Use DRM's shadow-plane helper to map and access the GEM object's buffer
within kernel address space. Encapsulates the vmap logic in the GEM-DMA
helpers.
The sharp-memory driver currently reads the vaddr field from the GME
buffer object directly. This only works because GEM code 'automagically'
sets vaddr.
Shadow-plane helpers perform the same steps, but with correct abstraction
behind drm_gem_vmap(). The shadow-plane state provides the buffer address
in kernel address space and the format-conversion state.
v2:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250627152327.8244-1-tzimmermann@suse.de
Use DRM's shadow-plane helper to map and access the GEM object's buffer
within kernel address space. Encapsulates the vmap logic in the GEM-DMA
helpers.
The repaper driver currently reads the vaddr field from the GME buffer
object directly. This only works because GEM code 'automagically' sets
vaddr.
Shadow-plane helpers perform the same steps, but with correct abstraction
behind drm_gem_vmap(). The shadow-plane state provides the buffer address
in kernel address space and the format-conversion state.
v2:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250627152422.8399-1-tzimmermann@suse.de
For non-leaf paging structures we end up selecting a random index
between [0, 3], depending on the first user if the page-table is shared,
since non-leaf structures only have two bits in the HW for encoding the
PAT index, and here we are just passing along the full user provided
index, which can be an index as large as ~31 on xe2+. The user provided
index is meant for the leaf node, which maps the actual BO pages where
we have more PAT bits, and not the non-leaf nodes which are only mapping
other paging structures, and so only needs a minimal PAT index range.
Also the chosen index might need to consider how the driver mapped the
paging structures on the host side, like wc vs wb, which is separate
from the user provided index.
With that move the PDE PAT index selection under driver control. For now
just use a coherent index on platforms with page-tables that are cached
on host side, and incoherent otherwise. Using a coherent index could
potentially be expensive, and would be overkill if we know the page-table
is always uncached on host side.
v2 (Stuart):
- Add some documentation and split into separate helper.
BSpec: 59510
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250808103455.462424-2-matthew.auld@intel.com
The debug logging in gud_disconnect() adds zero detail and is
unnecessary, as it only prints the function name.
The same functionality can be achieved by using ftrace, and is
highlighted by checkpatch, stating the same.
This patch removes the debug log in the gud_disconnect() function.
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250721232210.12578-1-rubenru09@aol.com
GCC 16 enables -Werror=unused-but-set-variable= which results in build
error with the following message.
drivers/gpu/drm/radeon/r600_cs.c: In function ‘r600_texture_size’:
drivers/gpu/drm/radeon/r600_cs.c:1411:29: error: variable ‘level’ set but not used [-Werror=unused-but-set-variable=]
1411 | unsigned offset, i, level;
| ^~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:287: drivers/gpu/drm/radeon/r600_cs.o] Error 1
level although is set, but in never used in the function
r600_texture_size. Thus resulting in dead code and this error getting
triggered.
Fixes: 60b212f8dd ("drm/radeon: overhaul texture checking. (v3)")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
-Fix close and open lid may cause eDP remaining blank
-Fix frequently disabling/enabling OTG may cause incorrect
configuration of OTG
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
The user closed the lid while the system was powering on and opened it
again before the “apply_seamless_boot_optimization” was set to false,
resulting in the eDP remaining blank.
Reset the “apply_seamless_boot_optimization” to false when dpms off.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Danny Wang <Danny.Wang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Customer reported an issue that OS starts and stops device multiple times
during driver installation. Frequently disabling and enabling OTG may
prevent OTG from being safely disabled and cause incorrect configuration
upon the next enablement.
[How]
Add a wait until OTG_CURRENT_MASTER_EN_STATE is cleared as a short term
solution.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: TungYu Lu <tungyu.lu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During a DPC error kernel waits for the link to be active before
notifying downstream devices. On certain platforms with Broadcom switch
in synthetiic mode, switch responds with values even though the link is
not fully ready. The config space restoration done by pcie port driver
for SWUS/DS of dGPU is thus not effective as the switch is still doing
internal enumeration.
As a workaround, save state of SWUS/DS device in driver. Add additional
check to see if link is active and restore the values during DPC error
callbacks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clamp writes to power limits powerX_crit/currX_crit, powerX_cap,
powerX_max, to the maximum supported by the pcode mailbox
when sysfs-provided values exceed this limit.
Although the pcode already performs clamping, values beyond the pcode
mailbox's supported range get truncated, leading to incorrect
critical power settings.
This patch ensures proper clamping to prevent such truncation.
v2:
- Address below review comments. (Riana)
- Split comments into multiple sentences.
- Use local variables for readability.
- Add a debug log.
- Use u64 instead of unsigned long.
v3:
- Change drm_dbg logs to drm_info. (Badal)
v4:
- Rephrase the drm_info log. (Rodrigo, Riana)
- Rename variable max_mbx_power_limit to max_supp_power_limit, as
limit is same for platforms with and without mailbox power limit
support.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 92d44a422d ("drm/xe/hwmon: Expose card reactive critical power")
Fixes: fb1b70607f ("drm/xe/hwmon: Expose power attributes")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250808185310.3466529-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
struct nouveau_channel contains the member 'accel_done' and a forgotten
TODO which hints at that mechanism being removed in the "near future".
Since that variable is read nowhere anymore, this "near future" is now.
Remove the variable and the TODO.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250801074531.79237-2-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
snprintf() returns the number of characters that *would* have been
written, which can overestimate how much you actually wrote to the
buffer in case of truncation. That leads to 'data += this' advancing
the pointer past the end of the buffer and size going negative.
Switching to scnprintf() prevents potential buffer overflows and ensures
consistent behavior when building the output string.
Signed-off-by: Seyediman Seyedarab <ImanDevel@gmail.com>
Link: https://lore.kernel.org/r/20250724195913.60742-1-ImanDevel@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
Pull drm fixes from Dave Airlie:
"This is the fixes that built up in the merge window, mostly amdgpu and
xe with one i915 display fix, seems like things are pretty good for
rc1.
i915:
- DP LPFS fixes
xe:
- SRIOV: PF fixes and removal of need of module param
- Fix driver unbind around Devcoredump
- Mark xe driver as BROKEN if kernel page size is not 4kB
amdgpu:
- GC 9.5.0 fixes
- SMU fix
- DCE 6 DC fixes
- mmhub client ID fixes
- VRR fix
- Backlight fix
- UserQ fix
- Legacy reset fix
- Misc fixes
amdkfd:
- CRIU fix
- Debugfs fix"
* tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/amdgpu: add missing vram lost check for LEGACY RESET
drm/amdgpu/discovery: fix fw based ip discovery
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
amdgpu/amdgpu_discovery: increase timeout limit for IFWI init
drm/amdgpu: Update SDMA firmware version check for user queue support
drm/amdgpu: Add NULL check for asic_funcs
drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value"
drm/amd/display: fix a Null pointer dereference vulnerability
drm/amd/display: Add primary plane to commits for correct VRR handling
drm/amdgpu: update mmhub 3.3 client id mappings
drm/amdgpu: update mmhub 3.0.1 client id mappings
drm/amdgpu: Retain job->vm in amdgpu_job_prepare_job
drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.
drm/amd/display: Don't overwrite dce60_clk_mgr
drm/amdkfd: Fix checkpoint-restore on multi-xcc
drm/amd: Restore cached manual clock settings during resume
drm/amd: Restore cached power limit during resume
drm/amdgpu: Update external revid for GC v9.5.0
drm/amdgpu: Update supported modes for GC v9.5.0
Mark xe driver as BROKEN if kernel page size is not 4kB
...
Split the vmbind case into a separate helper function
submit_lock_objects_vmbind() to fix objtool warning:
drivers/gpu/drm/msm/msm.o: warning: objtool: submit_lock_objects+0x451:
sibling call from callable instruction with modified stack frame
The drm_exec_until_all_locked() macro uses computed gotos internally
for its retry loop. Having return statements inside this macro, or
immediately after it in certain code paths, confuses objtool's static
analysis of stack frames, causing it to incorrectly flag tail call
optimizations.
Fixes: 92395af63a ("drm/msm: Add VM_BIND submitqueue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/667539/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Detect and handle the special case of a MAP op simply updating the vma
flags of an existing vma, and skip the pgtable updates. This allows
turnip to set the MSM_VMA_DUMP flag on an existing mapping without
requiring additional synchronization against commands running on the
GPU.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/667238/
Currently the pointer minor is being dereferenced before it is null
checked, leading to a potential null pointer dereference issue. Fix this
by dereferencing the pointer only after it has been null checked. Also
Replace minor->dev with dev.
Fixes: 4f89cf40d0 ("drm/msm: bail out late_init_minor() if it is not a GPU device")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/666259/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
With non-page aligned copy, we need to use 4 byte aligned pitch, however
the size itself might still be close to our maximum of ~8M, and so the
dimensions of the copy can easily exceed the S16_MAX limit of the copy
command leading to the following assert:
xe 0000:03:00.0: [drm] Assertion `size / pitch <= ((s16)(((u16)~0U) >> 1))` failed!
platform: BATTLEMAGE subplatform: 1
graphics: Xe2_HPG 20.01 step A0
media: Xe2_HPM 13.01 step A1
tile: 0 VRAM 10.0 GiB
GT: 0 type 1
WARNING: CPU: 23 PID: 10605 at drivers/gpu/drm/xe/xe_migrate.c:673 emit_copy+0x4b5/0x4e0 [xe]
To fix this account for the pitch when calculating the number of current
bytes to copy.
Fixes: 270172f64b ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-7-matthew.auld@intel.com
If the buf + offset is not aligned to XE_CAHELINE_BYTES we fallback to
using a bounce buffer. However the bounce buffer here is allocated on
the stack, and the only alignment requirement here is that it's
naturally aligned to u8, and not XE_CACHELINE_BYTES. If the bounce
buffer is also misaligned we then recurse back into the function again,
however the new bounce buffer might also not be aligned, and might never
be until we eventually blow through the stack, as we keep recursing.
Instead of using the stack use kmalloc, which should respect the
power-of-two alignment request here. Fixes a kernel panic when
triggering this path through eudebug.
v2 (Stuart):
- Add build bug check for power-of-two restriction
- s/EINVAL/ENOMEM/
Fixes: 270172f64b ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-6-matthew.auld@intel.com
We want to get rid of triggering "Frame Change" events from
frontbuffer flush calls. We are about to move using TRANS_PUSH
register for this on LunarLake and onwards. Touching TRANS_PUSH
register from fronbuffer flush would be problematic as it's written by
DSB as well.
Fix this by using intel_psr_exit when flush or invalidate is done on
LunarLake and onwards. This is not possible on AlderLake and
MeteorLake due to HW bug in PSR2 disable.
This patch is also fixing problems with cursor plane where cursor is
disappearing or duplicate cursor is seen on the screen.
v2: Commit message updated
Bspec: 68927, 68934, 66624
Reported-by: Janna Martl <janna.martl109@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5522
Fixes: 411ad63877 ("drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards")
Tested-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250801062905.564453-1-jouni.hogander@intel.com
