Add clock controller support for Peripheral Connectivity 0 and 1 blocks.
These provide clocks for USI, I2C and UART peripherals.
Some clocks need to be marked as critical to prevent system hang when
disabled.
Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add below clock PLL support for Axis ARTPEC-8 SoC platform:
- pll_1017x: Integer PLL with mid frequency FVCO (950 to 2400 MHz)
This is used in ARTPEC-8 SoC for shared PLL
- pll_1031x: Integer/Fractional PLL with mid frequency FVCO
(600 to 1200 MHz)
This is used in ARTPEC-8 SoC for Audio PLL
FOUT calculation for pll_1017x and pll_1031x:
FOUT = (MDIV x FIN)/(PDIV x 2^SDIV) for integer PLL
FOUT = (((MDIV + KDIV)/65536) x FIN)/(PDIV x 2^SDIV) for fractional PLL
Signed-off-by: Hakyeong Kim <hgkim05@coasia.com>
Signed-off-by: SeonGu Kang <ksk4725@coasia.com>
Signed-off-by: Ravi Patel <ravi.patel@samsung.com>
Link: https://lore.kernel.org/r/20250825114436.46882-3-ravi.patel@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The CLKS_NR_CPUCL0 macro was incorrectly defined based on a wrong clock ID.
It mistakenly referenced CLK_DOUT_CLUSTER0_PERIPHCLK, which corresponds to
a cluster peripheral clock, not the last clock ID for CPUCL0 as intended.
This patch corrects the definition to use CLK_DOUT_CPUCL0_NOCP + 1,
properly matching the last clock ID for CPUCL0 as intended.
This error was due to confusion with the hardware diagram, and this patch
ensures that the number of clocks for CPUCL0 is correctly defined.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-4-shin.son@samsung.com
Fixes: 59636ec89c ("clk: samsung: exynosautov920: add cpucl0 clock support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Register compatible and cmu_info data to support clock CPUCL1/2
(CPU Cluster 1 and CPU Cluster 2),
these provide clock for CPUCL1/2_SWTICH/CLUSTER.
These clocks are required early during boot for the CPUs,
so they are declared using CLK_OF_DECLARE instead of being registered
through a platform driver.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-3-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Pull clk updates from Stephen Boyd:
"Here's the pile of clk driver patches. The usual suspects^Wsilicon
vendors are all here, adding new SoC support and fixing existing code.
There are a few patches to the clk framework here as well. They've
been baking in linux-next for weeks so I'm hoping we don't have to
revert them. The disable OF node patch is probably the scariest one
although it seems unlikely that a system would be relying on a driver
_not_ probing because the clk never appeared, but you never know.
Nothing looks out of the ordinary on the driver side but that's
because it's mostly a bunch of data.
Core:
- Use dev_err_probe() in the clk registration path (Peering into the
crystal ball shows many patches that remove printks)
- Check for disabled OF nodes in of_clk_get_hw_from_clkspec()
New Drivers:
- Allwinner A523/T527 clk driver
- Qualcomm IPQ9574 NSS clk driver
- Qualcomm QCS8300 GPU and video clk drivers
- Qualcomm SDM429 RPM clks
- Qualcomm QCM6490 LPASS (low power audio) resets
- Samsung Exynos2200: driver for several clock controllers (Alive,
CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
- Samsung Exynos7870: Driver for several clock controllers (Alive,
MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI)
- Rockchip rk3528 and rk3562 clk driver
Updates:
- Various fixes to SoC clk drivers for incorrect data, avoid touching
protected registers, etc.
- Additions for some missing clks in existing SoC clk drivers
- DT schema conversions from text to YAML
- Kconfig cleanups to allow drivers to be compiled on moar
architectures"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
dt-bindings: reset: fix double id on rk3562-cru reset ids
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: davinci: remove support for da830
...
EARLY_WAKEUP_SW_TRIG_*_SET and EARLY_WAKEUP_SW_TRIG_*_CLEAR
registers are only writeable. Attempting to read these registers
during samsung_clk_save() causes a synchronous external abort.
Remove these 8 registers from cmu_top_clk_regs[] array so that
system suspend gets further.
Note: the code path can be exercised using the following command:
echo mem > /sys/power/state
Fixes: 2c597bb7d6 ("clk: samsung: clk-gs101: Add cmu_top, cmu_misc and cmu_apm support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250303-clk-suspend-fix-v1-1-c2edaf66260f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CMU_TOP is the top level clock management unit which contains PLLs,
muxes, dividers and gates that feed the other clock management units.
CMU_ALIVE provides clocks for SPMI, the new MCT and other clock
management units
CMU_CMGP provides clocks for USI blocks
CMU_HSI0 provides clocks for USB
CMU_PERIC0 provides clocks for USI4 and I3C blocks
CMU_PERIC1 provides clocks for USI blocks
CMU_PERIC2 provides clocks for USI and I3C blocks
CMU_PERIS provides clocks for GIC and the legacy MCT
CMU_UFS provides clocks for UFS
CMU_VTS provides clocks for other clock management units
like CMU_AUD, which will be added in the future.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250223115601.723886-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
pll4311 (also known in the vendor kernel as frd_4311_rpll) is a PLL used
in the Exynos2200 SoC. It's an integer/fractional PLL with mid frequency
FVCO (650 to 3500Mhz).
The PLL is functionally similar enough to pll531x, so the same code can
handle both.
Locktime for pll4311 is 500 - the same as the pll531x lock factor. MDIV,
PDIV, SDIV and FDIV masks and bit shifts are also the same as pll531x.
When defining a PLL, the "con" parameter should be set to CON3
register, like this:
PLL(pll_4311, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0, NULL),
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250223115601.723886-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to
dereferencing `ctx->clk_data.hws` before setting
`ctx->clk_data.num = nr_clks`. Move that up to fix the crash.
UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
<snip>
Call trace:
samsung_clk_init+0x110/0x124 (P)
samsung_clk_init+0x48/0x124 (L)
samsung_cmu_register_one+0x3c/0xa0
exynos_arm64_register_cmu+0x54/0x64
__gs101_cmu_top_of_clk_init_declare+0x28/0x60
...
Fixes: e620a1e061 ("drivers/clk: convert VL struct to struct_size")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20250212183253.509771-1-willmcvicker@google.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CMU_TOP is the top level clock management unit which contains PLLs, muxes,
dividers and gates that feed the other clock management units.
CMU_PERIS provides clocks for GIC and MCT
CMU_FSYS0 provides clocks for USBDRD30
CMU_FSYS1 provides clocks for MMC, UFS and PCIE
CMU_PERIC0 provides clocks for UART_DBG, USI00 ~ USI03
CMU_PERIC1 provides clocks for SPI_CAM0/1, UART_BT, USI04 ~ USI13,
HSI2C_CAM0/1/2/3
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20241023090136.537395-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
These plls are found in the Exynos8895 SoC:
- pll1051x: Integer PLL with middle frequency
- pll1052x: Integer PLL with low frequency
The PLLs are similar enough to pll_0822x, so the same code can handle
all.
Locktime for 1051x, 1052x is 150 - the same as the pll_0822x
lock factor. MDIV, SDIV, PDIV masks and bit shifts are also the same
as 0822x.
When defining a PLL, the "con" parameter should be set to CON0
register, like this:
PLL(pll_1051x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON0_PLL_SHARED0,
pll_shared0_rate_table),
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20241023090136.537395-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Enabling UFSHCD_CAP_HIBERN8_WITH_CLK_GATING in the UFS driver means
all UFS clocks are gated/ungated, which leads to the UFS IP getting
into a bad state and being completely non functional.
Downstream these clocks are all left in Automatic Clock Gate (ACG)
mode, and are not exposed to the UFS driver in DT. Enabling ACG is
ultimately what we need to do in the upstream Samsung clock driver
as well.
However until ACG is enabled upstream, we mark these clocks as
critical to avoid them being disabled. This then allow us to enable
UFSHCD_CAP_HIBERN8_WITH_CLK_GATING and have UFS hibern8.
Whilst this may seem at first glance a strange thing to do, the clocks
between UFS host and UFS device are still gated after this change, and
enabling UFS hibern8 leads to substantially cooler device when running
the upstream kernel on a Pixel 6 phone. This change only effects the
clocks from the CMU to the UFS IP.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241018130215.487425-1-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung clock controller fixes for v6.12
Add missing sentinel in of_device_id table, so the code iterating over
it will not go over the size of an array.
Further code depends on the fixes branch.
Currently, there is no terminator entry for exynosautov920_cmu_of_match,
hence facing below KASAN warning,
BUG: KASAN: global-out-of-bounds in of_match_node+0x120/0x13c
Read of size 1 at addr ffffffe31cc9e628 by task swapper/0/1
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0+ #334
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x90/0xd0
print_report+0x1f4/0x5b4
kasan_report+0xc8/0x110
__asan_report_load1_noabort+0x20/0x2c
of_match_node+0x120/0x13c
of_match_device+0x70/0xb4
platform_match+0xa0/0x25c
__device_attach_driver+0x7c/0x2d4
bus_for_each_drv+0x100/0x188
__device_attach+0x174/0x364
device_initial_probe+0x14/0x20
bus_probe_device+0x128/0x158
device_add+0xb3c/0x10fc
of_device_add+0xdc/0x150
of_platform_device_create_pdata+0x120/0x20c
of_platform_bus_create+0x2bc/0x620
of_platform_populate+0x58/0x108
of_platform_default_populate_init+0x100/0x120
do_one_initcall+0x110/0x788
kernel_init_freeable+0x44c/0x61c
kernel_init+0x24/0x1e4
ret_from_fork+0x10/0x20
The buggy address belongs to the variable:
exynosautov920_cmu_of_match+0xc8/0x2c80
Add a dummy terminator entry at the end to assist of_match_node() in
traversing up to the terminator entry without accessing an
out-of-boundary index.
Fixes: 485e13fe2f ("clk: samsung: add top clock support for ExynosAuto v920 SoC")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240927102104.3268790-1-ruanjinjie@huawei.com
[krzk: drop trailing comma]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all clk drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240909144026.870565-2-u.kleine-koenig@baylibre.com
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Exynos7885 SoC has a DWC3 USB Controller with Exynos USB PHY which in
theory supports USB3 SuperSpeed, but is only used as USB2 in all known
devices.
These clocks are needed for everything related to USB.
While at it, also remove the CLK_SET_RATE_PARENT capability of
CLK_MOUT_FSYS_USB30DRD_USER, since it's not actually needed.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240816175034.769628-3-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
pll1418x is used in Exynos7885 SoC for USB PHY clock.
Operation-wise it is very similar to pll0822x, except that MDIV is only
9 bits wide instead of 10, and we use the CON1 register in the PLL
macro's "con" parameter instead of CON3 like this:
PLL(pll_1418x, CLK_FOUT_USB_PLL, "fout_usb_pll", "oscclk",
PLL_LOCKTIME_PLL_USB, PLL_CON0_PLL_USB,
pll_usb_rate_table),
Technically the PLL should work fine with pll0822x code if the PLL
tables are correct, but it's more "correct" to actually update the mask.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240816175034.769628-2-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
