The lan743x_ptp_io_event_cap_en() function checks that the given request
sets only one of PTP_RISING_EDGE or PTP_FALLING_EDGE, but not both.
However, this driver does not check whether other flags (such as
PTP_EXT_OFF) are set, nor whether any future unrecognized flags are set.
Fix this by adding the appropriate check to the lan743x_ptp_io_extts()
function.
Fixes: 60942c397a ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-3-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ravb_ptp_extts() function checks the flags coming from the
PTP_EXTTS_REQUEST ioctl, to ensure that future flags are not accepted on
accident.
This was updated to 'honor' the PTP_STRICT_FLAGS in commit 6138e687c7
("ptp: Introduce strict checking of external time stamp options.").
However, the driver does not *actually* validate the flags.
I originally fixed this driver to reject future flags in commit
592025a03b ("renesas: reject unsupported external timestamp flags"). It
is still unclear whether this hardware timestamps the rising, falling, or
both edges of the input signal.
Accepting requests with PTP_STRICT_FLAGS is a bug, as this could lead to
users mistakenly assuming a request with PTP_RISING_EDGE actually
timestamps the rising edge only.
Reject requests with PTP_STRICT_FLAGS (and hence all PTP_EXTTS_REQUEST2
requests) until someone with access to the datasheet or hardware knowledge
can confirm the timestamping behavior and update this driver.
Fixes: 6138e687c7 ("ptp: Introduce strict checking of external time stamp options.")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-2-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The igb_ptp_feature_enable_82580 function correctly checks that unknown
flags are not passed to the function. However, it does not actually check
PTP_RISING_EDGE or PTP_FALLING_EDGE when configuring the external timestamp
function.
The data sheet for the 82580 product says:
Upon a change in the input level of one of the SDP pins that was
configured to detect Time stamp events using the TSSDP register, a time
stamp of the system time is captured into one of the two auxiliary time
stamp registers (AUXSTMPL/H0 or AUXSTMPL/H1).
For example to define timestamping of events in the AUXSTMPL0 and
AUXSTMPH0 registers, Software should:
1. Set the TSSDP.AUX0_SDP_SEL field to select the SDP pin that detects
the level change and set the TSSDP.AUX0_TS_SDP_EN bit to 1.
2. Set the TSAUXC.EN_TS0 bit to 1 to enable timestamping
The same paragraph is in the i350 and i354 data sheets.
The wording implies that the time stamps are captured at any level change.
There does not appear to be any way to only timestamp one edge of the
signal.
Reject requests which do not set both PTP_RISING_EDGE and PTP_FALLING_EDGE
when operating under PTP_STRICT_FLAGS mode via PTP_EXTTS_REQUEST2.
Fixes: 38970eac41 ("igb: support EXTTS on 82580/i354/i350")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-1-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Gerhard Engleder says:
====================
Support loopback mode speed selection
Previously to commit 6ff3cddc36 ("net: phylib: do not disable autoneg
for fixed speeds >= 1G") it was possible to select the speed of the
loopback mode by configuring a fixed speed before enabling the loopback
mode. Now autoneg is always enabled for >= 1G and a fixed speed of >= 1G
requires successful autoneg. Thus, the speed of the loopback mode depends
on the link partner for >= 1G. There is no technical reason to depend on
the link partner for loopback mode. With this behavior the loopback mode
is less useful for testing.
Allow PHYs to support optional speed selection for the loopback mode.
This support is implemented for the generic loopback support and for PHY
drivers, which obviously support speed selection for loopback mode.
Additionally, loopback support according to the data sheet is added to
the KSZ9031 PHY.
Extend phy_loopback() to signal link up and down if speed changes,
because a new link speed requires link up signalling.
Use this loopback speed selection in the tsnep driver to select the
loopback mode speed depending the previously active speed. User space
tests with 100 Mbps and 1 Gbps loopback are possible again.
====================
Link: https://patch.msgid.link/20250312203010.47429-1-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
phy_loopback() leaves it to the PHY driver to select the speed of the
loopback mode. Thus, the speed of the loopback mode depends on the PHY
driver in use.
Add support for speed selection to phy_loopback() to enable loopback
with defined speeds. Ensure that link up is signaled if speed changes
as speed is not allowed to change during link up. Link down and up is
necessary for a new speed.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250312203010.47429-3-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PHY drivers support loopback mode, but it is not possible to select the
speed of the loopback mode. The speed is chosen by the set_loopback()
operation of the PHY driver. Same is valid for genphy_loopback().
There are PHYs that support loopback with different speeds. Extend
set_loopback() to make loopback speed selection possible.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-2-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to correctly identify the char array as "not a C string"
and thereby eliminate the warning:
In file included from ../drivers/net/ethernet/cadence/macb_main.c:42:
../drivers/net/ethernet/cadence/macb.h:1070:35: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
1070 | GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1050:24: note: in definition of macro 'GEM_STAT_TITLE_BITS'
1050 | .stat_string = title, \
| ^~~~~
../drivers/net/ethernet/cadence/macb.h:1070:9: note: in expansion of macro 'GEM_STAT_TITLE'
1070 | GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1097:35: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
1097 | GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1050:24: note: in definition of macro 'GEM_STAT_TITLE_BITS'
1050 | .stat_string = title, \
| ^~~~~
../drivers/net/ethernet/cadence/macb.h:1097:9: note: in expansion of macro 'GEM_STAT_TITLE'
1097 | GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~
Since these strings are copied with memcpy() they do not need to be
NUL terminated, and can use __nonstring:
memcpy(p, gem_statistics[i].stat_string,
ETH_GSTRING_LEN);
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312200700.make.521-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, netconsole has two methods of configuration - module
parameter and configfs. The former interface allows for netconsole
activation earlier during boot (by specifying the module parameter on
the kernel command line), so it is preferred for debugging issues which
arise before userspace is up/the configfs interface can be used. The
module parameter syntax requires specifying the egress interface name.
This requirement makes it hard to use for a couple reasons:
- The egress interface name can be hard or impossible to predict. For
example, installing a new network card in a system can change the
interface names assigned by the kernel.
- When constructing the module parameter, one may have trouble
determining the original (kernel-assigned) name of the interface
(which is the name that should be given to netconsole) if some stable
interface naming scheme is in effect. A human can usually look at
kernel logs to determine the original name, but this is very painful
if automation is constructing the parameter.
For these reasons, allow selection of the egress interface via MAC
address when configuring netconsole using the module parameter. Update
the netconsole documentation with an example of the new syntax.
Selection of egress interface by MAC address via configfs is far less
interesting (since when this interface can be used, one should be able
to easily convert between MAC address and interface name), so it is left
unimplemented.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-netconsole-v6-2-3437933e79b8@purestorage.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before tc's recent change to fix rounding errors, several tests which
specified a burst size of "1m" would translate back to being 1048574
bytes (2b less than 1Mb). sprint_size prints this as "1024Kb".
With the tc fix, the burst size is instead correctly reported as
1048576 bytes (precisely 1Mb), which sprint_size prints as "1Mb".
This updates the expected output in the tests' matchPattern values
to accept either the old or the new output.
Signed-off-by: Jonathan Lennox <jonathan.lennox@8x8.com>
Link: https://patch.msgid.link/20250312174804.313107-1-jonathan.lennox@8x8.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The DWMAC 1000 DMA capabilities register does not provide actual
FIFO sizes, nor does the driver really care. If they are not
provided via some other means, the driver will work fine, only
disallowing changing the MTU setting.
Provide the FIFO sizes through the driver's platform data to enable
MTU changes. The FIFO sizes are confirmed to be the same across RK3288,
RK3328, RK3399 and PX30, based on their respective manuals. It is
likely that Rockchip synthesized their DWMAC 1000 with the same
parameters on all their chips that have it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250312163426.2178314-1-wens@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tariq Toukan says:
====================
net/mlx5: HW Steering cleanups
This short series by Yevgeny contains several small HW Steering cleanups:
- Patch 1: removing unused FW commands
- Patch 2: using list_move() instead of list_del/add
- Patch 3: printing the unsupported combination of match fields
====================
Link: https://patch.msgid.link/1741780194-137519-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King says:
====================
net: stmmac: deprecate "snps,en-tx-lpi-clockgating" property
This series deprecates the "snps,en-tx-lpi-clockgating" property for
stmmac.
MII Transmit clock gating, where the MAC hardware supports gating this
clock, is a function of the connected PHY capabilities, which it
reports through its status register.
GMAC versions that support transmit clock gating twiddle the LPITCSE
bit accordingly in the LPI control/status register, which is handled
by the GMAC core specific code.
So, "snps,en-tx-lpi-clockgating" not something that is a GMAC property,
but is a work-around for phylib not providing an interface to determine
whether the PHY allows the transmit clock to be disabled.
This series converts the two SoCs that make use of this property (which,
I hasten to add, is set in the SoC code) to use the PHY capability bit
instead of a DT property, then removes the DT property from the .dtsi,
deprecates it in the snps,dwmac binding, and finally in the stmmac code.
I am expecting some discussion on how to merge this, as I think the
order in which these changes is made is important - we don't want to
deprecate the old way until the new code has landed.
====================
Link: https://patch.msgid.link/Z9FVHEf3uUqtKzyt@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
Therefore, snps,en-tx-lpi-clockgating is technically incorrect, and
this commit adds a warning should a DT be encountered with the property
present.
However, we keep backwards compatibility.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1tsIUK-005vGk-H7@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
Therefore, snps,en-tx-lpi-clockgating is technically incorrect, so this
commit deprecates the property in the binding.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIUF-005vGd-C5@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
As commit "net: stmmac: stm32: use PHY capability for TX clock stop"
adds the flag to use the PHY capability, remove the DT property that is
now unecessary.
Cc: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIUA-005vGX-8A@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
As commit "net: stmmac: starfive: use PHY capability for TX clock stop"
adds the flag to use the PHY capability, remove the DT property that is
now unecessary.
Cc: Samin Guo <samin.guo@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIU5-005vGR-4c@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
Add the flag to allow the stmmac core to use the PHY capability.
Cc: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIU0-005vGL-17@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
Add the flag to allow the stmmac core to use the PHY capability.
Cc: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsITu-005vGF-TM@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2025-03-10
An update from ieee802154 for your *net-next* tree:
Andy Shevchenko reworked the ca8210 driver to use the gpiod API and fixed
a few problems of the driver along the way.
* tag 'ieee802154-for-net-next-2025-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next:
dt-bindings: ieee802154: ca8210: Update polarity of the reset pin
ieee802154: ca8210: Switch to using gpiod API
ieee802154: ca8210: Get platform data via dev_get_platdata()
ieee802154: ca8210: Use proper setters and getters for bitwise types
====================
Link: https://patch.msgid.link/20250310185752.2683890-1-stefan@datenfreihafen.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King says:
====================
net: stmmac: remove unnecessary of_get_phy_mode() calls
This series removes unnecessary of_get_phy_mode() calls from the stmmac
glue drivers. stmmac_probe_config_dt() / devm_stmmac_probe_config_dt()
already gets the interface mode using device_get_phy_mode() and stores
it in plat_dat->phy_interface.
Therefore, glue drivers using of_get_phy_mode() are just duplicating
the work that has already been done.
This series adjusts the glue drivers to remove their usage of
of_get_phy_mode().
====================
Link: https://patch.msgid.link/Z9FQjQZb0IMaQJ9H@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
sun8i was using of_get_phy_mode() to set plat_dat->mac_interface, which
defaults to plat_dat->phy_interface when the mac-mode DT property is
not present. As nothing in arch/*/boot/dts sets the mac-mode property,
it is highly likely that these two will be identical, and thus there
is no need for this glue driver to set plat_dat->mac_interface.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGs-005v09-CD@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
Rearrange the initialisation order so we can pass plat_dat into
anarion_config_dt(), thereby providing plat_dat->phy_interface as
necessary there.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGS-005uzf-QE@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_in_quickack_mode() is called from input path for small packets.
It calls __sk_dst_get() which reads sk->sk_dst_cache which has been
put in sock_read_tx group (for good reasons).
Then dst_metric(dst, RTAX_QUICKACK) also needs extra cache line misses.
Cache RTAX_QUICKACK in icsk->icsk_ack.dst_quick_ack to no longer pull
these cache lines for the cases a delayed ACK is scheduled.
After this patch TCP receive path does not longer access sock_read_tx
group.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312083907.1931644-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet says:
====================
inet: frags: fully use RCU
While inet reassembly uses RCU, it is acquiring/releasing
a refcount on struct inet_frag_queue in fast path,
for no good reason.
This was mentioned in one patch changelog seven years ago :/
This series is removing these refcount changes, by extending
RCU sections.
====================
Link: https://patch.msgid.link/20250312082250.1803501-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the following patch, we no longer assume inet_frag_kill()
callers own a reference.
Consuming two refcounts from inet_frag_kill() would lead in UAF.
Propagate the pointer to the refs that will be consumed later
by the final inet_frag_putn() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250312082250.1803501-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-03-14
this is a pull request of 4 patches for net-next/main.
In the first 2 patches by Dimitri Fedrau add CAN transceiver support
to the flexcan driver.
Frank Li's patch adds i.MX94 support to the flexcan device tree
bindings.
The last patch is by Davide Caratti and adds protocol counter for
AF_CAN sockets.
linux-can-next-for-6.15-20250314
* tag 'linux-can-next-for-6.15-20250314' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: add protocol counter for AF_CAN sockets
dt-bindings: can: fsl,flexcan: add i.MX94 support
can: flexcan: add transceiver capabilities
dt-bindings: can: fsl,flexcan: add transceiver capabilities
====================
Link: https://patch.msgid.link/20250314132327.2905693-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
