The amplifier doesn't loose register state in software shutdown mode, so
there is no need to reset the cur_* values.
Without these resets, the amplifier can be turned on after
runtime_suspend without waiting for the program and
profile to be restored.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <aa27ae084150988bf6a0ead7e3403bc485d790f8.1709918447.git.soyer@irl.hu>
Realtek codec on HP Envy laptop series are heavily modified by vendor.
Therefore, need intervention to make it work properly. The patch fixes:
- B&O soundbar speakers (between lid and keyboard) activation
- Enable LED on mute button
- Add missing process coefficient which affects the output amplifier
- Volume control synchronization between B&O soundbar and side speakers
- Unmute headset output on several HP Envy models
- Auto-enable headset mic when plugged
This patch was tested on HP Envy x360 13-AR0107AU with Realtek ALC285
The only unsolved problem is output amplifier of all built-in speakers
is too weak, which causes volume of built-in speakers cannot be loud
as vendor's proprietary driver due to missing _DSD parameter in the
firmware. The solution is currently on research. Expected to has another
patch in the future.
Potential fix to related issues, need test before close those issues:
- https://bugzilla.kernel.org/show_bug.cgi?id=189331
- https://bugzilla.kernel.org/show_bug.cgi?id=216632
- https://bugzilla.kernel.org/show_bug.cgi?id=216311
- https://bugzilla.kernel.org/show_bug.cgi?id=213507
Signed-off-by: Athaariq Ardhiansyah <foss@athaariq.my.id>
Message-ID: <20240310140249.3695-1-foss@athaariq.my.id>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CS35L54 and CS35L57 are Boosted Smart Amplifiers. The CS35L54 has
I2C/SPI control and I2S/TDM audio. The CS35L57 also has SoundWire
control and audio.
The hardware differences between L54, L56 and L57 do not affect the
driver control interface so they can all be handled by the same driver.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240308135900.603192-2-rf@opensource.cirrus.com>
ASoC: Fixes for v6.8
Some more driver specific fixes for v6.8, plus one new x86 platform
quirk. All good fixes to have if you have systems that use the relevant
hardware.
hda_component.h uses hda_codec_dev from sound/hda_codec.h.
Include sound/hda_codec.h instead of assuming that it has already
been included by the parent .c file.
This isn't causing any problems with current code, so no need to
backport to older kernels.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20240307111216.45053-2-rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the conventional include guards around the content of the
hda_component.h header file. This prevents double-declaration of
struct hda_component if the header gets included multiple times.
This isn't causing any problems with current code, so no need to
backport to older kernels.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-ID: <20240307111216.45053-1-rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Timing select registers for SRC and CMD are by default
referring to the corresponding SSI word select.
The calculation rule from HW spec skips SSI8, which has
no clock connection.
>From section 43.2.18 CMD Output Timing Select Register (CMDOUT_TIMSEL),
of R-Car Series, 3rd Generation Hardware User’s Manual Rev.2.20:
CMD0_OUT_DIVCLK_ Output Timing
SEL [4:0] Signal Select
B'0 0110: ssi_ws0
B'0 0111: ssi_ws1
B'0 1000: ssi_ws2
B'0 1001: ssi_ws3
B'0 1010: ssi_ws4
B'0 1011: ssi_ws5
B'0 1100: ssi_ws6
B'0 1101: ssi_ws7
<GAP>
B'0 1110: ssi_ws9
B'0 1111: Setting prohibited
Fix the erroneous prohibited setting of timsel value 1111 (0xf) for SSI9
by using timsel value 1110 (0xe) instead. This is possible because SSI8
is not connected as shown by <GAP> in the table above.
[21.695055] rcar_sound ec500000.sound: b adg[0]-CMDOUT_TIMSEL (32):00000f00/00000f1f
Correct the timsel assignment.
Fixes: 629509c5bc ("ASoC: rsnd: add Gen2 SRC and DMAEngine support")
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andreas Pape <Andreas.Pape4@bosch.com>
Signed-off-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
Tested-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
[erosca: massage commit description]
Signed-off-by: Eugeniu Rosca <eugeniu.rosca@bosch.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240301085003.3057-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If i915 does not support given platform but the hardware i.e.: HDAudio
codec is still there, the codec-probing procedure will succeed for such
device but the follow up initialization will always end up with -ENODEV.
While bus could filter out address '2' which Intel's HDMI/DP codecs
always enumerate on, more robust approach is to check for i915 presence
before registering display codecs.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240226124432.1203798-3-cezary.rojewski@intel.com
When building feature controls from a unit without a name, we try to
derive a name first from the feature unit's input, then fall back to the
output terminal.
If a feature unit connects directly to a "USB Streaming" input terminal
rather than a mixer or other virtual type, the control receives the
somewhat meaningless name "PCM", even if the output had a descriptive
type such as "Headset" or "Speaker".
Here is an example of such AudioControl descriptor from a USB headset
which ends up named "PCM Playback" and is therefore not recognized as
headphones by userspace:
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 4
wTerminalType 0x0101 USB Streaming
bAssocTerminal 5
bNrChannels 2
wChannelConfig 0x0003
Left Front (L)
Right Front (R)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 5
wTerminalType 0x0402 Headset
bAssocTerminal 4
bSourceID 6
iTerminal 0
AudioControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 6
bSourceID 4
bControlSize 2
bmaControls(0) 0x0002
Volume Control
bmaControls(1) 0x0000
bmaControls(2) 0x0000
iFeature 0
Other headsets and DACs I tried that used their output terminal for
naming only did so due to their input being an unnamed sidetone mixer.
Instead of always starting with the input terminal, check the type of it
first. If it seems uninteresting, invert the order and use the output
terminal first for naming.
This makes userspace recognize headsets with simple controls as
headphones, and leads to more consistent naming of playback devices
based on their outputs irrespective of sidetone mixers.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Link: https://lore.kernel.org/r/20240301231107.42679-1-kl@kl.wtf
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clang prior to 17.0.0 has a bug in its asm goto jump scope analysis to
determine that no variables with the cleanup attribute are skipped by an
indirect jump. Instead of only checking the scope of each label that is
a possible target of each asm goto statement, it checks the scope of
every label, which can cause an error when a variable with the cleanup
attribute is used between two asm goto statements with different scopes,
even if they have completely different label targets:
sound/core/hwdep.c:273:8: error: cannot jump from this asm goto statement to one of its possible targets
if (get_user(device, (int __user *)arg))
^
arch/powerpc/include/asm/uaccess.h:295:5: note: expanded from macro 'get_user'
__get_user(x, _gu_addr) : \
^
arch/powerpc/include/asm/uaccess.h:283:2: note: expanded from macro '__get_user'
__get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \
^
arch/powerpc/include/asm/uaccess.h:199:3: note: expanded from macro '__get_user_size_allowed'
__get_user_size_goto(x, ptr, size, __gus_failed); \
^
arch/powerpc/include/asm/uaccess.h:187:10: note: expanded from macro '__get_user_size_goto'
case 1: __get_user_asm_goto(x, (u8 __user *)ptr, label, "lbz"); break; \
^
arch/powerpc/include/asm/uaccess.h:158:2: note: expanded from macro '__get_user_asm_goto'
asm_volatile_goto( \
^
include/linux/compiler_types.h:366:33: note: expanded from macro 'asm_volatile_goto'
#define asm_volatile_goto(x...) asm goto(x)
^
sound/core/hwdep.c:291:9: note: possible target of asm goto statement
if (put_user(device, (int __user *)arg))
^
arch/powerpc/include/asm/uaccess.h:66:5: note: expanded from macro 'put_user'
__put_user(x, _pu_addr) : -EFAULT; \
^
arch/powerpc/include/asm/uaccess.h:52:9: note: expanded from macro '__put_user'
\
^
sound/core/hwdep.c:276:4: note: jump bypasses initialization of variable with __attribute__((cleanup))
scoped_guard(mutex, ®ister_mutex) {
^
include/linux/cleanup.h:169:20: note: expanded from macro 'scoped_guard'
for (CLASS(_name, scope)(args), \
To avoid this issue, move the put_user() call out of the scoped_guard()
scope, which allows the asm goto scope analysis to see that the variable
with the cleanup attribute will never be skipped by the asm goto
statements.
There should be no functional change because prior to the refactoring,
put_user() was not called under register_mutex, so this call does not
even need to be in the scoped_guard() in the first place.
Fixes: e6684d08cc ("ALSA: hwdep: Use guard() for locking")
Closes: https://github.com/ClangBuiltLinux/linux/issues/2003
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240301-fix-snd-hwdep-guard-v1-1-6aab033f3f83@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In azx_probe_codecs function, when bus->codec_mask is becomes to 0(no codecs),
execute azx_init_chip, bus->codec_mask will be initialized to a value again,
this causes snd_hda_codec_new function to run, the process is as follows:
-->snd_hda_codec_new
-->snd_hda_codec_device_init
-->snd_hdac_device_init---snd_hdac_read_parm(...AC_PAR_VENDOR_ID) 2s
---snd_hdac_read_parm(...AC_PAR_VENDOR_ID) 2s
---snd_hdac_read_parm(...AC_PAR_SUBSYSTEM_ID) 2s
---snd_hdac_read_parm(...AC_PAR_REV_ID) 2s
---snd_hdac_read_parm(...AC_PAR_NODE_COUNT) 2s
when no codecs, read communication is error, each command will be polled for
2 second, a total of 10s, it is easy to some problem.
like this:
2 [ 14.833404][ 6] [ T164] hda 0006:00: Codec #0 probe error; disabling it...
3 [ 14.844178][ 6] [ T164] hda 0006:00: codec_mask = 0x1
4 [ 14.880532][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0000
5 [ 15.891988][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0000
6 [ 16.978090][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0001
7 [ 18.140895][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0002
8 [ 19.135516][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0004
10 [ 19.900086][ 6] [ T164] hda 0006:00: no codecs initialized
11 [ 45.573398][ 2] [ C2] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [kworker/2:0:25]
Here, when bus->codec_mask is 0, use a direct break to avoid execute snd_hda_codec_new function.
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Link: https://lore.kernel.org/r/20240301011841.7247-1-soxiebing@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Fixes for v6.8
A few small fixes, some driver specific and one slightly larger one
from Richard which adds a new core helper and updates a small clutch of
drivers to deal with the fact that they were using a helper which
requires that the lock for the list of controls without holding that
lock. We also have some quirks for new AMD based Lenovo systems.
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
A couple of functions that use snd_card_ref() and *_unref() are also
cleaned up with a defined class, too.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-25-tiwai@suse.de
Define guard() usage for PCM stream locking and use it in appropriate
places.
The pair of snd_pcm_stream_lock() and snd_pcm_stream_unlock() can be
presented with guard(pcm_stream_lock) now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-23-tiwai@suse.de
