Generic PHY provides init/shutdown callbacks which allow USB-host drivers
to abstract PHY's hardware management in a common way. This change allows
to remove Tegra-specific PHY handling from the ChipIdea driver.
Note that ChipIdea's driver shall be changed at the same time because it
turns PHY ON without the PHY's initialization and this doesn't work now,
resulting in a NULL dereference of phy->freq because it's set during of
the PHY's initialization.
Acked-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106013416.9604-6-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PHY driver should keep track of the enable state, otherwise enable
refcount is screwed if USB driver tries to enable PHY when it is already
enabled. This will be the case for ChipIdea and Tegra EHCI drivers once
PHY driver will gain support for the init/shutdown callbacks.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106013416.9604-5-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I found that PHY's enable refcounting was broken and after fixing it
I also found that machine started to hang after EHCI driver module
removal. Turned out that the teardown order is incorrect because HCD must
be unregistered *before* PHY's disabling. Note that it is also not correct
to assert the shared reset during of driver's removal because PHY takes
care of resetting shared pads and thus it's better to remove that part
from the EHCI driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200106013416.9604-3-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.
"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names. Therefore they should be written with lowercase letters starting
with capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200104152107.11407-9-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Passing all the details that the alternate mode drivers
provide to the mux drivers during mode changes.
The mux drivers will in practice need to be able to make
decisions on their own. It is not enough that they get only
the requested port state. With the Thunderbolt 3 alternate
mode for example the mux driver will need to consider also
the capabilities of the cable before configuring the mux.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191230142611.24921-13-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Version 2.0 of the USB Power Delivery Specification R3.0
defines a new message called Enter_USB, which is made with
USB4 in mind. Enter_USB message is in practice the same as
the Enter Mode command (used when entering alternate modes)
that just needs to be used when entering USB4 mode.
The message does also support entering USB 2.0 or USB 3.2
mode instead of USB4 mode, but it is only required with
USB4. I.e. with USB2 and USB3 Enter_USB message is optional.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191230142611.24921-9-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Originally the port drivers were expected to check does the
connector have the mode enabled or disabled when the alt
mode drivers attempted to enter the mode, but since
typec_altmode_enter() puts the connector into USB Safe
State before calling the port driver, it really has to do
the check on its own, and before changing the state.
Otherwise the connector may be left in USB Safe State if the
port driver does not move it back to normal USB operation
when the mode is disabled.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191230142611.24921-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc -O3 warns about correct code:
inlined from 'oxu_hub_control.constprop' at drivers/usb/host/oxu210hp-hcd.c:3652:3:
include/linux/string.h:411:9: error: argument 1 null where non-null expected [-Werror=nonnull]
return __builtin_memset(p, c, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/host/oxu210hp-hcd.c: In function 'oxu_hub_control.constprop':
include/linux/string.h:411:9: note: in a call to built-in function '__builtin_memset'
Expand the code slightly to let gcc better understand it and
not warn any more.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107214354.1008937-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB_OCTEON_EHCI is deprecated and only selects proper driver so
there is no need to compile test it. Since it selects
USB_EHCI_BIG_ENDIAN_MMIO it causes compilation failures on certain big
endian architectures (e.g. m68k):
In file included from drivers/usb/host/ehci-mxc.c:19:0:
drivers/usb/host/ehci.h: In function ‘ehci_readl’:
drivers/usb/host/ehci.h:743:3: error:
implicit declaration of function ‘readl_be’ [-Werror=implicit-function-declaration]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/1577778392-570-1-git-send-email-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This converts the USB3503 to pick GPIO descriptors from the
device tree instead of iteratively picking out GPIO number
references and then referencing these from the global GPIO
numberspace.
The USB3503 is only used from device tree among the in-tree
platforms. If board files would still desire to use it they can
provide machine descriptor tables.
Make sure to preserve semantics such as the reset delay
introduced by Stefan.
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[mszyprow: invert the logic behind reset GPIO line]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20191211145226.25074-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current USB3503 driver ignores GPIO polarity and always operates as if the
GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing
USB3503 chip applications to match the chip specification and common
convention for naming the pins. The only pin, which has to be ACTIVE_LOW
is the reset pin. The remaining are ACTIVE_HIGH. This change allows later
to fix the USB3503 driver to properly use generic GPIO bindings and read
polarity from DT.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191211145208.24976-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CCGx controller used on NVIDIA GPU card has two separate display
altmode for two DP pin assignments. UCSI specification doesn't
prohibits using separate display altmode.
Current UCSI Type-C framework expects only one display altmode for
all DP pin assignment. This patch squashes two separate display
altmode into single altmode to support controllers with separate
display altmode. We first read all the alternate modes of connector
and then run through it to know if there are separate display
altmodes. If so, it prepares a new port altmode set after squashing
two or more separate altmodes into one.
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191230133431.63445-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver needs to ignore any Connector Change Events
before the Connector Change Indication notifications have
actually been enabled. This adds a check to
ucsi_connector_change() function to make sure the function
does not try to process the event unless the Connector
Change notifications have been enabled.
It is quite common that the firmware representing the "PPM"
(Platform Policy Manager) starts generating Connector Change
notifications even when only the Command Completion
notifications are enabled.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191230133431.63445-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mtk-xhci platform glue sets the DMA mask to 32 bits on its own,
which was needed before commit fda182d80a ("usb: xhci: configure
32-bit DMA if the controller does not support 64-bit DMA"), but now it
has no effect, because xhci_gen_setup() sets it up for us according to
hardware capabilities. Remove the useless code.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20191219093954.163417-1-tfiga@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
