Merge series from Boerge Struempfel <boerge.struempfel@gmail.com>:
Some spi controller switch the mosi line to high, whenever they are
idle. This may not be desired in all use cases. For example neopixel
leds can get confused and flicker due to misinterpreting the idle state.
Therefore, we introduce a new spi-mode bit, with which the idle behaviour
can be overwritten on a per device basis.
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
Hello,
compared to (implicit) v1 sent in March with Message-Id:
<20230309094704.2568531-1-u.kleine-koenig@pengutronix.de>, I reworked
patch 1 on feedback by AngeloGioacchino Del Regno. Patches 2 and 3 got
his Reviewed-by.
Best regards
Uwe
Uwe Kleine-König (3):
spi: mt65xx: Properly handle failures in .remove()
spi: mt65xx: Convert to platform remove callback returning void
spi: mt65xx: Don't disguise a "return 0" as "return ret"
drivers/spi/spi-mt65xx.c | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)
base-commit: ac9a78681b
--
2.39.2
In order to increase usability, the command line options are sorted into
logical groups. In addition, the usage string was sorted alphabetically,
and the missing parameters '8','i' and 'o' were added. Furthermore, the
option descriptions were moved further to the right, in order to allow
for longer option names.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-5-boerge.struempfel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By default, the spi-imx controller pulls the mosi line high, whenever it
is idle. This behaviour can be inverted per CS by setting the
corresponding DATA_CTL bit in the config register of the controller.
Also, since the controller mode-bits have to be touched anyways, the
SPI_CPOL and SPI_CPHA are replaced by the combined SPI_MODE_X_MASK flag.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-3-boerge.struempfel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some spi controller switch the mosi line to high, whenever they are
idle. This may not be desired in all use cases. For example neopixel
leds can get confused and flicker due to misinterpreting the idle state.
Therefore, we introduce a new spi-mode bit, with which the idle behaviour
can be overwritten on a per device basis.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-2-boerge.struempfel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230530081648.2199419-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
It is usually better to request all necessary resources (clocks,
regulators, ...) before starting to make use of them. That way they do
not change state in case one of the resources is not available yet and
probe deferral (-EPROBE_DEFER) is necessary. This is particularly
important for DMA channels and IOMMUs which are not enforced by
fw_devlink yet (unless you use fw_devlink.strict=1).
spi-qup does this in the wrong order, the clocks are enabled and
disabled again when the DMA channels are not available yet.
This causes issues in some cases: On most SoCs one of the SPI QUP
clocks is shared with the UART controller. When using earlycon UART is
actively used during boot but might not have probed yet, usually for
the same reason (waiting for the DMA controller). In this case, the
brief enable/disable cycle ends up gating the clock and further UART
console output will halt the system completely.
Avoid this by requesting the DMA channels before changing the clock
state.
Fixes: 612762e82a ("spi: qup: Add DMA capabilities")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230518-spi-qup-clk-defer-v1-1-f49fc9ca4e02@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The ecspi IP block on imx51/imx53/imx6 have four native chip
selects. Tell that to the spi core so that any non-gpio chip selects
get validated against that upper bound.
Also set the SPI_MASTER_GPIO_SS so that the core verifies that, in the
case where both native and gpio chip selects are in use, there is at
least one leftover native chip select (or "channel", in the ecspi
language) for use by the slaves sitting on gpio chip selects.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20230425134527.483607-3-linux@rasmusvillemoes.dk
Signed-off-by: Mark Brown <broonie@kernel.org>
When working in slave mode it seems the timing is exceedingly tight.
The TX FIFO can never empty, because the master is driving the clock so
zeros would be sent for those bytes where the FIFO is empty.
Return to interleaving the writing of the TX FIFO and the reading
of the RX FIFO to try to ensure the data is available when required.
Fixes: a84c11e16d ("spi: spi-cadence: Avoid read of RX FIFO before its ready")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230518093927.711358-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull UML fix from Richard Weinberger:
- Fix modular build for UML watchdog
* tag 'uml-for-linus-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: harddog: fix modular build
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Plug a race in the stage-2 mapping code where the IPA and the PA
would end up being out of sync
- Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)
- FP/SVE/SME documentation update, in the hope that this field
becomes clearer...
- Add workaround for Apple SEIS brokenness to a new SoC
- Random comment fixes
x86:
- add MSR_IA32_TSX_CTRL into msrs_to_save
- fixes for XCR0 handling in SGX enclaves
Generic:
- Fix vcpu_array[0] races
- Fix race between starting a VM and 'reboot -f'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)
KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
KVM: Fix vcpu_array[0] races
KVM: VMX: Fix header file dependency of asm/vmx.h
KVM: Don't enable hardware after a restart/shutdown is initiated
KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown
KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations
KVM: arm64: Clarify host SME state management
KVM: arm64: Restructure check for SVE support in FP trap handler
KVM: arm64: Document check for TIF_FOREIGN_FPSTATE
KVM: arm64: Fix repeated words in comments
KVM: arm64: Constify start/end/phys fields of the pgtable walker data
KVM: arm64: Infer PA offset from VA in hyp map walker
KVM: arm64: Infer the PA offset from IPA in stage-2 map walker
KVM: arm64: Use the bitmap API to allocate bitmaps
KVM: arm64: Slightly optimize flush_context()
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't
available
- Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf
'runqueue' type verification. This feature is built only with
BUILD_BPF_SKEL=1
- Make vmlinux.h use bpf.h and perf_event.h in source directory, not
system ones that may be old and not have things like 'union
perf_sample_weight'
- Add system include paths to BPF builds to pick things missing in the
headers included by clang -target bpf
- Update various header copies with the kernel sources
- Change divide by zero and not supported events behavior to show
'nan'/'not counted' in 'perf stat' output.
This happens when using things like 'perf stat -M TopdownL2 true',
involving JSON metrics
- Update no event/metric expectations affected by using JSON metrics in
'perf stat -ddd' perf test
- Avoid segv with 'perf stat --topdown' for metrics without a group
- Do not assume which events may have a PMU name, allowing the logic to
keep an AUX event group together. Makes this usecase work again:
$ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.078 MB perf.data ]
$ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown]
sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown]
sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown]
- Add a check for the above use case in 'perf test test_intel_pt'
- Fix build with refcount checking on arm64, it was still accessing
fields that need to be wrapped so that the refcounted struct gets
checked
- Fix contextid validation in ARM's CS-ETM, so that older kernels
without that field can still be supported
- Skip unsupported aggregation for stat events found in perf.data files
in 'perf script'
- Add stat test for record and script to check the previous problem
- Remove needless debuginfod queries from 'perf test java symbol', this
was just making the test take a long time to complete
- Address python SafeConfigParser() deprecation warning in 'perf test
attr'
- Fix __NR_execve undeclared on i386 'perf bench syscall' build error
* tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits)
perf bench syscall: Fix __NR_execve undeclared build error
perf test attr: Fix python SafeConfigParser() deprecation warning
perf test attr: Update no event/metric expectations
tools headers disabled-features: Sync with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf metrics: Avoid segv with --topdown for metrics without a group
perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification
perf cs-etm: Fix contextid validation
perf arm64: Fix build with refcount checking
perf test: Add stat test for record and script
perf script: Skip aggregation for stat events
perf build: Add system include paths to BPF builds
perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory
perf parse-events: Do not break up AUX event group
perf test test_intel_pt.sh: Test sample mode with event with PMU name
perf evsel: Modify group pmu name for software events
...
Pull powerpc fixes from Michael Ellerman:
- Fix broken soft dirty tracking when using the Radix MMU (>= P9)
- Fix ISA mapping when "ranges" property is not present, for PASemi
Nemo boards
- Fix a possible WARN_ON_ONCE hitting in BPF extable handling
- Fix incorrect DMA address handling when using 2MB TCEs
- Fix a bug in IOMMU table handling for SR-IOV devices
- Fix the recent rework of IOMMU handling which left arch code calling
clean up routines that are handled by the IOMMU core
- A few assorted build fixes
Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini,
Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali
Rohár, Randy Dunlap, and Rob Herring.
* tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device
powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs
powerpc/iommu: Remove iommu_del_device()
powerpc/crypto: Fix aes-gcm-p10 build when VSX=n
powerpc/bpf: populate extable entries only during the last pass
powerpc/boot: Disable power10 features after BOOTAFLAGS assignment
powerpc/64s/radix: Fix soft dirty tracking
powerpc/fsl_uli1575: fix kconfig warnings and build errors
powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present
Pull ata fix from Damien Le Moal:
- Fix DT binding for the ahci-ceva driver to fully describe all iommus,
from Michal
* tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries
Pull fbdev fixes from Helge Deller:
"A few small unspectacular fbdev fixes:
- Fix for USB endpoint check in udlfb (found by syzbot fuzzer)
- Small fix in error code path in omapfb
- compiler warning fixes in fbmem & i810
- code removal and whitespace cleanups in stifb and atyfb"
* tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: stifb: Whitespace cleanups
fbdev: udlfb: Use usb_control_msg_send()
fbdev: udlfb: Fix endpoint check
fbdev: atyfb: Remove unused clock determination
fbdev: i810: include i810_main.h in i810_dvt.c
fbdev: fbmem: mark get_fb_unmapped_area() static
fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
Pull ksmbd server fixes from Steve French:
- two fixes for incorrect SMB3 message validation (one for client which
uses 8 byte padding, and one for empty bcc)
- two fixes for out of bounds bugs: one for username offset checks (in
session setup) and the other for create context name length checks in
open requests
* tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: smb2: Allow messages padded to 8byte boundary
ksmbd: allocate one more byte for implied bcc[0]
ksmbd: fix wrong UserName check in session_user
ksmbd: fix global-out-of-bounds in smb2_find_context_vals
Pull cifs client fixes from Steve French:
"Two smb3 client fixes, both related to deferred close, and also for
stable:
- send close for deferred handles before not after lease break
response to avoid possible sharing violations
- check all opens on an inode (looking for deferred handles) when
lease break is returned not just the handle the lease break came in
on"
* tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: drop reference to cfile before sending oplock break
SMB3: Close all deferred handles of inode in case of handle lease break
Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to
save/restore the register value during migration. Missing this may cause
userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the
value to the target VM.
In addition, there is no need to add MSR_IA32_TSX_CTRL when
ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So
add the checking in kvm_probe_msr_to_save().
Fixes: c11f83e062 ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20230509032348.1153070-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the
allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's
allowed XCR0 when emulating ECREATE.
Note, this could theoretically break a setup where userspace advertises
a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU
is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID
XFRM subleaf based on the guest's XCR0.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly check the vCPU's supported XCR0 when determining whether or not
the XFRM for ECREATE is valid. Checking CPUID works because KVM updates
guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed
XCR0, but that is rather subtle and KVM should not modify guest CPUID
except for modeling true runtime behavior (allowed XFRM is most definitely
not "runtime" behavior).
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the newly introduced usb_control_msg_send() instead of usb_control_msg()
when selecting the channel.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.4-rc3 to resolve
some reported problems, and add some new device ids. These include:
- termios documentation updates
- vc_screen use-after-free fix
- memory leak fix in arc_uart driver
- new 8250 driver ids
- other small serial driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
serial: qcom-geni: fix enabling deactivated interrupt
serial: 8250_bcm7271: fix leak in `brcmuart_probe`
serial: 8250_bcm7271: balance clk_enable calls
serial: arc_uart: fix of_iomap leak in `arc_serial_probe`
serial: 8250: Document termios parameter of serial8250_em485_config()
serial: Add support for Advantech PCI-1611U card
serial: 8250_exar: Add support for USR298x PCI Modems
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB fixes for 6.4-rc3, as well as a driver core fix that
resolves a memory leak that shows up in USB devices easier than other
subsystems.
Included in here are:
- driver core memory leak as reported and tested by syzbot and
developers
- dwc3 driver fixes for reported problems
- xhci driver fixes for reported problems
- USB gadget driver reverts to resolve regressions
- usbtmc driver fix for syzbot reported problem
- thunderbolt driver fixes for reported issues
- other small USB fixes
All of these, except for the driver core fix, have been in linux-next
with no reported problems. The driver core fix was tested and verified
to solve the issue by syzbot and the original reporter"
* tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
driver core: class: properly reference count class_dev_iter()
xhci: Fix incorrect tracking of free space on transfer rings
xhci-pci: Only run d3cold avoidance quirk for s2idle
usb-storage: fix deadlock when a scsi command timeouts more than once
usb: dwc3: fix a test for error in dwc3_core_init()
usb: typec: tps6598x: Fix fault at module removal
usb: gadget: u_ether: Fix host MAC address case
usb: typec: altmodes/displayport: fix pin_assignment_show
Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started"
Revert "usb: gadget: udc: core: Prevent redundant calls to pullup"
usb: gadget: drop superfluous ':' in doc string
usb: dwc3: debugfs: Resume dwc3 before accessing registers
USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value
usb: dwc3: fix gadget mode suspend interrupt handler issue
usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()
USB: usbtmc: Fix direction for 0-length ioctl control messages
thunderbolt: Clear registers properly when auto clear isn't in use
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- More device quirks (Sagi, Hristo, Adrian, Daniel)
- Controller delete race (Maurizo)
- Multipath cleanup fix (Christoph)
- Deny writeable mmap mapping on a readonly block device (Loic)
- Kill unused define that got introduced by accident (Christoph)
- Error handling fix for s390 dasd (Stefan)
- ublk locking fix (Ming)
* tag 'block-6.4-2023-05-20' of git://git.kernel.dk/linux:
block: remove NFL4_UFLG_MASK
block: Deny writable memory mapping if block is read-only
s390/dasd: fix command reject error on ESE devices
nvme-pci: Add quirk for Teamgroup MP33 SSD
ublk: fix AB-BA lockdep warning
nvme: do not let the user delete a ctrl before a complete initialization
nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk
nvme-pci: clamp max_hw_sectors based on DMA optimized limitation
nvme-pci: add quirk for missing secondary temperature thresholds
nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G
The syzbot fuzzer detected a problem in the udlfb driver, caused by an
endpoint not having the expected type:
usb 1-1: Read EDID byte 0 failed: -71
usb 1-1: Unable to get valid EDID from device/display
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880
drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted
6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
04/28/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
<TASK>
dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980
dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111
dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743
The current approach for this issue failed to catch the problem
because it only checks for the existence of a bulk-OUT endpoint; it
doesn't check whether this endpoint is the one that the driver will
actually use.
We can fix the problem by instead checking that the endpoint used by
the driver does exist and is bulk-OUT.
Reported-and-tested-by: syzbot+0e22d63dcebb802b9bc8@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Pavel Skripkin <paskripkin@gmail.com>
Fixes: aaf7dbe073 ("video: fbdev: udlfb: properly check endpoint type")
Signed-off-by: Helge Deller <deller@gmx.de>
