A subset of AMD Processors supporting Preferred Core Rankings also
feature the ability to dynamically switch these rankings at runtime to
bias load balancing towards or away from the LLC domain with larger
cache.
To support dynamically updating "sg->asym_prefer_cpu" without needing to
rebuild the sched domain, introduce sched_update_asym_prefer_cpu() which
recomutes the "asym_prefer_cpu" when the core-ranking of a CPU changes.
sched_update_asym_prefer_cpu() swaps the "sg->asym_prefer_cpu" with the
CPU whose ranking has changed if the new ranking is greater than that of
the "asym_prefer_cpu". If CPU whose ranking has changed is the current
"asym_prefer_cpu", it scans the CPUs of the sched groups to find the new
"asym_prefer_cpu" and sets it accordingly.
get_group() for non-overlapping sched domains returns the sched group
for the first CPU in the sched_group_span() which ensures all CPUs in
the group see the updated value of "asym_prefer_cpu".
Overlapping groups are allocated differently and will require moving the
"asym_prefer_cpu" to "sg->sgc" but since the current implementations do
not set "SD_ASYM_PACKING" at NUMA domains, skip additional
indirection and place a SCHED_WARN_ON() to alert any future users.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409053446.23367-3-kprateek.nayak@amd.com
scx_has_op is used to encode which ops are implemented by the BPF scheduler
into an array of static_keys. While this saves a bit of branching overhead,
that is unlikely to be noticeable compared to the overall cost. As the
global static_keys can't work with the planned hierarchical multiple
scheduler support, replace the static_key array with a bitmap.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_ops_allow_queued_wakeup is used to encode SCX_OPS_ALLOW_QUEUED_WAKEUP
into a static_key. The test is gated behind scx_enabled(), and, even when
sched_ext is enabled, is unlikely for the static_key usage to make any
meaningful difference. It is made to use a static_key mostly because there
was no reason not to. However, global static_keys can't work with the
planned hierarchical multiple scheduler support. Remove the static_key and
instead test SCX_OPS_ALLOW_QUEUED_WAKEUP directly.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_ops_cpu_preempt is used to encode whether ops.cpu_acquire/release() are
implemented into a static_key. These tests aren't hot enough for static_key
usage to make any meaningful difference and are made to use a static_key
mostly because there was no reason not to. However, global static_keys can't
work with the planned hierarchical multiple scheduler support. Remove the
static_key and instead use an internal ops flag SCX_OPS_HAS_CPU_PREEMPT to
record and test whether ops.cpu_acquire/release() are implemented.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_ops_enq_last/exiting/migration_disabled are used to encode the
corresponding SCX_OPS_ flags into static_keys. These flags aren't hot enough
for static_key usage to make any meaningful difference and are made
static_keys mostly because there was no reason not to. However, global
static_keys can't work with the planned hierarchical multiple scheduler
support. Remove the static_keys and test the ops flags directly.
In repeated hackbench runs before and after static_keys removal on an AMD
Ryzen 3900X, I couldn't tell any measurable performance difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Pull for-6.15-fixes to receive:
e776b26e37 ("sched_ext: Remove cpu.weight / cpu.idle unimplemented warnings")
which conflicts with:
1a7ff7216c ("sched_ext: Drop "ops" from scx_ops_enable_state and friends")
The former removes code updated by the latter. Resolved by removing the
updated section.
Signed-off-by: Tejun Heo <tj@kernel.org>
The exising code uses housekeeping_any_cpu() to select a cpu for
a given housekeeping task. However, this often ends up calling
cpumask_any_and() which is defined as cpumask_first_and() which has
the effect of alyways using the first cpu among those available.
The same applies when multiple NUMA nodes are involved. In that
case the first cpu in the local node is chosen which does provide
a bit of spreading but with multiple HK cpus per node the same
issues arise.
We have numerous cases where a single HK cpu just cannot keep up
and the remote_tick warning fires. It also can lead to the other
things (orchastration sw, HA keepalives etc) on the HK cpus getting
starved which leads to other issues. In these cases we recommend
increasing the number of HK cpus. But... that only helps the
userspace tasks somewhat. It does not help the actual housekeeping
part.
Spread the HK work out by having housekeeping_any_cpu() and
sched_numa_find_closest() use cpumask_any_and_distribute()
instead of cpumask_any_and().
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Vishal Chourasia <vishalc@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20250218184618.1331715-1-pauld@redhat.com
Overview
========
When a CPU chooses to call push_rt_task and picks a task to push to
another CPU's runqueue then it will call find_lock_lowest_rq method
which would take a double lock on both CPUs' runqueues. If one of the
locks aren't readily available, it may lead to dropping the current
runqueue lock and reacquiring both the locks at once. During this window
it is possible that the task is already migrated and is running on some
other CPU. These cases are already handled. However, if the task is
migrated and has already been executed and another CPU is now trying to
wake it up (ttwu) such that it is queued again on the runqeue
(on_rq is 1) and also if the task was run by the same CPU, then the
current checks will pass even though the task was migrated out and is no
longer in the pushable tasks list.
Crashes
=======
This bug resulted in quite a few flavors of crashes triggering kernel
panics with various crash signatures such as assert failures, page
faults, null pointer dereferences, and queue corruption errors all
coming from scheduler itself.
Some of the crashes:
-> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO)
Call Trace:
? __die_body+0x1a/0x60
? die+0x2a/0x50
? do_trap+0x85/0x100
? pick_next_task_rt+0x6e/0x1d0
? do_error_trap+0x64/0xa0
? pick_next_task_rt+0x6e/0x1d0
? exc_invalid_op+0x4c/0x60
? pick_next_task_rt+0x6e/0x1d0
? asm_exc_invalid_op+0x12/0x20
? pick_next_task_rt+0x6e/0x1d0
__schedule+0x5cb/0x790
? update_ts_time_stats+0x55/0x70
schedule_idle+0x1e/0x40
do_idle+0x15e/0x200
cpu_startup_entry+0x19/0x20
start_secondary+0x117/0x160
secondary_startup_64_no_verify+0xb0/0xbb
-> BUG: kernel NULL pointer dereference, address: 00000000000000c0
Call Trace:
? __die_body+0x1a/0x60
? no_context+0x183/0x350
? __warn+0x8a/0xe0
? exc_page_fault+0x3d6/0x520
? asm_exc_page_fault+0x1e/0x30
? pick_next_task_rt+0xb5/0x1d0
? pick_next_task_rt+0x8c/0x1d0
__schedule+0x583/0x7e0
? update_ts_time_stats+0x55/0x70
schedule_idle+0x1e/0x40
do_idle+0x15e/0x200
cpu_startup_entry+0x19/0x20
start_secondary+0x117/0x160
secondary_startup_64_no_verify+0xb0/0xbb
-> BUG: unable to handle page fault for address: ffff9464daea5900
kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p))
-> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running)
Call Trace:
? __die_body+0x1a/0x60
? die+0x2a/0x50
? do_trap+0x85/0x100
? dequeue_top_rt_rq+0xa2/0xb0
? do_error_trap+0x64/0xa0
? dequeue_top_rt_rq+0xa2/0xb0
? exc_invalid_op+0x4c/0x60
? dequeue_top_rt_rq+0xa2/0xb0
? asm_exc_invalid_op+0x12/0x20
? dequeue_top_rt_rq+0xa2/0xb0
dequeue_rt_entity+0x1f/0x70
dequeue_task_rt+0x2d/0x70
__schedule+0x1a8/0x7e0
? blk_finish_plug+0x25/0x40
schedule+0x3c/0xb0
futex_wait_queue_me+0xb6/0x120
futex_wait+0xd9/0x240
do_futex+0x344/0xa90
? get_mm_exe_file+0x30/0x60
? audit_exe_compare+0x58/0x70
? audit_filter_rules.constprop.26+0x65e/0x1220
__x64_sys_futex+0x148/0x1f0
do_syscall_64+0x30/0x80
entry_SYSCALL_64_after_hwframe+0x62/0xc7
-> BUG: unable to handle page fault for address: ffff8cf3608bc2c0
Call Trace:
? __die_body+0x1a/0x60
? no_context+0x183/0x350
? spurious_kernel_fault+0x171/0x1c0
? exc_page_fault+0x3b6/0x520
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? asm_exc_page_fault+0x1e/0x30
? _cond_resched+0x15/0x30
? futex_wait_queue_me+0xc8/0x120
? futex_wait+0xd9/0x240
? try_to_wake_up+0x1b8/0x490
? futex_wake+0x78/0x160
? do_futex+0xcd/0xa90
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? plist_del+0x6a/0xd0
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? dequeue_pushable_task+0x20/0x70
? __schedule+0x382/0x7e0
? asm_sysvec_reschedule_ipi+0xa/0x20
? schedule+0x3c/0xb0
? exit_to_user_mode_prepare+0x9e/0x150
? irqentry_exit_to_user_mode+0x5/0x30
? asm_sysvec_reschedule_ipi+0x12/0x20
Above are some of the common examples of the crashes that were observed
due to this issue.
Details
=======
Let's look at the following scenario to understand this race.
1) CPU A enters push_rt_task
a) CPU A has chosen next_task = task p.
b) CPU A calls find_lock_lowest_rq(Task p, CPU Z’s rq).
c) CPU A identifies CPU X as a destination CPU (X < Z).
d) CPU A enters double_lock_balance(CPU Z’s rq, CPU X’s rq).
e) Since X is lower than Z, CPU A unlocks CPU Z’s rq. Someone else has
locked CPU X’s rq, and thus, CPU A must wait.
2) At CPU Z
a) Previous task has completed execution and thus, CPU Z enters
schedule, locks its own rq after CPU A releases it.
b) CPU Z dequeues previous task and begins executing task p.
c) CPU Z unlocks its rq.
d) Task p yields the CPU (ex. by doing IO or waiting to acquire a
lock) which triggers the schedule function on CPU Z.
e) CPU Z enters schedule again, locks its own rq, and dequeues task p.
f) As part of dequeue, it sets p.on_rq = 0 and unlocks its rq.
3) At CPU B
a) CPU B enters try_to_wake_up with input task p.
b) Since CPU Z dequeued task p, p.on_rq = 0, and CPU B updates
B.state = WAKING.
c) CPU B via select_task_rq determines CPU Y as the target CPU.
4) The race
a) CPU A acquires CPU X’s lock and relocks CPU Z.
b) CPU A reads task p.cpu = Z and incorrectly concludes task p is
still on CPU Z.
c) CPU A failed to notice task p had been dequeued from CPU Z while
CPU A was waiting for locks in double_lock_balance. If CPU A knew
that task p had been dequeued, it would return NULL forcing
push_rt_task to give up the task p's migration.
d) CPU B updates task p.cpu = Y and calls ttwu_queue.
e) CPU B locks Ys rq. CPU B enqueues task p onto Y and sets task
p.on_rq = 1.
f) CPU B unlocks CPU Y, triggering memory synchronization.
g) CPU A reads task p.on_rq = 1, cementing its assumption that task p
has not migrated.
h) CPU A decides to migrate p to CPU X.
This leads to A dequeuing p from Y's queue and various crashes down the
line.
Solution
========
The solution here is fairly simple. After obtaining the lock (at 4a),
the check is enhanced to make sure that the task is still at the head of
the pushable tasks list. If not, then it is anyway not suitable for
being pushed out.
Testing
=======
The fix is tested on a cluster of 3 nodes, where the panics due to this
are hit every couple of days. A fix similar to this was deployed on such
cluster and was stable for more than 30 days.
Co-developed-by: Jon Kohler <jon@nutanix.com>
Signed-off-by: Jon Kohler <jon@nutanix.com>
Co-developed-by: Gauri Patwardhan <gauri.patwardhan@nutanix.com>
Signed-off-by: Gauri Patwardhan <gauri.patwardhan@nutanix.com>
Co-developed-by: Rahul Chunduru <rahul.chunduru@nutanix.com>
Signed-off-by: Rahul Chunduru <rahul.chunduru@nutanix.com>
Signed-off-by: Harshit Agarwal <harshit@nutanix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Tested-by: Will Ton <william.ton@nutanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250225180553.167995-1-harshit@nutanix.com
With CONFIG_RT_GROUP_SCHED but runtime disabling of RT_GROUPs we expect
the existence of the root task_group only and all rt_sched_entity'ies
should be queued on root's rt_rq.
If we get a non-root RT_GROUP something went wrong.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-9-mkoutny@suse.com
Thanks to kernel cmdline being available early, before any
cgroup hierarchy exists, we can achieve the RT_GROUP_SCHED boottime
disabling goal by simply skipping any creation (and destruction) of
RT_GROUP data and its exposure via RT attributes.
We can do this thanks to previously placed runtime guards that would
redirect all operations to root_task_group's data when RT_GROUP_SCHED
disabled.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-8-mkoutny@suse.com
When RT_GROUPs are compiled but not exposed, their bandwidth cannot
be configured (and it is not initialized for non-root task_groups neither).
Therefore bypass any checks of task vs task_group bandwidth.
This will achieve behavior very similar to setups that have
!CONFIG_RT_GROUP_SCHED and attach cpu controller to cgroup v2 hierarchy.
(On a related note, this may allow having RT tasks with
CONFIG_RT_GROUP_SCHED and cgroup v2 hierarchy.)
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-7-mkoutny@suse.com
First, we want to prevent placement of RT tasks on non-root rt_rqs which
we achieve in the task migration code that'd fall back to
root_task_group's rt_rq.
Second, we want to work with only root_task_group's rt_rq when iterating
all "real" rt_rqs when RT_GROUP is disabled. To achieve this we keep
root_task_group as the first one on the task_groups and break out
quickly.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-6-mkoutny@suse.com
rt_rq->tg may be NULL which denotes the root task_group.
Store the pointer to root_task_group directly so that callers may use
rt_rq->tg homogenously.
root_task_group exists always with CONFIG_CGROUPS_SCHED,
CONFIG_RT_GROUP_SCHED depends on that.
This changes root level rt_rq's default limit from infinity to the
value of (originally) global RT throttling.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-4-mkoutny@suse.com
Convert the blocks guarded by macros to regular code so that the RT
group code gets more compile validation. Reasoning is in
Documentation/process/coding-style.rst 21) Conditional Compilation.
With that, no functional change is expected.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310170442.504716-2-mkoutny@suse.com
commit 10a35e6812 ("sched/pelt: Skip updating util_est when
utilization is higher than CPU's capacity")
prevents util_est from being updated if util_avg is higher than the
underlying CPU capacity to avoid overestimating the task when the CPU
is capped (due to thermal issue for instance). In this scenario, the
task will miss its deadlines and start overlapping its wake-up events
for instance. The task will appear as always running when the CPU is
just not powerful enough to allow having a good estimation of the
task.
commit b8c9636140 ("sched/fair/util_est: Implement faster ramp-up
EWMA on utilization increases")
sets ewma to util_avg when ewma > util_avg, allowing ewma to quickly
grow instead of slowly converge to the new util_avg value when a task
profile changes from small to big.
However, the 2 conditions:
- Check util_avg against max CPU capacity
- Check whether util_est > util_avg
are placed in an order such as it is possible to set util_est to a
value higher than the CPU capacity if util_est > util_avg, but
util_est is prevented to decay as long as:
CPU capacity < util_avg < util_est.
Just remove the check as either:
1.
There is idle time on the CPU. In that case the util_avg value of the
task is actually correct. It is possible that the task missed a
deadline and appears bigger, but this is also the case when the
util_avg of the task is lower than the maximum CPU capacity.
2.
There is no idle time. In that case, the util_avg value might aswell
be an under estimation of the size of the task.
It is possible that undesired frequency spikes will appear when the
task is later enqueued with an inflated util_est value, but the
frequency spike might aswell be deserved. The absence of idle time
prevents from drawing any conclusion.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.rog>
Link: https://lore.kernel.org/r/20250325150542.1077344-1-pierre.gondois@arm.com
Use a different approach to topology_span_sane(), that checks for the
same constraint of no partial overlaps for any two CPU sets for
non-NUMA topology levels, but does so in a way that is O(N) rather
than O(N^2).
Instead of comparing with all other masks to detect collisions, keep
one mask that includes all CPUs seen so far and detect collisions with
a single cpumask_intersects test.
If the current mask has no collisions with previously seen masks, it
should be a new mask, which can be uniquely identified by the lowest
bit set in this mask. Keep a pointer to this mask for future
reference (in an array indexed by the lowest bit set), and add the
CPUs in this mask to the list of those seen.
If the current mask does collide with previously seen masks, it should
be exactly equal to a mask seen before, looked up in the same array
indexed by the lowest bit set in the mask, a single comparison.
Move the topology_span_sane() check out of the existing topology level
loop, let it use its own loop so that the array allocation can be done
only once, shared across levels.
On a system with 1920 processors (16 sockets, 60 cores, 2 threads),
the average time to take one processor offline is reduced from 2.18
seconds to 1.01 seconds. (Off-lining 959 of 1920 processors took
34m49.765s without this change, 16m10.038s with this change in place.)
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Link: https://lore.kernel.org/r/20250304160844.75373-2-steve.wahl@hpe.com
Gabriele noted that in case of signal_pending_state(), the tracepoint
sees a stale task-state.
Fixes: fa2c3254d7 ("sched/tracing: Don't re-read p->state when emitting sched_switch event")
Reported-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Valentin Schneider <vschneid@redhat.com>
SCX_OPS_HAS_CGROUP_WEIGHT was only used to suppress the missing cgroup
weight support warnings. Now that the warnings are removed, the flag doesn't
do anything. Mark it for deprecation and remove its usage from scx_flatcg.
v2: Actually include the scx_flatcg update.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-and-reviewed-by: Andrea Righi <arighi@nvidia.com>
sched_ext generates warnings when cpu.weight / cpu.idle are set to
non-default values if the BPF scheduler doesn't implement weight support.
These warnings don't provide much value while adding constant annoyance. A
BPF scheduler may not implement any particular behavior and there's nothing
particularly special about missing cgroup weight support. Drop the warnings.
Signed-off-by: Tejun Heo <tj@kernel.org>
Replace kzalloc with kvzalloc for the exit_dump buffer allocation, which
can require large contiguous memory depending on the implementation.
This change prevents allocation failures by allowing the system to fall
back to vmalloc when contiguous memory allocation fails.
Since this buffer is only used for debugging purposes, physical memory
contiguity is not required, making vmalloc a suitable alternative.
Cc: stable@vger.kernel.org
Fixes: 07814a9439 ("sched_ext: Print debug dump after an error exit")
Suggested-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Provide a new kfunc, scx_bpf_select_cpu_and(), that can be used to apply
the built-in idle CPU selection policy to a subset of allowed CPU.
This new helper is basically an extension of scx_bpf_select_cpu_dfl().
However, when an idle CPU can't be found, it returns a negative value
instead of @prev_cpu, aligning its behavior more closely with
scx_bpf_pick_idle_cpu().
It also accepts %SCX_PICK_IDLE_* flags, which can be used to enforce
strict selection to @prev_cpu's node (%SCX_PICK_IDLE_IN_NODE), or to
request only a full-idle SMT core (%SCX_PICK_IDLE_CORE), while applying
the built-in selection logic.
With this helper, BPF schedulers can apply the built-in idle CPU
selection policy restricted to any arbitrary subset of CPUs.
Example usage
=============
Possible usage in ops.select_cpu():
s32 BPF_STRUCT_OPS(foo_select_cpu, struct task_struct *p,
s32 prev_cpu, u64 wake_flags)
{
const struct cpumask *cpus = task_allowed_cpus(p) ?: p->cpus_ptr;
s32 cpu;
cpu = scx_bpf_select_cpu_and(p, prev_cpu, wake_flags, cpus, 0);
if (cpu >= 0) {
scx_bpf_dsq_insert(p, SCX_DSQ_LOCAL, SCX_SLICE_DFL, 0);
return cpu;
}
return prev_cpu;
}
Results
=======
Load distribution on a 4 sockets, 4 cores per socket system, simulated
using virtme-ng, running a modified version of scx_bpfland that uses
scx_bpf_select_cpu_and() with 0xff00 as the allowed subset of CPUs:
$ vng --cpu 16,sockets=4,cores=4,threads=1
...
$ stress-ng -c 16
...
$ htop
...
0[ 0.0%] 8[||||||||||||||||||||||||100.0%]
1[ 0.0%] 9[||||||||||||||||||||||||100.0%]
2[ 0.0%] 10[||||||||||||||||||||||||100.0%]
3[ 0.0%] 11[||||||||||||||||||||||||100.0%]
4[ 0.0%] 12[||||||||||||||||||||||||100.0%]
5[ 0.0%] 13[||||||||||||||||||||||||100.0%]
6[ 0.0%] 14[||||||||||||||||||||||||100.0%]
7[ 0.0%] 15[||||||||||||||||||||||||100.0%]
With scx_bpf_select_cpu_dfl() tasks would be distributed evenly across
all the available CPUs.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Many scx schedulers implement their own hard or soft-affinity rules
to support topology characteristics, such as heterogeneous architectures
(e.g., big.LITTLE, P-cores/E-cores), or to categorize tasks based on
specific properties (e.g., running certain tasks only in a subset of
CPUs).
Currently, there is no mechanism that allows to use the built-in idle
CPU selection policy to an arbitrary subset of CPUs. As a result,
schedulers often implement their own idle CPU selection policies, which
are typically similar to one another, leading to a lot of code
duplication.
To address this, modify scx_select_cpu_dfl() to accept an arbitrary
cpumask, that can be used by the BPF schedulers to apply the existent
built-in idle CPU selection policy to a subset of allowed CPUs.
With this concept the idle CPU selection policy becomes the following:
- always prioritize CPUs from fully idle SMT cores (if SMT is enabled),
- select the same CPU if it's idle and in the allowed CPUs,
- select an idle CPU within the same LLC, if the LLC cpumask is a
subset of the allowed CPUs,
- select an idle CPU within the same node, if the node cpumask is a
subset of the allowed CPUs,
- select an idle CPU within the allowed CPUs.
This functionality will be exposed through a dedicated kfunc in a
separate patch.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Modify scx_select_cpu_dfl() to take the allowed cpumask as an explicit
argument, instead of implicitly using @p->cpus_ptr.
This prepares for future changes where arbitrary cpumasks may be passed
to the built-in idle CPU selection policy.
This is a pure refactoring with no functional changes.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The built-in idle selection policy, scx_select_cpu_dfl(), always
prioritizes picking idle CPUs within the same LLC or NUMA node, but
these optimizations are currently applied only when a task has no CPU
affinity constraints.
This is done primarily for efficiency, as it avoids the overhead of
updating a cpumask every time we need to select an idle CPU (which can
be costly in large SMP systems).
However, this approach limits the effectiveness of the built-in idle
policy and results in inconsistent behavior, as affinity-restricted
tasks don't benefit from topology-aware optimizations.
To address this, modify the policy to apply LLC and NUMA-aware
optimizations even when a task is constrained to a subset of CPUs.
We can still avoid updating the cpumasks by checking if the subset of
LLC and node CPUs are contained in the subset of allowed CPUs usable by
the task (which is true in most of the cases - for tasks that don't have
affinity constratints).
Moreover, use temporary local per-CPU cpumasks to determine the LLC and
node subsets, minimizing potential overhead even on large SMP systems.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull scheduler fixes from Ingo Molnar:
- Fix a nonsensical Kconfig combination
- Remove an unnecessary rseq-notification
* tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Eliminate useless task_work on execve
sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from SCX_OPS_TASK_ITER_BATCH.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-and-acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_{init|exit|enable|disable}[_task]() and friends.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_exit(), scx_ops_error() and friends.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_bypass(), scx_ops_breather() and friends. Update
scx_show_state.py accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_helper, scx_ops_enable_mutex and __scx_ops_enabled.
Update scx_show_state.py accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_enable_state and friends. Update scx_show_state.py
accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Pull sched_ext fixes from Tejun Heo:
- Calling scx_bpf_create_dsq() with the same ID would succeed creating
duplicate DSQs. Fix it to return -EEXIST.
- scx_select_cpu_dfl() fixes and cleanups.
- Synchronize tool/sched_ext with external scheduler repo. While this
isn't a fix. There's no risk to the kernel and it's better if they
stay synced closer.
* tag 'sched_ext-for-6.15-rc0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: Sync with scx repo
sched_ext: initialize built-in idle state before ops.init()
sched_ext: create_dsq: Return -EEXIST on duplicate request
sched_ext: Remove a meaningless conditional goto in scx_select_cpu_dfl()
sched_ext: idle: Fix return code of scx_select_cpu_dfl()
Eliminate a useless task_work on execve by moving the call to
rseq_set_notify_resume() from sched_mm_cid_after_execve() to the error
path of bprm_execve().
The call to rseq_set_notify_resume() from sched_mm_cid_after_execve() is
pointless in the success case, because rseq_execve() will clear the rseq
pointer before returning to userspace.
sched_mm_cid_after_execve() is called from both the success and error
paths of bprm_execve(). The call to rseq_set_notify_resume() is needed
on error because the mm_cid may have changed.
Also move the rseq_execve() to right after sched_mm_cid_after_execve()
in bprm_execve().
[ mingo: Merged to a recent upstream kernel, extended the changelog. ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250327132945.1558783-1-mathieu.desnoyers@efficios.com
Pull latency tracing updates from Steven Rostedt:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as
well as allows BPF programs to be attached to these locations to
extract even more data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing
the build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the
cumulative model is equivalent to running single components using the
same reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing
but an empty container for other monitors. Controlling the sched
monitor (enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
- sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
- tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
- snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
- scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
- snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
- sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rv: Allow rv list to filter for container
Documentation/rv: Add docs for the sched monitors
verification/dot2k: Add support for nested monitors
tools/rv: Add support for nested monitors
rv: Add scpd, snep and sncid per-cpu monitors
rv: Add snroc per-task monitor
rv: Add sco and tss per-cpu monitors
rv: Add option for nested monitors and include sched
sched: Add sched tracepoints for RV task model
rv: Add license identifiers to monitor files
tracing: Fix DECLARE_TRACE_CONDITION
trace/osnoise: Add trace events for samples
A BPF scheduler may want to use the built-in idle cpumasks in ops.init()
before the scheduler is fully initialized, either directly or through a
BPF timer for example.
However, this would result in an error, since the idle state has not
been properly initialized yet.
This can be easily verified by modifying scx_simple to call
scx_bpf_get_idle_cpumask() in ops.init():
$ sudo scx_simple
DEBUG DUMP
===========================================================================
scx_simple[121] triggered exit kind 1024:
runtime error (built-in idle tracking is disabled)
...
Fix this by properly initializing the idle state before ops.init() is
called. With this change applied:
$ sudo scx_simple
local=2 global=0
local=19 global=11
local=23 global=11
...
Fixes: d73249f887 ("sched_ext: idle: Make idle static keys private")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
create_dsq and therefore the scx_bpf_create_dsq kfunc currently silently
ignore duplicate entries. As a sched_ext scheduler is creating each DSQ
for a different purpose this is surprising behaviour.
Replace rhashtable_insert_fast which ignores duplicates with
rhashtable_lookup_insert_fast that reports duplicates (though doesn't
return their value). The rest of the code is structured correctly and
this now returns -EEXIST.
Tested by adding an extra scx_bpf_create_dsq to scx_simple. Previously
this was ignored, now init fails with a -17 code. Also ran scx_lavd
which continued to work well.
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Acked-by: Andrea Righi <arighi@nvidia.com>
Fixes: f0e1a0643a ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_select_cpu_dfl() has a meaningless conditional goto at the end. Remove
it. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrea Righi <arighi@nvidia.com>
Return -EBUSY when using %SCX_PICK_IDLE_CORE with scx_select_cpu_dfl()
if a fully idle SMT core cannot be found, instead of falling back to
@prev_cpu, which is not a fully idle SMT core in this case.
Fixes: c414c2171c ("sched_ext: idle: Honor idle flags in the built-in idle selection policy")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun
Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen
Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli, Sebastian
Andrzej Siewior)"
* tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
cpuidle, sched: Use smp_mb__after_atomic() in current_clr_polling()
sched/debug: Remove CONFIG_SCHED_DEBUG
sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config files
sched/debug, Documentation: Remove (most) CONFIG_SCHED_DEBUG references from documentation
sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditional
sched/debug: Make 'const_debug' tunables unconditional __read_mostly
sched/debug: Change SCHED_WARN_ON() to WARN_ON_ONCE()
rseq/selftests: Fix namespace collision with rseq UAPI header
include/{topology,cpuset}: Move dl_rebuild_rd_accounting to cpuset.h
sched/topology: Stop exposing partition_sched_domains_locked
cgroup/cpuset: Remove partition_and_rebuild_sched_domains
sched/topology: Remove redundant dl_clear_root_domain call
sched/deadline: Rebuild root domain accounting after every update
sched/deadline: Generalize unique visiting of root domains
sched/topology: Wrappers for sched_domains_mutex
sched/deadline: Ignore special tasks when rebuilding domains
tracing: Use preempt_model_str()
xtensa: Rely on generic printing of preemption model
x86: Rely on generic printing of preemption model
s390: Rely on generic printing of preemption model
...
Pull objtool updates from Ingo Molnar:
- The biggest change is the new option to automatically fail the build
on objtool warnings: CONFIG_OBJTOOL_WERROR.
While there are no currently known unfixed false positives left, such
an expansion in the severity of objtool warnings inevitably creates a
risk of build failures, so it's disabled by default and depends on
!COMPILE_TEST, so it shouldn't be enabled on
allyesconfig/allmodconfig builds and won't be forced on people who
just accept build-time defaults in 'make oldconfig'.
While the option is strongly recommended, only people who enable it
explicitly should see it.
(Josh Poimboeuf)
- Disable branch profiling in noinstr code with a broad brush that
includes all of arch/x86/ and kernel/sched/. (Josh Poimboeuf)
- Create backup object files on objtool errors and print exact objtool
arguments to make failure analysis easier (Josh Poimboeuf)
- Improve noreturn handling (Josh Poimboeuf)
- Improve rodata handling (Tiezhu Yang)
- Support jump tables, switch tables and goto tables on LoongArch
(Tiezhu Yang)
- Misc cleanups and fixes (Josh Poimboeuf, David Engraf, Ingo Molnar)
* tag 'objtool-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
tracing: Disable branch profiling in noinstr code
objtool: Use O_CREAT with explicit mode mask
objtool: Add CONFIG_OBJTOOL_WERROR
objtool: Create backup on error and print args
objtool: Change "warning:" to "error:" for --Werror
objtool: Add --Werror option
objtool: Add --output option
objtool: Upgrade "Linked object detected" warning to error
objtool: Consolidate option validation
objtool: Remove --unret dependency on --rethunk
objtool: Increase per-function WARN_FUNC() rate limit
objtool: Update documentation
objtool: Improve __noreturn annotation warning
objtool: Fix error handling inconsistencies in check()
x86/traps: Make exc_double_fault() consistently noreturn
LoongArch: Enable jump table for objtool
objtool/LoongArch: Add support for goto table
objtool/LoongArch: Add support for switch table
objtool: Handle PC relative relocation type
objtool: Handle different entry size of rodata
...
Pull RCU updates from Boqun Feng:
"Documentation:
- Add broken-timing possibility to stallwarn.rst
- Improve discussion of this_cpu_ptr(), add raw_cpu_ptr()
- Document self-propagating callbacks
- Point call_srcu() to call_rcu() for detailed memory ordering
- Add CONFIG_RCU_LAZY delays to call_rcu() kernel-doc header
- Clarify RCU_LAZY and RCU_LAZY_DEFAULT_OFF help text
- Remove references to old grace-period-wait primitives
srcu:
- Introduce srcu_read_{un,}lock_fast(), which is similar to
srcu_read_{un,}lock_lite(): avoid smp_mb()s in lock and unlock
at the cost of calling synchronize_rcu() in synchronize_srcu()
Moreover, by returning the percpu offset of the counter at
srcu_read_lock_fast() time, srcu_read_unlock_fast() can avoid
extra pointer dereferencing, which makes it faster than
srcu_read_{un,}lock_lite()
srcu_read_{un,}lock_fast() are intended to replace
rcu_read_{un,}lock_trace() if possible
RCU torture:
- Add get_torture_init_jiffies() to return the start time of the test
- Add a test_boost_holdoff module parameter to allow delaying
boosting tests when building rcutorture as built-in
- Add grace period sequence number logging at the beginning and end
of failure/close-call results
- Switch to hexadecimal for the expedited grace period sequence
number in the rcu_exp_grace_period trace point
- Make cur_ops->format_gp_seqs take buffer length
- Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
- Complain when invalid SRCU reader_flavor is specified
- Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing, which forces SRCU
uses atomics even when percpu ops are NMI safe, and use the Kconfig
for SRCU lockdep testing
Misc:
- Split rcu_report_exp_cpu_mult() mask parameter and use for tracing
- Remove READ_ONCE() for rdp->gpwrap access in __note_gp_changes()
- Fix get_state_synchronize_rcu_full() GP-start detection
- Move RCU Tasks self-tests to core_initcall()
- Print segment lengths in show_rcu_nocb_gp_state()
- Make RCU watch ct_kernel_exit_state() warning
- Flush console log from kernel_power_off()
- rcutorture: Allow a negative value for nfakewriters
- rcu: Update TREE05.boot to test normal synchronize_rcu()
- rcu: Use _full() API to debug synchronize_rcu()
Make RCU handle PREEMPT_LAZY better:
- Fix header guard for rcu_all_qs()
- rcu: Rename PREEMPT_AUTO to PREEMPT_LAZY
- Update __cond_resched comment about RCU quiescent states
- Handle unstable rdp in rcu_read_unlock_strict()
- Handle quiescent states for PREEMPT_RCU=n, PREEMPT_COUNT=y
- osnoise: Provide quiescent states
- Adjust rcutorture with possible PREEMPT_RCU=n && PREEMPT_COUNT=y
combination
- Limit PREEMPT_RCU configurations
- Make rcutorture senario TREE07 and senario TREE10 use
PREEMPT_LAZY=y"
* tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (59 commits)
rcutorture: Make scenario TREE07 build CONFIG_PREEMPT_LAZY=y
rcutorture: Make scenario TREE10 build CONFIG_PREEMPT_LAZY=y
rcu: limit PREEMPT_RCU configurations
rcutorture: Update ->extendables check for lazy preemption
rcutorture: Update rcutorture_one_extend_check() for lazy preemption
osnoise: provide quiescent states
rcu: Use _full() API to debug synchronize_rcu()
rcu: Update TREE05.boot to test normal synchronize_rcu()
rcutorture: Allow a negative value for nfakewriters
Flush console log from kernel_power_off()
context_tracking: Make RCU watch ct_kernel_exit_state() warning
rcu/nocb: Print segment lengths in show_rcu_nocb_gp_state()
rcu-tasks: Move RCU Tasks self-tests to core_initcall()
rcu: Fix get_state_synchronize_rcu_full() GP-start detection
torture: Make SRCU lockdep testing use srcu_read_lock_nmisafe()
srcu: Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing
rcutorture: Complain when invalid SRCU reader_flavor is specified
rcutorture: Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
rcutorture: Make cur_ops->format_gp_seqs take buffer length
rcutorture: Add ftrace-compatible timestamp to GP# failure/close-call output
...
Pull sched_ext updates from Tejun Heo:
- Add mechanism to count and report internal events. This significantly
improves visibility on subtle corner conditions.
- The default idle CPU selection logic is revamped and improved in
multiple ways including being made topology aware.
- sched_ext was disabling ttwu_queue for simplicity, which can be
costly when hardware topology is more complex. Implement
SCX_OPS_ALLOWED_QUEUED_WAKEUP so that BPF schedulers can selectively
enable ttwu_queue.
- tools/sched_ext updates to improve compatibility among others.
- Other misc updates and fixes.
- sched_ext/for-6.14-fixes were pulled a few times to receive
prerequisite fixes and resolve conflicts.
* tag 'sched_ext-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (42 commits)
sched_ext: idle: Refactor scx_select_cpu_dfl()
sched_ext: idle: Honor idle flags in the built-in idle selection policy
sched_ext: Skip per-CPU tasks in scx_bpf_reenqueue_local()
sched_ext: Add trace point to track sched_ext core events
sched_ext: Change the event type from u64 to s64
sched_ext: Documentation: add task lifecycle summary
tools/sched_ext: Provide a compatible helper for scx_bpf_events()
selftests/sched_ext: Add NUMA-aware scheduler test
tools/sched_ext: Provide consistent access to scx flags
sched_ext: idle: Fix scx_bpf_pick_any_cpu_node() behavior
sched_ext: idle: Introduce scx_bpf_nr_node_ids()
sched_ext: idle: Introduce node-aware idle cpu kfunc helpers
sched_ext: idle: Per-node idle cpumasks
sched_ext: idle: Introduce SCX_OPS_BUILTIN_IDLE_PER_NODE
sched_ext: idle: Make idle static keys private
sched/topology: Introduce for_each_node_numadist() iterator
mm/numa: Introduce nearest_node_nodemask()
nodemask: numa: reorganize inclusion path
nodemask: add nodes_copy()
tools/sched_ext: Sync with scx repo
...
