The cirrus driver only works on emulated Cirrus hardware. Use the
correct types for encoder and connector.
As a side effect, the connector has no longer an EDID property. But
neither cirrus emulation nor driver provide any EDID data, so it
makes sense to not pretend that there could be one.
v2:
- mention removed EDID property in commit description (Dmitry)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029143928.208349-2-tzimmermann@suse.de
Seems to be like NV140DRM-N61 but with touch. Haven't disassembled
the lid to look.
Due to lack of information, use the delay_200_500_e200 timings like
many other BOE panels do for now.
The raw EDID of the panel is:
00 ff ff ff ff ff ff 00 09 e5 93 0c 00 00 00 00
25 21 01 04 a5 1e 13 78 03 ee 95 a3 54 4c 99 26
0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 a4 57 c0 dc 80 78 78 50 30 20
f6 0c 2e bc 10 00 00 1a 6d 3a c0 dc 80 78 78 50
30 20 f6 0c 2e bc 10 00 00 1a 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02
00 0d 36 ff 0a 3c 96 0f 09 15 96 00 00 00 01 8b
There are no timings in it, sadly.
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[dianders: adjusted sort order]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241124-hp-omnibook-x14-v1-3-e4262f0254fa@oldschoolsolutions.biz
It has been observed that sometimes DSS will trigger an interrupt and
the top level interrupt (DISPC_IRQSTATUS) is not zero, but the VP and
VID level interrupt-statuses are zero.
As the top level irqstatus is supposed to tell whether we have VP/VID
interrupts, the thinking of the driver authors was that this particular
case could never happen. Thus the driver only clears the DISPC_IRQSTATUS
bits which has corresponding interrupts in VP/VID status. So when this
issue happens, the driver will not clear DISPC_IRQSTATUS, and we get an
interrupt flood.
It is unclear why the issue happens. It could be a race issue in the
driver, but no such race has been found. It could also be an issue with
the HW. However a similar case can be easily triggered by manually
writing to DISPC_IRQSTATUS_RAW. This will forcibly set a bit in the
DISPC_IRQSTATUS and trigger an interrupt, and as the driver never clears
the bit, we get an interrupt flood.
To fix the issue, always clear DISPC_IRQSTATUS. The concern with this
solution is that if the top level irqstatus is the one that triggers the
interrupt, always clearing DISPC_IRQSTATUS might leave some interrupts
unhandled if VP/VID interrupt statuses have bits set. However, testing
shows that if any of the irqstatuses is set (i.e. even if
DISPC_IRQSTATUS == 0, but a VID irqstatus has a bit set), we will get an
interrupt.
Co-developed-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Co-developed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Fixes: 32a1795f57 ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Cc: stable@vger.kernel.org
Tested-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-1-82ddaec94e4a@ideasonboard.com
There different types of BOs are supported:
- shmem
A user application uses shmem BOs as input/output for its workload running
on NPU.
- device memory heap
The fixed size buffer dedicated to the device.
- device buffer
The buffer object allocated from device memory heap.
- command buffer
The buffer object created for delivering commands. The command buffer
object is small and pinned on creation.
New IOCTLs are added: CREATE_BO, GET_BO_INFO, SYNC_BO. SYNC_BO is used
to explicitly flush CPU cache for BO memory.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-7-lizhi.hou@amd.com
The hardware can be shared among multiple user applications. The
hardware resources are allocated/freed based on the request from
user application via driver IOCTLs.
DRM_IOCTL_AMDXDNA_CREATE_HWCTX
Allocate tile columns and create a hardware context structure to track the
usage and status of the resources. A hardware context ID is returned for
XDNA command execution.
DRM_IOCTL_AMDXDNA_DESTROY_HWCTX
Release hardware context based on its ID. The tile columns belong to
this hardware context will be reclaimed.
DRM_IOCTL_AMDXDNA_CONFIG_HWCTX
Config hardware context. Bind the hardware context to the required
resources.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-6-lizhi.hou@amd.com
The hardware mailboxes are used by the driver to submit requests to
firmware and receive the completion notices from hardware.
Initially, a management mailbox channel is up and running. The driver may
request firmware to create/destroy more channels dynamically through
management channel.
Add driver internal mailbox interfaces.
- create/destroy a mailbox channel instance
- send a message to the firmware through a specific channel
- wait for a notification from the specific channel
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-4-lizhi.hou@amd.com
Re-introduce a line-by-line composition algorithm for each pixel format.
This allows more performance by not requiring an indirection per pixel
read. This patch is focused on readability of the code.
Line-by-line composition was introduced by [1] but rewritten back to
pixel-by-pixel algorithm in [2]. At this time, nobody noticed the impact
on performance, and it was merged.
This patch is almost a revert of [2], but in addition efforts have been
made to increase readability and maintainability of the rotation handling.
The blend function is now divided in two parts:
- Transformation of coordinates from the output referential to the source
referential
- Line conversion and blending
Most of the complexity of the rotation management is avoided by using
drm_rect_* helpers. The remaining complexity is around the clipping, to
avoid reading/writing outside source/destination buffers.
The pixel conversion is now done line-by-line, so the read_pixel_t was
replaced with read_pixel_line_t callback. This way the indirection is only
required once per line and per plane, instead of once per pixel and per
plane.
The read_line_t callbacks are very similar for most pixel format, but it
is required to avoid performance impact. Some helpers for color
conversion were introduced to avoid code repetition:
- *_to_argb_u16: perform colors conversion. They should be inlined by the
compiler, and they are used to avoid repetition between multiple variants
of the same format (argb/xrgb and maybe in the future for formats like
bgr formats).
This new algorithm was tested with:
- kms_plane (for color conversions)
- kms_rotation_crc (for rotations of planes)
- kms_cursor_crc (for translations of planes)
- kms_rotation (for all rotations and formats combinations) [3]
The performance gain was mesured with kms_fb_stress [4] with some
modification to fix the writeback format.
The performance improvement is around 5 to 10%.
[1]: commit 8ba1648567 ("drm: vkms: Refactor the plane composer to accept
new formats")
https://lore.kernel.org/all/20220905190811.25024-7-igormtorrente@gmail.com/
[2]: commit 322d716a3e ("drm/vkms: isolate pixel conversion
functionality")
https://lore.kernel.org/all/20230418130525.128733-2-mcanal@igalia.com/
[3]: https://lore.kernel.org/igt-dev/20240313-new_rotation-v2-0-6230fd5cae59@bootlin.com/
[4]: https://lore.kernel.org/all/20240422-kms_fb_stress-dev-v5-0-0c577163dc88@riseup.net/
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118-yuv-v14-8-2dbc2f1e222c@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The pixel_read_direction enum is useful to describe the reading direction
in a plane. It avoids using the rotation property of DRM, which not
practical to know the direction of reading.
This patch also introduce two helpers, one to compute the
pixel_read_direction from the DRM rotation property, and one to compute
the step, in byte, between two successive pixel in a specific direction.
Acked-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118-yuv-v14-7-2dbc2f1e222c@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Introduce the usage of block_h/block_w to compute the offset and the
pointer of a pixel. The previous implementation was specialized for
planes with block_h == block_w == 1. To avoid confusion and allow easier
implementation of tiled formats. It also remove the usage of the
deprecated format field `cpp`.
Introduce the plane_index parameter to get an offset/pointer on a
different plane.
Acked-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118-yuv-v14-5-2dbc2f1e222c@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Introduce two typedefs: pixel_read_t and pixel_write_t. It allows the
compiler to check if the passed functions take the correct arguments.
Such typedefs will help ensuring consistency across the code base in
case of update of these prototypes.
Rename input/output variable in a consistent way between read_line and
write_line.
A warn has been added in get_pixel_*_function to alert when an unsupported
pixel format is requested. As those formats are checked before
atomic_update callbacks, it should never happen.
Document for those typedefs.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118-yuv-v14-3-2dbc2f1e222c@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit
7d1fd3638e ("drm/v3d: Stop the active perfmon before being destroyed").
Cc: stable@vger.kernel.org # v5.15+
Fixes: 26a4dc29b7 ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118221948.1758130-1-christian.gmeiner@gmail.com
VKMS currently supports only one CRTC, so it make no sense to have this
index configurable. To avoid issues, replace this hardcoded index by
drm_crtc_mask when applicable.
There is no need to manually set a crtc mask on primary and cursor plane
as it is automatically set by drmm_crtc_alloc_with_planes.
In addition, this will remove the use of an uninitialized structure in
vkms_add_overlay_plane. This currently works by chance because two things:
- vkms_plane_init always set a possible_crtcs value, so the problematic
branch is never used;
- drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
always have this id.
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-vkms-remove-index-v3-1-976321a3f801@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Stop checking the FW halt_status as MCU_STATUS should be sufficient.
This should make the check for successful FW halt and subsequently
setting fast_reset to true more robust.
We should also clear GLB_REQ.GLB_HALT bit only on post-reset prior
to starting the FW and only if we're doing a fast reset, because
the slow reset will re-initialize all FW sections, including the
global interface.
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/r/20241119135030.3352939-1-karunika.choo@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
This commit fixes the potential misalignment between the value of device
tree property "dma-coherent" and default value of COHERENCY_ENABLE
register.
Panthor driver didn't explicitly program the COHERENCY_ENABLE register
with the desired coherency mode. The default value of COHERENCY_ENABLE
register is implementation defined, so it may not be always aligned with
the "dma-coherent" property value.
The commit also checks the COHERENCY_FEATURES register to confirm that
the coherency protocol is actually supported or not.
v2:
- Added R-b tags
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241030225407.4077513-3-akash.goel@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
