The NVMe Base Specification 8.3.5.5.9 states that the session key Ks
shall be computed from the ephemeral DH key by applying the hash
function selected by the HashID parameter.
The current implementation stores the raw DH shared secret as the
session key without hashing it. This causes redundant hash operations:
1. Augmented challenge computation (section 8.3.5.5.4) requires
Ca = HMAC(H(g^xy mod p), C). The code compensates by hashing the
unhashed session key in nvme_auth_augmented_challenge() to produce
the correct result.
2. PSK generation (section 8.3.5.5.9) requires PSK = HMAC(Ks, C1 || C2)
where Ks should already be H(g^xy mod p). As the DH shared secret
is always larger than the HMAC block size, HMAC internally hashes
it before use, accidentally producing the correct result.
When using secure channel concatenation with bidirectional
authentication, this results in hashing the DH value three times: twice
for augmented challenge calculations and once during PSK generation.
Fix this by:
- Modifying nvme_auth_gen_shared_secret() to hash the DH shared secret
once after computation: Ks = H(g^xy mod p)
- Removing the hash operation from nvme_auth_augmented_challenge()
as the session key is now already hashed
- Updating session key buffer size from DH key size to hash output size
- Adding specification references in comments
This avoid storing the raw DH shared secret and reduces the number of
hash operations from three to one when using secure channel
concatenation.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
We can batch admin commands submitted through io_uring_cmd passthrough,
which means bd->last may be false and skips the doorbell write to
aggregate multiple commands per write. If a subsequent command can't be
dispatched for whatever reason, we have to provide the blk-mq ops'
commit_rqs callback in order to ensure we properly update the doorbell.
Fixes: 58e5bdeb9c ("nvme: enable uring-passthrough for admin commands")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Section 8.3.4.5.5 of the NVMe Base Specification 2.1 describes what is
included in the Response Value (RVAL) hash and SC_C should be included.
Currently we are hardcoding 0 instead of using the correct SC_C value.
Update the host and target code to use the SC_C when calculating the
RVAL instead of using 0.
Fixes: e88a7595b5 ("nvme-tcp: request secure channel concatenation")
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Curently after the host sends a REPLACETLSPSK we free the TLS keys as
part of calling nvmet_auth_sq_free() on success. This means when the
host sends a follow up REPLACETLSPSK we return CONCAT_MISMATCH as the
check for !nvmet_queue_tls_keyid(req->sq) fails.
A previous attempt to fix this involed not calling nvmet_auth_sq_free()
on successful connections, but that results in memory leaks. Instead we
should not clear `tls_key` in nvmet_auth_sq_free(), as that was
incorrectly wiping the tls keys which are used for the session.
This patch ensures we correctly free the ephemeral session key on
connection, yet we don't free the TLS key unless closing the connection.
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The command was never dispatched for the driver's "host path error", so
the command was never actually initialized and there's no corresponding
submit trace for the completion.
Reported-by: Minsik Jeon <hmi.jeon@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The Memblaze Pblaze5 NVMe device (PCI ID 0x1c5f:0x0555)
is detected as a controller on recent kernels (tested on 5.15.85
and 6.8.4), but no namespace is exposed.
Tools like lsblk and fdisk do not report any block device.
dmesg shows:
nvme nvme0: missing or invalid SUBNQN field.
The device works correctly on older kernels (e.g. 4.19), suggesting
a compatibility issue with newer namespace handling.
This indicates the device does not properly support the
Namespace Descriptor List feature.
Applying NVME_QUIRK_NO_NS_DESC_LIST allows the namespace to be
discovered correctly.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Tao Jiang <tanroame.kyle@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The delayed disk removal work is canceled when a NS (re)appears. However,
we do not put the module reference grabbed in nvme_mpath_remove_disk(), so
fix that.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
It is not possible to determine the active TLS mode from the
presence or absence of sysfs attributes like tls_key,
tls_configured_key, or dhchap_secret.
With the introduction of the concat mode and optional DH-CHAP
authentication, different configurations can result in identical
sysfs state. This makes user space detection unreliable.
Expose the TLS mode explicitly to allow user space to
unambiguously identify the active configuration and avoid
fragile heuristics in nvme-cli.
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Commit 03b3bcd319 ("nvme: fix admin request_queue lifetime") moved the
admin queue reference ->put call into nvme_free_ctrl() - a controller
device release callback performed for every nvme driver doing
nvme_init_ctrl().
nvme-apple sets refcount of the admin queue to 1 at allocation during the
probe function and then puts it twice now:
nvme_free_ctrl()
blk_put_queue(ctrl->admin_q) // #1
->free_ctrl()
apple_nvme_free_ctrl()
blk_put_queue(anv->ctrl.admin_q) // #2
Note that there is a commit 941f7298c7 ("nvme-apple: remove an extra
queue reference") which intended to drop taking an extra admin queue
reference. Looks like at that moment it accidentally fixed a refcount
leak, which existed since the driver's introduction. There were two ->get
calls at driver's probe function and a single ->put inside
apple_nvme_free_ctrl().
However now after commit 03b3bcd319 ("nvme: fix admin request_queue
lifetime") the refcount is imbalanced again. Fix it by removing extra
->put call from apple_nvme_free_ctrl(). anv->dev and ctrl->dev point to
the same device, so use ctrl->dev directly for simplification. Compile
tested only.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 03b3bcd319 ("nvme: fix admin request_queue lifetime")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In the declaration of the structure "core_quirks[]", in the comment
referred to the devices "Kioxia CD6-V Series / HPE PE8030", the
parameter "default_ps_max_latency_us" is reported in a wrong way:
nvme_core.default_ps_max_latency=0
The correct form is, instead:
nvme_core.default_ps_max_latency_us=0
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A NS will always have a head pointer, so drop the check. As proof in
practice, all the nvme_mpath_clear_current_path() callers also
dereference ns->head.
This check has endured since the original changes to support multipath.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The firmware for Samsung 970 Evo Plus / PM981 / PM983 does not support SUBNQN.
Make quirks to suppress warnings.
# nvme id-ctrl /dev/nvme1n1
NVME Identify Controller:
vid : 0x144d
ssvid : 0x144d
sn : ***
mn : Samsung SSD 970 EVO Plus 500GB
fr : 2B2QEXM7
mcdqpc : 0
subnqn :
ioccsz : 0
Signed-off-by: Alan Cui <me@alancui.cc>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.
If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.
If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.
The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.
Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.
Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes.
Fixes: c46a6465bac2 ("nvmet-tcp: add NVMe over TCP target driver")
Cc: stable@vger.kernel.org
Reported-by: Shivam Kumar <skumar47@syr.edu>
Tested-by: Shivam Kumar <kumar.shivam43666@gmail.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Executing nvmet_tcp_fatal_error() is generally the responsibility
of the caller (nvmet_tcp_try_recv); all other functions should
just return the error code.
Remove the nvmet_tcp_fatal_error() function, it's not needed
anymore.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, when nvmet_tcp_build_pdu_iovec() detects an out-of-bounds
PDU length or offset, it triggers nvmet_tcp_fatal_error(cmd->queue)
and returns early. However, because the function returns void, the
callers are entirely unaware that a fatal error has occurred and
that the cmd->recv_msg.msg_iter was left uninitialized.
Callers such as nvmet_tcp_handle_h2c_data_pdu() proceed to blindly
overwrite the queue state with queue->rcv_state = NVMET_TCP_RECV_DATA
Consequently, the socket receiving loop may attempt to read incoming
network data into the uninitialized iterator.
Fix this by shifting the error handling responsibility to the callers.
Fixes: 52a0a98549 ("nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Yunje Shin <ioerts@kookmin.ac.kr>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Using this port configuration, one will be able to set the Maximum Data
Transfer Size (MDTS) for any controller that will be associated to the
configured port. The default value remains 0 (no limit).
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Aurelien Aptel <aaptel@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The generic fabrics layer uses request_module("nvme-%s", opts->transport)
to auto-load transport modules. Currently, the nvme-tcp, nvme-rdma, and
nvme-fc modules lack MODULE_ALIAS entries for these names, which prevents
the kernel from automatically finding and loading them when requested.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected,
nvmet_req_uninit() is called unconditionally. However, if the command
arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init()
had returned false and percpu_ref_tryget_live() was never executed. The
unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a
refcount underflow, leading to a WARNING in
percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and
eventually a permanent workqueue deadlock.
Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling
nvmet_req_uninit(), matching the existing pattern in
nvmet_tcp_execute_request().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shivam Kumar <kumar.shivam43666@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
wbt_init_enable_default() uses WARN_ON_ONCE to check for failures from
wbt_alloc() and wbt_init(). However, both are expected failure paths:
- wbt_alloc() can return NULL under memory pressure (-ENOMEM)
- wbt_init() can fail with -EBUSY if wbt is already registered
syzbot triggers this by injecting memory allocation failures during MTD
partition creation via ioctl(BLKPG), causing a spurious warning.
wbt_init_enable_default() is a best-effort initialization called from
blk_register_queue() with a void return type. Failure simply means the
disk operates without writeback throttling, which is harmless.
Replace WARN_ON_ONCE with plain if-checks, consistent with how
wbt_set_lat() in the same file already handles these failures. Add a
pr_warn() for the wbt_init() failure to retain diagnostic information
without triggering a full stack trace.
Reported-by: syzbot+71fcf20f7c1e5043d78c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=71fcf20f7c1e5043d78c
Fixes: 41afaeeda5 ("blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter")
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://patch.msgid.link/20260316070358.65225-2-ytohnuki@amazon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before the fix, teardown of a ublk server that was attempting to recover
a device, but died when it had submitted a nonempty proper subset of the
fetch commands to any queue would loop forever. Add a test to verify
that, after the fix, teardown completes. This is done by:
- Adding a new argument to the fault_inject target that causes it die
after fetching a nonempty proper subset of the IOs to a queue
- Using that argument in a new test while trying to recover an
already-created device
- Attempting to delete the ublk device at the end of the test; this
hangs forever if teardown from the fault-injected ublk server never
completed.
It was manually verified that the test passes with the fix and hangs
without it.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260405-cancel-v2-2-02d711e643c2@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a ublk server starts recovering devices but dies before issuing fetch
commands for all IOs, cancellation of the fetch commands that were
successfully issued may never complete. This is because the per-IO
canceled flag can remain set even after the fetch for that IO has been
submitted - the per-IO canceled flags for all IOs in a queue are reset
together only once all IOs for that queue have been fetched. So if a
nonempty proper subset of the IOs for a queue are fetched when the ublk
server dies, the IOs in that subset will never successfully be canceled,
as their canceled flags remain set, and this prevents ublk_cancel_cmd
from actually calling io_uring_cmd_done on the commands, despite the
fact that they are outstanding.
Fix this by resetting the per-IO cancel flags immediately when each IO
is fetched instead of waiting for all IOs for the queue (which may never
happen).
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Fixes: 728cbac5fe ("ublk: move device reset into ublk_ch_release()")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: zhang, the-essence-of-life <zhangweize9@gmail.com>
Link: https://patch.msgid.link/20260405-cancel-v2-1-02d711e643c2@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the previous patch ("bcache: fix cached_dev.sb_bio use-after-free and
crash"), we adopted a simple modification suggestion from AI to fix the
use-after-free.
But in actual testing, we found an extreme case where the device is
stopped before calling bch_write_bdev_super().
At this point, struct closure sb_write has not been initialized yet.
For this patch, we ensure that sb_bio has been completed via
sb_write_mutex.
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@fnnas.com>
Link: https://patch.msgid.link/20260403042135.2221247-1-colyli@fnnas.com
Fixes: fec114a98b ("bcache: fix cached_dev.sb_bio use-after-free and crash")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In our production environment, we have received multiple crash reports
regarding libceph, which have caught our attention:
```
[6888366.280350] Call Trace:
[6888366.280452] blk_update_request+0x14e/0x370
[6888366.280561] blk_mq_end_request+0x1a/0x130
[6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd]
[6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd]
[6888366.280903] __complete_request+0x22/0x70 [libceph]
[6888366.281032] osd_dispatch+0x15e/0xb40 [libceph]
[6888366.281164] ? inet_recvmsg+0x5b/0xd0
[6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph]
[6888366.281405] ceph_con_process_message+0x79/0x140 [libceph]
[6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph]
[6888366.281661] ceph_con_workfn+0x329/0x680 [libceph]
```
After analyzing the coredump file, we found that the address of
dc->sb_bio has been freed. We know that cached_dev is only freed when it
is stopped.
Since sb_bio is a part of struct cached_dev, rather than an alloc every
time. If the device is stopped while writing to the superblock, the
released address will be accessed at endio.
This patch hopes to wait for sb_write to complete in cached_dev_free.
It should be noted that we analyzed the cause of the problem, then tell
all details to the QWEN and adopted the modifications it made.
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Fixes: cafe563591 ("bcache: A block layer cache")
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Coly Li <colyli@fnnas.com>
Link: https://patch.msgid.link/20260322134102.480107-1-colyli@fnnas.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a bio is allocated from the mempool with REQ_ALLOC_CACHE set and
later completed, bio_put() places it into the per-cpu bio_alloc_cache
via bio_put_percpu_cache() instead of freeing it back to the
mempool/slab. The slab allocation remains tracked by kmemleak, but the
only reference to the bio is through the percpu cache's free_list,
which kmemleak fails to trace through percpu memory. This causes
kmemleak to report the cached bios as unreferenced objects.
Use symmetric kmemleak_free()/kmemleak_alloc() calls to properly track
bios across percpu cache transitions:
- bio_put_percpu_cache: call kmemleak_free() when a bio enters the
cache, unregistering it from kmemleak tracking.
- bio_alloc_percpu_cache: call kmemleak_alloc() when a bio is taken
from the cache for reuse, re-registering it so that genuine leaks
of reused bios remain detectable.
- __bio_alloc_cache_prune: call kmemleak_alloc() before bio_free() so
that kmem_cache_free()'s internal kmemleak_free() has a matching
allocation to pair with.
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260326144058.2392319-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the missing put_disk() on the error path in
blkcg_maybe_throttle_current(). When blkcg lookup, blkg lookup, or
blkg_tryget() fails, the function jumps to the out label which only
calls rcu_read_unlock() but does not release the disk reference acquired
by blkcg_schedule_throttle() via get_device(). Since current->throttle_disk
is already set to NULL before the lookup, blkcg_exit() cannot release
this reference either, causing the disk to never be freed.
Restore the reference release that was present as blk_put_queue() in the
original code but was inadvertently dropped during the conversion from
request_queue to gendisk.
Fixes: f05837ed73 ("blk-cgroup: store a gendisk to throttle in struct task_struct")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260331085054.46857-1-liu.yun@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce the new max_open_zones option to allow specifying a limit on
the maximum number of open zones of a zloop device. This change allows
creating a zloop device that can more closely mimick the characteristics
of a physical SMR drive.
When set to a non zero value, only up to max_open_zones zones can be in
the implicit open (BLK_ZONE_COND_IMP_OPEN) and explicit open
(BLK_ZONE_COND_EXP_OPEN) conditions at any time. The transition to the
implicit open condition of a zone on a write operation can result in an
implicit close of an already implicitly open zone. This is handled in
the function zloop_do_open_zone(). This function also handles
transitions to the explicit open condition. Implicit close transitions
are handled using an LRU ordered list of open zones which is managed
using the helper functions zloop_lru_rotate_open_zone() and
zloop_lru_remove_open_zone().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260326203245.946830-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When LOOP_CONFIGURE is called with LO_FLAGS_PARTSCAN, the following
sequence occurs:
1. disk_force_media_change() sets GD_NEED_PART_SCAN
2. Uevent suppression is lifted and a KOBJ_CHANGE uevent is sent
3. loop_global_unlock() releases the lock
4. loop_reread_partitions() calls bdev_disk_changed() to scan
There is a race between steps 2 and 4: when udev receives the uevent
and opens the device before loop_reread_partitions() runs,
blkdev_get_whole() in bdev.c sees GD_NEED_PART_SCAN set and calls
bdev_disk_changed() for a first scan. Then loop_reread_partitions()
does a second scan. The open_mutex serializes these two scans, but
does not prevent both from running.
The second scan in bdev_disk_changed() drops all partition devices
from the first scan (via blk_drop_partitions()) before re-adding
them, causing partition block devices to briefly disappear. This
breaks any systemd unit with BindsTo= on the partition device: systemd
observes the device going dead, fails the dependent units, and does
not retry them when the device reappears.
Fix this by removing the GD_NEED_PART_SCAN set from
disk_force_media_change() entirely. None of the current callers need
the lazy on-open partition scan triggered by this flag:
- floppy: sets GENHD_FL_NO_PART, so disk_has_partscan() is always
false and GD_NEED_PART_SCAN has no effect.
- loop (loop_configure, loop_change_fd): when LO_FLAGS_PARTSCAN is
set, loop_reread_partitions() performs an explicit scan. When not
set, GD_SUPPRESS_PART_SCAN prevents the lazy scan path.
- loop (__loop_clr_fd): calls bdev_disk_changed() explicitly if
LO_FLAGS_PARTSCAN is set.
- nbd (nbd_clear_sock_ioctl): capacity is set to zero immediately
after; nbd manages GD_NEED_PART_SCAN explicitly elsewhere.
With GD_NEED_PART_SCAN no longer set by disk_force_media_change(),
udev opening the loop device after the uevent no longer triggers a
redundant scan in blkdev_get_whole(), and only the single explicit
scan from loop_reread_partitions() runs.
A regression test for this bug has been submitted to blktests:
https://github.com/linux-blktests/blktests/pull/240.
Fixes: 9f65c489b6 ("loop: raise media_change event")
Signed-off-by: Daan De Meyer <daan@amutable.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://patch.msgid.link/20260331105130.1077599-1-daan@amutable.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The TCG Opal device could enter a state where no new session can be
created, blocking even Discovery or PSID reset. While a power cycle
or waiting for the timeout should work, there is another possibility
for recovery: using the Stack Reset command.
The Stack Reset command is defined in the TCG Storage Architecture Core
Specification and is mandatory for all Opal devices (see Section 3.3.6
of the Opal SSC specification).
This patch implements the Stack Reset command. Sending it should clear
all active sessions immediately, allowing subsequent commands to run
successfully. While it is a TCG transport layer command, the Linux
kernel implements only Opal ioctls, so it makes sense to use the
IOC_OPAL ioctl interface.
The Stack Reset takes no arguments; the response can be success or pending.
If the command reports a pending state, userspace can try to repeat it;
in this case, the code returns -EBUSY.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Ondrej Kozina <okozina@redhat.com>
Link: https://patch.msgid.link/20260310095349.411287-1-gmazyland@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe updates from Keith:
"- Fabrics authentication updates (Eric, Alistar)
- Enanced block queue limits support (Caleb)
- Workqueue usage updates (Marco)
- A new write zeroes device quirk (Robert)
- Tagset cleanup fix for loop device (Nilay)"
* tag 'nvme-7.1-2026-03-27' of git://git.infradead.org/nvme: (41 commits)
nvme-loop: do not cancel I/O and admin tagset during ctrl reset/shutdown
nvme: add WQ_PERCPU to alloc_workqueue users
nvmet-fc: add WQ_PERCPU to alloc_workqueue users
nvmet: replace use of system_wq with system_percpu_wq
nvme-auth: Don't propose NVME_AUTH_DHGROUP_NULL with SC_C
nvme: Add the DHCHAP maximum HD IDs
nvme-pci: add NVME_QUIRK_DISABLE_WRITE_ZEROES for Kingston OM3SGP4
nvme: respect NVME_QUIRK_DISABLE_WRITE_ZEROES when wzsl is set
nvmet: report NPDGL and NPDAL
nvmet: use NVME_NS_FEAT_OPTPERF_SHIFT
nvme: set discard_granularity from NPDG/NPDA
nvme: add from0based() helper
nvme: always issue I/O Command Set specific Identify Namespace
nvme: update nvme_id_ns OPTPERF constants
nvme: fold nvme_config_discard() into nvme_update_disk_info()
nvme: add preferred I/O size fields to struct nvme_id_ns_nvm
nvme: Allow reauth from sysfs
nvme: Expose the tls_configured sysfs for secure concat connections
nvmet-tcp: Don't free SQ on authentication success
nvmet-tcp: Don't error if TLS is enabed on a reset
...
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Cc: Justin Tee <justin.tee@broadcom.com>
Cc: Naresh Gottumukkala <nareshgottumukkala83@gmail.com>
CC: Paul Ely <paul.ely@broadcom.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Section 8.3.4.5.2 of the NVMe 2.1 base spec states that
"""
The 00h identifier shall not be proposed in an AUTH_Negotiate message
that requests secure channel concatenation (i.e., with the SC_C field
set to a non-zero value).
"""
We need to ensure that we don't set the NVME_AUTH_DHGROUP_NULL idlist if
SC_C is set.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kamaljit Singh <kamaljit.singh@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In preperation for using DHCHAP length in upcoming host and target
patches let's add the hash and diffie-hellman ID length macros.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yunje Shin <ioerts@kookmin.ac.kr>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The Kingston OM3SGP42048K2-A00 (PCI ID 2646:502f) firmware has a race
condition when processing concurrent write zeroes and DSM (discard)
commands, causing spurious "LBA Out of Range" errors and IOMMU page
faults at address 0x0.
The issue is reliably triggered by running two concurrent mkfs commands
on different partitions of the same drive, which generates interleaved
write zeroes and discard operations.
Disable write zeroes for this device, matching the pattern used for
other Kingston OM* drives that have similar firmware issues.
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Keith Busch <kbusch@kernel.org>
The NVM Command Set Identify Controller data may report a non-zero
Write Zeroes Size Limit (wzsl). When present, nvme_init_non_mdts_limits()
unconditionally overrides max_zeroes_sectors from wzsl, even if
NVME_QUIRK_DISABLE_WRITE_ZEROES previously set it to zero.
This effectively re-enables write zeroes for devices that need it
disabled, defeating the quirk. Several Kingston OM* drives rely on
this quirk to avoid firmware issues with write zeroes commands.
Check for the quirk before applying the wzsl override.
Fixes: 5befc7c26e ("nvme: implement non-mdts command limits")
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Assisted-by: claude-opus-4-6-v1
Signed-off-by: Keith Busch <kbusch@kernel.org>
A block device with a very large discard_granularity queue limit may not
be able to report it in the 16-bit NPDG and NPDA fields in the Identify
Namespace data structure. For this reason, version 2.1 of the NVMe specs
added 32-bit fields NPDGL and NPDAL to the NVM Command Set Specific
Identify Namespace structure. So report the discard_granularity there
too and set OPTPERF to 11b to indicate those fields are supported.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Use the NVME_NS_FEAT_OPTPERF_SHIFT constant in nvmet_bdev_set_limits()
to set the OPTPERF bits of the nvme_id_ns NSFEAT field instead of the
magic number 4.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently, nvme_config_discard() always sets the discard_granularity
queue limit to the logical block size. However, NVMe namespaces can
advertise a larger preferred discard granularity in the NPDG or NPDA
field of the Identify Namespace structure or the NPDGL or NPDAL fields
of the I/O Command Set Specific Identify Namespace structure.
Use these fields to compute the discard_granularity limit. The logic is
somewhat involved. First, the fields are optional. NPDG is only reported
if the low bit of OPTPERF is set in NSFEAT. NPDA is reported if any bit
of OPTPERF is set. And NPDGL and NPDAL are reported if the high bit of
OPTPERF is set. NPDGL and NPDAL can also each be set to 0 to opt out of
reporting a limit. I/O Command Set Specific Identify Namespace may also
not be supported by older NVMe controllers. Another complication is that
multiple values may be reported among NPDG, NPDGL, NPDA, and NPDAL. The
spec says to prefer the values reported in the L variants. The spec says
NPDG should be a multiple of NPDA and NPDGL should be a multiple of
NPDAL, but it doesn't specify a relationship between NPDG and NPDAL or
NPDGL and NPDA. So use the maximum of the reported NPDG(L) and NPDA(L)
values as the discard_granularity.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The NVMe specifications are big fans of "0's based"/"0-based" fields for
encoding values that must be positive. The encoded value is 1 less than
the value it represents. nvmet already provides a helper to0based() for
encoding 0's based values, so add a corresponding helper to decode these
fields on the host side.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
