We were previously adding all the planes owned by the CRTC even when
the ddb partitioning didn't change for them. As a consequence, a lot
of functions were being called when we were just moving the cursor
around the screen, such as skylake_update_primary_plane().
This was causing flickering on the primary plane when moving the
cursor. I'm not 100% sure which operation caused the flickering, but
we were writing to a lot of registers, so it could be any of these
writes. With this patch, just moving the mouse won't add the primary
plane to the commit since it won't trigger a change in DDB
partitioning.
v2: Use skl_ddb_entry_equal() (Lyude).
v3: Change Reported-and-bisected-by: to Reported-by: for checkpatch
Fixes: 05a76d3d6a ("drm/i915/skl: Ensure pipes with changed wms get added to the state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888
Cc: Mike Lothian <mike@fireburn.co.uk>
Cc: stable@vger.kernel.org
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475177808-29955-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 7f60e200e2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
DPLL_SDVO_HIGH_SPEED must be set for SDVO/HDMI/DP, but nowhere is it
forbidden to set it for LVDS/CRT as well. So let's also set it on
CRT to make it possible to share the DPLL between HDMI and CRT.
What that bit apparently does is enable the x5 clock to the port,
which then pumps out the bits on both edges of the clock. The DAC
doesn't need that clock since it's not pumping out bits, but I don't
think it hurts to have the DPLL output that clock anyway.
This is fairly important on IVB since it has only two DPLLs with three
pipes. So trying to drive three or more PCH ports with three pipes
is only possible when at least one of the DPLLs gets shared between
two of the pipes.
SNB doesn't really need to do this since it has only two pipes. It could
be done to avoid enabling the second DPLL at all in certain cases, but
I'm not sure that's such a huge win. So let's not do it for SNB, at
least for now. On ILK it never makes sense as the DPLLs can't be shared.
v2: Just always enable the high speed clock to keep things simple (Daniel)
Beef up the commit message a bit (Daniel)
Cc: Nick Yamane <nick.diego@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Tested-by: Nick Yamane <nick.diego@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97204
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474878646-17711-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
(cherry picked from commit 7d7f8633a8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The confusing thing is that plane_blocks_per_line is listed as part of
the method 2 calculation but is also used for other things. We
calculated it in two different places and different ways: one inside
skl_wm_method2() and the other inside skl_compute_plane_wm(). The
skl_wm_method2() implementation is the one that matches the
specification.
With this patch we fix the skl_compute_plane_wm() calculation and just
pass it as a parameter to skl_wm_method2(). We also take care to not
modify the value of plane_bytes_per_line since we're going to rely on
it having a correct value in later patches.
This should affect the watermarks for Linear and Y-tiled.
From my analysis, it looks like the two plane_blocks_per_line
variables got out of sync on 0fda65680e, but we can't really say
that commit was a regression, it looks like just an incomplete fix.
There's always the possibility that 0fda65680e matched our
specification at that time, and then later the specification changed.
v2: Try to add a "Fixes" tag (Maarten).
Fixes: 0fda65680e ("drm/i915/skl: Update watermarks for Y tiling")
Cc: stable@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-7-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 7a1a8aed67)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We never remembered to set it (so it was zero), but this was not a
problem in the past due to the way handled the hardware registers.
Unfortunately we changed how we set the hardware and forgot to set
intel_crtc->dspaddr_offset.
This started to reflect on a few kms_frontbuffer_tracking subtests
that relied on page flips with CRTCs that don't point to the x:0,y:0
coordinates of the frontbuffer. After the page flip the CRTC was
showing the x:0,y:0 coordinate of the frontbuffer instead of
x:500,y:500. This problem is present even if we don't enable FBC or
PSR.
While trying to bisect it I realized that the first bad commit
actually just gives me a black screen for the mentioned tests instead
of showing the wrong x:0,y:0 offsets. A few commits later the black
screen problem goes away and we get to the point where the code is
today, but I'll consider the black screen as the first bad commit
since it's the point where the IGT subtests start to fail.
Fixes: 6687c9062c ("drm/i915: Rewrite fb rotation GTT handling")
Testcase: kms_frontbuffer_tracking/fbc-1p-primscrn-shrfb-pgflip-blt
Testcase: kms_frontbuffer_tracking/fbc-1p-primscrn-shrfb-evflip-blt
Testcase: kms_frontbuffer_tracking/fbc-1p-shrfb-fliptrack
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471644203-23463-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 4c0b8a8bc4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Just some misc bug fixes for 4.9.
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: revert "use more than 64KB fragment size if possible"
drm/amdgpu: warn if dp aux is still attached on free
drm/amdgpu/dce11: add missing drm_mode_config_cleanup call
drm/amdgpu: also track late init state
drm/amdgpu/virtual_dce: adjust config ifdef
drm/amdgpu/vce: add support for hw config packet (v2)
drm/amdgpu: clean up to set fw_offset as 0 twice
drm/amdgpu: remove DRM_AMD_POWERPLAY
drm/radeon: Prevent races on pre DCE4 between flip submission and completion.
drm/radeon: Slightly more robust flip completion handling for < DCE-4
Another attempt, this time rebased and without the pipe crc patches:
- display_info cleanups from Ville
- make prime/gem lookups faster with rbtrees (Chris)
- misc stuff all over
* tag 'topic/drm-misc-2016-10-05' of git://anongit.freedesktop.org/drm-intel:
drm/rockchip: analogix_dp: Refuse to enable PSR if panel doesn't support it
drm/bridge: analogix_dp: Add analogix_dp_psr_supported
drm/fb-helper: add DRM_FB_HELPER_DEFAULT_OPS for fb_ops
drm: Document caveats around atomic event handling
uapi: add missing install of sync_file.h
drm: Simplify drm_printk to reduce object size quite a bit
drm/i915: Account for sink max TMDS clock when checking the port clock
drm/i915: Replace a bunch of connector->base.display_info with a local variable
drm/edid: Move dvi_dual/max_tmds_clock parsing out from drm_edid_to_eld()
drm/edid: Clear the old cea_rev when there's no CEA extension in the new EDID
drm/edid: Reduce the number of times we parse the CEA extension block
drm/edid: Don't pass around drm_display_info needlessly
drm/edid: Move dvi_dual/max_tmds_clock to drm_display_info
drm/edid: Make max_tmds_clock kHz instead of MHz
drm/edid: Clear old dvi_dual/max_tmds_clock before parsing the new EDID
drm/edid: Clear old audio latency values before parsing the new EDID
drm: Convert prime dma-buf <-> handle to rbtree
drm/mediatek: mark symbols static where possible
drm/rockchip: mark symbols static where possible
drm/rockchip: add missing header dependencies
This pull request brings in several fixes for drm-next, mostly for
HDMI.
* tag 'drm-vc4-next-2016-10-06' of https://github.com/anholt/linux:
drm/vc4: Add support for double-clocked modes.
drm/vc4: Set up the AVI and SPD infoframes.
drm/vc4: Fix support for interlaced modes on HDMI.
drm/vc4: Increase timeout for HDMI_SCHEDULER_CONTROL changes.
drm/vc4: Fall back to using an EDID probe in the absence of a GPIO.
drm/vc4: Enable limited range RGB output on HDMI with CEA modes.
drm/vc4: Fix races when the CS reads from render targets.
drm/vc4: cleanup with list_first_entry_or_null()
Now that we have infoframes to report the pixel repeat flag, we can
start using it. Fixes locking the 720x480i and 720x576i modes on my
Dell 2408WFP. Like the 1920x1080i case, they don't fit properly on
the screen, though.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes a purple bar on the left side of the screen with my Dell
2408WFP. It will also be required for supporting the double-clocked
video modes.
Signed-off-by: Eric Anholt <eric@anholt.net>
We really do need to be using the halved V fields. I had been
confused by the code I was using as a reference because it stored
halved vsync fields but not halved vdisplay, so it looked like I only
needed to divide vdisplay by 2.
This reverts part of Mario's timestamping fixes that prevented
CRTC_HALVE_V from applying, and instead adjusts the timestamping code
to not use the crtc field in that case.
Fixes locking of 1920x1080x60i on my Dell 2408WFP. There are black
bars on the top and bottom, but I suspect that might be an
under/overscan flags problem as opposed to video timings.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes occasional debug spew at boot when connected directly through
HDMI, and probably confusing the HDMI state machine when we go trying
to poke registers for the enable sequence too soon.
Signed-off-by: Eric Anholt <eric@anholt.net>
On Pi0/1/2, we use an external GPIO line for hotplug detection, since
the HDMI_HOTPLUG register isn't connected to anything. However, with
the Pi3 the HPD GPIO line has moved off to a GPIO expander that will
be tricky to get to (the firmware is constantly polling the expander
using i2c0, so we'll need to coordinate with it).
As a stop-gap, if we don't have a GPIO line, use an EDID probe to
detect connection. Fixes HDMI display on the pi3.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes broken grayscale ramps on many HDMI monitors, where large areas
at the ends of the ramp would all appear as black or white.
Signed-off-by: Eric Anholt <eric@anholt.net>
With the introduction of bin/render pipelining, the previous job may
not be completed when we start binning the next one. If the previous
job wrote our VBO, IB, or CS textures, then the binning stage might
get stale or uninitialized results.
Fixes the major rendering failure in glmark2 -b terrain.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: ca26d28bba ("drm/vc4: improve throughput by pipelining binning and rendering jobs")
Cc: stable@vger.kernel.org
The combo of list_empty() check and return list_first_entry()
can be replaced with list_first_entry_or_null().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
If this happens (and it recently did), we free a structure while part of
it is still in use, which results in non-obvious crashes. The way it's
detached is not trivial (DRM core has to call the connector .destroy
callback and things must be torn down in the right order), so better
detect it and warn early.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All other amdgpu/dce_v* files have this call, it's only mysteriously
missing from dce_v11_0.c since the file was added and causes leaks.
Fixes: aaa36a976b ("drm/amdgpu: Add initial VI support")
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Successful sw_init() and hw_init() states are tracked, but not
late_init(). Various error paths may result in amdgpu_fini() being
called before .late init is done, so late_init needs to be tracked
to avoid unexpected or multiple .late_fini() calls.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pre DCE4 hw doesn't have reliable pageflip completion
interrupts, so instead polling for flip completion is
used from within the vblank irq handler to complete
page flips.
This causes a race if pageflip ioctl is called close to
vblank:
1. pageflip ioctl queues execution of radeon_flip_work_func.
2. vblank irq fires, radeon_crtc_handle_vblank checks for
flip_status == FLIP_SUBMITTED finds none, no-ops.
3. radeon_flip_work_func runs inside vblank, decides to
set flip_status == FLIP_SUBMITTED and programs the
flip into hw.
4. hw executes flip immediately (because in vblank), but
as 2 already happened, the flip completion routine only
emits the flip completion event one refresh later ->
wrong vblank count/timestamp for completion and no
performance gain, as instead of delaying the flip until
next vblank, we now delay the next flip by 1 refresh
while waiting for the delayed flip completion event.
Given we often don't gain anything due to this race, but
lose precision, prevent the programmed flip from executing
in vblank on pre DCE4 asics to avoid this race.
On pre-AVIVO hw we can't program the hw for edge-triggered
flips, they always execute anywhere in vblank. Therefore delay
the actual flip programming until after vblank on pre-AVIVO.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pre DCE4 hardware doesn't have (reliable) pageflip completion
irqs, therefore we have to use the old polling method for flip
completion handling in vblank irq.
As vblank irqs fire a bit before start of vblank (when the
linebuffer fifo read position reaches end of scanout), we
have some fudge for flip completion handling in the last
lines of active scanout. Old code assumed the threshold to
be 99% of active scanout height, a ballpark estimate which
worked ok. Since we know since a while how to calculate the
actual threshold from linebuffer size, lets make use of it
to get a more accurate threshold.
This completion path is still prone to some races in corner
cases, especially on pre-AVIVO hardware, so document them
a bit better in the code comments.
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove function name and special " *ERROR*" from argument list
$ size drivers/gpu/drm/built-in.o* (x86-32 defconfig, most drm selected)
text data bss dec hex filename
5635366 182579 14328 5832273 58fe51 drivers/gpu/drm/built-in.o.new
5779552 182579 14328 5976459 5b318b drivers/gpu/drm/built-in.o.old
Using "%ps", __builtin_return_address(0) is the same as "%s", __func__
except for static inlines, but it's more or less the same output.
Miscellanea:
o Convert args... to ##__VA_ARGS__
o The equivalent DRM_DEV_<FOO> macros are rarely used and not
worth conversion
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/01f976d5ab93c985756fc1b2e83656fb0a2a28c8.1474856262.git.joe@perches.com
