The RZ/G2L LCD controller is composed of Frame Compression Processor
(FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).
The DU module supports the following hardware features
− Display Parallel Interface (DPI) and MIPI LINK Video Interface
− Display timing master
− Generates video timings
− Selecting the polarity of output DCLK, HSYNC, VSYNC, and DE
− Supports Progressive
− Input data format (from VSPD): RGB888, RGB666
− Output data format: same as Input data format
− Supporting Full HD (1920 pixels x 1080 lines) for MIPI-DSI Output
− Supporting WXGA (1280 pixels x 800 lines) for Parallel Output
This patch documents the DU module found on RZ/G2L LCDC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240218164840.57662-2-biju.das.jz@bp.renesas.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Moved IRQ registration down to end of adv7511_probe().
If an IRQ already is pending during adv7511_probe
(before adv7511_cec_init) then cec_received_msg_ts
could crash using uninitialized data:
Unable to handle kernel read from unreadable memory at virtual address 00000000000003d5
Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP
Call trace:
cec_received_msg_ts+0x48/0x990 [cec]
adv7511_cec_irq_process+0x1cc/0x308 [adv7511]
adv7511_irq_process+0xd8/0x120 [adv7511]
adv7511_irq_handler+0x1c/0x30 [adv7511]
irq_thread_fn+0x30/0xa0
irq_thread+0x14c/0x238
kthread+0x190/0x1a8
Fixes: 3b1b975003 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Mads Bligaard Nielsen <bli@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219-adv7511-cec-irq-crash-fix-v2-1-245e53c4b96f@bang-olufsen.dk
The test kms_universal_plane@universal-plane-sanity fails on both SC7180
platforms. The drm/msm returns -ERANGE as it can not handle passet
scaling range, however the test is not ready to handle that. Mark the
test as failing until it is fixed.
ERROR - Igt error: (kms_universal_plane:1554) CRITICAL: Test assertion failure function sanity_test_pipe, file ../tests/kms_universal_plane.c:438:
ERROR - Igt error: (kms_universal_plane:1554) CRITICAL: Failed assertion: drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id, output->config.crtc->crtc_id, test.oversized_fb.fb_id, 0, 0, 0, mode->hdisplay + 100, mode->vdisplay + 100, IGT_FIXED(0,0), IGT_FIXED(0,0), IGT_FIXED(mode->hdisplay,0), IGT_FIXED(mode->vdisplay,0)) == expect
ERROR - Igt error: (kms_universal_plane:1554) CRITICAL: Last errno: 34, Numerical result out of range
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240218041204.2522828-3-dmitry.baryshkov@linaro.org
TI keystone display subsystem present in AM65, AM62 and AM62A SoC support
two separate register spaces namely "common" and "common1" which can be
used by two separate hosts to program the display controller as described
in respective Technical Reference Manuals [1].
The common1 register space has similar set of configuration registers as
supported in common register space except the global configuration
registers which are exclusive to common region.
This adds binding for "common1" register region too as supported by the
hardware.
[1]:
AM62x TRM:
https://www.ti.com/lit/pdf/spruiv7 (Section 14.8.9.1 DSS Registers)
AM65x TRM:
https://www.ti.com/lit/pdf/spruid7 (Section 12.6.5 DSS Registers)
AM62A TRM:
https://www.ti.com/lit/pdf/spruj16 (Section 14.9.9 Display Subsystem Registers)
Fixes: 2d8730f102 ("dt-bindings: display: ti,am65x-dss: Add dt-schema yaml binding")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216062426.4170528-2-devarsht@ti.com
The variable space is being initialized with a value that is never read,
it is being re-assigned later on. The initialization is redundant and
can be removed. Also merge two declaration lines together.
Cleans up clang scan build warning:
drivers/gpu/host1x/cdma.c:628:15: warning: Value stored to 'space'
during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215224301.2073845-1-colin.i.king@gmail.com
On ARM PCI systems, the PCI hierarchy might be reconfigured during
boot and the firmware framebuffer might move as a result of that.
The values in screen_info will then be invalid.
Work around this problem by tracking the framebuffer's initial
location before it get relocated; then fix the screen_info state
between reloaction and creating the firmware framebuffer's device.
This functionality has been lifted from efifb. See the commit message
of commit 55d728a40d ("efi/fb: Avoid reconfiguration of BAR that
covers the framebuffer") for more information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-8-tzimmermann@suse.de
Test if the firmware framebuffer's parent PCI device, if any, has
been enabled. If not, the firmware framebuffer is most likely not
working. Hence, do not create a device for the firmware framebuffer
on disabled PCI devices.
So far, efifb tracked the status of the PCI parent device internally
and did not bind if it was disabled. This patch implements the
functionality for all PCI-based firmware framebuffers.
v3:
* make commit message more precise (Sui)
v2:
* rework sysfb_pci_dev_is_enabled() (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-6-tzimmermann@suse.de
Set the firmware framebuffer's parent device, which usually is the
graphics hardware's physical device. Integrates the framebuffer in
the Linux device hierarchy and lets Linux handle dependencies among
devices. For example, the graphics hardware won't be suspended while
the firmware device is still active.
v4:
* fix build for CONFIG_SYSFB_SIMPLEFB=n, again
v3:
* fix build for CONFIG_SYSFB_SIMPLEFB=n (Sui)
* test result of screen_info_pci_dev() for errors (Sui)
v2:
* detect parent device in sysfb_parent_dev()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-4-tzimmermann@suse.de
The plain values as stored in struct screen_info need to be decoded
before being used. Add helpers that decode the type of video output
and the framebuffer I/O aperture.
Old or non-x86 systems may not set the type of video directly, but
only indicate the presence by storing 0x01 in orig_video_isVGA. The
decoding logic in screen_info_video_type() takes this into account.
It then follows similar code in vgacon's vgacon_startup() to detect
the video type from the given values.
A call to screen_info_resources() returns all known resources of the
given screen_info. The resources' values have been taken from existing
code in vgacon and vga16fb. These drivers can later be converted to
use the new interfaces.
v2:
* return ssize_t from screen_info_resources()
* don't call __screen_info_has_lfb() unnecessarily
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-2-tzimmermann@suse.de
The hdmi-connector nodes are now functional and the new way to model
hdmi ports nodes with both in and output port subnodes. Unfortunately
with the conversion to YAML the old method with only an input port node
was used. Later the new method was also added to the binding.
A binding must be unambiguously, so remove the old port property
entirely and make port@0 and port@1 a requirement as all
upstream dts files are updated as well and because checking
deprecated stuff is a bit pointless.
Update the example to avoid use of the removed property.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a493c65e-7cf9-455f-95d5-8c98cad35710@gmail.com
