Pull execve updates from Kees Cook:
- fix up /proc/pid/comm in the execveat(AT_EMPTY_PATH) case (Tycho
Andersen, Kees Cook)
- binfmt_misc: Fix comment typos (Christophe JAILLET)
- move empty argv[0] warning closer to actual logic (Nir Lichtman)
- remove legacy custom binfmt modules autoloading (Nir Lichtman)
- Make sure set_task_comm() always NUL-terminates
- binfmt_flat: Fix integer overflow bug on 32 bit systems (Dan
Carpenter)
- coredump: Do not lock when copying "comm"
- MAINTAINERS: add auxvec.h and set myself as maintainer
* tag 'execve-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_flat: Fix integer overflow bug on 32 bit systems
selftests/exec: add a test for execveat()'s comm
exec: fix up /proc/pid/comm in the execveat(AT_EMPTY_PATH) case
exec: Make sure task->comm is always NUL-terminated
exec: remove legacy custom binfmt modules autoloading
exec: move warning of null argv to be next to the relevant code
fs: binfmt: Fix a typo
MAINTAINERS: exec: Mark Kees as maintainer
MAINTAINERS: exec: Add auxvec.h UAPI
coredump: Do not lock during 'comm' reporting
Merge cpupower utility updates for 6.14:
- Fix TSC MHz calculation in cpupower (He Rongguang).
- Add install and uninstall options to bindings Makefile and add header
changes for cpufreq.h to SWIG bindings in cpupower (John B. Wyatt IV).
- Add missing residency header changes in cpuidle.h to SWIG bindings in
cpupower (John B. Wyatt IV).
- Add output files to .gitignore and clean them up in "make clean" in
selftests/cpufreq (Li Zhijian).
- Fix cross-compilation in cpupower Makefile (Peng Fan).
- Revise the is_valid flag handling for idle_monitor in the cpupower
utility (wangfushuai).
- Extend and clean up AMD processors support in cpupower (Mario
Limonciello).
* pm-tools:
pm: cpupower: Add missing residency header changes in cpuidle.h to SWIG
pm: cpupower: Add header changes for cpufreq.h to SWIG bindings
pm: cpupower: Add install and uninstall options to bindings makefile
cpupower: Adjust whitespace for amd-pstate specific prints
cpupower: Don't fetch maximum latency when EPP is enabled
cpupower: Add support for showing energy performance preference
cpupower: Don't try to read frequency from hardware when kernel uses aperfmperf
cpupower: Add support for amd-pstate preferred core rankings
cpupower: Add support for parsing 'enabled' or 'disabled' strings from table
cpupower: Remove spurious return statement
cpupower: fix TSC MHz calculation
cpupower: revise is_valid flag handling for idle_monitor
pm: cpupower: Makefile: Fix cross compilation
selftests/cpufreq: gitignore output files and clean them in make clean
Address Null pointer dereference / undefined behavior in rtattr_pack
(note that size is 0 in the bad case).
Flagged by cppcheck as:
tools/testing/selftests/net/ipsec.c:230:25: warning: Possible null pointer
dereference: payload [nullPointer]
memcpy(RTA_DATA(attr), payload, size);
^
tools/testing/selftests/net/ipsec.c:1618:54: note: Calling function 'rtattr_pack',
4th argument 'NULL' value is 0
if (rtattr_pack(&req.nh, sizeof(req), XFRMA_IF_ID, NULL, 0)) {
^
tools/testing/selftests/net/ipsec.c:230:25: note: Null pointer dereference
memcpy(RTA_DATA(attr), payload, size);
^
Signed-off-by: Liu Ye <liuye@kylinos.cn>
Link: https://patch.msgid.link/20250116013037.29470-1-liuye@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull vfs mount updates from Christian Brauner:
- Add a mountinfo program to demonstrate statmount()/listmount()
Add a new "mountinfo" sample userland program that demonstrates how
to use statmount() and listmount() to get at the same info that
/proc/pid/mountinfo provides
- Remove pointless nospec.h include
- Prepend statmount.mnt_opts string with security_sb_mnt_opts()
Currently these mount options aren't accessible via statmount()
- Add new mount namespaces to mount namespace rbtree outside of the
namespace semaphore
- Lockless mount namespace lookup
Currently we take the read lock when looking for a mount namespace to
list mounts in. We can make this lockless. The simple search case can
just use a sequence counter to detect concurrent changes to the
rbtree
For walking the list of mount namespaces sequentially via nsfs we
keep a separate rcu list as rb_prev() and rb_next() aren't usable
safely with rcu. Currently there is no primitive for retrieving the
previous list member. To do this we need a new deletion primitive
that doesn't poison the prev pointer and a corresponding retrieval
helper
Since creating mount namespaces is a relatively rare event compared
with querying mounts in a foreign mount namespace this is worth it.
Once libmount and systemd pick up this mechanism to list mounts in
foreign mount namespaces this will be used very frequently
- Add extended selftests for lockless mount namespace iteration
- Add a sample program to list all mounts on the system, i.e., in
all mount namespaces
- Improve mount namespace iteration performance
Make finding the last or first mount to start iterating the mount
namespace from an O(1) operation and add selftests for iterating the
mount table starting from the first and last mount
- Use an xarray for the old mount id
While the ida does use the xarray internally we can use it explicitly
which allows us to increment the unique mount id under the xa lock.
This allows us to remove the atomic as we're now allocating both ids
in one go
- Use a shared header for vfs sample programs
- Fix build warnings for new sample program to list all mounts
* tag 'vfs-6.14-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
samples/vfs: fix build warnings
samples/vfs: use shared header
samples/vfs/mountinfo: Use __u64 instead of uint64_t
fs: remove useless lockdep assertion
fs: use xarray for old mount id
selftests: add listmount() iteration tests
fs: cache first and last mount
samples: add test-list-all-mounts
selftests: remove unneeded include
selftests: add tests for mntns iteration
seltests: move nsfs into filesystems subfolder
fs: simplify rwlock to spinlock
fs: lockless mntns lookup for nsfs
rculist: add list_bidir_{del,prev}_rcu()
fs: lockless mntns rbtree lookup
fs: add mount namespace to rbtree late
fs: prepend statmount.mnt_opts string with security_sb_mnt_opts()
mount: remove inlude/nospec.h include
samples: add a mountinfo program to demonstrate statmount()/listmount()
Pull pid_max namespacing update from Christian Brauner:
"The pid_max sysctl is a global value. For a long time the default
value has been 65535 and during the pidfd dicussions Linus proposed to
bump pid_max by default. Based on this discussion systemd started
bumping pid_max to 2^22. So all new systems now run with a very high
pid_max limit with some distros having also backported that change.
The decision to bump pid_max is obviously correct. It just doesn't
make a lot of sense nowadays to enforce such a low pid number. There's
sufficient tooling to make selecting specific processes without typing
really large pid numbers available.
In any case, there are workloads that have expections about how large
pid numbers they accept. Either for historical reasons or
architectural reasons. One concreate example is the 32-bit version of
Android's bionic libc which requires pid numbers less than 65536.
There are workloads where it is run in a 32-bit container on a 64-bit
kernel. If the host has a pid_max value greater than 65535 the libc
will abort thread creation because of size assumptions of
pthread_mutex_t.
That's a fairly specific use-case however, in general specific
workloads that are moved into containers running on a host with a new
kernel and a new systemd can run into issues with large pid_max
values. Obviously making assumptions about the size of the allocated
pid is suboptimal but we have userspace that does it.
Of course, giving containers the ability to restrict the number of
processes in their respective pid namespace indepent of the global
limit through pid_max is something desirable in itself and comes in
handy in general.
Independent of motivating use-cases the existence of pid namespaces
makes this also a good semantical extension and there have been prior
proposals pushing in a similar direction. The trick here is to
minimize the risk of regressions which I think is doable. The fact
that pid namespaces are hierarchical will help us here.
What we mostly care about is that when the host sets a low pid_max
limit, say (crazy number) 100 that no descendant pid namespace can
allocate a higher pid number in its namespace. Since pid allocation is
hierarchial this can be ensured by checking each pid allocation
against the pid namespace's pid_max limit. This means if the
allocation in the descendant pid namespace succeeds, the ancestor pid
namespace can reject it. If the ancestor pid namespace has a higher
limit than the descendant pid namespace the descendant pid namespace
will reject the pid allocation. The ancestor pid namespace will
obviously not care about this.
All in all this means pid_max continues to enforce a system wide limit
on the number of processes but allows pid namespaces sufficient leeway
in handling workloads with assumptions about pid values and allows
containers to restrict the number of processes in a pid namespace
through the pid_max interface"
* tag 'kernel-6.14-rc1.pid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
tests/pid_namespace: add pid_max tests
pid: allow pid_max to be set per pid namespace
Pull pidfs updates from Christian Brauner:
- Rework inode number allocation
Recently we received a patchset that aims to enable file handle
encoding and decoding via name_to_handle_at(2) and
open_by_handle_at(2).
A crucical step in the patch series is how to go from inode number to
struct pid without leaking information into unprivileged contexts.
The issue is that in order to find a struct pid the pid number in the
initial pid namespace must be encoded into the file handle via
name_to_handle_at(2).
This can be used by containers using a separate pid namespace to
learn what the pid number of a given process in the initial pid
namespace is. While this is a weak information leak it could be used
in various exploits and in general is an ugly wart in the design.
To solve this problem a new way is needed to lookup a struct pid
based on the inode number allocated for that struct pid. The other
part is to remove the custom inode number allocation on 32bit systems
that is also an ugly wart that should go away.
Allocate unique identifiers for struct pid by simply incrementing a
64 bit counter and insert each struct pid into the rbtree so it can
be looked up to decode file handles avoiding to leak actual pids
across pid namespaces in file handles.
On both 64 bit and 32 bit the same 64 bit identifier is used to
lookup struct pid in the rbtree. On 64 bit the unique identifier for
struct pid simply becomes the inode number. Comparing two pidfds
continues to be as simple as comparing inode numbers.
On 32 bit the 64 bit number assigned to struct pid is split into two
32 bit numbers. The lower 32 bits are used as the inode number and
the upper 32 bits are used as the inode generation number. Whenever a
wraparound happens on 32 bit the 64 bit number will be incremented by
2 so inode numbering starts at 2 again.
When a wraparound happens on 32 bit multiple pidfds with the same
inode number are likely to exist. This isn't a problem since before
pidfs pidfds used the anonymous inode meaning all pidfds had the same
inode number. On 32 bit sserspace can thus reconstruct the 64 bit
identifier by retrieving both the inode number and the inode
generation number to compare, or use file handles. This gives the
same guarantees on both 32 bit and 64 bit.
- Implement file handle support
This is based on custom export operation methods which allows pidfs
to implement permission checking and opening of pidfs file handles
cleanly without hacking around in the core file handle code too much.
- Support bind-mounts
Allow bind-mounting pidfds. Similar to nsfs let's allow bind-mounts
for pidfds. This allows pidfds to be safely recovered and checked for
process recycling.
Instead of checking d_ops for both nsfs and pidfs we could in a
follow-up patch add a flag argument to struct dentry_operations that
functions similar to file_operations->fop_flags.
* tag 'vfs-6.14-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add pidfd bind-mount tests
pidfs: allow bind-mounts
pidfs: lookup pid through rbtree
selftests/pidfd: add pidfs file handle selftests
pidfs: check for valid ioctl commands
pidfs: implement file handle support
exportfs: add permission method
fhandle: pull CAP_DAC_READ_SEARCH check into may_decode_fh()
exportfs: add open method
fhandle: simplify error handling
pseudofs: add support for export_ops
pidfs: support FS_IOC_GETVERSION
pidfs: remove 32bit inode number handling
pidfs: rework inode number allocation
Add both asm-based and C-based tests which have 'may_goto 0' insns.
For the following code in C-based test,
int i, tmp[3];
for (i = 0; i < 3 && can_loop; i++)
tmp[i] = 0;
The clang compiler (clang 19 and 20) generates
may_goto 2
may_goto 1
may_goto 0
r1 = 0
r2 = 0
r3 = 0
The above asm codes are due to llvm pass SROAPass. This ensures the
successful verification since tmp[0-2] are initialized. Otherwise,
the code without SROAPass like
may_goto 5
r1 = 0
may_goto 3
r2 = 0
may_goto 1
r3 = 0
will have verification failure.
Although from the source code C-based test should have verification
failure, clang compiler optimization generates code with successful
verification. If gcc generates different asm codes than clang, the
following code can be used for gcc:
int i, tmp[3];
for (i = 0; i < 3; i++)
tmp[i] = 0;
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250118192034.2124952-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull misc vfs updates from Christian Brauner:
"Features:
- Support caching symlink lengths in inodes
The size is stored in a new union utilizing the same space as
i_devices, thus avoiding growing the struct or taking up any more
space
When utilized it dodges strlen() in vfs_readlink(), giving about
1.5% speed up when issuing readlink on /initrd.img on ext4
- Add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag
If a file system supports uncached buffered IO, it may set
FOP_DONTCACHE and enable support for RWF_DONTCACHE.
If RWF_DONTCACHE is attempted without the file system supporting
it, it'll get errored with -EOPNOTSUPP
- Enable VBOXGUEST and VBOXSF_FS on ARM64
Now that VirtualBox is able to run as a host on arm64 (e.g. the
Apple M3 processors) we can enable VBOXSF_FS (and in turn
VBOXGUEST) for this architecture.
Tested with various runs of bonnie++ and dbench on an Apple MacBook
Pro with the latest Virtualbox 7.1.4 r165100 installed
Cleanups:
- Delay sysctl_nr_open check in expand_files()
- Use kernel-doc includes in fiemap docbook
- Use page->private instead of page->index in watch_queue
- Use a consume fence in mnt_idmap() as it's heavily used in
link_path_walk()
- Replace magic number 7 with ARRAY_SIZE() in fc_log
- Sort out a stale comment about races between fd alloc and dup2()
- Fix return type of do_mount() from long to int
- Various cosmetic cleanups for the lockref code
Fixes:
- Annotate spinning as unlikely() in __read_seqcount_begin
The annotation already used to be there, but got lost in commit
52ac39e5db ("seqlock: seqcount_t: Implement all read APIs as
statement expressions")
- Fix proc_handler for sysctl_nr_open
- Flush delayed work in delayed fput()
- Fix grammar and spelling in propagate_umount()
- Fix ESP not readable during coredump
In /proc/PID/stat, there is the kstkesp field which is the stack
pointer of a thread. While the thread is active, this field reads
zero. But during a coredump, it should have a valid value
However, at the moment, kstkesp is zero even during coredump
- Don't wake up the writer if the pipe is still full
- Fix unbalanced user_access_end() in select code"
* tag 'vfs-6.14-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
gfs2: use lockref_init for qd_lockref
erofs: use lockref_init for pcl->lockref
dcache: use lockref_init for d_lockref
lockref: add a lockref_init helper
lockref: drop superfluous externs
lockref: use bool for false/true returns
lockref: improve the lockref_get_not_zero description
lockref: remove lockref_put_not_zero
fs: Fix return type of do_mount() from long to int
select: Fix unbalanced user_access_end()
vbox: Enable VBOXGUEST and VBOXSF_FS on ARM64
pipe_read: don't wake up the writer if the pipe is still full
selftests: coredump: Add stackdump test
fs/proc: do_task_stat: Fix ESP not readable during coredump
fs: add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag
fs: sort out a stale comment about races between fd alloc and dup2
fs: Fix grammar and spelling in propagate_umount()
fs: fc_log replace magic number 7 with ARRAY_SIZE()
fs: use a consume fence in mnt_idmap()
file: flush delayed work in delayed fput()
...
The main purpose of the test is to demonstrate the lock problem for the
free of bpf_timer under PREEMPT_RT. When freeing a bpf_timer which is
running on other CPU in bpf_timer_cancel_and_free(), hrtimer_cancel()
will try to acquire a spin-lock (namely softirq_expiry_lock), however
the freeing procedure has already held a raw-spin-lock.
The test first creates two threads: one to start timers and the other to
free timers. The start-timers thread will start the timer and then wake
up the free-timers thread to free these timers when the starts complete.
After freeing, the free-timer thread will wake up the start-timer thread
to complete the current iteration. A loop of 10 iterations is used.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250117101816.2101857-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
KVM/riscv changes for 6.14
- Svvptc, Zabha, and Ziccrse extension support for Guest/VM
- Virtualize SBI system suspend extension for Guest/VM
- Trap related exit statstics as SBI PMU firmware counters for Guest/VM
KVM x86 misc changes for 6.14:
- Overhaul KVM's CPUID feature infrastructure to track all vCPU capabilities
instead of just those where KVM needs to manage state and/or explicitly
enable the feature in hardware. Along the way, refactor the code to make
it easier to add features, and to make it more self-documenting how KVM
is handling each feature.
- Rework KVM's handling of VM-Exits during event vectoring; this plugs holes
where KVM unintentionally puts the vCPU into infinite loops in some scenarios
(e.g. if emulation is triggered by the exit), and brings parity between VMX
and SVM.
- Add pending request and interrupt injection information to the kvm_exit and
kvm_entry tracepoints respectively.
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU when
loading guest/host PKRU, due to a refactoring of the kernel helpers that
didn't account for KVM's pre-checking of the need to do WRPKRU.
The current self tests expect the zero size remnants that failed
variable creation leaves. Update the tests to verify these are now
absent.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now that the ability of arbitrary writes to set the inode size is
fixed, verify that a variable file accepts a truncation operation but
does not change the stat size because of it.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Charlie Jenkins <charlie@rivosinc.com> says:
xtheadvector is a custom extension that is based upon riscv vector
version 0.7.1 [1]. All of the vector routines have been modified to
support this alternative vector version based upon whether xtheadvector
was determined to be supported at boot.
vlenb is not supported on the existing xtheadvector hardware, so a
devicetree property thead,vlenb is added to provide the vlenb to Linux.
There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is
used to request which thead vendor extensions are supported on the
current platform. This allows future vendors to allocate hwprobe keys
for their vendor.
Support for xtheadvector is also added to the vector kselftests.
[1] 95358cb2cc/xtheadvector.adoc
* b4-shazam-merge:
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-0-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Overhaul the riscv vector tests to use kselftest_harness to help the
test cases correctly report the results and decouple the individual test
cases from each other. With this refactoring, only run the test cases if
vector is reported and properly report the test case as skipped
otherwise. The v_initval_nolibc test was previously not checking if
vector was supported and used a function (malloc) which invalidates
the state of the vector registers.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-12-236c22791ef9@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit b9d5f5711d ("selftests: net: increase the delay for relative
cmsg_time.sh test") widened the accepted value range 8x but we still
see flakes (at a rate of around 7%).
Return XFAIL for the most timing sensitive test on slow machines.
Before:
# ./cmsg_time.sh
Case UDPv4 - TXTIME rel returned '8074us - 7397us < 4000', expected 'OK'
FAIL - 1/36 cases failed
After:
# ./cmsg_time.sh
Case UDPv4 - TXTIME rel returned '1123us - 941us < 500', expected 'OK' (XFAIL)
Case UDPv6 - TXTIME rel returned '1227us - 776us < 500', expected 'OK' (XFAIL)
OK
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250116020105.931338-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
... so that they can be copied with struct assignment (which generates
better code) and accessed word-by-word.
The type is union shortname_storage; it's a union of arrays of
unsigned char and unsigned long.
struct name_snapshot.inline_name turned into union shortname_storage;
users (all in fs/dcache.c) adjusted.
struct dentry.d_iname has some users outside of fs/dcache.c; to
reduce the amount of noise in commit, it is replaced with
union shortname_storage d_shortname and d_iname is turned into a macro
that expands to d_shortname.string (similar to d_lock handling).
That compat macro is temporary - most of the remaining instances will
be taken out by debugfs series, and once that is merged and few others
are taken care of this will go away.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Check that a domain is not tied to the executable file that created it.
For instance, that could happen if a Landlock domain took a reference to
a struct path.
Move global path names to common.h and replace copy_binary() with a more
generic copy_file() helper.
Test coverage for security/landlock is 92.7% of 1133 lines according to
gcc/gcov-14.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-23-mic@digikod.net
[mic: Update date and add test coverage]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add layout1.refer_part_mount_tree_is_allowed to test the masked logical
issue regarding collect_domain_accesses() calls followed by the
is_access_to_paths_allowed() check in current_check_refer_path(). See
previous commit.
This test should work without the previous fix as well, but it enables
us to make sure future changes will not have impact regarding this
behavior.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-13-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
* kvm-arm64/coresight-6.14:
: .
: Trace filtering update from James Clark. From the cover letter:
:
: "The guest filtering rules from the Perf session are now honored for both
: nVHE and VHE modes. This is done by either writing to TRFCR_EL12 at the
: start of the Perf session and doing nothing else further, or caching the
: guest value and writing it at guest switch for nVHE. In pKVM, trace is
: now be disabled for both protected and unprotected guests."
: .
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
Signed-off-by: Marc Zyngier <maz@kernel.org>
Test that nullness elision works for common use cases. For example, we
want to check that both constant scalar spills and STACK_ZERO functions.
As well as when there's both const and non-const values of R2 leading up
to a lookup. And obviously some bound checks.
Particularly tricky are spills both smaller or larger than key size. For
smaller, we need to ensure verifier doesn't let through a potential read
into unchecked bytes. For larger, endianness comes into play, as the
native endian value tracked in the verifier may not be the bytes the
kernel would have read out of the key pointer. So check that we disallow
both.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/f1dacaa777d4516a5476162e0ea549f7c3354d73.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit allows progs to elide a null check on statically known map
lookup keys. In other words, if the verifier can statically prove that
the lookup will be in-bounds, allow the prog to drop the null check.
This is useful for two reasons:
1. Large numbers of nullness checks (especially when they cannot fail)
unnecessarily pushes prog towards BPF_COMPLEXITY_LIMIT_JMP_SEQ.
2. It forms a tighter contract between programmer and verifier.
For (1), bpftrace is starting to make heavier use of percpu scratch
maps. As a result, for user scripts with large number of unrolled loops,
we are starting to hit jump complexity verification errors. These
percpu lookups cannot fail anyways, as we only use static key values.
Eliding nullness probably results in less work for verifier as well.
For (2), percpu scratch maps are often used as a larger stack, as the
currrent stack is limited to 512 bytes. In these situations, it is
desirable for the programmer to express: "this lookup should never fail,
and if it does, it means I messed up the code". By omitting the null
check, the programmer can "ask" the verifier to double check the logic.
Tests also have to be updated in sync with these changes, as the
verifier is more efficient with this change. Notable, iters.c tests had
to be changed to use a map type that still requires null checks, as it's
exercising verifier tracking logic w.r.t iterators.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/68f3ea96ff3809a87e502a11a4bd30177fc5823e.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Previously, the verifier was treating all PTR_TO_STACK registers passed
to a helper call as potentially written to by the helper. However, all
calls to check_stack_range_initialized() already have precise access type
information available.
Rather than treat ACCESS_HELPER as a proxy for BPF_WRITE, pass
enum bpf_access_type to check_stack_range_initialized() to more
precisely track helper arguments.
One benefit from this precision is that registers tracked as valid
spills and passed as a read-only helper argument remain tracked after
the call. Rather than being marked STACK_MISC afterwards.
An additional benefit is the verifier logs are also more precise. For
this particular error, users will enjoy a slightly clearer message. See
included selftest updates for examples.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/ff885c0e5859e0cd12077c3148ff0754cad4f7ed.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The tool pp_alloc_fail.py tested error recovery by injecting errors
into the function page_pool_alloc_pages(). The page pool allocation
function page_pool_dev_alloc() does not end up calling
page_pool_alloc_pages(). page_pool_alloc_netmems() seems to be the
function that is called by all of the page pool alloc functions in
the API, so move error injection to that function instead.
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250115181312.3544-2-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When redirecting the split BTF to the vmlinux base BTF, we need to mark
the distilled base struct/union members of split BTF structs/unions in
id_map with BTF_IS_EMBEDDED. This indicates that these types must match
both name and size later. So if a needed composite type, which is the
member of composite type in the split BTF, has a different size in the
base BTF we wish to relocate with, btf__relocate() should error out.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250115100241.4171581-4-pulehui@huaweicloud.com
libbpf automatically adjusts autoload for struct_ops programs,
see libbpf.c:bpf_object_adjust_struct_ops_autoload.
For example, if there is a map:
SEC(".struct_ops.link")
struct sched_ext_ops ops = {
.enqueue = foo,
.tick = bar,
};
Both 'foo' and 'bar' would be loaded if 'ops' autocreate is true,
both 'foo' and 'bar' would be skipped if 'ops' autocreate is false.
This means that when veristat processes object file with 'ops',
it would load 4 programs in total: two programs per each
'process_prog' call.
The adjustment occurs at object load time, and libbpf remembers
association between 'ops' and 'foo'/'bar' at object open time.
The only way to persuade libbpf to load one of two is to adjust map
initial value, such that only one program is referenced.
This patch does exactly that, significantly reducing time to process
object files with big number of struct_ops programs.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250115223835.919989-1-eddyz87@gmail.com
Include <limits.h> in 'veristat.c' to provide a UINT_MAX definition and
avoid multiple compile errors against mips64el/musl-libc:
veristat.c: In function 'max_verifier_log_size':
veristat.c:1135:36: error: 'UINT_MAX' undeclared (first use in this function)
1135 | const int SMALL_LOG_SIZE = UINT_MAX >> 8;
| ^~~~~~~~
veristat.c:24:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'?
23 | #include <math.h>
+++ |+#include <limits.h>
24 |
Fixes: 1f7c336307 ("selftests/bpf: Increase verifier log limit in veristat")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250116075036.3459898-1-tony.ambardar@gmail.com
Pull networking fixes from Paolo Abeni:
"Notably this includes fixes for a few regressions spotted very
recently. No known outstanding ones.
Current release - regressions:
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in
ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth:
- bnxt: always recalculate features after XDP clearing, fix
null-deref
- mlx5: fix sub-function add port error handling
- fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth:
- ice: fix E825 initialization
- mlx5e: fix inversion dependency warning while enabling IPsec
tunnel
- gtp: destroy device along with udp socket's netns dismantle.
- xilinx: axienet: Fix IRQ coalescing packet count overflow"
* tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netdev: avoid CFI problems with sock priv helpers
net/mlx5e: Always start IPsec sequence number from 1
net/mlx5e: Rely on reqid in IPsec tunnel mode
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
net/mlx5: Clear port select structure when fail to create
net/mlx5: SF, Fix add port error handling
net/mlx5: Fix a lockdep warning as part of the write combining test
net/mlx5: Fix RDMA TX steering prio
net: make page_pool_ref_netmem work with net iovs
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
selftests: net: Adapt ethtool mq tests to fix in qdisc graft
net: fec: handle page_pool_dev_alloc_pages error
net: netpoll: ensure skb_pool list is always initialized
net: xilinx: axienet: Fix IRQ coalescing packet count overflow
nfp: bpf: prevent integer overflow in nfp_bpf_event_output()
selftests: mptcp: avoid spurious errors on disconnect
mptcp: fix spurious wake-up on under memory pressure
mptcp: be sure to send ack when mptcp-level window re-opens
...
HDS/HDS-thresh features were updated/implemented. so add some tests for
these features.
HDS tests are the same with `ethtool -G eth0 tcp-data-split <on | off |
auto >` but `auto` depends on driver specification.
So, it doesn't include `auto` case.
HDS-thresh tests are same with `ethtool -G eth0 hds-thresh <0 - MAX>`
It includes both 0 and MAX cases. It also includes exceed case, MAX + 1.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-11-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Running "make kselftest TARGETS=net/forwarding" results in
multiple ccurrences of the same error:
- ./lib.sh: line 787: teamd: command not found
This patch adds the variable $REQUIRE_TEAMD in every test that uses the
command teamd and checks the $REQUIRE_TEAMD variable in the file "lib.sh"
to skip the test if the command is not installed.
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20250114003323.97207-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'du' will print the name of the file, which was already displayed
before, e.g.
Created /tmp/tmp.UOyy0ghfmQ (size 4703740/tmp/tmp.UOyy0ghfmQ) containing data sent by client
Created /tmp/tmp.xq3zvFinGo (size 1391724/tmp/tmp.xq3zvFinGo) containing data sent by server
'stat' can be used instead, to display this instead:
Created /tmp/tmp.UOyy0ghfmQ (size 4703740 B) containing data sent by client
Created /tmp/tmp.xq3zvFinGo (size 1391724 B) containing data sent by server
So easier to spot the file sizes.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-6-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to unify what is printed in case of error, similar to what is
done in mptcp_connect.sh and mptcp_join.sh, it is interesting to do the
following modifications in simult_flows.sh:
- Print the rc errors at the end of the line.
- Print the MIB counters.
- Use the same ss options: add -M (MPTCP sockets) and -e (detailed
socket information).
While at it, also print of the 'max' time only in case of success,
because 'mptcp_connect.c' will already print this info in case of error,
e.g.:
transfer slower than expected! runtime 11948 ms, expected 11921 ms
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-1-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When porting librseq commit:
commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
from librseq to the kernel selftests, the following line was missed
at the end of rseq_init():
rseq_size = get_rseq_kernel_feature_size();
which effectively leaves rseq_size initialized to -1U when glibc does not
have rseq support. glibc supports rseq from version 2.35 onwards.
In a following librseq commit
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")
to mimic the libc behavior, a new approach is taken: don't set the
feature size in 'rseq_size' until at least one thread has successfully
registered. This allows using 'rseq_size' in fast-paths to test for both
registration status and available features. The caveat is that on libc
either all threads are registered or none are, while with bare librseq
it is the responsability of the user to register all threads using rseq.
This combines the changes from the following librseq git commits:
commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")
Fixes: a0cc649353 ("selftests/rseq: Fix mm_cid test failure")
Reported-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Carlos O'Donell <carlos@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
LoongArch KVM changes for v6.14
1. Clear LLBCTL if secondary mmu mapping changed.
2. Add hypercall service support for usermode VMM.
This is a really small changeset, because the Chinese New Year
(Spring Festival) is coming. Happy New Year!
Because of patch[1] the graft behaviour changed
So the command:
tcq replace parent 100:1 handle 204:
Is no longer valid and will not delete 100:4 added by command:
tcq replace parent 100:4 handle 204: pfifo_fast
So to maintain the original behaviour, this patch manually deletes 100:4
and grafts 100:1
Note: This change will also work fine without [1]
[1] https://lore.kernel.org/netdev/20250111151455.75480-1-jhs@mojatatu.com/T/#u
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
