struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
GPIO core already handles missing direction_input/output() callbacks.
The ones in this driver also effectively return magic numbers which is
not optimal either (the number accidentally corresponds with -EPERM which
is different from the number GPIOLIB returns and so inconsistent). Just
remove them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In dib7090p_rw_on_apb, msg is controlled by user. When msg[0].buf is null and
msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing
msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash. Similar issue occurs when access
msg[1].buf[0] and msg[1].buf[1].
Similar commit: commit 0ed554fd76 ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Link: https://lore.kernel.org/r/20250616013231.730221-1-alexguo1023@gmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash.
Similar commit: commit 0ed554fd76 ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Link: https://lore.kernel.org/r/20250616013353.738790-1-alexguo1023@gmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Complete the conversion from soc_camera to a full fledge media
controller enabled devices for all supported generations of the device.
All work is already done as this is already supported on Gen3, and
later.
All that is missing is removing all special cases for the non
media-graph call paths and use the common ones in their place.
The one change that stands out is dropping the doubling of the height in
the Gen2 scaler setup, rvin_scaler_gen2(). In the Gen2 non-MC world the
VIN size was set to match the video source subdevices, and if that was a
TOP/BOTTOM video source it needed to be doubled for the scaler to
function properly. In the MC world this is now handled by user-space
configuration of the pipeline and the adjustment is not needed.
Mark the completion of converting from soc_camera by injecting an
attribution of myself in the header.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-13-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The VIN usage of v4l-async is complex and stems from organic growth of
the driver of supporting both private local subdevices (Gen2, Gen3) and
subdevices shared between all VIN instances (Gen3 and Gen4).
The driver used a separate notifier for each VIN for the private local
ones, and a shared group notifier for the shared ones. This was complex
and lead to subtle bugs when unbinding and later rebinding subdevices in
one of the notifiers having to handle different edge cases depending on
if it also had subdevices in the other notifiers etc.
To simplify this have the Gen2 devices allocate and form a VIN group
too. This way all subdevices on all models can be collect in a
single group notifier. Then there is only a single complete callback for
all where the video devices and subdevice nodes can be registered etc.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-9-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
To implement VIDIOC_QUERYCTRL, we need to know the minimum, maximum,
step and flags of the control. For some of the controls, this involves
querying the actual hardware.
Some non-compliant cameras produce errors when we query them. These
error can be triggered every time, sometimes, or when other controls do
not have the "right value". Right now, we populate that error to userspace.
When an error happens, the v4l2 framework does not copy the v4l2_queryctrl
struct to userspace. Also, userspace apps are not ready to handle any
other error than -EINVAL.
One of the main usecases of VIDIOC_QUERYCTRL is enumerating the controls
of a device. This is done using the V4L2_CTRL_FLAG_NEXT_CTRL flag. In
that usecase, a non-compliant control will make it almost impossible to
enumerate all controls of the device.
A control with an invalid max/min/step/flags is better than non being
able to enumerate the rest of the controls.
This patch:
- Retries for an extra attempt to read the control, to avoid spurious
errors. More attempts do not seem to produce better results in the
tested hardware.
- Makes VIDIOC_QUERYCTRL return 0 for -EIO errors.
- Introduces a warning in dmesg so we can have a trace of what has happened
and sets the V4L2_CTRL_FLAG_DISABLED.
- Makes sure we keep returning V4L2_CTRL_FLAG_DISABLED for all the next
attempts to query that control (other operations have the same
functionality as now).
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250502-uvc-eaccess-v8-1-0b8b58ac1142@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
Pull timer fix from Thomas Gleixner:
"Add the missing seq_file forward declaration in the timer namespace
header"
* tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timens: Add struct seq_file forward declaration
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_msr_perf_counter_() and move all the logic to
add_msr_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_rapl_perf_counter_() and move all the logic to
add_rapl_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Quit early for unsupported RAPL counters.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rapl_joules bit should always be checked even if
platform_features->rapl_msrs is not set or no_msr flag is used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
