa28/0x11e0 [mpt3sas]
? prepare_to_wait+0xb0/0xb0
? tty_ldisc_deref+0x16/0x20
_ctl_ioctl+0x1a/0x20 [mpt3sas]
do_vfs_ioctl+0xaa/0x620
? vfs_read+0x117/0x140
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x60/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
[mkp: tweaked error string]
Link: https://lore.kernel.org/r/1568379890-18347-12-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The firmware image layout has been changed for Aero controllers. All
compatible HBAs have to get Firmware Package version from Component Image
Header layout.
The Signature field in FW header is set to 0xEB000042 for products
compatible with Component Image Header.
For compatible controllers, driver fetches firmware package version from
ApplicationSpecific field of Component Image Header.
Link: https://lore.kernel.org/r/1568379890-18347-11-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Added a new status flag named MPT3_DIAG_BUFFER_IS_APP_OWNED and it will set
whenever application registers the diag buffer & it will be cleared when
application unregisters the buffer.
When this flag is enabled, and if application issues diag buffer register
command without releasing the buffer, then register command will be failed
with -EINVAL status by saying that this buffer is already registered by the
application.
When user issues a trace buffer register command through sysfs parameter,
and if trace buffer is in released stated but not yet unregistered by the
application which was owning it, then driver will unregister the buffer by
itself and freshly register the 1MB sized trace buffer with the HBA
firmware.
Link: https://lore.kernel.org/r/1568379890-18347-9-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The diag buffer which is allocated during driver load time or through sysfs
parameter is marked as driver allocated diag buffer.
MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED bit will be set for this buffer.
This buffer won't be de-allocated even when application issues unregister
command, driver just clears the registered status bit. Same buffer will be
reused while re-registering the same diag buffer type by any application.
While re-registering the same diag buffer type application has to register
with the same size that the buffer was allocated during driver load
time. This buffer size can be read by the application by issuing diag
'query' command.
This always makes sure that the memory is available for applications for
collecting the firmware logs. Only thing is that this won't allow the
application to re-register the diag buffer with different size, but the
buffer size which is allocated during driver load time will be enough for
most of the cases for collecting the firmware logs.
Link: https://lore.kernel.org/r/1568379890-18347-8-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
