This patch was used to add TAS2781 devices on SPI support in sound/pci/hda.
It use ACPI node descript about parameters of TAS2781 on SPI, it like:
Scope (_SB.PC00.SPI0)
{
Device (GSPK)
{
Name (_HID, "TXNW2781") // _HID: Hardware ID
Method (_CRS, 0, NotSerialized)
{
Name (RBUF, ResourceTemplate ()
{
SpiSerialBusV2 (...)
SpiSerialBusV2 (...)
}
}
}
}
And in platform/x86/serial-multi-instantiate.c, those spi devices will be
added into system as a single SPI device, so TAS2781 SPI driver will
probe twice for every single SPI device. And driver will also parser
mono DSP firmware binary and RCA binary for itself.
The code support Realtek as the primary codec.
In patch version-10, add multi devices firmware binary support,
to compatble with windows driver, they can share same firmware binary.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20241216122008.15425-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As per specification, SDxLVI shall be at least 1 i.e.: two chunks to
perform a valid transfer. This is true for the PCM transfer code but
not firmware-transfer one.
Technical background:
- the LVI > 0 rule shall be obeyed in PCM transfer
- HW permits LVI == 0 when transfer is SW-controlled (SPIB)
- FW download is not a PCM transfer and is SW-controlled (SPIB)
The above is the fundament which AudioDSP firmware loading functions
have been built upon and worked since 2016. The presented changes are to
align the loading flows and avoid rising more questions in the future.
Achieve the goal by splitting snd_hdac_stream_setup_periods() into
substream-dependent and -independent part. Let snd_hdac_dsp_prepare()
utilize the latter so that both DSP-loading and PCM flows utilize same
BLDE setup loop which already takes care of cutting the buffer based on
azx_dev->period_bytes.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250114184239.120002-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the original change, rawmidi_info.tied_device showed -1 for the
unknown or untied device. But this would require the user-space to
check the protocol version and judge the value conditionally, which
is rather error-prone.
Instead, set the tied_device = 0 to be default as unknown, and
indicate the real device with the offset 1, for achieving more
backward compatibility.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20250114104711.19197-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far we notify the sequencer client and port changes upon UMP FB
changes, but those aren't really corresponding to the UMP updates.
e.g. when a FB info gets updated, it's not notified but done only when
some of sequencer port attribute is changed. This is no ideal
behavior.
This patch adds the two new sequencer event types for notifying the
UMP EP and FB changes via the announce port. The new event takes
snd_seq_ev_ump_notify type data, which is compatible with
snd_seq_addr (where the port number is replaced with the block
number).
The events are sent when the EP and FB info gets updated explicitly
via ioctl, or the backend UMP receives the corresponding UMP
messages.
The sequencer protocol version is bumped to 1.0.5 along with it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
Currently the system notification helper assumes only the non-atomic
delivery. For allowing an event delivery in non-atomic context, add
the atomic flag to the helper function.
This is a preliminary change for the support of UMP EP/FB
notification.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-8-tiwai@suse.de
The UMP helper didn't set up the rawmidi name string by itself but
left it to the driver. But since the only user (USB MIDI2 driver)
picks up the UMP info name string to the rawmidi name as default, it's
better to set up in the UMP core side.
Meanwhile, UMP receives the EP name string from the device, and it
might contain garbage letters. We should purify the string to be
usable for the kernel as done previously for UMP Group names.
This implements the copy of the UMP info name string into the rawmidi
name at the creation of UMP EP object in a safe way to strip the
non-ASCII or non-printable characters. Also, change the reference
from the legacy rawmidi and other places to rawmidi name field instead
of ump info; this assures the sane strings.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-6-tiwai@suse.de
The UMP group names are referred as the corresponding sequencer port
names, hence they should be proper ASCII strings. OTOH, the UMP group
names are composed from the UMP FB strings that are received from the
device; i.e. a device may give some bogus letters and we can't trust
them fully.
To assure that the group names consist of the proper ASCII strings,
replace the normal string copy and append operations with special ones
that strip the non-printable letters.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-5-tiwai@suse.de
The UMP legacy rawmidi may turn on/off the substream dynamically
depending on the UMP Function Block information. So far, there was no
direct way to know whether the substream is disabled (inactive) or
not; at most one can take a look at the substream name string or try
to open and get -ENODEV.
This patch extends the rawmidi info ioctl to show the current inactive
state of the given substream. When the selected substream is
inactive, info flags field contains the new bit flag
SNDRV_RAWMIDI_INFO_STREAM_INACTIVE.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-3-tiwai@suse.de
The UMP legacy rawmidi is derived from the UMP rawmidi, but currently
there is no way to know which device is involved in other side.
This patch extends the rawmidi info ioctl to show the tied device
number. As default it stores -1, indicating that no tied device.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-2-tiwai@suse.de
The snd_hdac_adsp_xxx() wrap snd_hdac_reg_xxx() helpers to simplify
register access for AudioDSP drivers e.g.: the avs-driver. Byte- and
word-variants of said helps do not expand to bare readx/writex()
operations but functions instead and, due to pointer type
incompatibility, cause compilation to fail.
As the macros are utilized by the avs-driver alone, relocate the code
introduced with commit c19bd02e90 ("ALSA: hda: Add helper macros for
DSP capable devices") into the avs/ directory and update it to operate
on 'adev' i.e.: the avs-driver-context directly to fix the issue.
Fixes: c19bd02e90 ("ALSA: hda: Add helper macros for DSP capable devices")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250110113326.3809897-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CONFIG_SND_SEQ_UMP_CLIENT is a Kconfig for a sequencer client
corresponding to the UMP rawmidi, while we have another major knob
CONFIG_SND_SEQ_UMP that specifies whether the sequencer core supports
UMP packets or not. Strictly speaking both of them are independent,
but practically seen, it makes no sense to enable
CONFIG_SND_SEQ_UMP_CLIENT without UMP support itself.
This patch makes such an implicit dependency clearer. Now
CONFIG_SND_SEQ_UMP_CLIENT depends on both CONFIG_SND_UMP and
CONFIG_SND_SEQ_UMP. Meanwhile, CONFIG_SND_SEQ_UMP is enabled as
default when CONFIG_SND_UMP is set.
Fixes: 81fd444aa3 ("ALSA: seq: Bind UMP device")
Link: https://patch.msgid.link/20250101125548.25961-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent bug report spotted on the old OSS sequencer code that tries
to combine incoming SysEx messages to a single sequencer event. This
is good, per se, but it has more demerits:
- The sysex message delivery is delayed until the very last event
- The use of internal buffer forced the serialization
The recent fix in commit 0179488ca9 ("ALSA: seq: oss: Fix races at
processing SysEx messages") addressed the latter, but a better fix is
to handle the sysex messages immediately, i.e. just send each incoming
fragmented sysex message as is. And this patch implements that.
This resulted in a significant cleanup as well.
Note that the only caller of snd_seq_oss_synth_sysex() is
snd_seq_oss_process_event(), and all its callers dispatch the event
immediately, so we can just put the passed buffer pointer to the event
record to be handled.
Reported-and-tested-by: Kun Hu <huk23@m.fudan.edu.cn>
Link: https://lore.kernel.org/2B7E93E4-B13A-4AE4-8E87-306A8EE9BBB7@m.fudan.edu.cn
Link: https://patch.msgid.link/20241231115523.15796-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We introduced a couple of helpers for copying iomem over iov_iter, and
the functions were formed like the former copy_from/to_user(), and the
return value was adjusted to 0/-EFAULT, which made the code transition
a bit easier at that time.
OTOH, the standard copy_from/to_iter() functions have different
argument orders and the return value, and this difference can be
confusing. It's not only confusing but dangerous; actually I did
write a wrong code due to that once :-<
For reducing the confusion, this patch changes the syntax of those
helpers to align with the standard copy_from/to_iter(). The argument
order is changed and the return value is the size of copied bytes.
The callers of those functions are updated accordingly, too.
Link: https://patch.msgid.link/20241230114903.4959-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit c2d188e137.
Although it's fine to filter the invalid UMP groups at the first probe
time, this will become a problem when UMP groups are updated and
(re-)activated. Then there is no way to re-add the substreams
properly for the legacy rawmidi, and the new active groups will be
still invisible.
So let's revert the change. This will move back to showing the full
16 groups, but it's better than forever lost.
Link: https://patch.msgid.link/20241230114023.3787-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
3d3f43fab4 ("ALSA: compress_offload: improve file descriptors
installation for dma-buf") fixed some of descriptor races in
snd_compr_task_new(), but there's a couple more left.
We need to grab the references to dmabuf before moving them into
descriptor table - trying to do that by descriptor afterwards might
end up getting a different object, with a dangling reference left in
task->{input,output}
Fixes: 3d3f43fab4 ("ALSA: compress_offload: improve file descriptors installation for dma-buf")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/20241229185232.GA1977892@ZenIV
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pattern rule `$(OUTPUT)/%: %.c` inadvertently included a circular
dependency on the global-timer target due to its inclusion in
$(TEST_GEN_PROGS_EXTENDED). This resulted in a circular dependency
warning during the build process.
To resolve this, the dependency on $(TEST_GEN_PROGS_EXTENDED) has been
replaced with an explicit dependency on $(OUTPUT)/libatest.so. This change
ensures that libatest.so is built before any other targets that require it,
without creating a circular dependency.
This fix addresses the following warning:
make[4]: Entering directory 'tools/testing/selftests/alsa'
make[4]: Circular default_modconfig/kselftest/alsa/global-timer <- default_modconfig/kselftest/alsa/global-timer dependency dropped.
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory 'tools/testing/selftests/alsa'
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20241218025931.914164-1-lizhijian@fujitsu.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With CONFIG_DMA_API_DEBUG enabled, the following warning is observed:
DMA-API: snd_hda_intel 0000:03:00.1: device driver failed to check map error[device address=0x00000000ffff0000] [size=20480 bytes] [mapped as single]
WARNING: CPU: 28 PID: 2255 at kernel/dma/debug.c:1036 check_unmap+0x1408/0x2430
CPU: 28 UID: 42 PID: 2255 Comm: wireplumber Tainted: G W L 6.12.0-10-133577cad6bf48e5a7848c4338124081393bfe8a+ #759
debug_dma_unmap_page+0xe9/0xf0
snd_dma_wc_free+0x85/0x130 [snd_pcm]
snd_pcm_lib_free_pages+0x1e3/0x440 [snd_pcm]
snd_pcm_common_ioctl+0x1c9a/0x2960 [snd_pcm]
snd_pcm_ioctl+0x6a/0xc0 [snd_pcm]
...
Check for returned DMA addresses using specialized dma_mapping_error()
helper which is generally recommended for this purpose by
Documentation/core-api/dma-api.rst.
Fixes: c880a51466 ("ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/r/CABXGCsNB3RsMGvCucOy3byTEOxoc-Ys+zB_HQ=Opb_GhX1ioDA@mail.gmail.com/
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20241219203345.195898-1-pchelkin@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The compression offload code cannot be in a loadable module unless it
imports that namespace:
ERROR: modpost: module snd-compress uses symbol dma_buf_get from namespace DMA_BUF, but does not import it.
ERROR: modpost: module snd-compress uses symbol dma_buf_put from namespace DMA_BUF, but does not import it.
ERROR: modpost: module snd-compress uses symbol dma_buf_fd from namespace DMA_BUF, but does not import it.
Fixes: 04177158cf ("ALSA: compress_offload: introduce accel operation mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241216093410.377112-1-arnd@kernel.org
On Chromebooks based on Mediatek MT8195 or MT8188, the audio frontend
(AFE) is limited to accessing a very small window (1 MiB) of memory,
which is described as a reserved memory region in the device tree.
On these two platforms, the maximum buffer size is given as 512 KiB.
The MediaTek common code uses the same value for preallocations. This
means that only the first two PCM substreams get preallocations, and
then the whole space is exhausted, barring any other substreams from
working. Since the substreams used are not always the first two, this
means audio won't work correctly.
This is observed on the MT8188 Geralt Chromebooks, on which the
"mediatek,dai-link" property was dropped when it was upstreamed. That
property causes the driver to only register the PCM substreams listed
in the property, and in the order given.
Instead of trying to compute an optimal value and figuring out which
streams are used, simply disable preallocation. The PCM buffers are
managed by the core and are allocated and released on the fly. There
should be no impact to any of the other MediaTek platforms.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241219105303.548437-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
