In some cases the typical platform driver that act as genpd provider, may
need its own ->sync_state() callback to manage various things. In this
regards, the provider most likely wants to allow its corresponding genpds
to be powered-off.
For this reason, let's introduce a new genpd helper function,
of_genpd_sync_state() that helps genpd provider drivers to achieve this.
Suggested-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-8-ulf.hansson@linaro.org
To take the next step for a more common handling of the genpd providers,
let's add the genpd->dev to the genpd provider bus when registering a genpd
OF provider.
Also note, to allow us to add devices to the genpd provider bus we need to
make sure the bus has been registered first, which is done via a
core_initcall. Hence, calls to of_genpd_add_provider_simple|onecell() must
be done after the bus has been registered, else they will fail.
Suggested-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-7-ulf.hansson@linaro.org
When we create a genpd via pm_genpd_init() we are initializing a
corresponding struct device for it, but we don't add the device to any
bus_type. It has not really been needed as the device is used as cookie to
help us manage OPP tables.
However, to prepare to make better use of the device, let's add a new genpd
provider bus_type and a corresponding genpd provider driver. Subsequent
changes will make use of this.
Suggested-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-6-ulf.hansson@linaro.org
Subsequent changes to genpd adds a limitation that registering a genpd OF
providers must be done after its bus registration, which is at
core_initcall.
To adopt to this, let's split the initialization into two steps. The first
part keep registering the PM domains with genpd at early_initcall, as this
is needed to bringup the CPUs for R-Car H1, by calling
rcar_sysc_power_up_cpu(). The second and new part, moves the registration
of the genpd OF provider to a postcore_initcall().
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-2-ulf.hansson@linaro.org
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.17.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
'struct meson_secure_pwrc_domain_data' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
9248 408 0 9656 25b8 drivers/pmdomain/amlogic/meson-secure-pwrc.o
After:
=====
text data bss dec hex filename
9344 304 0 9648 25b0 drivers/pmdomain/amlogic/meson-secure-pwrc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e71abd8d75dd842690e5a11e38037bcf5feac189.1751816732.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Renesas Kconfig is using "SoC chip number" for CONFIG symbol, but is
using "SoC chip name" for menu description. Because of it, it looks
random order when we run "make menuconfig".
commit 6d5aded8d5 ("soc: renesas: Sort driver description title")
sorted Renesas Kconfig by "menu description title order" (= SoC chip
name), but it makes confusable to add new config, because developer
usually checks CONFIG symbols (= SoC chip number).
Let's indicate both "SoC chip number" and "SoC chip name" in description
and sort it again.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87ikkacacf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v6.16-rc[n] into the next branch, to allow
them to get tested together with the new changes that are targeted for
v6.17.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
pm_domain_cpu_gov is selecting a cluster idle state but does not consider
latency tolerance of child CPUs. This results in deeper cluster idle state
whose latency does not meet latency tolerance requirement.
Select deeper idle state only if global and device latency tolerance of all
child CPUs meet.
Test results on SM8750 with 300 usec PM-QoS on CPU0 which is less than
domain idle state entry (2150) + exit (1983) usec latency mentioned in
devicetree, demonstrate the issue.
# echo 300 > /sys/devices/system/cpu/cpu0/power/pm_qos_resume_latency_us
Before: (Usage is incrementing)
======
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 29817 537 8 270 0
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 30348 542 8 271 0
After: (Usage is not incrementing due to latency tolerance)
======
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 39319 626 14 307 0
# cat /sys/kernel/debug/pm_genpd/power-domain-cluster0/idle_states
State Time Spent(ms) Usage Rejected Above Below
S0 39319 626 14 307 0
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Fixes: e94999688e ("PM / Domains: Add genpd governor for CPUs")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250709-pmdomain_qos-v2-1-976b12257899@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In order to support the complex power sequencing required by the TH1520
GPU, the AON power domain driver must be responsible for initiating the
corresponding sequencer driver. This functionality is specific to
platforms where the GPU power sequencing hardware is controlled by the
AON block.
Extend the AON power domain driver to check for the presence of the
"gpu-clkgen" reset in its own device tree node.
If the property is found, create and register a new auxiliary device.
This device acts as a proxy that allows the dedicated `pwrseq-thead-gpu`
auxiliary driver to bind and take control of the sequencing logic.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250623-apr_14_for_sending-v6-3-6583ce0f6c25@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.17.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250612-apple-kconfig-defconfig-v1-1-0e6f9cb512c1@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull Kbuild fixes from Masahiro Yamada:
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
* tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gendwarfksyms: Fix structure type overrides
kbuild: move warnings about linux/export.h from W=1 to W=2
As we always iterate through the entire die_map when expanding
type strings, recursively processing referenced types in
type_expand_child() is not actually necessary. Furthermore,
the type_string kABI rule added in commit c9083467f7
("gendwarfksyms: Add a kABI rule to override type strings") can
fail to override type strings for structures due to a missing
kabi_get_type_string() check in this function.
Fix the issue by dropping the unnecessary recursion and moving
the override check to type_expand(). Note that symbol versions
are otherwise unchanged with this patch.
Fixes: c9083467f7 ("gendwarfksyms: Add a kABI rule to override type strings")
Reported-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze
Pull io_uring fixes from Jens Axboe:
- Fix for a race between SQPOLL exit and fdinfo reading.
It's slim and I was only able to reproduce this with an artificial
delay in the kernel. Followup sparse fix as well to unify the access
to ->thread.
- Fix for multiple buffer peeking, avoiding truncation if possible.
- Run local task_work for IOPOLL reaping when the ring is exiting.
This currently isn't done due to an assumption that polled IO will
never need task_work, but a fix on the block side is going to change
that.
* tag 'io_uring-6.16-20250614' of git://git.kernel.dk/linux:
io_uring: run local task_work from ring exit IOPOLL reaping
io_uring/kbuf: don't truncate end buffer for multiple buffer peeks
io_uring: consistently use rcu semantics with sqpoll thread
io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()
Pull Rust fix from Miguel Ojeda:
- 'hrtimer': fix future compile error when the 'impl_has_hr_timer!'
macro starts to get called
* tag 'rust-fixes-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: Fix compile error in impl_has_hr_timer macro
Pull misc fixes from Andrew Morton:
"9 hotfixes. 3 are cc:stable and the remainder address post-6.15 issues
or aren't considered necessary for -stable kernels. Only 4 are for MM"
* tag 'mm-hotfixes-stable-2025-06-13-21-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: add mmap_prepare() compatibility layer for nested file systems
init: fix build warnings about export.h
MAINTAINERS: add Barry as a THP reviewer
drivers/rapidio/rio_cm.c: prevent possible heap overwrite
mm: close theoretical race where stale TLB entries could linger
mm/vma: reset VMA iterator on commit_merge() OOM failure
docs: proc: update VmFlags documentation in smaps
scatterlist: fix extraneous '@'-sign kernel-doc notation
selftests/mm: skip failed memfd setups in gup_longterm
Pull SCSI fixes from James Bottomley:
"All fixes for drivers.
The core change in the error handler is simply to translate an ALUA
specific sense code into a retry the ALUA components can handle and
won't impact any other devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: error: alua: I/O errors for ALUA state transitions
scsi: storvsc: Increase the timeouts to storvsc_timeout
scsi: s390: zfcp: Ensure synchronous unit_add
scsi: iscsi: Fix incorrect error path labels for flashnode operations
scsi: mvsas: Fix typos in per-phy comments and SAS cmd port registers
scsi: core: ufs: Fix a hang in the error handler
Pull drm fixes from Dave Airlie:
"Quiet week, only two pull requests came my way, xe has a couple of
fixes and then a bunch of fixes across the board, vc4 probably fixes
the biggest problem:
vc4:
- Fix infinite EPROBE_DEFER loop in vc4 probing
amdxdna:
- Fix amdxdna firmware size
meson:
- modesetting fixes
sitronix:
- Kconfig fix for st7171-i2c
dma-buf:
- Fix -EBUSY WARN_ON_ONCE in dma-buf
udmabuf:
- Use dma_sync_sgtable_for_cpu in udmabuf
xe:
- Fix regression disallowing 64K SVM migration
- Use a bounce buffer for WA BB"
* tag 'drm-fixes-2025-06-14' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/lrc: Use a temporary buffer for WA BB
udmabuf: use sgtable-based scatterlist wrappers
dma-buf: fix compare in WARN_ON_ONCE
drm/sitronix: st7571-i2c: Select VIDEOMODE_HELPERS
drm/meson: fix more rounding issues with 59.94Hz modes
drm/meson: use vclk_freq instead of pixel_freq in debug print
drm/meson: fix debug log statement when setting the HDMI clocks
drm/vc4: fix infinite EPROBE_DEFER loop
drm/xe/svm: Fix regression disallowing 64K SVM migration
accel/amdxdna: Fix incorrect PSP firmware size
In preparation for needing to shift NVMe passthrough to always use
task_work for polled IO completions, ensure that those are suitably
run at exit time. See commit:
9ce6c9875f ("nvme: always punt polled uring_cmd end_io work to task_work")
for details on why that is necessary.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently NVMe uring_cmd completions will complete locally, if they are
polled. This is done because those completions are always invoked from
task context. And while that is true, there's no guarantee that it's
invoked under the right ring context, or even task. If someone does
NVMe passthrough via multiple threads and with a limited number of
poll queues, then ringA may find completions from ringB. For that case,
completing the request may not be sound.
Always just punt the passthrough completions via task_work, which will
redirect the completion, if needed.
Cc: stable@vger.kernel.org
Fixes: 585079b6e4 ("nvme: wire up async polling for io passthrough commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI APEI error injection driver failure that started to
occur after switching it over to using a faux device, address an EC
driver issue related to invalid ECDT tables, clean up the usage of
mwait_idle_with_hints() in the ACPI PAD driver, add a new IRQ override
quirk, and fix a NULL pointer dereference related to nosmp:
- Update the faux device handling code in the driver core and address
an ACPI APEI error injection driver failure that started to occur
after switching it over to using a faux device on top of that (Dan
Williams)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator
device) driver to match the function definition after recent
changes (Uros Bizjak)
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui)
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf)
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan)"
* tag 'acpi-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Use IRQ override on MACHENIKE 16P
ACPI: EC: Ignore ECDT tables with an invalid ID string
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
ACPI: PAD: Update arguments of mwait_idle_with_hints()
ACPI: APEI: EINJ: Do not fail einj_init() on faux_device_create() failure
driver core: faux: Quiet probe failures
driver core: faux: Suppress bind attributes
Pull power management fixes from Rafael Wysocki:
"These fix the cpupower utility installation, fix up the recently added
Rust abstractions for cpufreq and OPP, restore the x86 update
eliminating mwait_play_dead_cpuid_hint() that has been reverted during
the 6.16 merge window along with preventing the failure caused by it
from happening, and clean up mwait_idle_with_hints() usage in
intel_idle:
- Implement CpuId Rust abstraction and use it to fix doctest failure
related to the recently introduced cpumask abstraction (Viresh
Kumar)
- Do minor cleanups in the `# Safety` sections for cpufreq
abstractions added recently (Viresh Kumar)
- Unbreak cpupower systemd service units installation on some systems
by adding a unitdir variable for specifying the location to install
them (Francesco Poli)
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the 6.16 merge window due to a problem with
handling "dead" SMT siblings, but this time prevent leaving them in
C1 after initialization by taking them online and back offline when
a proper cpuidle driver for the platform has been registered
(Rafael Wysocki)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition after
recent changes (Uros Bizjak)"
* tag 'pm-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
rust: cpu: Add CpuId::current() to retrieve current CPU ID
rust: Use CpuId in place of raw CPU numbers
rust: cpu: Introduce CpuId abstraction
intel_idle: Update arguments of mwait_idle_with_hints()
cpufreq: Convert `/// SAFETY` lines to `# Safety` sections
cpupower: split unitdir from libdir in Makefile
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
Merge assorted ACPI updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator device)
driver to match the function definition after recent changes (Uros
Bizjak).
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui).
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf).
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan).
* acpi-pad:
ACPI: PAD: Update arguments of mwait_idle_with_hints()
* acpi-cppc:
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
* acpi-ec:
ACPI: EC: Ignore ECDT tables with an invalid ID string
* acpi-resource:
ACPI: resource: Use IRQ override on MACHENIKE 16P
Merge cpuidle updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition
after recent changes (Uros Bizjak).
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the merge window due to a problem with handling
"dead" SMT siblings, but this time prevent leaving them in C1 after
initialization by taking them online and back offline when a proper
cpuidle driver for the platform has been registered (Rafael Wysocki).
* pm-cpuidle:
intel_idle: Update arguments of mwait_idle_with_hints()
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
Merge a cpupower utility fix for 6.16-rc2 that unbreaks systemd service
units installation on some sysems (Francesco Poli).
* pm-tools:
cpupower: split unitdir from libdir in Makefile
