mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-02 12:10:23 -04:00
be3c213150dc4370ef211a78d78457ff166eba4e
1194376 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
be3c213150 |
Merge tag 'ovl-update-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs update from Amir Goldstein: - fix two NULL pointer deref bugs (Zhihao Cheng) - add support for "data-only" lower layers destined to be used by composefs - port overlayfs to the new mount api (Christian Brauner) * tag 'ovl-update-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: (26 commits) ovl: add Amir as co-maintainer ovl: reserve ability to reconfigure mount options with new mount api ovl: modify layer parameter parsing ovl: port to new mount api ovl: factor out ovl_parse_options() helper ovl: store enum redirect_mode in config instead of a string ovl: pass ovl_fs to xino helpers ovl: clarify ovl_get_root() semantics ovl: negate the ofs->share_whiteout boolean ovl: check type and offset of struct vfsmount in ovl_entry ovl: implement lazy lookup of lowerdata in data-only layers ovl: prepare for lazy lookup of lowerdata inode ovl: prepare to store lowerdata redirect for lazy lowerdata lookup ovl: implement lookup in data-only layers ovl: introduce data-only lower layers ovl: remove unneeded goto instructions ovl: deduplicate lowerdata and lowerstack[] ovl: deduplicate lowerpath and lowerstack[] ovl: move ovl_entry into ovl_inode ovl: factor out ovl_free_entry() and ovl_stack_*() helpers ... |
||
|
Linus Torvalds
|
eee9c708cc |
gup: avoid stack expansion warning for known-good case
In commit
|
||
|
Linus Torvalds
|
1b722407a1 |
Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
|
||
|
Linus Torvalds
|
f8824e151f |
Merge tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google
Chameleon, Ingenic X1000, Intel systems with various CODECs,
Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton
NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive
JH7110, Texas Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1
driver"
* tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits)
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook
ASoC: hdmi-codec: fix channel info for compressed formats
ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats
ASoC: core: Always store of_node when getting DAI link component
ASoC: tas2781: Fix error code in tas2781_load_calibration()
ASoC: amd: update pm_runtime enable sequence
ALSA: ump: Export MIDI1 / UMP conversion helpers
ASoC: tas2781: fix Kconfig dependencies
ASoC: amd: acp: remove acp poweroff function
ASoC: amd: acp: clear pdm dma interrupt mask
ASoC: codecs: max98090: Allow dsp_a mode
ASoC: qcom: common: add default jack dapm pins
ASoC: loongson: fix address space confusion
ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints
ASoC: tegra: Remove stale comments in AHUB
ASoC: tegra: Use normal system sleep for ASRC
ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio
ASoC: fsl-asoc-card: Allow passing the number of slots in use
ASoC: codecs: wsa884x: Add WSA884x family of speakers
ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
...
|
||
|
Linus Torvalds
|
86e203edf2 |
Merge tag 'input-for-v6.5-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - improvements to PS/2 handling for case when EC has already latched a scancode in the data register, but the kernel expects to receive an ACK to a command it sent to a device (such as keyboard LED toggle) - input drivers for devices connected over I2C bus have been switched back to using [new] .probe() - uinput allows userspace to inject timestamps for input events - support for capacitive keys in Atmel touch controller driver - assorted fixes to drv260x, pwm-vibra, ili210x, adxl34x, and other drivers * tag 'input-for-v6.5-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: pm8941-powerkey - fix debounce on gen2+ PMICs MAINTAINERS: Adjust Qualcomm driver globbing Input: gameport - provide default trigger() and read() Input: tps65219-pwrbutton - use regmap_set_bits() Input: tps65219-pwrbutton - convert to .remove_new() Input: tests - add test to cover all input_grab_device() function Input: gpio-keys - use input_report_key() Input: xpad - spelling fixes for "Xbox" Input: add HAS_IOPORT dependencies Input: libps2 - do not discard non-ack bytes when controlling LEDs Input: libps2 - introduce common interrupt handler Input: libps2 - fix aborting PS/2 commands Input: libps2 - fix NAK handling Input: libps2 - rework handling of command response Input: libps2 - remove special handling of ACK for command byte Input: libps2 - attach ps2dev instances as serio port's drvdata Input: Switch i2c drivers back to use .probe() dt-bindings: input: cypress,cyapa: convert to dtschema Input: adxl34x - do not hardcode interrupt trigger type Input: pwm-vibra - add support for enable GPIO ... |
||
|
Linus Torvalds
|
0e382fa72b |
Merge tag 'for-linus-2023062701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina: - more bullet-proof handling of devres-managed resources in HID core (Dmitry Torokhov) - conversion of hid-wacom to use ktime_t (Jason Gerecke) - touch selftests for hid-wacom (Joshua Dickens) - support for nVidia Thunderstrike (SHIELD 2017) controller (Rahul Rameshbabu) - power management reset-during-suspend fix for goodix Chromebook devices (Fei Shao) - assorted device ID additions, device-specific quirks and code cleanups * tag 'for-linus-2023062701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits) HID: wacom: Use ktime_t rather than int when dealing with timestamps HID: hidraw: fix data race on device refcount HID: intel-ish-hid: ipc: Add Arrow Lake PCI device ID HID: logitech-hidpp: add HIDPP_QUIRK_DELAYED_INIT for the T651. HID: add quirk for 03f0:464a HP Elite Presenter Mouse HID: nvidia-shield: Support LED functionality for Thunderstrike HID: nvidia-shield: Add mappings for consumer HID USAGE buttons HID: nvidia-shield: Initial driver implementation with Thunderstrike support HID: apple: Option to swap only left side mod keys HID: uclogic: Modular KUnit tests should not depend on KUNIT=y HID: fix an error code in hid_check_device_match() HID: logitech-hidpp: Add USB and Bluetooth IDs for the Logitech G915 TKL Keyboard HID: i2c-hid: Switch i2c drivers back to use .probe() HID: i2c-hid: goodix: Add support for "goodix,no-reset-during-suspend" property dt-bindings: input: goodix: Add "goodix,no-reset-during-suspend" property HID: microsoft: Add rumble support to latest xbox controllers selftests: hid: Add touch tests for Wacom devices HID: ensure timely release of driver-allocated resources HID: split apart hid_device_probe to make logic more apparent HID: amd_sfh: Split sensor and HID initialization for SFH1.1 ... |
||
|
Linus Torvalds
|
675285ad81 |
Merge tag 'fbdev-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller: "Some fbdev fixes & cleanups. Includes is a fix for a potential out-of-bound memory access in fast_imageblit() and the switch of the VIA fbdev driver to use GPIO descriptors. Summary: - fix potential OOB read in fast_imageblit() - fbdev/media: Use GPIO descriptors for VIA GPIO - broadsheetfb & metronomefb: Add MODULE_FIRMWARE macro - omapfb: error handling fix in mipid_spi_probe() - sh_mobile_lcdcfb, sh7760fb: Typo and warning fixes - hitfb: code cleanups" * tag 'fbdev-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: fix potential OOB read in fast_imageblit() MAINTAINERS: adjust entry in VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER fbdev: sh7760fb: Fix -Wimplicit-fallthrough warnings fbdev: sh_mobile_lcdcfb: Fix ARGB32 overlay format typo fbdev: hitfb: Use NULL for pointers fbdev: hitfb: Fix integer-to-pointer cast fbdev/media: Use GPIO descriptors for VIA GPIO video/hdmi: Reorder fields in 'struct hdmi_avi_infoframe' fbdev: broadsheetfb: Add MODULE_FIRMWARE macro fbdev: metronomefb: Add MODULE_FIRMWARE macro fbdev: hitfb: Declare hitfb_blank() as static fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe() |
||
|
Linus Torvalds
|
e5476f57b3 |
Merge tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, some improvements to the core code, lots of
different updates to existing GPIO drivers and some dt-bindings on
top.
There's nothing controversial in here and almost everything has been
in next for more than a week (95% a lot longer than this). The only
thing that has spent less time in next is a new driver so no risk of
regressions.
The single merge pulls in changes that remove all usage of global GPIO
numbers from arch/arm/mach-omap.
Core GPIO library:
- remove unused symbols
- don't spam the kernel log with messages about hogs
- remove old sysfs API cruft
- improve handling of GPIO masks
New drivers:
- add a driver for the BlueField-3 GPIO controller
- add GPIO support for the TPS65219 PMIC
Driver improvements:
- extend the gpio-aggregator driver to support ramp-up/ramp-down
delay
- remove unnecessary CONFIG_OF guards from gpio-aggregator
- readability improvements in gpio-tangier
- switch i2c drivers back to using probe() now that it's been
converted in the i2c subsystem to not taking the id parameter
- remove unused inclusions of of_gpio.h in several drivers
- make pm ops static in gpio-davinci and fix a comment
- use more devres in drivers to shrink and simplify the code
- add missing include in gpio-sa1100
- add HAS_IOPORT KConfig dependency where needed
- add permissions checks before accessing pins in gpio-tegra186
- convert the gpio-zynq driver to using immutable irqchips
- preserve output settings set by the bootloader in gpio-mpc8xxx
Selftests:
- tweak the variable naming in script tests
Device tree updates:
- convert gpio-mmio and gpio-stmpe to YAML
- add parsing of GPIO hogs to gpio-vf610
- add bindings for the Cirrus EP93xx GPIO controller
- add gpio-line-names property to the gpio-pca9570 bindings
- extend the binding for x-powers,axp209 with another block"
* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
of: unittest: drop assertions for GPIO hog messages
gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
dt-bindings: gpio: gpio-vf610: Add parsing of hogs
gpio: lpc18xx: Remove unused of_gpio.h inclusion
gpio: xra1403: Remove unused of_gpio.h inclusion
gpio: mpc8xxx: Remove unused of_gpio.h inclusion
dt-bindings: gpio: Add Cirrus EP93xx
gpio: mpc8xxx: latch GPIOs state on module load when configured as output
selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
gpio: mlxbf3: Add gpio driver support
gpio: delay: Remove duplicative functionality
gpio: aggregator: Set up a parser of delay line parameters
gpio: aggregator: Support delay for setting up individual GPIOs
gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
dt-bindings: gpio: pca9570: add gpio-line-names property
gpiolib: remove unused gpio_cansleep()
gpio: tps65219: add GPIO support for TPS65219 PMIC
gpio: zynq: fix zynqmp_gpio not an immutable chip warning
gpio: davinci: make davinci_gpio_dev_pm_ops static
...
|
||
|
Linus Torvalds
|
ff7ddcf0db |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This batch of clk driver updates contains almost no new SoC support.
Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes.
Beyond that core framework change we have the usual pile of clk driver
updates such as migrating i2c drivers to use .probe() again or
YAMLfication of clk DT bindings so we can validate DTBs.
Overall the SoCs that got the most updates this time around in terms
of diffstat are the Amlogic and Mediatek drivers because they added
new SoC support or fixed up various drivers to have proper data.
In general things look kinda quiet. I suspect the core framework
change may still shake out some problems after the merge window,
mostly because not everyone tests linux-next where that series has
been for some number of weeks. I saw that there's at least one pending
fix for Tegra that needs to be wrapped up into a proper patch. I'll
try to catch those bits before the window closes so that -rc1 is
bootable. More details below.
Core:
- Make clk_ops::determine_rate mandatory for muxes
New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support
Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip
FPGA clock drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc"
boolean DT property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use
after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050,
i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve
some objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits)
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
...
|
||
|
Linus Torvalds
|
acd1d46b0d |
Merge tag 'hwmon-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for MAX31827
- Driver to support HP WMI Sensors
Added support to existing drivers:
- aht10: Support for AHT20
- aquacomputer_d5next: Support for Aquacomputer Leakshield
- asus-ec-sensors: Support for ROG Crosshair X670E Hero
- corsair-psu: Cleanups and support for series 2022 and 2023
- it87: Various improvements and support for IT8732F
- nct6683: Support customer ID of some MSI boards.
- nct6755: Support for NCT6799D
- oxp-sensors: Various cleanups; support for AYANEO 2, Geek, OXP
Mini, and AOKZOE A1 PRO
- pmbus/max16601: Support for new revisions of MAX16508
- pmbus/adm1275: Disable ADC while updating PMON_CONFIG, and fix
problems with temperature monitoring on ADM1272
- sht3x: Various cleanups; support for medium repeatability
Other notable changes:
- Switched regmap drivers to Maple tree support where appropriate
Various other minor fixes and improvements"
* tag 'hwmon-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
hwmon: max31827: Switch back to use struct i2c_driver::probe
hwmon: (oxp-sensors) Add support for AOKZOE A1 PRO
hwmon: (corsair-psu) update Series 2022 and 2023 support
hwmon: (corsair-psu) various cleanups
hwmon: (corsair-psu) add support for reading PWM values and mode
hwmon: (pmbus/adm1275) Disable ADC while updating PMON_CONFIG
hwmon: (pmbus/adm1275) Prepare for protected write to PMON_CONFIG
hwmon: (oxp-sensors) Simplify logic of error return
hwmon: (oxp-sensors) Remove unused header
hwmon: (nct6755) Add support for NCT6799D
hwmon: (oxp-sensors) Add tt_toggle attribute on supported boards
hwmon: (sht3x) complement sysfs interface for sts3x
hwmon: (sht3x) Add new non-stardard sysfs attribute
hwmon: (sht3x) add medium repeatability support
hwmon: (sht3x)replace "high-precision" property to "repeatability"
hwmon: (sht3x) remove blocking_io property
hwmon: (sht3x) remove sht3x_platform_data
hwmon: (pmbus/max16601) Add support for new revisions of MAX16508
Documentation/hwmon: Fix description of devm_hwmon_device_unregister()
hwmon: (tmp464) Use maple tree register cache
...
|
||
|
Hugh Dickins
|
e8c716bc68 |
mm/khugepaged: fix regression in collapse_file()
There is no xas_pause(&xas) in collapse_file()'s main loop, at the points
where it does xas_unlock_irq(&xas) and then continues.
That would explain why, once two weeks ago and twice yesterday, I have
hit the VM_BUG_ON_PAGE(page != xas_load(&xas), page) since "mm/khugepaged:
fix iteration in collapse_file" removed the xas_set(&xas, index) just
before it: xas.xa_node could be left pointing to a stale node, if there
was concurrent activity on the file which transformed its xarray.
I tried inserting xas_pause()s, but then even bootup crashed on that
VM_BUG_ON_PAGE(): there appears to be a subtle "nextness" implicit in
xas_pause().
xas_next() and xas_pause() are good for use in simple loops, but not in
this one: xas_set() worked well until now, so use xas_set(&xas, index)
explicitly at the head of the loop; and change that VM_BUG_ON_PAGE() not
to need its own xas_set(), and not to interfere with the xa_state (which
would probably stop the crashes from xas_pause(), but I trust that less).
The user-visible effects of this bug (if VM_BUG_ONs are configured out)
would be data loss and data leak - potentially - though in practice I
expect it is more likely that a subsequent check (e.g. on mapping or on
nr_none) would notice an inconsistency, and just abandon the collapse.
Link: https://lore.kernel.org/linux-mm/f18e4b64-3f88-a8ab-56cc-d1f5f9c58d4@google.com/
Fixes:
|
||
|
Linus Torvalds
|
9471f1f2f5 |
Merge branch 'expand-stack'
This modifies our user mode stack expansion code to always take the
mmap_lock for writing before modifying the VM layout.
It's actually something we always technically should have done, but
because we didn't strictly need it, we were being lazy ("opportunistic"
sounds so much better, doesn't it?) about things, and had this hack in
place where we would extend the stack vma in-place without doing the
proper locking.
And it worked fine. We just needed to change vm_start (or, in the case
of grow-up stacks, vm_end) and together with some special ad-hoc locking
using the anon_vma lock and the mm->page_table_lock, it all was fairly
straightforward.
That is, it was all fine until Ruihan Li pointed out that now that the
vma layout uses the maple tree code, we *really* don't just change
vm_start and vm_end any more, and the locking really is broken. Oops.
It's not actually all _that_ horrible to fix this once and for all, and
do proper locking, but it's a bit painful. We have basically three
different cases of stack expansion, and they all work just a bit
differently:
- the common and obvious case is the page fault handling. It's actually
fairly simple and straightforward, except for the fact that we have
something like 24 different versions of it, and you end up in a maze
of twisty little passages, all alike.
- the simplest case is the execve() code that creates a new stack.
There are no real locking concerns because it's all in a private new
VM that hasn't been exposed to anybody, but lockdep still can end up
unhappy if you get it wrong.
- and finally, we have GUP and page pinning, which shouldn't really be
expanding the stack in the first place, but in addition to execve()
we also use it for ptrace(). And debuggers do want to possibly access
memory under the stack pointer and thus need to be able to expand the
stack as a special case.
None of these cases are exactly complicated, but the page fault case in
particular is just repeated slightly differently many many times. And
ia64 in particular has a fairly complicated situation where you can have
both a regular grow-down stack _and_ a special grow-up stack for the
register backing store.
So to make this slightly more manageable, the bulk of this series is to
first create a helper function for the most common page fault case, and
convert all the straightforward architectures to it.
Thus the new 'lock_mm_and_find_vma()' helper function, which ends up
being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more
than half the architectures, we now have more shared code and avoid some
of those twisty little passages.
And largely due to this common helper function, the full diffstat of
this series ends up deleting more lines than it adds.
That still leaves eight architectures (ia64, m68k, microblaze, openrisc,
parisc, s390, sparc64 and um) that end up doing 'expand_stack()'
manually because they are doing something slightly different from the
normal pattern. Along with the couple of special cases in execve() and
GUP.
So there's a couple of patches that first create 'locked' helper
versions of the stack expansion functions, so that there's a obvious
path forward in the conversion. The execve() case is then actually
pretty simple, and is a nice cleanup from our old "grow-up stackls are
special, because at execve time even they grow down".
The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because
it's just more straightforward to write out the stack expansion there
manually, instead od having get_user_pages_remote() do it for us in some
situations but not others and have to worry about locking rules for GUP.
And the final step is then to just convert the remaining odd cases to a
new world order where 'expand_stack()' is called with the mmap_lock held
for reading, but where it might drop it and upgrade it to a write, only
to return with it held for reading (in the success case) or with it
completely dropped (in the failure case).
In the process, we remove all the stack expansion from GUP (where
dropping the lock wouldn't be ok without special rules anyway), and add
it in manually to __access_remote_vm() for ptrace().
Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases.
Everything else here felt pretty straightforward, but the ia64 rules for
stack expansion are really quite odd and very different from everything
else. Also thanks to Vegard Nossum who caught me getting one of those
odd conditions entirely the wrong way around.
Anyway, I think I want to actually move all the stack expansion code to
a whole new file of its own, rather than have it split up between
mm/mmap.c and mm/memory.c, but since this will have to be backported to
the initial maple tree vma introduction anyway, I tried to keep the
patches _fairly_ minimal.
Also, while I don't think it's valid to expand the stack from GUP, the
final patch in here is a "warn if some crazy GUP user wants to try to
expand the stack" patch. That one will be reverted before the final
release, but it's left to catch any odd cases during the merge window
and release candidates.
Reported-by: Ruihan Li <lrh2000@pku.edu.cn>
* branch 'expand-stack':
gup: add warning if some caller would seem to want stack expansion
mm: always expand the stack with the mmap write lock held
execve: expand new process stack manually ahead of time
mm: make find_extend_vma() fail if write lock not held
powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
arm/mm: Convert to using lock_mm_and_find_vma()
riscv/mm: Convert to using lock_mm_and_find_vma()
mips/mm: Convert to using lock_mm_and_find_vma()
powerpc/mm: Convert to using lock_mm_and_find_vma()
arm64/mm: Convert to using lock_mm_and_find_vma()
mm: make the page fault mmap locking killable
mm: introduce new 'lock_mm_and_find_vma()' page fault helper
|
||
|
Linus Torvalds
|
3a8a670eee |
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
||
|
Linus Torvalds
|
6a8cbd9253 |
Merge tag 'v6.5-rc1-sysctl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain: "The changes for sysctl are in line with prior efforts to stop usage of deprecated routines which incur recursion and also make it hard to remove the empty array element in each sysctl array declaration. The most difficult user to modify was parport which required a bit of re-thinking of how to declare shared sysctls there, Joel Granados has stepped up to the plate to do most of this work and eventual removal of register_sysctl_table(). That work ended up saving us about 1465 bytes according to bloat-o-meter. Since we gained a few bloat-o-meter karma points I moved two rather small sysctl arrays from kernel/sysctl.c leaving us only two more sysctl arrays to move left. Most changes have been tested on linux-next for about a month. The last straggler patches are a minor parport fix, changes to the sysctl kernel selftest so to verify correctness and prevent regressions for the future change he made to provide an alternative solution for the special sysctl mount point target which was using the now deprecated sysctl child element. This is all prep work to now finally be able to remove the empty array element in all sysctl declarations / registrations which is expected to save us a bit of bytes all over the kernel. That work will be tested early after v6.5-rc1 is out" * tag 'v6.5-rc1-sysctl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sysctl: replace child with an enumeration sysctl: Remove debugging dump_stack test_sysclt: Test for registering a mount point test_sysctl: Add an option to prevent test skip test_sysctl: Add an unregister sysctl test test_sysctl: Group node sysctl test under one func test_sysctl: Fix test metadata getters parport: plug a sysctl register leak sysctl: move security keys sysctl registration to its own file sysctl: move umh sysctl registration to its own file signal: move show_unhandled_signals sysctl to its own file sysctl: remove empty dev table sysctl: Remove register_sysctl_table sysctl: Refactor base paths registrations sysctl: stop exporting register_sysctl_table parport: Removed sysctl related defines parport: Remove register_sysctl_table from parport_default_proc_register parport: Remove register_sysctl_table from parport_device_proc_register parport: Remove register_sysctl_table from parport_proc_register parport: Move magic number "15" to a define |
||
|
Linus Torvalds
|
4e3c09e954 |
Merge tag 'v6.5-rc1-modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain: "The changes queued up for modules are pretty tame, mostly code removal of moving of code. Only two minor functional changes are made, the only one which stands out is Sebastian Andrzej Siewior's simplification of module reference counting by removing preempt_disable() and that has been tested on linux-next for well over a month without no regressions. I'm now, I guess, also a kitchen sink for some kallsyms changes" [ There was a mis-communication about the concurrent module load changes that I had expected to come through Luis despite me authoring the patch. So some of the module updates were left hanging in the email ether, and I just committed them separately. It's my bad - I should have made it more clear that I expected my own patches to come through the module tree too. Now they missed linux-next, but hopefully that won't cause any issues - Linus ] * tag 'v6.5-rc1-modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: kallsyms: make kallsyms_show_value() as generic function kallsyms: move kallsyms_show_value() out of kallsyms.c kallsyms: remove unsed API lookup_symbol_attrs kallsyms: remove unused arch_get_kallsym() helper module: Remove preempt_disable() from module reference counting. |
||
|
Linus Torvalds
|
9b9879fc03 |
modules: catch concurrent module loads, treat them as idempotent
This is the new-and-improved attempt at avoiding huge memory load spikes
when the user space boot sequence tries to load hundreds (or even
thousands) of redundant duplicate modules in parallel.
See commit
|
||
|
Linus Torvalds
|
054a73009c |
module: split up 'finit_module()' into init_module_from_file() helper
This will simplify the next step, where we can then key off the inode to do one idempotent module load. Let's do the obvious re-organization in one step, and then the new code in another. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
89181f544f |
Merge tag 'mmc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Allow synchronous detection of (e)MMC/SD/SDIO cards
- Fixup error check for ioctls for SPI hosts
- Disable broken SD-Cache support for Kingston Canvas Go Plus from 2019
- Disable broken eMMC-Trim support for Kingston EMMC04G-M627
- Disable broken eMMC-Trim support for Micron MTFC4GACAJCN-1M
MMC host:
- bcm2835: Convert DT bindings to YAML
- mmci:
- Enable asynchronous probe
- Transform the ux500 HW-busy detection into a proper state machine
- Add support for SW busy-end timeouts for the ux500 variants
- mmci_stm32:
- Add support for sdm32 variant revision v3.0 used on STM32MP25
- Improve the tuning sequence
- mtk-sd: Tune polling-period to improve performance
- sdhci: Fixup DMA configuration for 64-bit DMA mode
- sdhci-bcm-kona: Convert DT bindings to YAML
- sdhci-msm:
- Switch to use the new ICE API
- Add support for the SC8280XP/IPQ6018/QDU1000/QRU1000 variants
- sdhci-pci-gli:
- Add support SD Express cards for GL9767
- Add support for the Genesys Logic GL9767 variant"
* tag 'mmc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (42 commits)
dt-bindings: mmc: fsl-imx-esdhc: Add imx6ul support
mmc: mmci: Add support for SW busy-end timeouts
mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019
mmc: core: disable TRIM on Kingston EMMC04G-M627
mmc: mmci: stm32: add delay block support for STM32MP25
mmc: mmci: stm32: prepare other delay block support
mmc: mmci: stm32: manage block gap hardware flow control
mmc: mmci: Add support for sdmmc variant revision v3.0
mmc: mmci: add stm32_idmabsize_align parameter
dt-bindings: mmc: mmci: Add st,stm32mp25-sdmmc2 compatible
mmc: core: disable TRIM on Micron MTFC4GACAJCN-1M
mmc: mmci: Break out a helper function
mmc: mmci: Use a switch statement machine
mmc: mmci: Use state machine state as exit condition
mmc: mmci: Retry the busy start condition
mmc: mmci: Make busy complete state machine explicit
mmc: mmci: Break out error check in busy detect
mmc: mmci: Stash status while waiting for busy
mmc: mmci: Unwind big if() clause
mmc: mmci: Clear busy_status when starting command
...
|
||
|
Linus Torvalds
|
1364b4068a |
Merge tag 'mtd/for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from
"Core MTD changes:
- otp:
- Put factory OTP/NVRAM into the entropy pool
- Clean up on error in mtd_otp_nvmem_add()
MTD devices changes:
- sm_ftl: Fix typos in comments
- Use SPDX license headers
- pismo: Switch back to use i2c_driver's .probe()
- mtdpart: Drop useless LIST_HEAD
- st_spi_fsm: Use the devm_clk_get_enabled() helper function
DT binding changes:
- partitions:
- Include TP-Link SafeLoader in allowed list
- Add missing type for "linux,rootfs"
- Extend the nand node names filter
- Create a file for raw NAND chip properties
- Mark nand-ecc-placement deprecated
- Describe nand-ecc-mode
- Prevent NAND chip unevaluated properties in all NAND bindings with
a NAND chip reference.
- Qcom: Fix a property position
- Marvell: Convert to YAML DT schema
Raw NAND chip drivers changes:
- Macronix: OTP access for MX30LFxG18AC
- Add basic Sandisk manufacturer ops
- Add support for Sandisk SDTNQGAMA
Raw NAND controller driver changes:
- Meson:
- Replace integer consts with proper defines
- Allow waiting w/o wired ready/busy pin
- Check buffer length validity
- Fix unaligned DMA buffers handling
- dt-bindings: Fix 'nand-rb' property
- Arasan: Revert "mtd: rawnand: arasan: Prevent an unsupported
configuration" as this limitation is no longer true thanks to the
recent efforts in improving the clocks support in this driver
SPI-NAND changes:
- Gigadevice: add support for GD5F2GQ5xExxH
- Macronix: Add support for serial NAND flashes"
* tag 'mtd/for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (38 commits)
dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme
dt-bindings: mtd: ti,am654: Prevent unevaluated properties
dt-bindings: mtd: mediatek: Prevent NAND chip unevaluated properties
dt-bindings: mtd: mediatek: Reference raw-nand-chip.yaml
dt-bindings: mtd: stm32: Prevent NAND chip unevaluated properties
dt-bindings: mtd: rockchip: Prevent NAND chip unevaluated properties
dt-bindings: mtd: intel: Prevent NAND chip unevaluated properties
dt-bindings: mtd: denali: Prevent NAND chip unevaluated properties
dt-bindings: mtd: brcmnand: Prevent NAND chip unevaluated properties
dt-bindings: mtd: meson: Prevent NAND chip unevaluated properties
dt-bindings: mtd: sunxi: Prevent NAND chip unevaluated properties
dt-bindings: mtd: ingenic: Prevent NAND chip unevaluated properties
dt-bindings: mtd: qcom: Prevent NAND chip unevaluated properties
dt-bindings: mtd: qcom: Fix a property position
dt-bindings: mtd: Describe nand-ecc-mode
dt-bindings: mtd: Mark nand-ecc-placement deprecated
dt-bindings: mtd: Create a file for raw NAND chip properties
dt-bindings: mtd: Accept nand related node names
mtd: sm_ftl: Fix typos in comments
mtd: otp: clean up on error in mtd_otp_nvmem_add()
...
|
||
|
Linus Torvalds
|
84fccbba93 |
Merge tag 'spi-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"One small core feature this time around but mostly driver improvements
and additions for SPI:
- Add support for controlling the idle state of MOSI, some systems
can support this and depending on the system integration may need
it to avoid glitching in some situations
- Support for polling mode in the S3C64xx driver and DMA on the
Qualcomm QSPI driver
- Support for several Allwinner SoCs, AMD Pensando Elba, Intel Mount
Evans, Renesas RZ/V2M, and ST STM32H7"
* tag 'spi-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
spi: dt-bindings: atmel,at91rm9200-spi: fix broken sam9x7 compatible
spi: dt-bindings: atmel,at91rm9200-spi: add sam9x7 compatible
spi: Add support for Renesas CSI
spi: dt-bindings: Add bindings for RZ/V2M CSI
spi: sun6i: Use the new helper to derive the xfer timeout value
spi: atmel: Prevent false timeouts on long transfers
spi: dt-bindings: stm32: do not disable spi-slave property for stm32f4-f7
spi: Create a helper to derive adaptive timeouts
spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()
spi: stm32: disable spi-slave property for stm32f4-f7
spi: stm32: introduction of stm32h7 SPI device mode support
spi: stm32: use dmaengine_terminate_{a}sync instead of _all
spi: stm32: renaming of spi_master into spi_controller
spi: dw: Remove misleading comment for Mount Evans SoC
spi: dt-bindings: snps,dw-apb-ssi: Add compatible for Intel Mount Evans SoC
spi: dw: Add compatible for Intel Mount Evans SoC
spi: s3c64xx: Use dev_err_probe()
spi: s3c64xx: Use the managed spi master allocation function
spi: spl022: Probe defer is no error
spi: spi-imx: fix mixing of native and gpio chipselects for imx51/imx53/imx6 variants
...
|
||
|
Linus Torvalds
|
362067b6d5 |
Merge tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree,
I don't know what it is about those two trees (this for
spi-geni-qcom).
Summary:
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"
* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
regulator: Add Renesas PMIC RAA215300 driver
regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
regulator: ltc3676: Use maple tree register cache
regulator: ltc3589: Use maple tree register cache
regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
regulator: mt6358: Use linear voltage helpers for single range regulators
regulator: mt6358: Const-ify mt6358_regulator_info data structures
regulator: mt6358: Drop *_SSHUB regulators
regulator: mt6358: Merge VCN33_* regulators
regulator: dt-bindings: mt6358: Drop *_sshub regulators
regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
regulator: Switch two more i2c drivers back to use .probe()
spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
regulator: axp20x: Add AXP15060 support
regulator: axp20x: Add support for AXP313a variant
dt-bindings: pfuze100.yaml: Add an entry for interrupts
regulator: stm32-pwr: Fix regulator disabling
...
|
||
|
Linus Torvalds
|
4171a9aa23 |
Merge tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another busy release for regmap with the second half of the maple tree
register cache implementation, there's some smaller optimisations that
could be done but this should now be able to replace the rbtree cache
for most devices.
We also had a followup from Aidan MacDonald's refactoring of some of
the regmap-irq interfaces, the conversion is complete so the old
interfaces are removed. This means that even with the new features for
the maple tree cache we'd have a nice negative diffstat were it not
for the addition of a bunch more KUnit coverage.
There's one GPIO patch in here, it was a dependency for a cleanup of
an API in the regmap-irq code for which the gpio-104-dio-48e driver
was the only user.
Highlights:
- The maple tree cache can now load in default values more
efficiently, and is capabale of syncing multiple registers
in a single write during cache sync
- More KUnit coverage, including some coverage for raw I/O
and a dummy RAM backed cache to support it
- Removal of several old interfaces in regmap-irq now all
users have been modernised"
* tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits)
regmap: Allow reads from write only registers with the flat cache
regmap: Drop early readability check
regmap: Check for register readability before checking cache during read
regmap: Add test to make sure we don't sync to read only registers
regmap: Add a test case for write only registers
regmap: Add test that writes to write only registers are prevented
regmap: Add debugfs file for forcing field writes
regmap: Don't check for changes in regcache_set_val()
regmap: maple: Implement block sync for the maple tree cache
regmap: Provide basic KUnit coverage for the raw register I/O
regmap: Provide a ram backed regmap with raw support
regmap: Add missing cache_only checks
regmap: regmap-irq: Move handle_post_irq to before pm_runtime_put
regmap: Load register defaults in blocks rather than register by register
regmap: mmio: Allow passing an empty config->reg_stride
regmap-irq: Drop backward compatibility for inverted mask/unmask
regmap-irq: Minor adjustments to .handle_mask_sync()
regmap-irq: Remove support for not_fixed_stride
regmap-irq: Remove type registers
regmap-irq: Remove virtual registers
...
|
||
|
Dave Airlie
|
5ff2977b19 |
Merge tag 'drm-intel-next-fixes-2023-06-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
One fix for incorrect error handling in the frame buffer mmap callback, HuC init error handling fix, missing wakeref during GSC init and a build fix when !CONFIG_PROC_FS. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZJLI8ON96ApPTl8H@tursulin-desk |
||
|
Linus Torvalds
|
1b2c92a1cb |
x86/mem_encrypt: Remove stale mem_encrypt_init() declaration
The memory encryption initialization logic was moved from init/main.c into arch_cpu_finalize_init() in commit |
||
|
Linus Torvalds
|
6581ccf03e |
mm: fix __access_remote_vm() GUP failure case
Commit |
||
|
Linus Torvalds
|
77b1a7f7a0 |
Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton: - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level directories - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs - Zhen Lei has enhanced kexec's ability to support two crash regions - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries - And the usual bunch of singleton patches in various places * tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) kernel/time/posix-stubs.c: remove duplicated include ocfs2: remove redundant assignment to variable bit_off watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h devres: show which resource was invalid in __devm_ioremap_resource() watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64 watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h watchdog/hardlockup: make the config checks more straightforward watchdog/hardlockup: sort hardlockup detector related config values a logical way watchdog/hardlockup: move SMP barriers from common code to buddy code watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY watchdog/buddy: don't copy the cpumask in watchdog_next_cpu() watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog() watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy() watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick() watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe() watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails ... |
||
|
Linus Torvalds
|
6e17c6de3d |
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton: - Yosry Ahmed brought back some cgroup v1 stats in OOM logs - Yosry has also eliminated cgroup's atomic rstat flushing - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree - Johannes Weiner has done some cleanup work on the compaction code - David Hildenbrand has contributed additional selftests for get_user_pages() - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code - Huang Ying has done some maintenance on the swap code's usage of device refcounting - Christoph Hellwig has some cleanups for the filemap/directio code - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings - John Hubbard has a series of fixes to the MM selftesting code - ZhangPeng continues the folio conversion campaign - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8 - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code - Vishal Moola also has done some folio conversion work - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch * tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits) mm/hugetlb: remove hugetlb_set_page_subpool() mm: nommu: correct the range of mmap_sem_read_lock in task_mem() hugetlb: revert use of page_cache_next_miss() Revert "page cache: fix page_cache_next/prev_miss off by one" mm/vmscan: fix root proactive reclaim unthrottling unbalanced node mm: memcg: rename and document global_reclaim() mm: kill [add|del]_page_to_lru_list() mm: compaction: convert to use a folio in isolate_migratepages_block() mm: zswap: fix double invalidate with exclusive loads mm: remove unnecessary pagevec includes mm: remove references to pagevec mm: rename invalidate_mapping_pagevec to mapping_try_invalidate mm: remove struct pagevec net: convert sunrpc from pagevec to folio_batch i915: convert i915_gpu_error to use a folio_batch pagevec: rename fbatch_count() mm: remove check_move_unevictable_pages() drm: convert drm_gem_put_pages() to use a folio_batch i915: convert shmem_sg_free_table() to use a folio_batch scatterlist: add sg_set_folio() ... |
||
|
Linus Torvalds
|
6aeadf7896 |
Merge tag 'docs-arm64-move' of git://git.lwn.net/linux
Pull arm64 documentation move from Jonathan Corbet: "Move the arm64 architecture documentation under Documentation/arch/. This brings some order to the documentation directory, declutters the top-level directory, and makes the documentation organization more closely match that of the source" * tag 'docs-arm64-move' of git://git.lwn.net/linux: perf arm-spe: Fix a dangling Documentation/arm64 reference mm: Fix a dangling Documentation/arm64 reference arm64: Fix dangling references to Documentation/arm64 dt-bindings: fix dangling Documentation/arm64 reference docs: arm64: Move arm64 documentation under Documentation/arch/ |
||
|
Linus Torvalds
|
582c161cf3 |
Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook: "There are three areas of note: A bunch of strlcpy()->strscpy() conversions ended up living in my tree since they were either Acked by maintainers for me to carry, or got ignored for multiple weeks (and were trivial changes). The compiler option '-fstrict-flex-arrays=3' has been enabled globally, and has been in -next for the entire devel cycle. This changes compiler diagnostics (though mainly just -Warray-bounds which is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_ coverage. In other words, there are no new restrictions, just potentially new warnings. Any new FORTIFY warnings we've seen have been fixed (usually in their respective subsystem trees). For more details, see commit |
||
|
Linus Torvalds
|
8ad78685ff |
Merge tag 'pstore-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook: - Check for out-of-memory condition (Jiasheng Jiang) - Convert to platform remove callback returning void (Uwe Kleine-König) * tag 'pstore-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Add check for kstrdup pstore/ram: Convert to platform remove callback returning void |
||
|
Linus Torvalds
|
d416a46c95 |
Merge tag 'execve-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook: - Fix a few comments for correctness and typos (Baruch Siach) - Small simplifications for binfmt (Christophe JAILLET) - Set p_align to 4 for PT_NOTE in core dump (Fangrui Song) * tag 'execve-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt_elf: fix comment typo s/reset/regset/ elf: correct note name comment binfmt: Slightly simplify elf_fdpic_map_file() binfmt: Use struct_size() coredump, vmcore: Set p_align to 4 for PT_NOTE |
||
|
Linus Torvalds
|
98be618ad0 |
Merge tag 'Smack-for-6.5' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler: "There are two patches, both of which change how Smack initializes the SMACK64TRANSMUTE extended attribute. The first corrects the behavior of overlayfs, which creates inodes differently from other filesystems. The second ensures that transmute attributes specified by mount options are correctly assigned" * tag 'Smack-for-6.5' of https://github.com/cschaufler/smack-next: smack: Record transmuting in smk_transmuted smack: Retrieve transmuting information in smack_inode_getsecurity() |
||
|
Linus Torvalds
|
b4c7f2e6ef |
Merge tag 'integrity-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"An i_version change, one bug fix, and three kernel doc fixes:
- instead of IMA detecting file change by directly accesssing
i_version, it now calls vfs_getattr_nosec().
- fix a race condition when inserting a new node in the iint rb-tree"
* tag 'integrity-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Fix build warnings
evm: Fix build warnings
evm: Complete description of evm_inode_setattr()
integrity: Fix possible multiple allocation in integrity_inode_get()
IMA: use vfs_getattr_nosec to get the i_version
|
||
|
Linus Torvalds
|
21953eb16c |
Merge tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore: - A SafeSetID patch to correct what appears to be a cut-n-paste typo in the code causing a UID to be printed where a GID was desired. This is coming via the LSM tree because we haven't been able to get a response from the SafeSetID maintainer (Micah Morton) in several months. Hopefully we are able to get in touch with Micah, but until we do I'm going to pick them up in the LSM tree. - A small fix to the reiserfs LSM xattr code. We're continuing to work through some issues with the reiserfs code as we try to fixup the LSM xattr handling, but in the process we're uncovering some ugly problems in reiserfs and we may just end up removing the LSM xattr support in reiserfs prior to reiserfs' removal. For better or worse, this shouldn't impact any of the reiserfs users, as we discovered that LSM xattrs on reiserfs were completely broken, meaning no one is currently using the combo of reiserfs and a file labeling LSM. - A tweak to how the cap_user_data_t struct/typedef is declared in the header file to appease the Sparse gods. - In the process of trying to sort out the SafeSetID lost-maintainer problem I realized that I needed to update the labeled networking entry to "Supported". - Minor comment/documentation and spelling fixes. * tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: device_cgroup: Fix kernel-doc warnings in device_cgroup SafeSetID: fix UID printed instead of GID MAINTAINERS: move labeled networking to "supported" capability: erase checker warnings about struct __user_cap_data_struct lsm: fix a number of misspellings reiserfs: Initialize sec->length in reiserfs_security_init(). capability: fix kernel-doc warnings in capability.c |
||
|
Linus Torvalds
|
729b39ec1b |
Merge tag 'selinux-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore: - Thanks to help from the MPTCP folks, it looks like we have finally sorted out a proper solution to the MPTCP socket labeling issue, see the new security_mptcp_add_subflow() LSM hook. - Fix the labeled NFS handling such that a labeled NFS share mounted prior to the initial SELinux policy load is properly labeled once a policy is loaded; more information in the commit description. - Two patches to security/selinux/Makefile, the first took the cleanups in v6.4 a bit further and the second removed the grouped targets support as that functionality doesn't appear to be properly supported prior to make v4.3. - Deprecate the "fs" object context type in SELinux policies. The fs object context type was an old vestige that was introduced back in v2.6.12-rc2 but never really used. - A number of small changes that remove dead code, clean up some awkward bits, and generally improve the quality of the code. See the individual commit descriptions for more information. * tag 'selinux-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: avoid bool as identifier name selinux: fix Makefile for versions of make < v4.3 selinux: make labeled NFS work when mounted before policy load selinux: cleanup exit_sel_fs() declaration selinux: deprecated fs ocon selinux: make header files self-including selinux: keep context struct members in sync selinux: Implement mptcp_add_subflow hook security, lsm: Introduce security_mptcp_add_subflow() selinux: small cleanups in selinux_audit_rule_init() selinux: declare read-only data arrays const selinux: retain const qualifier on string literal in avtab_hash_eval() selinux: drop return at end of void function avc_insert() selinux: avc: drop unused function avc_disable() selinux: adjust typos in comments selinux: do not leave dangling pointer behind selinux: more Makefile tweaks |
||
|
Linus Torvalds
|
cae72026b5 |
Merge tag 'audit-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit update from Paul Moore: "A single audit patch that resolves two compiler warnings regarding missing function prototypes" * tag 'audit-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: avoid missing-prototype warnings |
||
|
Linus Torvalds
|
26642864f8 |
Merge tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün: "Add support for Landlock to UML. To do this, this fixes the way hostfs manages inodes according to the underlying filesystem [1]. They are now properly handled as for other filesystems, which enables Landlock support (and probably other features). This also extends Landlock's tests with 6 pseudo filesystems, including hostfs" [1] https://lore.kernel.org/all/20230612191430.339153-1-mic@digikod.net/ * tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Add hostfs tests selftests/landlock: Add tests for pseudo filesystems selftests/landlock: Make mounts configurable selftests/landlock: Add supports_filesystem() helper selftests/landlock: Don't create useless file layouts hostfs: Fix ephemeral inodes |
||
|
Linus Torvalds
|
6e2332e0ab |
Merge tag 'cgroup-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: - Whenever cpuset needs to rebuild sched_domain, it walked all tasks looking for DEADLINE tasks as they need to be accounted on the new domain. Walking all tasks can be expensive and there may not be any DEADLINE tasks at all. Task iteration is now omitted if there are no DEADLINE tasks - Fixes DEADLINE bandwidth misaccounting after task migration failures - When no controller is enabled, -Wstringop-overflow warning is triggered. The fix patch added an early exit which is too eager and got reverted for now. Will fix later - Everything else is minor cleanups * tag 'cgroup-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: Revert "cgroup: Avoid -Wstringop-overflow warnings" cgroup/misc: Expose misc.current on cgroup v2 root cgroup: Avoid -Wstringop-overflow warnings cgroup: remove obsolete comment on cgroup_on_dfl() cgroup: remove unused task_cgroup_path() cgroup/cpuset: remove unneeded header files cgroup: make cgroup_is_threaded() and cgroup_is_thread_root() static rdmacg: fix kernel-doc warnings in rdmacg cgroup: Replace the css_set call with cgroup_get cgroup: remove unused macro for_each_e_css() cgroup: Update out-of-date comment in cgroup_migrate() cgroup: Replace all non-returning strlcpy with strscpy cgroup/cpuset: remove unneeded header files cgroup/cpuset: Free DL BW in case can_attach() fails sched/deadline: Create DL BW alloc, free & check overflow interface cgroup/cpuset: Iterate only if DEADLINE tasks are present sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets sched/cpuset: Bring back cpuset_mutex cgroup/cpuset: Rename functions dealing with DEADLINE accounting |
||
|
Linus Torvalds
|
72dc6db7e3 |
Merge tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull ordered workqueue creation updates from Tejun Heo: "For historical reasons, unbound workqueues with max concurrency limit of 1 are considered ordered, even though the concurrency limit hasn't been system-wide for a long time. This creates ambiguity around whether ordered execution is actually required for correctness, which was actually confusing for e.g. btrfs (btrfs updates are being routed through the btrfs tree). There aren't that many users in the tree which use the combination and there are pending improvements to unbound workqueue affinity handling which will make inadvertent use of ordered workqueue a bigger loss. This clarifies the situation for most of them by updating the ones which require ordered execution to use alloc_ordered_workqueue(). There are some conversions being routed through subsystem-specific trees and likely a few stragglers. Once they're all converted, workqueue can trigger a warning on unbound + @max_active==1 usages and eventually drop the implicit ordered behavior" * tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues scsi: NCR5380: Use default @max_active for hostdata->work_q media: coda: Use alloc_ordered_workqueue() to create ordered workqueues crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues wifi: mwifiex: Use default @max_active for workqueues wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues greybus: Use alloc_ordered_workqueue() to create ordered workqueues powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues |
||
|
Linus Torvalds
|
7ab044a4f4 |
Merge tag 'wq-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
- Concurrency-managed per-cpu work items that hog CPUs and delay the
execution of other work items are now automatically detected and
excluded from concurrency management. Reporting on such work items
can also be enabled through a config option.
- Added tools/workqueue/wq_monitor.py which improves visibility into
workqueue usages and behaviors.
- Arnd's minimal fix for gcc-13 enum warning on 32bit compiles,
superseded by commit
|
||
|
Linus Torvalds
|
18eb3b6dff |
Merge tag 'for-linus-6.5-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross: - three patches adding missing prototypes - a fix for finding the iBFT in a Xen dom0 for supporting diskless iSCSI boot * tag 'for-linus-6.5-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86: xen: add missing prototypes x86/xen: add prototypes for paravirt mmu functions iscsi_ibft: Fix finding the iBFT under Xen Dom 0 xen: xen_debug_interrupt prototype to global header |
||
|
Linus Torvalds
|
6a46676994 |
Merge tag 's390-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev: - Fix the style of protected key API driver source: use x-mas tree for all local variable declarations - Rework protected key API driver to not use the struct pkey_protkey and pkey_clrkey anymore. Both structures have a fixed size buffer, but with the support of ECC protected key these buffers are not big enough. Use dynamic buffers internally and transparently for userspace - Add support for a new 'non CCA clear key token' with ECC clear keys supported: ECC P256, ECC P384, ECC P521, ECC ED25519 and ECC ED448. This makes it possible to derive a protected key from the ECC clear key input via PKEY_KBLOB2PROTK3 ioctl, while currently the only way to derive is via PCKMO instruction - The s390 PMU of PAI crypto and extension 1 NNPA counters use atomic_t for reference counting. Replace this with the proper data type refcount_t - Select ARCH_SUPPORTS_INT128, but limit this to clang for now, since gcc generates inefficient code, which may lead to stack overflows - Replace one-element array with flexible-array member in struct vfio_ccw_parent and refactor the rest of the code accordingly. Also, prefer struct_size() over sizeof() open- coded versions - Introduce OS_INFO_FLAGS_ENTRY pointing to a flags field and OS_INFO_FLAG_REIPL_CLEAR flag that informs a dumper whether the system memory should be cleared or not once dumped - Fix a hang when a user attempts to remove a VFIO-AP mediated device attached to a guest: add VFIO_DEVICE_GET_IRQ_INFO and VFIO_DEVICE_SET_IRQS IOCTLs and wire up the VFIO bus driver callback to request a release of the device - Fix calculation for R_390_GOTENT relocations for modules - Allow any user space process with CAP_PERFMON capability read and display the CPU Measurement facility counter sets - Rework large statically-defined per-CPU cpu_cf_events data structure and replace it with dynamically allocated structures created when a perf_event_open() system call is invoked or /dev/hwctr device is accessed * tag 's390-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cpum_cf: rework PER_CPU_DEFINE of struct cpu_cf_events s390/cpum_cf: open access to hwctr device for CAP_PERFMON privileged process s390/module: fix rela calculation for R_390_GOTENT s390/vfio-ap: wire in the vfio_device_ops request callback s390/vfio-ap: realize the VFIO_DEVICE_SET_IRQS ioctl s390/vfio-ap: realize the VFIO_DEVICE_GET_IRQ_INFO ioctl s390/pkey: add support for ecc clear key s390/pkey: do not use struct pkey_protkey s390/pkey: introduce reverse x-mas trees s390/zcore: conditionally clear memory on reipl s390/ipl: add REIPL_CLEAR flag to os_info vfio/ccw: use struct_size() helper vfio/ccw: replace one-element array with flexible-array member s390: select ARCH_SUPPORTS_INT128 s390/pai_ext: replace atomic_t with refcount_t s390/pai_crypto: replace atomic_t with refcount_t |
||
|
Linus Torvalds
|
8d8026f376 |
Merge tag 'xtensa-20230627' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa updates from Max Filippov: - clean up platform_* interface of the xtensa architecture - enable HAVE_ASM_MODVERSIONS - drop ARCH_WANT_FRAME_POINTERS - clean up unaligned access exception handler - provide handler for load/store exceptions - various small fixes and cleanups * tag 'xtensa-20230627' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: dump userspace code around the exception PC xtensa: rearrange show_stack output xtensa: add load/store exception handler xtensa: rearrange unaligned exception handler xtensa: always install slow handler for unaligned access exception xtensa: move early_trap_init from kasan_early_init to init_arch xtensa: drop ARCH_WANT_FRAME_POINTERS xtensa: report trax and perf counters in cpuinfo xtensa: add asm-prototypes.h xtensa: only build __strncpy_user with CONFIG_ARCH_HAS_STRNCPY_FROM_USER xtensa: drop bcopy implementation xtensa: drop EXPORT_SYMBOL for common_exception_return xtensa: boot-redboot: clean up Makefile xtensa: clean up default platform functions xtensa: drop platform_halt and platform_power_off xtensa: drop platform_restart xtensa: drop platform_heartbeat xtensa: xt2000: drop empty platform_init |
||
|
Dinh Nguyen
|
0ae6122996 |
Revert "nios2: Convert __pte_free_tlb() to use ptdescs"
This reverts commit
|
||
|
Linus Torvalds
|
6f612579be |
Merge tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
DWARF creates almost 200 million relocations, ballooning objtool's
peak heap usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce
objtool's peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
Fixes for modern stack canary handling"
* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
objtool: Skip reading DWARF section data
objtool: Free insns when done
objtool: Get rid of reloc->rel[a]
objtool: Shrink elf hash nodes
objtool: Shrink reloc->sym_reloc_entry
objtool: Get rid of reloc->jump_table_start
objtool: Get rid of reloc->addend
objtool: Get rid of reloc->type
objtool: Get rid of reloc->offset
objtool: Get rid of reloc->idx
objtool: Get rid of reloc->list
objtool: Allocate relocs in advance for new rela sections
objtool: Add for_each_reloc()
objtool: Don't free memory in elf_close()
objtool: Keep GElf_Rel[a] structs synced
objtool: Add elf_create_section_pair()
objtool: Add mark_sec_changed()
objtool: Fix reloc_hash size
objtool: Consolidate rel/rela handling
...
|
||
|
Linus Torvalds
|
4d6751815b |
Merge tag 'x86-mm-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar: - Remove Xen-PV leftovers from init_32.c - Fix __swp_entry_to_pte() warning splat for Xen PV guests, triggered on CONFIG_DEBUG_VM_PGTABLE=y * tag 'x86-mm-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Remove Xen-PV leftovers from init_32.c x86/mm: Fix __swp_entry_to_pte() for Xen PV guests |
||
|
Linus Torvalds
|
a193cc7506 |
Merge tag 'perf-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Rework & fix the event forwarding logic by extending the core
interface.
This fixes AMD PMU events that have to be forwarded from the
core PMU to the IBS PMU.
- Add self-tests to test AMD IBS invocation via core PMU events
- Clean up Intel FixCntrCtl MSR encoding & handling
* tag 'perf-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Re-instate the linear PMU search
perf/x86/intel: Define bit macros for FixCntrCtl MSR
perf test: Add selftest to test IBS invocation via core pmu events
perf/core: Remove pmu linear searching code
perf/ibs: Fix interface via core pmu events
perf/core: Rework forwarding of {task|cpu}-clock events
|
||
|
Linus Torvalds
|
bc6cb4d5bc |
Merge tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()
The cmpxchg128() family of functions is basically & functionally the
same as cmpxchg_double(), but with a saner interface.
Instead of a 6-parameter horror that forced u128 - u64/u64-halves
layout details on the interface and exposed users to complexity,
fragility & bugs, use a natural 3-parameter interface with u128
types.
- Restructure the generated atomic headers, and add kerneldoc comments
for all of the generic atomic{,64,_long}_t operations.
The generated definitions are much cleaner now, and come with
documentation.
- Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
taking multiple locks of the same type.
This gets rid of one use of lockdep_set_novalidate_class() in the
bcache code.
- Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
shadowing generating garbage code on Clang on certain ARM builds.
* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
locking/atomic: treewide: delete arch_atomic_*() kerneldoc
locking/atomic: docs: Add atomic operations to the driver basic API documentation
locking/atomic: scripts: generate kerneldoc comments
docs: scripts: kernel-doc: accept bitwise negation like ~@var
locking/atomic: scripts: simplify raw_atomic*() definitions
locking/atomic: scripts: simplify raw_atomic_long*() definitions
locking/atomic: scripts: split pfx/name/sfx/order
locking/atomic: scripts: restructure fallback ifdeffery
locking/atomic: scripts: build raw_atomic_long*() directly
locking/atomic: treewide: use raw_atomic*_<op>()
locking/atomic: scripts: add trivial raw_atomic*_<op>()
locking/atomic: scripts: factor out order template generation
locking/atomic: scripts: remove leftover "${mult}"
locking/atomic: scripts: remove bogus order parameter
locking/atomic: xtensa: add preprocessor symbols
locking/atomic: x86: add preprocessor symbols
locking/atomic: sparc: add preprocessor symbols
locking/atomic: sh: add preprocessor symbols
...
|
||
|
Linus Torvalds
|
ed3b7923a8 |
Merge tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of
higher-frequency SMT cores and lower-frequency non-SMT cores),
under the old code lower-priority CPUs pulled tasks from the
higher-priority cores if more than one SMT sibling was busy -
resulting in many unnecessary task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores
with more than one busy sibling and allows lower-priority CPUs
to pull tasks, which avoids superfluous migrations and lets
lower-priority cores inspect all SMT siblings for the busiest
queue.
- Implement the 'runnable boosting' feature in the EAS balancer:
consider CPU contention in frequency, EAS max util & load-balance
busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves
other key workloads unchanged.
Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it into
the build_sched_topology() helper function and building it
dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations
- Fix task_struct::saved_state handling
- Fix various rq clock update bugs, unearthed by turning on the rq
clock debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger
by creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or
CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation to
(maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings"
* tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()
sched/core: Avoid double calling update_rq_clock() in __balance_push_cpu_stop()
sched/core: Fixed missing rq clock update before calling set_rq_offline()
sched/deadline: Update GRUB description in the documentation
sched/deadline: Fix bandwidth reclaim equation in GRUB
sched/wait: Fix a kthread_park race with wait_woken()
sched/topology: Mark set_sched_topology() __init
sched/fair: Rename variable cpu_util eff_util
arm64/arch_timer: Fix MMIO byteswap
sched/fair, cpufreq: Introduce 'runnable boosting'
sched/fair: Refactor CPU utilization functions
cpuidle: Use local_clock_noinstr()
sched/clock: Provide local_clock_noinstr()
x86/tsc: Provide sched_clock_noinstr()
clocksource: hyper-v: Provide noinstr sched_clock()
clocksource: hyper-v: Adjust hv_read_tsc_page_tsc() to avoid special casing U64_MAX
x86/vdso: Fix gettimeofday masking
math64: Always inline u128 version of mul_u64_u64_shr()
s390/time: Provide sched_clock_noinstr()
loongarch: Provide noinstr sched_clock_read()
...
|
||
|
Linus Torvalds
|
e8f75c0270 |
Merge tag 'x86_sgx_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SGX update from Borislav Petkov: - A fix to avoid using a list iterator variable after the loop it is used in * tag 'x86_sgx_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Avoid using iterator after loop in sgx_mmu_notifier_release() |