Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
dmaengine driver and couple of new device support and few driver
changes:
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support"
* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
dmaengine: idxd: Remove unused pointer and macro
arm64: dts: renesas: r9a09g057: Add DMAC nodes
dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
dmaengine: sh: rz-dmac: Allow for multiple DMACs
irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
dmaengine: ti: Add NULL check in udma_probe()
fsldma: Set correct dma_mask based on hw capability
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
dmaengine: xilinx_dma: Set dma_device directions
dmaengine: tegra210-adma: Add Tegra264 support
dt-bindings: Document Tegra264 ADMA support
dmaengine: dw-edma: Add HDMA NATIVE map check
dmaegnine: fsl-edma: add edma error interrupt handler
dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
dmaengine: ARM_DMA350 should depend on ARM/ARM64
dt-bindings: dma: qcom,bam: Document dma-coherent property
dmaengine: Add Arm DMA-350 driver
...
Pull phy updates from Vinod Koul:
"As usual featuring couple of new driver and bunch of new device
support and some driver changes to Freescale, rockchip driver along
with couple of yaml binding conversions.
New Support:
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for
this support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
Updates:
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy"
* tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: tegra: p2u: Broaden architecture dependency
phy: rockchip: inno-usb2: Add usb2 phy support for rk3562
dt-bindings: phy: rockchip,inno-usb2phy: add rk3562
phy: rockchip: inno-usb2: add phy definition for rk3036
dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock
phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings
phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate
phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
phy: phy-snps-eusb2: add support for exynos2200
phy: phy-snps-eusb2: refactor reference clock init
phy: phy-snps-eusb2: make reset control optional
phy: phy-snps-eusb2: make repeater optional
phy: phy-snps-eusb2: split phy init code
phy: phy-snps-eusb2: refactor constructs names
phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
...
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and an Intel driver change:
- sdw_assign_device_num() logic simplification, using internal slave
id for irqs and optimizing computing of port params in specific
stream states
- Intel driver updates for ACE3+ microphone privacy status reporting
and enabling the status in HDA Intel driver"
* tag 'soundwire-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: only compute port params in specific stream states
ASoC: SOF: Intel: hda: Set the mic_privacy flag for soundwire with ACE3+
soundwire: intel: Add awareness of ACE3+ microphone privacy
soundwire: bus: Add internal slave ID and use for IRQs
soundwire: bus: Simplify sdw_assign_device_num()
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will
be checked, thus one can now easily catch errors when e.g. using
the '?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel'
crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>'
if 'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant 'len
<= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed
in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer'
to delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a
dependency for memory backing feature of the Rust null block
driver, which is waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the
Rust subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the
pointer passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time
check of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of
'assert_pinned!' (so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements"
* tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (78 commits)
rust: list: Fix typo `much` in arc.rs
rust: check type of `$ptr` in `container_of!`
rust: workqueue: remove HasWork::OFFSET
rust: retain pointer mut-ness in `container_of!`
Documentation: rust: testing: add docs on the new KUnit `#[test]` tests
Documentation: rust: rename `#[test]`s to "`rusttest` host tests"
rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s
rust: str: simplify KUnit tests `format!` macro
rust: str: convert `rusttest` tests into KUnit
rust: add `kunit_tests` to the prelude
rust: kunit: support checked `-> Result`s in KUnit `#[test]`s
rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s
rust: make section names plural
rust: list: fix path of `assert_pinned!`
rust: compile libcore with edition 2024 for 1.87+
rust: dma: add missing Markdown code span
rust: task: add missing Markdown code spans and intra-doc links
rust: pci: fix docs related to missing Markdown code spans
rust: alloc: add missing Markdown code span
rust: alloc: add missing Markdown code spans
...
Pull smb server updates from Steve French:
"Four smb3 server fixes:
- Fix for special character handling when mounting with "posix"
- Fix for mounts from Mac for fs that don't provide unique inode
numbers
- Two cleanup patches (e.g. for crypto calls)"
* tag '6.16-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: allow a filename to contain special characters on SMB3.1.1 posix extension
ksmbd: provide zero as a unique ID to the Mac client
ksmbd: remove unnecessary softdep on crc32
ksmbd: use SHA-256 library API instead of crypto_shash API
Pull more bcachefs updates from Kent Overstreet:
"More bcachefs updates:
- More stack usage improvements (~600 bytes)
- Define CLASS()es for some commonly used types, and convert most
rcu_read_lock() uses to the new lock guards
- New introspection:
- Superblock error counters are now available in sysfs:
previously, they were only visible with 'show-super', which
doesn't provide a live view
- New tracepoint, error_throw(), which is called any time we
return an error and start to unwind
- Repair
- check_fix_ptrs() can now repair btree node roots
- We can now repair when we've somehow ended up with the journal
using a superblock bucket
- Revert some leftovers from the aborted directory i_size feature,
and add repair code: some userspace programs (e.g. sshfs) were
getting confused
It seems in 6.15 there's a bug where i_nlink on the vfs inode has been
getting incorrectly set to 0, with some unfortunate results;
list_journal analysis showed bch2_inode_rm() being called (by
bch2_evict_inode()) when it clearly should not have been.
- bch2_inode_rm() now runs "should we be deleting this inode?" checks
that were previously only run when deleting unlinked inodes in
recovery
- check_subvol() was treating a dangling subvol (pointing to a
missing root inode) like a dangling dirent, and deleting it. This
was the really unfortunate one: check_subvol() will now recreate
the root inode if necessary
This took longer to debug than it should have, and we lost several
filesystems unnecessarily, because users have been ignoring the
release notes and blindly running 'fsck -y'. Debugging required
reconstructing what happened through analyzing the journal, when
ideally someone would have noticed 'hey, fsck is asking me if I want
to repair this: it usually doesn't, maybe I should run this in dry run
mode and check what's going on?'
As a reminder, fsck errors are being marked as autofix once we've
verified, in real world usage, that they're working correctly; blindly
running 'fsck -y' on an experimental filesystem is playing with fire
Up to this incident we've had an excellent track record of not losing
data, so let's try to learn from this one
This is a community effort, I wouldn't be able to get this done
without the help of all the people QAing and providing excellent bug
reports and feedback based on real world usage. But please don't
ignore advice and expect me to pick up the pieces
If an error isn't marked as autofix, and it /is/ happening in the
wild, that's also something I need to know about so we can check it
out and add it to the autofix list if repair looks good. I haven't
been getting those reports, and I should be; since we don't have any
sort of telemetry yet I am absolutely dependent on user reports
Now I'll be spending the weekend working on new repair code to see if
I can get a filesystem back for a user who didn't have backups"
* tag 'bcachefs-2025-06-04' of git://evilpiepirate.org/bcachefs: (69 commits)
bcachefs: add cond_resched() to handle_overwrites()
bcachefs: Make journal read log message a bit quieter
bcachefs: Fix subvol to missing root repair
bcachefs: Run may_delete_deleted_inode() checks in bch2_inode_rm()
bcachefs: delete dead code from may_delete_deleted_inode()
bcachefs: Add flags to subvolume_to_text()
bcachefs: Fix oops in btree_node_seq_matches()
bcachefs: Fix dirent_casefold_mismatch repair
bcachefs: Fix bch2_fsck_rename_dirent() for casefold
bcachefs: Redo bch2_dirent_init_name()
bcachefs: Fix -Wc23-extensions in bch2_check_dirents()
bcachefs: Run check_dirents second time if required
bcachefs: Run snapshot deletion out of system_long_wq
bcachefs: Make check_key_has_snapshot safer
bcachefs: BCH_RECOVERY_PASS_NO_RATELIMIT
bcachefs: bch2_require_recovery_pass()
bcachefs: bch_err_throw()
bcachefs: Repair code for directory i_size
bcachefs: Kill un-reverted directory i_size code
bcachefs: Delete redundant fsck_err()
...
Users seem to be assuming that the 'dropped unflushed entries' message
at the end of journal read indicates some sort of problem, when it does
not - we expect there to be entries in the journal that weren't
commited, it's purely informational so that we can correlate journal
sequence numbers elsewhere when debugging.
Shorten the log message a bit to hopefully make this clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug where the root inode of a subvolume was erronously deleted:
bch2_evict_inode() called bch2_inode_rm(), meaning the VFS inode's
i_nlink was somehow set to 0 when it shouldn't have - the inode in the
btree indicated it clearly was not unlinked.
This has been addressed with additional safety checks in
bch2_inode_rm() - pulling in the safety checks we already were doing
when deleting unlinked inodes in recovery - but the really disastrous
bug was in check_subvols(), which on finding a dangling subvol (subvol
with a missing root inode) would delete the subvolume.
I assume this bug dates from early check_directory_structure() code,
which originally handled subvolumes and normal paths - the idea being
that still live contents of the subvolume would get reattached
somewhere.
But that's incorrect, and disastrously so; deleting a subvolume triggers
deleting the snapshot ID it points to, deleting the entire contents.
The correct way to repair is to recreate the root inode if it's missing;
then any contents will get reattached under that subvolume's lost+found.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug where bch2_evict_inode() incorrectly called bch2_inode_rm()
- the journal clearly showed the inode was not unlinked.
We've got checks that we use in recovery when cleaning up deleted
inodes, lift them to bch2_inode_rm() as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_update_nodes_written() needs to wait on in-flight writes to old
nodes before marking them as freed. But it has no reason to pin those
old nodes in memory, so some trickyness ensues.
The update we're completing deleted references to those nodes from the
btree, so we know if they've been evicted they can't be pulled back in.
We just have to check if the nodes we have pointers to are still those
old nodes, and haven't been reused.
To do that we check the node's "sequence number" (actually a random 64
bit cookie), but that lives in the node's data buffer. 'struct btree'
can't be freed until filesystem shutdown (as they're quite small), but
the data buffers can be freed or swapped around.
Commit 1f88c35674, which was fixing a kmsan warning, assumed that we
could safely do this locklessly with just a READ_ONCE() - if we've got a
non-null ptr it would be safe to read from.
But that's not true if the data buffer is a vmalloc allocation, so we
need to restore the locking that commit deleted (or alternatively RCU
free those data buffers, but there's no other reason for that).
Fixes: 1f88c35674 ("bcachefs: Fix a KMSAN splat in btree_update_nodes_written()")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Instead of simply recreating a mis-casefolded dirent, use the str_hash
repair code, which will rename it if necessary - the dirent might have
been created again with the correct casefolding.
Factor out out bch2_str_hash_repair key() from
__bch2_str_hash_check_key() for the new path to use, and export
bch2_dirent_create_key() as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_fsck_renamed_dirent was creating bch_dirent keys open-coded - but
we need to use the appropriate helper, if the directory is casefolded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Redo (and simplify somewhat) how casefolded and non casefolded dirents
are initialized, and export this to be used by fsck_rename_dirent().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Clang warns (or errors with CONFIG_WERROR=y):
fs/bcachefs/fsck.c:2325:2: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
2325 | int ret = bch2_trans_run(c,
| ^
On clang-17 and older, this is an unconditional error:
fs/bcachefs/fsck.c:2325:2: error: expected expression
2325 | int ret = bch2_trans_run(c,
| ^
Move the declaration of ret to the top of the function to resolve both
ways this issue manifests.
Fixes: c72def5237 ("bcachefs: Run check_dirents second time if required")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull sched_ext fixes from Tejun Heo:
"Two fixes in the built-in idle selection helpers:
- Fix prev_cpu handling to guarantee that idle selection never
returns a CPU that's not allowed
- Skip cross-node search when !NUMA which could lead to infinite
looping due to a bug in NUMA iterator"
* tag 'sched_ext-for-6.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Skip cross-node search with !CONFIG_NUMA
sched_ext: idle: Properly handle invalid prev_cpu during idle selection
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
Pull slab updates from Vlastimil Babka:
- Make kvmalloc() more suitable for callers that need it to succeed,
but without unnecessary overhead by reclaim and compaction to get a
physically contiguous allocation.
Instead fall back to vmalloc() more easily by default, unless
instructed by __GFP_RETRY_MAYFAIL to prefer kmalloc() harder. This
should allow the removal of a xfs-specific workaround (Michal Hocko)
- Remove potentially excessive warnings due to memory pressure when
allocating structures for per-object allocation profiling metadata
(Usama Arif)
* tag 'slab-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: slub: only warn once when allocating slab obj extensions fails
mm: kvmalloc: make kmalloc fast path real fast path
Pull LICENSES update from Greg KH:
"Here is a single patch to the LICENSES/ directory to add the CC0
license that is currently used in the kcpuid x86 tool for one of their
files.
This fixes the error that spdxcheck.py currently has with the kcpuid
file due to a missing LICENSE file for this specific license"
* tag 'spdx-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
LICENSES: add CC0-1.0 license text
- Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM
is enabled, since there are no other entries (Hans Zhang)
* pci/controller/tegra194:
PCI: tegra194: Create debugfs directory only when CONFIG_PCIEASPM is enabled
- Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert()
deasserts in reverse order, to fix a link training regression (Jensen
Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel)
* pci/controller/rockchip:
PCI: rockchip-ep: Mark RK3399 as intx_capable
PCI: rockchip: Fix order of rockchip_pci_core_rsts
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
* pci/controller/rcar-gen4:
PCI: rcar-gen4: Document how to obtain platform firmware
PCI: rcar-gen4: set ep BAR4 fixed size
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT lacks
'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32,
and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
* pci/controller/qcom:
PCI: qcom: Add support for IPQ5018
dt-bindings: PCI: qcom: Add IPQ5018 SoC
PCI: dwc: Add support for configuring lane equalization presets
PCI: Add lane equalization register offsets
PCI: dwc: Update pci->num_lanes to maximum supported link width
PCI: of: Add of_pci_get_equalization_presets() API
- Use for_each_of_range() iterator for parsing 'ranges' (Rob Herring)
* pci/controller/mvebu:
PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard
Zhu)
- Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link();
since the DWC core does this, imx6 only needs it when retraining for a
faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some
cases, the controller can't exit 'L23 Ready' through Beacon or PERST#
deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s,
causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Save and restore the LUT setting during suspend/resume for i.MX95 SoC
PCI: imx6: Add PLL lock check for i.MX95 SoC
PCI: imx6: Add workaround for errata ERR051586
PCI: imx6: Add workaround for errata ERR051624
PCI: imx6: Toggle the core reset for i.MX95 PCIe
PCI: imx6: Call dw_pcie_wait_for_link() from start_link() callback only when required
PCI: imx6: Skip link up workaround for newer platforms
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more
robust; this will not affect the intended link width if all lanes are
functional (Wenbin Yao)
* pci/controller/dwc:
PCI: dwc: Make link training more robust by setting PORT_LOGIC_LINK_WIDTH to one lane
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the link
is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root
Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of
rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets
non-sticky registers (Shawn Lin)
- Remove unused PCIE_CLIENT_GENERAL_DEBUG definition (Hans Zhang)
- Organize register and bitfield definitions logically (Hans Zhang)
- Use rockchip_pcie_link_up() to check link up instead of open coding, and
use GENMASK() and FIELD_GET() when possible (Hans Zhang)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up() and
armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin,
meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti
(Hans Zhang)
- Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and
layerscape-gen4, mobiveil (Hans Zhang)
- Simplify j721e link-up check (Hans Zhang)
- Convert pci-host-common to a library so platforms that don't need native
host controller drivers don't need to include these helper functions
(Manivannan Sadhasivam)
* pci/controller/dw-rockchip:
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI: cadence: Simplify J721e link status check
PCI: mobiveil: Return bool from link up check
PCI: dwc: Return bool from link up check
PCI: dw-rockchip: Fix PHY function call sequence in rockchip_pcie_phy_deinit()
PCI: dw-rockchip: Use rockchip_pcie_link_up() to check link up instead of open coding
PCI: dw-rockchip: Reorganize register and bitfield definitions
PCI: dw-rockchip: Remove unused PCIE_CLIENT_GENERAL_DEBUG definition
PCI: dw-rockchip: Move rockchip_pcie_ep_hide_broken_ats_cap_rk3588() to dw_pcie_ep_ops::init()
PCI: dw-rockchip: Enable ASPM L0s capability for both RC and EP modes
PCI: dw-rockchip: Remove PCIE_L0S_ENTRY check from rockchip_pcie_link_up()
# Conflicts:
# drivers/pci/controller/pcie-apple.c
# include/linux/pci-ecam.h
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans
Zhang)
- Use shared PCIE_MSG_CODE_* definitions and remove duplicate
cdns_pcie_msg_code definitions (Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures in
some configs (Arnd Bergmann)
* pci/controller/cadence:
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
PCI: cadence: Remove duplicate message code definitions
PCI: cadence: Fix runtime atomic count underflow
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying
capabilities (Marc Zyngier)
- Directly set/clear INTx mask bits because T602x dropped the accessors
that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate T602x,
which moves them around; retain default offsets for existing DTs that
lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe because
we're allowed to sleep there (Hector Martin)
- Move register offsets into SoC-specific structure (Hector Martin)
- Add T602x PCIe support (Hector Martin)
* pci/controller/apple:
PCI: apple: Add T602x PCIe support
PCI: apple: Abstract register offsets via a SoC-specific structure
PCI: apple: Use gpiod_set_value_cansleep in probe flow
PCI: apple: Drop poll for CORE_RC_PHYIF_STAT_REFCLK
PCI: apple: Move port PHY registers to their own reg items
PCI: apple: Fix missing OF node reference in apple_pcie_setup_port
PCI: apple: Move away from INTMSK{SET,CLR} for INTx and private interrupts
PCI: apple: Dynamically allocate RID-to_SID bitmap
PCI: apple: Move over to standalone probing
PCI: ecam: Allow cfg->priv to be pre-populated from the root port device
PCI: host-generic: Extract an ECAM bridge creation helper from pci_host_common_probe()
dt-bindings: pci: apple,pcie: Add t6020 compatible string
PCI: apple: Set only available ports up
- For fixed-size BARs, retain both the actual size and the possibly larger
size allocated to accommodate iATU alignment requirements (Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space than
needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint
controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
PCI: dwc: ep: Correct PBA offset in .set_msix() callback
PCI: endpoint: pci-epf-vntb: Simplify ctrl/SPAD space allocation
PCI: endpoint: Retain fixed-size BAR size as well as aligned size
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS but
don't allow peer-to-peer transactions between Root Ports; the quirk
allows each Root Port to be in a separate IOMMU group (Huacai Chen)
* pci/virtualization:
PCI: Add ACS quirk for Loongson PCIe
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the
filename paths. Retain old deprecated symbols for compatibility, except
for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian Norris)
* pci/pwrctrl:
arm64: Kconfig: switch to HAVE_PWRCTRL
wifi: ath12k: switch to PCI_PWRCTRL_PWRSEQ
wifi: ath11k: switch to PCI_PWRCTRL_PWRSEQ
PCI/pwrctrl: Rename pwrctrl Kconfig symbols and slot module
PCI/pwrctrl: Cancel outstanding rescan work when unregistering
- Add pm_runtime_put() cleanup helper for use with __free() to
automatically drop the device usage count when a pointer goes out of
scope (Alex Williamson)
- Increment PM usage counter when probing reset methods so we don't try to
read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
* pci/pm:
PCI: Explicitly put devices into D0 when initializing
PCI: Increment PM usage counter when probing reset methods
PM: runtime: Define pm_runtime_put cleanup helper
- Fix pci_acpi_scan_root() memory leak when we fail to create a PCI bus
(Zhe Qiao)
* pci/pci-acpi:
PCI/ACPI: Fix allocated memory release on error in pci_acpi_scan_root()
- Ignore Presence Detect Changed caused by DPC. pciehp already ignores
Link Down/Up events caused by DPC, but on slots using in-band presence
detect, DPC causes a spurious Presence Detect Changed event (Lukas
Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports
using in-band presence detect, the reset causes a Presence Detect Changed
event, which mistakenly caused teardown and re-enumeration of the device.
Drivers may need to annotate code that resets their device (Lukas Wunner)
* pci/hotplug:
PCI: hotplug: Drop superfluous #include directives
PCI: pciehp: Ignore Link Down/Up caused by Secondary Bus Reset
PCI: pciehp: Ignore Presence Detect Changed caused by DPC
# Conflicts:
# drivers/pci/pci.h
- Remove pci_fixup_cardbus(), which has no users left (Heiner Kallweit)
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and has
been fixed by other commits (Lukas Wunner)
- Restrict visibility of pci_dev.match_driver since it's no longer used
outside the PCI core (Lukas Wunner)
* pci/enumeration:
PCI: Limit visibility of match_driver flag to PCI core
Revert "iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices"
PCI: Print the actual delay time in pci_bridge_wait_for_secondary_bus()
PCI: Use PCI_STD_NUM_BARS instead of 6
PCI: Remove pci_fixup_cardbus()
# Conflicts:
# drivers/pci/pci.h
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and
unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and
related flags since all uses have been removed (Philipp Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid', i.e.,
their behavior no longer depends on whether pcim_enable_device or
pci_enable_device() was used, and remove related code (Philipp Stanner)
* pci/devres:
PCI: Remove function pcim_intx() prototype from pci.h
PCI: Remove hybrid-devres usage warnings from kernel-doc
PCI: Remove redundant set of request functions
PCI: Remove exclusive requests flags from _pcim_request_region()
PCI: Remove pcim_request_region_exclusive()
Documentation/driver-api: Update pcim_enable_device()
PCI: Remove hybrid devres nature from request functions
PCI: Remove pcim_iounmap_regions()
mtip32xx: Remove unnecessary pcim_iounmap_regions() calls
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag
(Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may have
changed (Ilpo Järvinen)
* pci/bwctrl:
PCI: Update Link Speed after retraining
PCI/bwctrl: Replace lbms_count with PCI_LINK_LBMS_SEEN flag
- Initialize struct aer_err_info before using it to avoid depending on
stack garbage (Bjorn Helgaas)
- Log the DPC Error Source ID only when it's actually valid (when ERR_FATAL
or ERR_NONFATAL was received from a downstream device) and decode into
bus/device/function (Bjorn Helgaas)
- Consolidate AER Error Source ID in one place for message consistency
(Bjorn Helgaas)
- Update statistics and emit trace events early in AER logging paths,
before any potential ratelimiting (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages use the
same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable Errors.
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and RCU
stall warnings (Jon Pan-Doh)
* pci/aer:
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI/AER: Add sysfs attributes for log ratelimits
PCI/AER: Add ratelimits to PCI AER Documentation
PCI/AER: Ratelimit correctable and non-fatal error logging
PCI/AER: Simplify add_error_device()
PCI/AER: Convert aer_get_device_error_info(), aer_print_error() to index
PCI/AER: Rename struct aer_stats to aer_info
PCI/AER: Reduce pci_print_aer() correctable error level to KERN_WARNING
PCI/ERR: Add printk level to pcie_print_tlp_log()
PCI/AER: Check log level once and remember it
PCI/AER: Trace error event before ratelimiting
PCI/AER: Update statistics before ratelimiting
PCI/AER: Simplify pci_print_aer()
PCI/AER: Initialize aer_err_info before using it
PCI/AER: Move aer_print_source() earlier in file
PCI/AER: Rename aer_print_port_info() to aer_print_source()
PCI/AER: Extract bus/dev/fn in aer_print_port_info() with PCI_BUS_NUM(), etc
PCI/AER: Consolidate Error Source ID logging in aer_isr_one_error_type()
PCI/AER: Factor COR/UNCOR error handling out from aer_isr_one_error()
PCI/DPC: Log Error Source ID only when valid
PCI/DPC: Initialize aer_err_info before using it
When CONFIG_SHMEM is not set, the following compiler error occurs:
ld: vmlinux.o: in function `ttm_backup_backup_page':
(.text+0x10363bc): undefined reference to `shmem_writeout'
make[3]: *** [/work/build/trace/nobackup/linux.git/scripts/Makefile.vmlinux:91: vmlinux.unstripped] Error 1
This is due to the replacement of writepage and calling swap_writeout()
and shmem_writeout() directly. The issue is that when CONFIG_SHMEM is
not defined, shmem_writeout() is also not defined.
The function ttm_backup_backup_page() called mapping->a_ops->writepage()
which was then changed to call shmem_writeout() directly.
Even before commit 84798514db ("mm: Remove swap_writepage() and
shmem_writepage()"), it didn't make sense to call anything other than
shmem_writeout() as the ttm_backup deals only with shmem folios.
Have DRM_TTM config option select SHMEM to guarantee that
shmem_writeout() is available.
Link: https://lore.kernel.org/all/20250602170500.48713a2b@gandalf.local.home/
Suggested-by: Hugh Dickins <hughd@google.com>
Fixes: 84798514db ("mm: Remove swap_writepage() and shmem_writepage()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
