Merge "Renesas ARM Based SoC soc-cleanup Updates for v3.16" from Simon Horman:
r8a7791 (R-Car H2) SoC and its Koelsch board and,
r8a7740 (R-Mobile A1) SoC and its Armadillo800eva board
* Set CPU clock frequency from OF nodes
* tag 'renesas-soc-cleanup-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Set clock frequency in HZ from OF nodes
ARM: shmobile: Use shmobile_init_late() on r8a7740
ARM: shmobile: Remove unused r8a7791_init_early()
ARM: shmobile: Use r8a7791 DT CPU Frequency for Koelsch
ARM: shmobile: Use r8a7791 DT CPU Frequency in common case
ARM: shmobile: Remove unused r8a7740_init_delay()
ARM: shmobile: Use r8a7740 DT CPU Frequency for Armadillo DT Ref
ARM: shmobile: Use r8a7740 DT CPU Frequency in common case
ARM: shmobile: Add r8a7740 Maximum CPU Frequency to DTS
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "Second Round of Renesas ARM Based SoC Clock Updates for v3.16" from
Simon Horman:
r8a7791 (R-Car M2) SoC
* Correct SYS-DMAC clock defines
r8a7740 (R-Mobile A1) SoC
* Correct name of DT Ethernet clock
* tag 'renesas-clock2-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7791: Correct SYS-DMAC clock defines
ARM: shmobile: r8a7740: Correct name of DT Ethernet clock
Signed-off-by: Olof Johansson <olof@lixom.net>
Bring in the cleanup branch due to conflicts in new additions. Should really
have been the base before the other branch, but this way works too.
* cleanup/kconfig:
ARM: qcom: clean-up unneeded kconfig selects
ARM: bcm: clean-up unneeded kconfig selects
ARM: mvebu: clean-up unneeded kconfig selects
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: mvebu: SoC changes for v3.16" from Jason Cooper:
mvebu SoC changes for v3.16
- Armada 375/38x coherency support
- Armada 375/38x SMP support
- mvebu PMSU and CPU reset support
- Armada 370/XP cpuidle support
- kirkwood remove platform init of audio device
- small fixes and cleanup for new SoC (375/38x)
Note:
- due to complex deps, cpuidle changes Acked by appropriate maintainer for
going though arm-soc tree.
* tag 'mvebu-soc-3.16' of git://git.infradead.org/linux-mvebu: (46 commits)
ARM: mvebu: Fix pmsu compilation when ARMv6 is selected
ARM: mvebu: conditionalize Armada 375 coherency workaround
ARM: mvebu: conditionalize Armada 375 SMP workaround
ARM: mvebu: add Armada 375 A0 revision definition
ARM: mvebu: initialize mvebu-soc-id earlier
ARM: mvebu: fix thermal quirk SoC revision check
ARM: Kirkwood: t5325: Remove platform device to instantiate audio
ARM: Kirkwood: Remove platform driver for codec
ARM: mvebu: Add thermal quirk for the Armada 375 DB board
ARM: mvebu: Select HAVE_ARM_TWD only if SMP is enabled
ARM: mvebu: fix the name of the parameter used in mvebu_get_soc_id
ARM: mvebu: remove unnecessary ifdef around l2x0_of_init
ARM: mvebu: register the cpuidle driver for the Armada XP SoCs
cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC
ARM: mvebu: Register notifier callback for the cpuidle transition
ARM: mvebu: refine which files are build in mach-mvebu
ARM: mvebu: Add the PMSU related part of the cpu idle functions
ARM: mvebu: Allow to power down L2 cache controller in idle mode
ARM: mvebu: Low level function to disable HW coherency support
ARM: mvebu: Split low level functions to manipulate HW coherency
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: mvebu: SoC orion5x DT conversion for v3.16" from Jason Cooper:
mvebu SoC orion5x DT conversion for v3.16
- orion5x
- convert to DT
* tag 'mvebu-soc-orion5x-3.16' of git://git.infradead.org/linux-mvebu: (29 commits)
ARM: orion: remove no longer needed gpio DT code
ARM: orion: remove no longer needed DT IRQ code
ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree
ARM: orion5x: convert d2net to Device Tree
ARM: orion5x: convert RD-88F5182 to Device Tree
ARM: orion5x: remove unneeded code for edmini_v2
ARM: orion5x: keep TODO list in edmini_v2 DT
ARM: orion5x: use DT to describe NOR on edmini_v2
ARM: orion5x: use DT to describe EHCI on edmini_v2
ARM: orion5x: use DT to describe I2C devices on edmini_v2
ARM: orion5x: convert edmini_v2 to DT pinctrl
ARM: orion5x: add standard pinctrl configs for sata0 and sata1
ARM: orion5x: add Device Bus description at SoC level
ARM: orion5x: update I2C description at SoC level
ARM: orion5x: enable pinctrl driver at SoC level
ARM: orion5x: switch to DT interrupts and timer
ARM: orion: switch to a per-platform handle_irq() function
ARM: orion5x: convert to use 'clocks' property for UART controllers
ARM: orion5x: switch to use the clock driver for DT platforms
ARM: orion5x: add interrupt for Ethernet in Device Tree
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "at91: cleanup for 3.16 #1" from Nicolas Ferre:
First cleanup series for 3.15
- localize GPIO header in mach-at91 directory
- big update on the CCF front with main and slow clocks
- a cleanup of ADC and touchscreen driver with unification on IIO and
removal of old driver
[olof: Most of this branch is new code, not cleanups, so I'm merging this into
the SoC branch in spite of the branch name]
* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: (28 commits)
ARM: at91/dt: at91-cosino_mega2560 remove useless tsadcc node
ARM: at91: remove atmel_tsadcc platform_data
Input: atmel_tsadcc: remove driver
ARM: at91: remove atmel_tsadcc from sama5_defconfig
ARM: at91: sam9rl: switch from atmel_tsadcc to at91_adc
ARM: at91: sam9g45: switch from atmel_tsadcc to at91_adc
ARM: at91: sam9rlek add touchscreen support through at91_adc
ARM: at91: sam9rl: add at91_adc to support adc and touchscreen
iio: adc: at91: add sam9rl support
iio: adc: at91: remove unused include from include/mach
ARM: at91: sam9m10g45ek: Add touchscreen support through at91_adc
iio: adc: at91_adc: Add support for touchscreens without TSMR
iio: adc: at91: cleanup platform_data
ARM: at91: sam9260: remove unused platform_data
ARM: at91: sam9g45: remove unused platform_data
ARM: at91/dt: define sam9rlek crystal frequencies
ARM: at91/dt: move at91sam9rl SoC to the new slow/main clock models
ARM: at91/dt: define main xtal frequency of the at91sam9261ek board
ARM: at91/dt: move at91sam9261 SoC to the new main clock model
ARM: at91/dt: add xtal frequencies to sama5d3 xplained board
...
Signed-off-by: Olof Johansson <olof@lixom.net>
shmobile_init_delay() looks for OF "clock-frequency" to determine
the delay which is set by calling shmobile_setup_delay().
Unfortunately this seems to be incorrect in detail as
"clock-frequency" node values are in HZ whereas the frequency
argument to shmobile_setup_delay() is in MHz.
Provide a variant of shmobile_setup_delay() that accepts HZ to
correct this problem.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car M2 has two MSTP bits for SYS-DMAC, not one.
Also bring the naming in sync with the documentation.
This issue was introduced in v3.14, in commit
4d8864c9e9 ("ARM: shmobile: r8a7791: Add
clock index macros for DT sources").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Convert the Koelsch board support to use shmobile_init_delay()
to be able to migrate away from per-SoC delay setup functions.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Convert the common C-code-less r8a7791 DT board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Convert the Armadillo r8a7740 DT reference board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Convert the common C-code-less r8a7740 DT board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The preferred node name in DT for an Ethernet device is "ethernet".
"sh-eth" was used in preliminary and incomplete bindings.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
When compiling for multiplatform for both ARMv6 and ARMv7, the default compiler
flags are for ARMv6, and we will get:
/tmp/ccwDEzd0.s: Assembler messages:
/tmp/ccwDEzd0.s:639: Error: selected processor does not support ARM mode `isb '
/tmp/ccwDEzd0.s:645: Error: selected processor does not support ARM mode `isb '
/tmp/ccwDEzd0.s:646: Error: selected processor does not support ARM mode `dsb '
/tmp/ccwDEzd0.s:695: Error: selected processor does not support ARM mode `isb '
make[1]: *** [arch/arm/mach-mvebu/pmsu.o] Error 1
Fix this in a similar manner than done previously in commit
72533b77d3, by specifying ARMv7 flags for pmsu.o.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Link: https://lkml.kernel.org/r/1399407782-29091-1-git-send-email-vincent.stehle@laposte.net
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The Armada 375 SMP workaround only needs to be applied to the Z1
revision of the SoC. The A0 and later revisions have been fixed, and
no longer need this workaround.
Note that the initialization of the SMP workaround is delayed from
->smp_prepare_cpus() to ->smp_boot_secondary() because when
->smp_prepare_cpus() is called, the early initcalls have not be
called, so the mvebu-soc-id mechanism is not operational. Since the
workaround is anyway not needed before the secondary CPU is started,
we can delay its implementation until the ->smp_boot_secondary() call.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1399302326-6917-5-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Currently, the mvebu-soc-id logic is initialized through a
core_initcall(). However, we will soon need to know the SoC revision
before booting secondary CPUs, because a workaround affects Armada 375
Z1 steppings, but should not be applied on Armada 375 A0 steppings.
Unfortunately, core_initcall() are called way too late compared to the
SMP initialization. Therefore, the mvebu-soc-id initialization is move
to an early_initcall(), which is called before the SMP initialization.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1399302326-6917-3-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
In commit 54fe26a900bc528f3df1e4235cb6b9ca5c6d4dc2 ('ARM: mvebu: Add
thermal quirk for the Armada 375 DB board'), a check on the Armada SoC
revision was added to decide whether a quirk for the thermal device
should be applied or not.
However, the quirk implementation has a bug: it assumes
mvebu_get_soc_id() returns true on success, but it returns
0. Therefore, the condition:
if (mvebu_get_soc_id(&dev, &rev) && rev > ARMADA_375_Z1_REV)
is always false (as long as mvebu-soc-id is properly initialized). As
a consequence, the quirk is always applied, even on A0 steppings, for
which the quirk should not be applied.
This was spotted by testing the thermal driver on Armada 375 A0, which
Ezequiel could not do since he does not have access to the A0 revision
of the SoC for the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1399302326-6917-2-git-send-email-thomas.petazzoni@free-electrons.com
Fixes: 54fe26a900bc528f3df1e4235cb6b9ca5c6d4dc2 ('ARM: mvebu: Add thermal quirk for the Armada 375 DB board')
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The initial release of the Armada 375 DB board has an Armada 375
Z1 stepping silicon. This commit introduces a quirk that allows
to workaround a series of issues with the thermal sensor in this
stepping, but updating the devicetree:
* Updates the compatible string for the thermal, so the driver
can perform a specific initialization of the sensor.
* Moves the offset of the thermal control register. This quirk
allows to specifiy the correct (A0 stepping) offset in the
devicetree.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1398371004-15807-9-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Actually enabling coherency and adding a CPU on a SMP group are two
different operations which can be done separately. This patch splits
this in two functions.
Moreover as they use common pattern, this patch also creates local low
level functions (ll_get_coherency_base and ll_get_cpuid) to be used by
the exposed functions (ll_add_cpu_to_smp_group and
ll_enable_coherency)
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397488214-20685-6-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
In order to be able to deal with the MMU enabled and the MMU disabled
cases, the base address of the coherency registers was passed to the
function. The address by itself was not interesting as it can't change
for a given SoC, the only thing we need is to have a distinction
between the physical or the virtual address.
This patch add a check of the MMU bit to choose the accurate address,
then the calling function doesn't have to pass this information.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397488214-20685-3-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The pmsu.c driver contained an armada_xp_boot_cpu() function that sets
the boot address of a secondary CPUs and deasserts the reset. However,
the Armada 375 needs a slightly different logic, so it makes more
sense to move this code into the Armada XP specific platsmp.c.
In order to achieve this, the mvebu_pmsu_set_cpu_boot_addr() function
is exported. It will be needed for both the Armada XP and Armada 38x
SMP implementations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397483648-26611-2-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Non-DT irq handlers were working through irq causes from most-significant
to least-significant bit, while DT irqchip driver does it the other way
round. This revealed some more HW issues on Kirkwood peripheral IP, where
spurious sdio irqs can happen although irqs are masked.
Also, the generated binaries show that original non-DT order compared
to DT order save two instructions for each bit count check:
irqchip DT order with ffs():
60: e3a06001 mov r6, #1
64: e2643000 rsb r3, r4, #0
68: e0033004 and r3, r3, r4
6c: e16f3f13 clz r3, r3
70: e263301f rsb r3, r3, #31
74: e1c44316 bic r4, r4, r6, lsl r3
78: e5971004 ldr r1, [r7, #4]
Original non-DT order with fls():
60: e3a07001 mov r7, #1
64: e16f3f14 clz r3, r4
68: e263301f rsb r3, r3, #31
6c: e1c44317 bic r4, r4, r7, lsl r3
70: e5951004 ldr r1, [r5, #4]
Therefore, reverse irq bit handling back to original order by replacing
ffs() with fls().
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lkml.kernel.org/r/1398719528-23607-1-git-send-email-sebastian.hesselbarth@gmail.com
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Some irqchip initialization must be done on secondary CPUs. On mvebu
platforms, this is currently achieved by having the
arch/arm/mach-mvebu/platsmp.c code directly call into a function
exported by the irqchip driver, which isn't really nice.
This commit changes this by using the same solution as the one used in
the GIC driver: the irqchip driver registers a CPU notifier, which is
used to do the secondary CPU IRQ initialization. This way, the irqchip
driver is completely autonomous, and the function no longer needs to
be exposed from the irqchip driver to the SoC code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397483648-26611-6-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
