Resctrl selftest prints a message on test failure that Sub-Numa
Clustering (SNC) could be enabled and points the user to check their BIOS
settings. No actual check is performed before printing that message so
it is not very accurate in pinpointing a problem.
When there is SNC support for kernel's resctrl subsystem and SNC is
enabled then sub node files are created for each node in the resctrlfs.
The sub node files exist in each regular node's L3 monitoring directory.
The reliable path to check for existence of sub node files is
/sys/fs/resctrl/mon_data/mon_L3_00/mon_sub_L3_00.
Add helper that checks for mon_sub_L3_00 existence.
Correct old messages to account for kernel support of SNC in
resctrl.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Sub-NUMA Cluster divides CPUs sharing an L3 cache into separate NUMA
nodes. Systems may support splitting into either two, three, four or six
nodes. When SNC mode is enabled the effective amount of L3 cache
available for allocation is divided by the number of nodes per L3.
It's possible to detect which SNC mode is active by comparing the number
of CPUs that share a cache with CPU0, with the number of CPUs on node0.
Detect SNC mode once and let other tests inherit that information.
Update CFLAGS after including lib.mk in the Makefile so that fallthrough
macro can be used.
To check if SNC detection is reliable one can check the
/sys/devices/system/cpu/offline file. If it's empty, it means all cores
are operational and the ratio should be calculated correctly. If it has
any contents, it means the detected SNC mode can't be trusted and should
be disabled.
Check if detection was not reliable due to offline cpus. If it was skip
running tests since the results couldn't be trusted.
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Replace direct error handling with 'ksft_test_result_*'
macros for better reporting.
Test logs:
Before change:
- Without root
error: unshare, errno 1
- With root
No, output
After change:
- Without root
TAP version 13
1..1
ok 2 # SKIP This test needs root to run!
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
- With root
TAP version 13
1..1
ok 1 Test : Success
Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lore.kernel.org/r/20250105085255.124929-3-cvam0000@gmail.com
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add 'ksft_exit_skip()', if not run as root, with an appropriate
Warning.
Add 'ksft_print_header()' and 'ksft_set_plan()' to structure test
outputs more effectively.
Test logs:
Before Change:
- Without root
error: unshare, errno 1
- With root
No, output
After change:
- Without root
TAP version 13
1..1
ok 2 # SKIP This test needs root to run!
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
- With root
TAP version 13
1..1
Link: https://lore.kernel.org/r/20250105085255.124929-2-cvam0000@gmail.com
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
intptr_t and uintptr_t are not big enough types on 32-bit architectures
when printing 64-bit values, resulting to the following incorrect
diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (3134324433)
Replace intptr_t and uintptr_t with intmax_t and uintmax_t, respectively.
With this fix, the same test produces more usable diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753)
Link: https://lore.kernel.org/r/20250108170757.GA6723@strace.io
Fixes: b5bb6d3068 ("selftests/seccomp: fix 32-bit build warnings")
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the selftest is not running as root, it should skip not
fail and give an appropriate warning to the user. This patch adds
ksft_exit_skip() if the test is not running as root.
Logs:
Before change:
TAP version 13
1..1
ok 1 # SKIP This test needs root to run!
After change:
TAP version 13
1..1
ok 2 # SKIP This test needs root to run!
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
Link: https://lore.kernel.org/r/20241210123212.332050-1-cvam0000@gmail.com
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The functions ksft_test_result_pass, ksft_test_result_fail,
ksft_test_result_xfail, and ksft_test_result_skip already exist and are
available for use in selftests, but no XPASS equivalent is
available.
This adds a new function to that family that outputs XPASS, so that it's
available for future test writers.
Link: https://lore.kernel.org/r/20241207012325.56611-1-me@steffo.eu
Signed-off-by: Stefano Pigozzi <me@steffo.eu>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use KVM or HVF if supported by the QEMU binary and available on the
system.
This produces a nice improvement on my Apple M3 Pro running macOS 14.7:
Before:
./tools/testing/kunit/kunit.py exec --arch arm64
[HH:MM:SS] Elapsed time: 10.145s
After:
./tools/testing/kunit/kunit.py exec --arch arm64
[HH:MM:SS] Elapsed time: 1.773s
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Python 3.13 added os.process_cpu_count as a cross-platform alternative
for the Linux-only os.sched_getaffinity. Use it when it's available and
provide a fallback when it's not.
This allows kunit to run on macOS.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The disconnect test-case generates spurious errors:
INFO: disconnect
INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI
01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL]
file received by server does not match (in, out):
Unexpected revents: POLLERR/POLLNVAL(19)
-rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect
Trailing bytes are:
��\����R���!8��u2��5N%
-rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1
Trailing bytes are:
��\����R���!8��u2��5N%
02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ]
03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ]
04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ]
[FAIL] Tests of the full disconnection have failed
Time: 2 seconds
The root cause is actually in the user-space bits: the test program
currently disconnects as soon as all the pending data has been spooled,
generating an FASTCLOSE. If such option reaches the peer before the
latter has reached the closed status, the msk socket will report an
error to the user-space, as per protocol specification, causing the
above failure.
Address the issue explicitly waiting for all the relevant sockets to
reach a closed status before performing the disconnect.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-3-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for OpenRISC in the rseq selftests. OpenRISC is 32-bit
only.
Tested this with:
Compiler: gcc version 14.2.0 (GCC)
Binutils: GNU assembler version 2.43.1 (or1k-smh-linux-gnu) using BFD version (GNU Binutils) 2.43.1.20241207
Linux: Linux buildroot 6.13.0-rc2-00005-g1fa73dd6c2d3-dirty #213 SMP Sat Dec 28 22:18:39 GMT 2024 openrisc GNU/Linux
Glibc: 2024-12-13 e4e49583d9 Stafford Horne or1k: Update libm-test-ulps
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Patch series "pkeys kselftests improvements".
This series brings various cleanups and fixes for the mm (mostly pkeys)
kselftests. The original goal was to make the pkeys tests work out of the
box and without build warning - it turned out to be more involved than
expected.
The most important change is enabling -O2 when building all mm kselftests
(patch 5). This is actually needed for the pkeys tests to run
successfully (see gcc command line at the top of protection_keys.c and
pkey_sighandler_tests.c), and seems to have no negative impact on the
other tests. It certainly can't hurt performance!
The following patches address a few obvious issues in the pkeys tests
(unused code, bad scope for functions/variables, etc.) and finally make a
couple of small improvements.
There is one ugliness that this series does not fix: some functions in
pkey-<arch>.h call functions that are actually defined in
protection_keys.c. For instance, expect_fault_on_read_execonly_key() in
pkey-x86.h calls expected_pkey_fault(). This means that other test
programs that use pkey-helpers.h (namely pkey_sighandler_tests) would fail
to link if they called such functions defined in pkey-<arch>.h. Fixing
this would require a more comprehensive reorganisation of the pkey-*
headers, which doesn't seem worth it (patch 9 adds a comment to
pkey-helpers.h to clarify the situation).
Some more details on the patches:
- Patch 1 is an unrelated fix that was revealed by inspecting a warning.
It seems fairly harmless though, so I thought I'd just post it as part
of this series.
- Patch 2-5 fix various warnings that come up by building the mm tests
at -O2 and finally enable -O2.
- Patch 6-12 are various cleanups for the pkeys tests. Patch 11 in
particular enables is_pkeys_supported() to be called from outside
protection_keys.c (patch 13 relies on this).
- Patch 13-14 are small improvements to pkey_sighandler_tests.c.
Many thanks to Ryan Roberts for checking that the mm tests still run fine
on arm64 with those patches applied. I've also checked that the pkeys
tests run fine on arm64 and x86.
This patch (of 14):
area_src and area_dst are saved at the beginning of the function if
chunk_size > page_size. The intention is quite clearly to restore them at
the end based on the same condition, but step_size is considered instead
of chunk_size. Considering that step_size is a number of pages, the
condition is likely to be false.
Use the same condition as when saving so that the globals are restored as
intended.
Link: https://lkml.kernel.org/r/20241209095019.1732120-1-kevin.brodsky@arm.com
Link: https://lkml.kernel.org/r/20241209095019.1732120-2-kevin.brodsky@arm.com
Fixes: a2bf6a9ca8 ("selftests/mm: add UFFDIO_MOVE ioctl test")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Keith Lucas <keith.lucas@oracle.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftest/mm: Remove warnings found by adding compiler flags".
Recently, I reviewed a patch on the mm/kselftest mailing list about a test
which had obvious type mismatch fix in it. It was strange why that wasn't
caught during development and when patch was accepted. This led me to
discover that those extra compiler options to catch these warnings aren't
being used. When I added them, I found tens of warnings in just mm suite.
In this series, I'm fixing those warnings in a few files. More fixes will
be sent later.
This patch (of 4):
Remove cost from the return type as it is ignored anyways and generates
the warning:
warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
Link: https://lkml.kernel.org/r/20241209185624.2245158-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20241209185624.2245158-2-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/vma: make more mmap logic userland testable".
This series carries on the work started in previous series and
continued in commit 52956b0d7f ("mm: isolate mmap internal logic to
mm/vma.c"), moving the remainder of memory mapping implementation
details logic into mm/vma.c allowing the bulk of the mapping logic to
be unit tested.
It is highly useful to do so, as this means we can both fundamentally test
this core logic, and introduce regression tests to ensure any issues
previously resolved do not recur.
Vitally, this includes the do_brk_flags() function, meaning we have both
core means of userland mapping memory now testable.
Performance testing was performed after this change given the brk() system
call's sensitivity to change, and no performance regression was observed.
The stack expansion logic is also moved into mm/vma.c, which necessitates
a change in the API exposed to the exec code, removing the invocation of
the expand_downwards() function used in get_arg_page() and instead adding
mmap_read_lock_maybe_expand() to wrap this.
This patch (of 5):
Now we have moved mmap_region() internals to mm/vma.c, making it available
to userland testing, it makes sense to do the same with brk().
This continues the pattern of VMA heavy lifting being done in mm/vma.c in
an environment where it can be subject to straightforward unit and
regression testing, with other VMA-adjacent files becoming wrappers around
this functionality.
[lorenzo.stoakes@oracle.com: add missing personality header import]
Link: https://lkml.kernel.org/r/2a717265-985f-45eb-9257-8b2857088ed4@lucifer.local
Link: https://lkml.kernel.org/r/cover.1733248985.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/3d24b9e67bb0261539ca921d1188a10a1b4d4357.1733248985.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
