- Use DEFINE_SIMPLE_DEV_PM_OPS() instead of the SIMPLE_DEV_PM_OPS()
macro. This makes it possible to remove the __maybe_unused flags on
the callback functions.
- Since we only have callbacks for suspend/resume, we can conditionally
compile the dev_pm_ops structure for when CONFIG_PM_SLEEP is enabled;
so use the pm_sleep_ptr() macro instead of pm_ptr().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708205406.96473-7-paul@crapouillou.net
As Rn covers single-channel formats with a direct relationship between
channel value and brightness, and Cn can be any colors, there are
currently no fourcc codes to describe single-channel formats with an
inverse relationship between channel value and brightness.
Introduce fourcc codes for a single-channel frame buffer format with
two, four, sixteen, or 256 brightness ("darkness") levels, where there
is an inverse relationship between channel value and brightness.
As the number of bits per pixel may be less than eight, some of these
formats rely on proper block handling for the calculation of bits per
pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for grayscale (2, 4, and 16 levels) images in
the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
bilevel and grayscale (16 levels) images in the TIFF 6.0 Specification,
and is also used for monochrome images in the PBM file format,
monochrome Linux frame buffer logos, and BDF and PSF (Linux kernel) font
files.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6119f3abeda9baaa88652843960adc032da276b4.1657294931.git.geert@linux-m68k.org
Introduce fourcc codes for single-channel frame buffer formats with two,
four, and sixteen brightness levels, where there is a direct
relationship between channel value and brightness.
As the number of bits per pixel is less than eight, these rely on proper
block handling for the calculation of bits per pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for grayscale (2, 4, and 16 levels) images in
the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
bilevel and grayscale (16 levels) images in the TIFF 6.0 Specification,
and is also used for monochrome images in the PBM file format,
monochrome Linux frame buffer logos, and BDF and PSF (Linux kernel) font
files.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/96561a88e53c59cac72e66642bf4c097aacefd18.1657294931.git.geert@linux-m68k.org
Add support for color-indexed frame buffer formats with two, four, and
sixteen colors to the DRM framebuffer helper functions:
1. Add support for 1, 2, and 4 bits per pixel to the damage helper,
2. For color-indexed modes, the length of the color bitfields must be
set to the color depth, else the logo code may pick a logo with too
many colors. Drop the incorrect DAC width comment, which
originates from the i915 driver.
3. Accept C[124] modes when validating or filling in struct
fb_var_screeninfo, and use the correct number of bits per pixel.
4. Set the visual to FB_VISUAL_PSEUDOCOLOR for all color-indexed
modes.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/db3e80b445df661ff0cd7e698507a8d24a4c867e.1657294931.git.geert@linux-m68k.org
Introduce fourcc codes for color-indexed frame buffer formats with two,
four, and sixteen colors, and provide a mapping from bits per pixel and
depth to fourcc codes.
As the number of bits per pixel is less than eight, these rely on proper
block handling for the calculation of bits per pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for indexed-color (2, 4, and 16 colors) images
in the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
palette-color (16 colors) images in the TIFF 6.0 Specification, and is
also used for 16-color Linux frame buffer logos.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/3d88ca7ad32ff3ff3469c10f0b36c312ea233a33.1657294931.git.geert@linux-m68k.org
This code works, but technically it uses "num_in_bus_fmts" before it
has been initialized so it leads to static checker warnings and probably
KMEMsan warnings at run time. Initialize the variable to zero to
silence the warning.
Fixes: f32df58acc ("drm/bridge: Add the necessary bits to support bus format negotiation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/YrrIs3hoGcPVmXc5@kili
Allwinner display drivers are split roughly into two generations. The
first generation was found on early 32-bit ARM SoCs and contains DE1.0
and a custom HDMI controller. Clarify that these options only apply to
a specific list of SoCs, and limit selecting them to 32-bit ARM, to
avoid confusion.
The second generation, found in A83T and newer SoCs (both 32-bit and
64-bit), contains a DE2.0 and a DesignWare HDMI controller. Since this
is the most widely-used generation, enable it by default. The previous
default condition (MACH_SUN8I) was limited to 32-bit SoCs. Also enable
the DSI controller by default, which is found on 64-bit SoCs as well.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220702193250.52959-1-samuel@sholland.org
The current code tries to handle the case where CONFIG_PM isn't selected
by first calling our runtime_resume implementation and then properly
report the power state to the runtime_pm core.
This allows to have a functionning device even if pm_runtime_get_*
functions are nops.
However, the device power state if CONFIG_PM is enabled is
RPM_SUSPENDED, and thus our vc4_hdmi_write() and vc4_hdmi_read() calls
in the runtime_pm hooks will now report a warning since the device might
not be properly powered.
Even more so, we need CONFIG_PM enabled since the previous RaspberryPi
have a power domain that needs to be powered up for the HDMI controller
to be usable.
The previous patch has created a dependency on CONFIG_PM, now we can
just assume it's there and only call pm_runtime_resume_and_get() to make
sure our device is powered in bind.
Link: https://lore.kernel.org/r/20220629123510.1915022-39-maxime@cerno.tech
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and
free the memory.Thus, when nouveau_bo_init() returns an error, the gem
object has already been released. Then the call to nouveau_bo_ref() will
use the freed "nvbo->bo" and lead to a use-after-free bug.
We should delete the call to nouveau_bo_ref() to avoid the use-after-free.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 019cbd4a4f ("drm/nouveau: Initialize GEM object before TTM object")
Cc: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://patchwork.freedesktop.org/patch/msgid/20220705132546.2247677-1-niejianglei2021@163.com
cec_unregister_adapter() assumes that the underlying adapter ops are
callable. For example, if the CEC adapter currently has a valid physical
address, then the unregistration procedure will invalidate the physical
address by setting it to f.f.f.f. Whence the following kernel oops
observed after removing the adv7511 module:
Unable to handle kernel execution of user memory at virtual address 0000000000000000
Internal error: Oops: 86000004 [#1] PREEMPT_RT SMP
Call trace:
0x0
adv7511_cec_adap_log_addr+0x1ac/0x1c8 [adv7511]
cec_adap_unconfigure+0x44/0x90 [cec]
__cec_s_phys_addr.part.0+0x68/0x230 [cec]
__cec_s_phys_addr+0x40/0x50 [cec]
cec_unregister_adapter+0xb4/0x118 [cec]
adv7511_remove+0x60/0x90 [adv7511]
i2c_device_remove+0x34/0xe0
device_release_driver_internal+0x114/0x1f0
driver_detach+0x54/0xe0
bus_remove_driver+0x60/0xd8
driver_unregister+0x34/0x60
i2c_del_driver+0x2c/0x68
adv7511_exit+0x1c/0x67c [adv7511]
__arm64_sys_delete_module+0x154/0x288
invoke_syscall+0x48/0x100
el0_svc_common.constprop.0+0x48/0xe8
do_el0_svc+0x28/0x88
el0_svc+0x1c/0x50
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x15c/0x160
Code: bad PC value
---[ end trace 0000000000000000 ]---
Protect against this scenario by unregistering i2c_cec after
unregistering the CEC adapter. Duly disable the CEC clock afterwards
too.
Fixes: 3b1b975003 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-3-alvin@pqrs.dk
