Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.2-rc5 that
resolve a number of tiny reported issues and some new device ids. They
include:
- new device id for the exar serial driver
- speakup tty driver bugfix
- atmel serial driver baudrate fixup
- stm32 serial driver bugfix and then revert as the bugfix broke the
build. That will come back in a later pull request once it is all
worked out properly.
- amba-pl011 serial driver rs486 mode bugfix
- qcom_geni serial driver bugfix
Most of these have been in linux-next with no reported problems (well,
other than the build breakage which generated the revert), the new
device id passed 0-day testing"
* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: exar: Add support for Sealevel 7xxxC serial cards
Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
tty: serial: qcom_geni: avoid duplicate struct member init
serial: atmel: fix incorrect baudrate setup
tty: fix possible null-ptr-defer in spk_ttyio_release
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
serial: amba-pl011: fix high priority character transmission in rs486 mode
serial: pch_uart: Pass correct sg to dma_unmap_sg()
tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of small USB and Thunderbolt driver fixes and new
device id changes for 6.2-rc5. Included in here are:
- thunderbolt bugfixes for reported problems
- new usb-serial driver ids added
- onboard_hub usb driver fixes for much-reported problems
- xhci bugfixes
- typec bugfixes
- ehci-fsl driver module alias fix
- iowarrior header size fix
- usb gadget driver fixes
All of these, except for the iowarrior fix, have been in linux-next
with no reported issues. The iowarrior fix passed the 0-day testing
and is a one digit change based on a reported problem in the driver
(which was written to a spec, not the real device that is now
available)"
* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
usb: host: ehci-fsl: Fix module alias
usb: dwc3: fix extcon dependency
usb: core: hub: disable autosuspend for TI TUSB8041
USB: fix misleading usb_set_intfdata() kernel doc
usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
USB: gadget: Add ID numbers to configfs-gadget driver names
usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
usb: gadget: g_webcam: Send color matching descriptor per frame
usb: typec: altmodes/displayport: Use proper macro for pin assignment check
usb: typec: altmodes/displayport: Fix pin assignment calculation
usb: typec: altmodes/displayport: Add pin assignment helper
usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
usb: misc: onboard_hub: Move 'attach' work to the driver
usb: misc: onboard_hub: Invert driver registration order
usb: ucsi: Ensure connector delayed work items are flushed
usb: musb: fix error return code in omap2430_probe()
usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
...
Pull Kbuild fixes from Masahiro Yamada:
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
messages when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: explicitly validate existence of cpio command
scripts: support GNU make 4.4 in jobserver-exec
kconfig: Update all declared targets
scripts: rpm: make clear that mkspec script contains 4.13 feature
init/Kconfig: fix LOCALVERSION_AUTO help text
kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
init/version-timestamp.c: remove unneeded #include <linux/version.h>
docs: kbuild: remove mention to dropped $(objtree) feature
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential race condition and always set GPIOs used as interrupt
source to input in gpio-mxc
- fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU
* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
Pull cifs fixes from Steve French:
- important fix for packet signature calculation error
- three fixes to correct DFS deadlock, and DFS refresh problem
- remove an unused DFS function, and duplicate tcon refresh code
- DFS cache lookup fix
- uninitialized rc fix
* tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: remove unused function
cifs: do not include page data when checking signature
cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()
cifs: handle cache lookup errors different than -ENOENT
cifs: remove duplicate code in __refresh_tcon()
cifs: don't take exclusive lock for updating target hints
cifs: avoid re-lookups in dfs_cache_find()
cifs: fix potential deadlock in cache_refresh_path()
Pull pin control fixes from Linus Walleij:
- Compilation fix for Sunplus sp7021
- Add some missing headers after a cleanup to the Nomadik driver
- Fix pull type and mux routes on Rockchip RK3568
* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: rockchip: fix mux route data for rk3568
pinctrl: rockchip: fix reading pull type on rk3568
pinctrl: nomadik: Add missing header(s)
pinctrl: sp7021: fix unused function warning
Pull rdma fixes from Jason Gunthorpe:
- Several hfi1 patches fixing some long standing driver bugs
- Overflow when working with sg lists with elements greater than 4G
- An rxe regression with object numbering after the mrs reach their
limit
- A theoretical problem with the scatterlist merging code
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
lib/scatterlist: Fix to calculate the last_pg properly
IB/hfi1: Remove user expected buffer invalidate race
IB/hfi1: Immediately remove invalid memory from hardware
IB/hfi1: Fix expected receive setup error exit issues
IB/hfi1: Reserve user expected TIDs
IB/hfi1: Reject a zero-length user expected buffer
RDMA/core: Fix ib block iterator counter overflow
RDMA/rxe: Prevent faulty rkey generation
RDMA/rxe: Fix inaccurate constants in rxe_type_info
Pull block fixes from Jens Axboe:
"Various little tweaks all over the place:
- NVMe pull request via Christoph:
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)
- Fix a bug in the read request side request allocation caching
(Pavel)
- pktcdvd was brought back after we configured a NULL return on bio
splits, make it consistent with the others (me)
- BFQ refcount fix (Yu)
- Block cgroup policy activation fix (Yu)
- Fix for an md regression introduced in the 6.2 cycle (Adrian)"
* tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
block: fix hctx checks for batch allocation
block/rnbd-clt: fix wrong max ID in ida_alloc_max
blk-cgroup: fix missing pd_online_fn() while activating policy
pktcdvd: check for NULL returna fter calling bio_split_to_limits()
block, bfq: switch 'bfqg->ref' to use atomic refcount apis
md: fix incorrect declaration about claim_rdev in md_import_device
Pull io_uring fixes from Jens Axboe:
"Fixes for the MSG_RING opcode. Nothing really major:
- Fix an overflow missing serialization around posting CQEs to the
target ring (me)
- Disable MSG_RING on a ring that isn't enabled yet. There's nothing
really wrong with allowing it, but 1) it's somewhat odd as nobody
can receive them yet, and 2) it means that using the right delivery
mechanism might change. As nobody should be sending CQEs to a ring
that isn't enabled yet, let's just disable it (Pavel)
- Tweak to when we decide to post remotely or not for MSG_RING
(Pavel)"
* tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux:
io_uring/msg_ring: fix remote queue to disabled ring
io_uring/msg_ring: fix flagging remote execution
io_uring/msg_ring: fix missing lock on overflow for IOPOLL
io_uring/msg_ring: move double lock/unlock helpers higher up
Pull btrfs fixes from David Sterba:
- fix potential out-of-bounds access to leaf data when seeking in an
inline file
- fix potential crash in quota when rescan races with disable
- reimplement super block signature scratching by marking page/folio
dirty and syncing block device, allow removing write_one_page
* tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between quota rescan and disable leading to NULL pointer deref
btrfs: fix invalid leaf access due to inline extent during lseek
btrfs: stop using write_one_page in btrfs_scratch_superblock
btrfs: factor out scratching of one regular super block
Pull Kselftest fix from Shuah Khan:
"Fix an error seen during unconfigured LLVM builds"
* tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: Fix error message for unconfigured LLVM builds
Pull thermal control fix from Rafael Wysocki:
"Modify __thermal_cooling_device_register() to make it call
put_device() after invoking device_register() and fix up a few error
paths calling thermal_cooling_device_destroy_sysfs() unnecessarily
(Viresh Kumar)"
* tag 'thermal-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: call put_device() only after device_register() fails
Pull ACPI fixes from Rafael Wysocki:
"These update the ACPICA entry in MAINTAINERS, add a backlight handling
quirk and fix the ACPI PRM (platform runtime) mechanism support.
Specifics:
- Update the ACPICA development list address in MAINTAINERS to the
new one that does not bounce (Rafael Wysocki)
- Check whether EFI runtime is available when registering the ACPI
PRM address space handler and when running it (Ard Biesheuvel)
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede)"
* tag 'acpi-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Check whether EFI runtime is available
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
MAINTAINERS: Update the ACPICA development list address
Pull MMC fixes from Ulf Hansson:
- sunxi-mmc: Fix clock refcount imbalance during unbind
- sdhci-esdhc-imx: Fix some tuning settings
* tag 'mmc-v6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sunxi-mmc: Fix clock refcount imbalance during unbind
mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting
Pull ARM SoC DT and driver fixes from Arnd Bergmann:
"Lots of dts fixes for Qualcomm Snapdragon and NXP i.MX platforms,
including:
- A regression fix for SDHCI controllers on Inforce 6540, and another
SDHCI fix on SM8350
- Reenable cluster idle on sm8250 after the the code fix is upstream
- multiple fixes for the QMP PHY binding, needing an incompatible dt
change
- The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus
6P, to avoid instabilities caused by use of protected memory
regions
- Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
clock error
- A couple of verdin-imx8mm DT fixes for audio playback support
- Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees
- Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
eMMC CMD8 CRC error in HS400ES/HS400 mode
The remaining ARM and RISC-V platforms only have very few smaller dts
bugfixes this time:
- A fix for the SiFive unmatched board's PCI memory space
- A revert to fix a regression with GPIO on Marvell Armada
- A fix for the UART address on Marvell AC5
- Missing chip-select phandles for stm32 boards
- Selecting the correct clock for the sam9x60 memory controller
- Amlogic based Odroid-HC4 needs a revert to restore USB
functionality.
And finally, there are some minor code fixes:
- Build fixes for OMAP1, pxa, riscpc, raspberry pi firmware, and zynq
firmware
- memory controller driver fixes for an OMAP regression and older
bugs on tegra, atmel and mvebu
- reset controller fixes for ti-sci and uniphier platforms
- ARM SCMI firmware fixes for a couple of rare corner cases
- Qualcomm platform driver fixes for incorrect error handling and a
backwards compatibility fix for the apr driver using older dtb
- NXP i.MX SoC driver fixes for HDMI output, error handling in the
imx8 soc-id and missing reference counting on older cpuid code"
* tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (60 commits)
firmware: zynqmp: fix declarations for gcc-13
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60
ARM: omap1: fix building gpio15xx
ARM: omap1: fix !ARCH_OMAP1_ANY link failures
firmware: raspberrypi: Fix type assignment
arm64: dts: qcom: msm8992-libra: Fix the memory map
arm64: dts: qcom: msm8992: Don't use sfpb mutex
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
arm64: dts: msm8994-angler: fix the memory map
arm64: dts: marvell: AC5/AC5X: Fix address for UART1
ARM: footbridge: drop unnecessary inclusion
Revert "ARM: dts: armada-39x: Fix compatible string for gpios"
Revert "ARM: dts: armada-38x: Fix compatible string for gpios"
ARM: pxa: enable PXA310/PXA320 for DT-only build
riscv: dts: sifive: fu740: fix size of pcie 32bit memory
soc: qcom: apr: Make qcom,protection-domain optional again
...
Pull dmaengine fixes from Vinod Koul:
- email address Update for Jie Hai
- fix double increment of client_count in dma_chan_get()
- idxd driver fixes: use after free, probe error handling and callback
on wq disable
- fix for qcom gpi driver GO tre
- ptdma locking fix
- tegra & imx-sdma mem leak fix
* tag 'dmaengine-fix-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
ptdma: pt_core_execute_cmd() should use spinlock
dmaengine: tegra: Fix memory leak in terminate_all()
dmaengine: xilinx_dma: call of_node_put() when breaking out of for_each_child_of_node()
dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init
dmaengine: Fix double increment of client_count in dma_chan_get()
dmaengine: tegra210-adma: fix global intr clear
Add exception protection processing for vd in axi_chan_handle_err function
dmaengine: lgm: Move DT parsing after initialization
MAINTAINERS: update Jie Hai's email address
dmaengine: ti: k3-udma: Do conditional decrement of UDMA_CHAN_RT_PEER_BCNT_REG
dmaengine: idxd: Do not call DMX TX callbacks during workqueue disable
dmaengine: idxd: Prevent use after free on completion memory
dmaengine: idxd: Let probe fail when workqueue cannot be enabled
dmaengine: qcom: gpi: Set link_rx bit on GO TRE for rx operation
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bluetooth, bpf and netfilter.
Current release - regressions:
- Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
addrconf", fix nsna_ping mode of team
- wifi: mt76: fix bugs in Rx queue handling and DMA mapping
- eth: mlx5:
- add missing mutex_unlock in error reporter
- protect global IPsec ASO with a lock
Current release - new code bugs:
- rxrpc: fix wrong error return in rxrpc_connect_call()
Previous releases - regressions:
- bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2
- wifi:
- mac80211: fix crashes on Rx due to incorrect initialization of
rx->link and rx->link_sta
- mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
aggregation handling, crashes
- brcmfmac: fix regression for Broadcom PCIe wifi devices
- rndis_wlan: prevent buffer overflow in rndis_query_oid
- netfilter: conntrack: handle tcp challenge acks during connection
reuse
- sched: avoid grafting on htb_destroy_class_offload when destroying
- virtio-net: correctly enable callback during start_xmit, fix stalls
- tcp: avoid the lookup process failing to get sk in ehash table
- ipa: disable ipa interrupt during suspend
- eth: stmmac: enable all safety features by default
Previous releases - always broken:
- bpf:
- fix pointer-leak due to insufficient speculative store bypass
mitigation (Spectre v4)
- skip task with pid=1 in send_signal_common() to avoid a splat
- fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events
- fix potential deadlock in htab_lock_bucket from same bucket
index but different map_locked index
- bluetooth:
- fix a buffer overflow in mgmt_mesh_add()
- hci_qca: fix driver shutdown on closed serdev
- ISO: fix possible circular locking dependency
- CIS: hci_event: fix invalid wait context
- wifi: brcmfmac: fixes for survey dump handling
- mptcp: explicitly specify sock family at subflow creation time
- netfilter: nft_payload: incorrect arithmetics when fetching VLAN
header bits
- tcp: fix rate_app_limited to default to 1
- l2tp: close all race conditions in l2tp_tunnel_register()
- eth: mlx5: fixes for QoS config and eswitch configuration
- eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
- eth: stmmac: fix invalid call to mdiobus_get_phy()
Misc:
- ethtool: add netlink attr in rss get reply only if the value is not
empty"
* tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
Revert "Merge branch 'octeontx2-af-CPT'"
tcp: fix rate_app_limited to default to 1
bnxt: Do not read past the end of test names
net: stmmac: enable all safety features by default
octeontx2-af: add mbox to return CPT_AF_FLT_INT info
octeontx2-af: update cpt lf alloc mailbox
octeontx2-af: restore rxc conf after teardown sequence
octeontx2-af: optimize cpt pf identification
octeontx2-af: modify FLR sequence for CPT
octeontx2-af: add mbox for CPT LF reset
octeontx2-af: recover CPT engine when it gets fault
net: dsa: microchip: ksz9477: port map correction in ALU table entry register
selftests/net: toeplitz: fix race on tpacket_v3 block close
net/ulp: use consistent error code when blocking ULP
octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
tcp: avoid the lookup process failing to get sk in ehash table
Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"
MAINTAINERS: add networking entries for Willem
net: sched: gred: prevent races when adding offloads to stats
l2tp: prevent lockdep issue in l2tp_tunnel_register()
...
Merge an ACPI PRM (platform runtime) support fix and an ACPI backlight
quirk for 6.2-rc5:
- Check whether EFI runtime is available when registering the ACPI PRM
address space handler and when running it (Ard Biesheuvel).
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede).
* acpi-prm:
ACPI: PRM: Check whether EFI runtime is available
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
IORING_SETUP_R_DISABLED rings don't have the submitter task set, so
it's not always safe to use ->submitter_task. Disallow posting msg_ring
messaged to disabled rings. Also add task NULL check for loosy sync
around testing for IORING_SETUP_R_DISABLED.
Cc: stable@vger.kernel.org
Fixes: 6d043ee116 ("io_uring: do msg_ring in target task via tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a couple of problems with queueing a tw in io_msg_ring_data()
for remote execution. First, once we queue it the target ring can
go away and so setting IORING_SQ_TASKRUN there is not safe. Secondly,
the userspace might not expect IORING_SQ_TASKRUN.
Extract a helper and uniformly use TWA_SIGNAL without TWA_SIGNAL_NO_IPI
tricks for now, just as it was done in the original patch.
Cc: stable@vger.kernel.org
Fixes: 6d043ee116 ("io_uring: do msg_ring in target task via tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit b4fbf0b27f, reversing
changes made to 6c977c5c2e.
This seems like net-next material.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)"
* tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.
Fixes: eb8329e0a0 ("tcp: export data delivery rate")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc-13.0.1 reports a type mismatch for two functions:
drivers/firmware/xilinx/zynqmp.c:1228:5: error: conflicting types for 'zynqmp_pm_set_rpu_mode' due to enum/integer mismatch; have 'int(u32, enum rpu_oper_mode)' {aka 'int(unsigned int, enum rpu_oper_mode)'} [-Werror=enum-int-mismatch]
1228 | int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode)
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/firmware/xilinx/zynqmp.c:25:
include/linux/firmware/xlnx-zynqmp.h:552:5: note: previous declaration of 'zynqmp_pm_set_rpu_mode' with type 'int(u32, u32)' {aka 'int(unsigned int, unsigned int)'}
552 | int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1);
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/firmware/xilinx/zynqmp.c:1246:5: error: conflicting types for 'zynqmp_pm_set_tcm_config' due to enum/integer mismatch; have 'int(u32, enum rpu_tcm_comb)' {aka 'int(unsigned int, enum rpu_tcm_comb)'} [-Werror=enum-int-mismatch]
1246 | int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode)
| ^~~~~~~~~~~~~~~~~~~~~~~~
include/linux/firmware/xlnx-zynqmp.h:553:5: note: previous declaration of 'zynqmp_pm_set_tcm_config' with type 'int(u32, u32)' {aka 'int(unsigned int, unsigned int)'}
553 | int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1);
| ^~~~~~~~~~~~~~~~~~~~~~~~
Change the declaration in the header to match the function definition.
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the original implementation of dwmac5
commit 8bf993a587 ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dcdf ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
[ 7.933303] Call trace:
[ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac]
[ 7.941455] __stmmac_open+0x16c/0x474 [stmmac]
[ 7.946117] stmmac_open+0x38/0x70 [stmmac]
[ 7.950414] __dev_open+0x100/0x1dc
[ 7.954006] __dev_change_flags+0x18c/0x204
[ 7.958297] dev_change_flags+0x24/0x6c
[ 7.962237] do_setlink+0x2b8/0xfa4
[ 7.965827] __rtnl_newlink+0x4ec/0x840
[ 7.969766] rtnl_newlink+0x50/0x80
[ 7.973353] rtnetlink_rcv_msg+0x12c/0x374
[ 7.977557] netlink_rcv_skb+0x5c/0x130
[ 7.981500] rtnetlink_rcv+0x18/0x2c
[ 7.985172] netlink_unicast+0x2e8/0x340
[ 7.989197] netlink_sendmsg+0x1a8/0x420
[ 7.993222] ____sys_sendmsg+0x218/0x280
[ 7.997249] ___sys_sendmsg+0xac/0x100
[ 8.001103] __sys_sendmsg+0x84/0xe0
[ 8.004776] __arm64_sys_sendmsg+0x24/0x30
[ 8.008983] invoke_syscall+0x48/0x114
[ 8.012840] el0_svc_common.constprop.0+0xcc/0xec
[ 8.017665] do_el0_svc+0x38/0xb0
[ 8.021071] el0_svc+0x2c/0x84
[ 8.024212] el0t_64_sync_handler+0xf4/0x120
[ 8.028598] el0t_64_sync+0x190/0x194
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.
Fixes: 5ac712dcdf ("net: stmmac: enable platform specific safety features")
Reported-by: Ning Cai <ncai@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa says:
====================
octeontx2-af: Miscellaneous changes for CPT
This patchset consists of miscellaneous changes for CPT.
- Adds a new mailbox to reset the requested CPT LF.
- Modify FLR sequence as per HW team suggested.
- Adds support to recover CPT engines when they gets fault.
- Updates CPT inbound inline IPsec configuration mailbox,
as per new generation of the OcteonTX2 chips.
- Adds a new mailbox to return CPT FLT Interrupt info.
---
v2:
- Addressed a review comment.
v1:
- Dropped patch "octeontx2-af: Fix interrupt name strings completely"
to submit to net.
---
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CN10K CPT coprocessor contains a context processor
to accelerate updates to the IPsec security association
contexts. The context processor contains a context cache.
This patch updates CPT LF ALLOC mailbox to config ctx_ilen
requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of
initial context fetch.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CN10K CPT coprocessor includes a component named RXC which
is responsible for reassembly of inner IP packets. RXC has
the feature to evict oldest entries based on age/threshold.
The age/threshold is being set to minimum values to evict
all entries at the time of teardown.
This patch adds code to restore timeout and threshold config
after teardown sequence is complete as it is global config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Optimize CPT PF identification in mbox handling for faster
mbox response by doing it at AF driver probe instead of
every mbox message.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CPT engine has uncorrectable errors, it will get halted and
must be disabled and re-enabled. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Prevent reading into undefined memory in the expression lexer,
accounting for a trailer backslash followed by the null byte.
- Fix file mode when copying files to the build id cache, the problem
happens when the cache directory is in a different file system than
the file being cached, otherwise the mode was preserved as only a
hard link would be done to save space.
- Fix a related build-id 'perf test' entry that checked that permission
when caching PE (Portable Executable) files, used when profiling
Windows executables under wine.
- Sync the tools/ copies of kvm headers, build_bug.h, socket.h and
arm64's cputype.h with the kernel sources.
* tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test build-id: Fix test check for PE file
perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache
perf expr: Prevent normalize() from reading into undefined memory in the expression lexer
tools headers: Syncronize linux/build_bug.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools kvm headers arm64: Update KVM header from the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
Pull printk fixes from Petr Mladek:
- Prevent a potential deadlock when configuring kgdb console
- Fix a kernel doc warning
* tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
kernel/printk/printk.c: Fix W=1 kernel-doc warning
tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
Pull s390 build fix from Heiko Carstens:
- Workaround invalid gcc-11 out of bounds read warning caused by s390's
S390_lowcore definition. This happens only with gcc 11.1.0 and
11.2.0.
The code which causes this warning will be gone with the next merge
window. Therefore just replace the memcpy() with a for loop to get
rid of the warning.
* tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: workaround invalid gcc-11 out of bounds read warning
