Havign a single set of InfoFrame callbacks doesn't provide enough
information to the DRM framework about the InfoFrame types that are
actually supported. Also it's not really future-proof: it provides a way
to program only a single Vendor-Specific frame, however we might need to
support multiple VSIs at the same time (e.g. HDMI vs HDMI Forum
VSIs).
Provide separate sets of callbacks, one per the InfoFrame type.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-6-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Replace legacy DRM_DEBUG/INFO/WARN/ERROR logging with the corresponding
device-based drm_dbg(), drm_info(), drm_warn() and drm_err() helpers.
For some messages, adjust the log level to better reflect their severity.
This allows filtering via drm.debug, reduces log spam, and helps
differentiate v3d logs from vc4 logs.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260112-v3d-drm-debug-v2-2-8ef6244c97bb@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
All CPU job extension parsers duplicate the same validation procedure:
ensure the extension is attached to a CPU job (not a GPU job) and that
only a single CPU job extension is associated with a given job.
Create a function to consolidate these checks and reduce the boilerplate
across the various CPU job extension handlers. While here, convert the
legacy DRM_DEBUG with a more appropriate drm_dbg().
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260112-v3d-drm-debug-v2-1-8ef6244c97bb@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized
property blobs backed by kernel memory.
Currently, the blob data allocation is not accounted to the allocating
process's memory cgroup, allowing unprivileged users to trigger unbounded
kernel memory consumption and potentially cause system-wide OOM.
Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory
is properly charged to the caller's memcg. This ensures existing cgroup
memory limits apply and prevents uncontrolled kernel memory growth without
introducing additional policy or per-file limits.
Signed-off-by: Xiao Kan <814091656@qq.com>
Signed-off-by: Xiao Kan <xiao.kan@samsung.com>
Link: https://patch.msgid.link/tencent_D12AA2DEDE6F359E1AF59405242FB7A5FD05@qq.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Since commit 56de5e305d ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L")
we may get the following kernel panic, for some panels, when rebooting:
systemd-shutdown[1]: Rebooting.
Call trace:
...
do_serror+0x28/0x68
el1h_64_error_handler+0x34/0x50
el1h_64_error+0x6c/0x70
rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P)
mipi_dsi_device_transfer+0x44/0x58
mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4
ili9881c_unprepare+0x38/0x88
drm_panel_unprepare+0xbc/0x108
This happens for panels that need to send MIPI-DSI commands in their
unprepare() callback. Since the MIPI-DSI interface is stopped at that
point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic.
Fix by moving rzg2l_mipi_dsi_stop() to new callback function
rzg2l_mipi_dsi_atomic_post_disable().
With this change we now have the correct power-down/stop sequence:
systemd-shutdown[1]: Rebooting.
rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry
ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry
rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry
reboot: Restarting system
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260112154333.655352-1-hugo@hugovil.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
The function drm_property_replace_blob_from_id() allows checking whether
the blob size is equal to a predefined value. In case of variable-size
properties (like the gamma / degamma LUTs) we might want to check for
the blob size against the maximum, allowing properties of the size
lesser than the max supported by the hardware. Extend the function in
order to support such checks.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260106-drm-fix-lut-checks-v3-2-f7f979eb73c8@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
We have a helper to get property values for non-atomic drivers and
another one default property values for atomic drivers. In some cases we
need the ability to get value of immutable property, no matter what kind
of driver it is. Implement new property-related helper,
drm_object_immutable_property_get_value(), which lets the caller to get
the value of the immutable property.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260106-drm-fix-lut-checks-v3-1-f7f979eb73c8@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
FP8006P datasheet mentions:
> It is necessary to wait 15msec after releasing RESX before sending
> commands. Also Sleep Out command cannot be sent for 120 msec.
This hasn't been respected by the driver so far, which could interfere
with the LCD init code sequence performed by the controller. In some cases
this leads to VCOM voltage being set to a wrong value, causing "halo"
effects, temporary burn-in around the edges of the screen and degraded
image contrast.
T3 and T4 are counted from when VDDI is enabled. There's no need to add
them when we've already waited more than that in T2 and T2d.
While FT8006P datasheet does not mention a delay between exiting sleep
mode and turning the display on, code provided by the vendor uses 120ms
there and it happens to be the same value as required in newer datasheets
for newer controllers from the same family, so it seems appropriate to
use it here as well.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260105-mantix-halo-fixes-v1-2-1ebc9b195a34@puri.sm
In jdi_panel_dsi_remove(), jdi is explicitly checked, indicating that it
may be NULL:
if (!jdi)
mipi_dsi_detach(dsi);
However, when jdi is NULL, the function does not return and continues by
calling jdi_panel_disable():
err = jdi_panel_disable(&jdi->base);
Inside jdi_panel_disable(), jdi is dereferenced unconditionally, which can
lead to a NULL-pointer dereference:
struct jdi_panel *jdi = to_panel_jdi(panel);
backlight_disable(jdi->backlight);
To prevent such a potential NULL-pointer dereference, return early from
jdi_panel_dsi_remove() when jdi is NULL.
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251218120955.11185-1-islituo@gmail.com
The DRM buddy allocator is a shared DRM memory management
component used by multiple DRM drivers.
Matthew Auld and Arun Pravin have been actively involved in
maintaining this code, including patch review and functional
changes.
Add a dedicated MAINTAINERS entry to reflect the current
maintainership.
v2: Include drivers/gpu/drm/tests/drm_buddy_test.c file (Matthew).
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260112114022.315139-1-Arunpravin.PaneerSelvam@amd.com
Fix all kernel-doc warnings in rocket_accel.h:
Warning: include/uapi/drm/rocket_accel.h:35 Incorrect use of kernel-doc
format: * Output: DMA address for the BO in the NPU address space.
This address
and 22 warnings like these:
Warning: include/uapi/drm/rocket_accel.h:43 struct member 'size'
not described in 'drm_rocket_create_bo'
Warning: include/uapi/drm/rocket_accel.h:60 struct member 'handle'
not described in 'drm_rocket_prep_bo'
Warning: include/uapi/drm/rocket_accel.h:73 struct member 'handle'
not described in 'drm_rocket_fini_bo'
Warning: include/uapi/drm/rocket_accel.h:86 struct member 'regcmd'
not described in 'drm_rocket_task'
Warning: include/uapi/drm/rocket_accel.h:116 struct member 'tasks'
not described in 'drm_rocket_job'
Warning: include/uapi/drm/rocket_accel.h:135 struct member 'jobs'
not described in 'drm_rocket_submit'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20251023062440.4093661-1-rdunlap@infradead.org
There already is a function to return the offset of the core for a given
struct device, so let's reuse that function instead of reimplementing
the same logic.
There's one change in behavior when a struct device is passed which
doesn't match any core's. Before, we would continue through
rocket_remove() but now we exit early, to match what other callers of
find_core_for_dev() (rocket_device_runtime_resume/suspend()) are doing.
This however should never happen. Aside from that, no intended change in
behavior.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20251215-rocket-reuse-find-core-v1-1-be86a1d2734c@cherry.de
When rocket_job_init() is called, iommu_group_get() has already been
called, therefore we should call iommu_group_put() and make the
iommu_group pointer NULL. This aligns with what's done in
rocket_core_fini().
If pm_runtime_resume_and_get() somehow fails, not only should
rocket_job_fini() be called but we should also unwind everything done
before that, that is, disable PM, put the iommu_group, NULLify it and
then call rocket_job_fini(). This is exactly what's done in
rocket_core_fini() so let's call that function instead of duplicating
the code.
Fixes: 0810d5ad88 ("accel/rocket: Add job submission IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20251215-rocket-error-path-v1-1-eec3bf29dc3b@cherry.de
Add support for the dw-hdmi-qp driver to handle devices with missing
HPD pins.
Since in this situation we are now polling for the EDID data via i2c
change the error message to a rate limited debug message when we are
unable to complete an i2c read, as a disconnected device would
otherwise fill dmesg with i2c read errors.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251119225526.70588-3-macroalpha82@gmail.com
Add an attribute of "no-hpd" for the Rockchip dw-hdmi-qp controller.
This is used to describe implementations where the HPD pin is not
connected or used for other purposes, such as in the RK3588S based
Gameforce Ace which repurposed the GPIO for an additional face
button.
The "no-hpd" option was chosen to be consistent with other devices
which already define this parameter for broken or missing hpd
functionality.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251119225526.70588-2-macroalpha82@gmail.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251031104846.119503-3-marco.crivellari@suse.com
