Merge "Nomadik DTS changes for v4.7" from Linus Walleij:
- Add accelerometer for NHK15
- Add DMA engine definitions and UART channels
* tag 'nomadik-dts-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: nomadik: add DMA engine and some channels
ARM: dts: nomadik: add accelerometer IRQ and pin setting
Merge "mvebu dt for 4.7 (part 1)" from Gregory CLEMENT:
- add hardware monitor support in the NSA320 device tree
- update makefile with kirkwood-ds112.dtb and kirkwood-nsa320.dtb
- fix GPIO config on the Linksys boards
- various Kirkwood DT warning fixup from the newer DT compiler
* tag 'mvebu-dt-4.7-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: Add DTS for Linksys EA4200v2/EA4500
ARM: dts: orion5x: add device tree for kurobox-pro
ARM: dts: kirkwood: Add address go regulator unit name
ARM: dts: kirkwood: Add address to mbus unit name
ARM: dts: kirkwood: Remove address from gpio-i2c unit name
ARM: dts: kirkwood: Fixup pcie DT warnings
ARM: dts: kirkwood: Add address to ethernet-phy unit name
ARM: dts: kirkwood: Remove address from dsa unit name
ARM: dts: kirkwood: Remove node address from leds
ARM: dts: kirkwood: Remove button address and fixup names
ARM: dts: kirkwood: add kirkwood-nsa320.dtb to Makefile
ARM: dts: kirkwood: add kirkwood-ds112.dtb to Makefile
ARM: mvebu: fix GPIO config on the Linksys boards
ARM: dts: kirkwood: Add the hardware monitor to the NSA320 device tree
Merge "Samsung Device Tree updates and improvements for v4.7" from Krzysztof Kozlowski:
1. Enable accelerated AES (Security SubSystem) on Exynos4412-based boards.
2. Enable HDMI CEC on Exynos4412-based Odroid.
3. Add regulator supplies for eMMC/SD on Odroid XU3/XU4.
4. Fix DTC unit name warnings.
5. Merge topic branch of new Artik5 board.
* tag 'samsung-dt-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5p: Fix DTC unit name warnings in SMDKv210 board
ARM: dts: exynos: Fix DTC unit name warnings in Exynos5440
ARM: dts: exynos: Fix DTC unit name warnings in SMDK5420
ARM: dts: exynos: Fix DTC unit name warnings in Peach Pit
ARM: dts: exynos: Fix DTC unit name warnings in Exynos542x
ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250
ARM: dts: exynos: Fix DTC unit name warnings in Exynos4x12
ARM: dts: exynos: Fix DTC unit name warnings in Trats2 board
ARM: dts: exynos: Fix DTC unit name warnings in Exynos4
ARM: dts: exynos: Fix DTC unit name warnings in Exynos3250
ARM: dts: exynos: Fix DTC unit name warnings in cros-adc-thermistors
ARM: dts: exynos: Add eMMC and SD regulator supplies to Odroid XU3/XU4
ARM: dts: exynos: Enable the HDMI CEC device on Exynos4412 Odroid boards
ARM: dts: exynos: Add node for the HDMI CEC device to exynos4
ARM: dts: exynos: Add HDMI CEC pin definition to exynos4 pinctrl
ARM: dts: exynos: Enable SSS on Odroid X/X2/U3 family
ARM: dts: exynos: Enable SSS on Trats2
ARM: dts: exynos: Add Security SubSystem node to Exynos4
Merge "Topic branch for Device Tree changes for Exynos 3250 for v4.7" from Krzysztof Kozlowski:
Merge necessary new clocks from Sylwester (used by new board) and add support
for Exynos3250-based Artik5 board.
* tag 'samsung-dt-exynos3250-artik5-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add MSHC2 DT node for SD card for exynos3250-artik5-eval board
ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 module
ARM: dts: exynos: Add MSHC2 DT node for Exynos3250 SoC
ARM: dts: exynos: Add UART2 DT node for Exynos3250 SoC
ARM: dts: exynos: Add initial gpio setting of MMC2 device for exynos3250-monk
ARM: dts: exynos: Add initial pin configuration for exynos3250-rinato
clk: samsung: exynos3250: Add MMC2 clock
clk: samsung: exynos3250: Add UART2 clock
dt-bindings: Add the clock id of UART2 and MMC2 for Exynos3250
This adds the DMA engine to the Nomadik and assigns the UART
DMA channels. Both slave DMA for UARTs and the memcpy engine
works fine, tested on the Nomadik NHK15.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The LIS3LV02DL accelerometer on the Nomadik NHK15 can generate
IRQs by the DRDY line. Map this in the DTS file and set up the
pin as input to the SoC.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This platform is based on a Marvell 88E6282 SoC and 88E6171 switch.
[gregory.clement@free-electrons.com: fix block comment style]
Signed-off-by: Bert Vermeulen <bert@biot.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add dts file to support Buffalo/Revogear Kurobox-Pro, which is marvell
orion5x based 3.5" HDD NAS.
It's a quite old product and already discontinued. So there's no
official website for it. But it was an early product which used marvell
orion5x 88F5182 chipset, it's popular in the community.
Some unofficial site:
- http://buffalo.nas-central.org/wiki/Category:KuroboxPro
- http://nice.kaze.com/KUROPRO_ProductSpecifications.pdf
This device tree is based on the board file:
arch/arm/mach-orion5x/kurobox_pro-setup.c
However, the probing order of NAND and JEDEC-Flash are different from
the original board file, this results in incompatible minor number
for a few /dev/mtdX and /dev/mtdblockX devices.
So I still want to keep the board file for the time being.
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
PCIe has a range property, so the unit name should contain an address.
Make use of the label to enable individual PCIe busses. Also, fixup
the synology dtsi file which added a label pcie2 rather than using the
existing pcie1 label.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
PHYs have an address on the mdio bus. So the unit name should contain
an address. This is complicated in that some .dtsi files contain the
node, but the reg is set in the .dts file. In this case, use the
abstract address X.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The dsa node does not have a reg property, so remove the address from
the unit name.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The DT compiler is now warning about unit names with addresses but not
reg property. Fix all the gpio-key buttons which causes warnings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
A lot display-controller nodes for DSI and the Analogix DP on rk3288
as well as general display+hdmi support on rk3036. With the Analogix
DP support, Veyron Chromeboks can now finally use their internal
display.
Other than this big improvement we have thermal support on the rk3228,
a long time missing binding document for the General Register Files
block, better operating points for Veyron devices and a bunch of fixes
with parts stemming from warnings that new dtc version can generate.
* tag 'v4.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits)
ARM: dts: rockchip: move rk3036 memory definition to board files
ARM: dts: rockchip: enable the eDP on rk3288 veyron devices
ARM: dts: rockchip: simple panel and backlight supplies on veyron boards
ARM: dts: rockchip: override edp hpd handling on veyron-pinky and speedy
ARM: dts: rockchip: add rk3288-veyron-minnie backlight and panel settings
ARM: dts: rockchip: add rk3288-veyron-jaq backlight and panel overrides
ARM: dts: rockchip: add core rk3288-veyron backlight and panel nodes
ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators
ARM: dts: rockchip: move edp-hpd pin definition into common location
ARM: dts: rockchip: add rk3288 displayport controller node
ARM: dts: rockchip: add rk3288 edp-phy node
ARM: dts: rockchip: add missing unitname to cpu_leakage efuse
ARM: dts: rockchip: drop unneeded properties from mipi node
ARM: dts: rockchip: clean up gpio-keys nodes
ARM: dts: rockchip: fix missing usbphy unit-names
ARM: dts: rockchip: fix rk3288 power-domain unit names
ARM: dts: rockchip: update rk3288-veyron cpu operating points
ARM: dts: rockchip: remove broken-cd from emmc and sdio
ARM: dts: rockchip: enable the tsadc for rk3228 evb
ARM: dts: rockchip: add the thermal main info found on rk3228
...
Signed-off-by: Olof Johansson <olof@lixom.net>
SoCFPGA DTS updates for v4.7
- Update SD/MMC node for Arria10
- Update Arria10 with clock and interrupt fields for DMA
- Remove 'phy-addr' from stmmac node
- Remove ethernet node from Cyclone5 DTSI
- Add LEDs/KEYs/SWs support on Sockit
- Add L2 and OCRAM EDAC dts entries
- Add reset control for USB
* tag 'socfpga_dts_for_v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: add reset control for USB
ARM: dts: socfpga: Add Altera Arria10 OCRAM EDAC devicetree entry
ARM: dts: socfpga: Add Altera Arria10 L2 Cache EDAC devicetree entry
ARM: dts: socfpga: Add support for HPS KEYs/SWs on SoCKit
ARM: dts: socfpga: Add support for HPS LEDs on SoCKit
ARM: dts: socfpga: Drop gmac0 from CV dtsi
ARM: dts: socfpga: Drop phy-addr OF property from CV dtsi
ARM: dts: socfpga: Add missing clock and interrupt fields for Arria10 DMA
ARM: dts: socfpga: add the clk-phase property for sd/mmc clock
ARM: dts: socfpga: add cap-sd-highspeed for SD/MMC node
Signed-off-by: Olof Johansson <olof@lixom.net>
Device Tree additions for LPC18xx platform
- CREG clock controller
- Real Time Clock (RTC)
- Analog peripherals (ADC/DAC)
- Warning fixes for the new dtc compiler
With the CREG clock controller in place it is now possible
to enable the internal RTC on LPC18xx/43xx platforms. The
analog peripherals (ADC/DAC) has also been added here and
enabled on both the EA4357 dev kit and Hitex eval board.
In addition to the new entries there are a fixes for the
DT warnings generated by the new dtc.
* tag 'lpc18xx_dts_for_4.7' of https://github.com/manabian/linux-lpc:
dt-bindings: phy-lpc18xx-usb-otg: remove unit address from binding
ARM: dts: lpc4350-hitex-eval: fix unit name warnings from dtc
ARM: dts: lpc4357-ea4357: fix unit name warnings from dtc
ARM: dts: lpc18xx: remove unit addresses from creg childs
ARM: dts: armv7-m: add unit name to interrupt-controller
ARM: dts: lpc4350-hitex-eval: add adc1
ARM: dts: lpc4357-ea4357: add dac
ARM: dts: lpc4357-ea4357: add adc0
ARM: dts: lpc18xx: add dac node
ARM: dts: lpc18xx: add adc nodes
ARM: dts: lpc18xx: add rtc node
ARM: dts: lpc18xx: add creg-clk node
Signed-off-by: Olof Johansson <olof@lixom.net>
Versatile DTS changes, baseline for the v4.7 series:
- Add CLCD panel nodes to PB1176 and PB11MPCore
- Add a DT binding blurb for the Versatile IB2 syscon
- Add DTS files for the (QEMU supported) RealView EB
boards in all variants.
- Add DTS files for the (QEMU supported) RealView PBA8
and PBX-A9 board variants.
* tag 'versatile-dts-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: realview: DT support for the PBA8 and PBX-A9
ARM: dts: realview: support all the RealView EB board variants
ARM: dts: realview: PB1176: define a standard VGA panel
ARM: dts: realview: PB11MPCore: define a standard VGA panel
Documentation/DT: add blurb for IB2 syscon to Versatile
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas ARM64 Based SoC DT Updates for v4.7
* Use USB3.0 fallback compatibility string in DT for r8a7795 SoC
* Add CAN support to DT for r8a7795 SoC
* tag 'renesas-arm64-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: r8a7795: Use USB3.0 fallback compatibility string
arm64: dts: r8a7795: Add CAN support
arm64: dts: r8a7795: Add CAN external clock support
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix following DTC warnings in SMDKv210 board:
Warning (unit_address_vs_reg): Node /soc/fimd@f8000000/display-timings/timing@0 has a unit name, but no reg property
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fix following DTC warnings in Exynos5440 boards:
Warning (unit_address_vs_reg): Node /pinctrl has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /rtc has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fix following DTC warnings in Exynos5420 SMDK5420:
Warning (unit_address_vs_reg): Node /dp-controller@145B0000/display-timings/timing@0 has a unit name, but no reg property
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fix following DTC warnings in Exynos5420 Peach Pit:
Warning (unit_address_vs_reg): Node /dp-controller@145B0000/ports/port@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@48/ports/port@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@48/ports/port@1 has a unit name, but no reg property
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fix following DTC warnings in all Exynos542x/5800 boards:
Warning (unit_address_vs_reg): Node /video-phy@10040728 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /video-phy@10040714 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000/dwc3 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /usb@12400000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12400000/dwc3 has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fix following DTC warnings in all Exynos5250 boards:
Warning (unit_address_vs_reg): Node /dp-controller@145B0000/display-timings/timing@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000/dwc3 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /hdmi has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /mixer has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /video-phy@10040720 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12C70000/trackpad has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/embedded-controller has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/power-regulator has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c@12CA0000/embedded-controller has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fix following DTC warnings in Exynos4x12 boards:
Warning (unit_address_vs_reg): Node /camera/fimc-is@12000000/pmu has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fix following DTC warnings in Trats2 board:
Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693@66/regulators/ESAFEOUT1@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693@66/regulators/ESAFEOUT2@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693@66/regulators/CHARGER@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /thermistor-ap@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /thermistor-battery@1 has a unit name, but no reg property
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fix following DTC warnings in all Exynos4 boards:
Warning (unit_address_vs_reg): Node /soc/video-phy@10020710 has a unit name, but no reg property
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fix following DTC warnings in Exynos3250 boards:
Warning (unit_address_vs_reg): Node /soc/video-phy@10020710 has a unit name, but no reg property
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fix following DTC warnings in cros-adc-thermistors:
Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /adc@12D10000/ncp15wb473@6 has a unit name, but no reg property
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Add vmmc and vqmmc supplies from MF circuit sheets for eMMC and SD on
odroid XU3 and XU4 to avoid warnings:
dwmmc_exynos 12200000.mmc: Looking up vmmc-supply property in node /mmc@12200000 failed
Also remove their always_on properties so the regulators could be
disabled when not used.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Topic branch for Device Tree changes for Exynos 3250 for v4.7:
Merge necessary new clocks from Sylwester (used by new board) and add support
for Exynos3250-based Artik5 board.
The socfpga_cyclone5.dtsi is included by all DTS files which describe boards
using the Cyclone V SoC. The Cyclone V SoC has two ethernet controllers and
different boards use none, one or both of them.
The /soc/ethernet@ff702000/{} node in socfpga_cyclone5.dtsi unconditionaly
enabled gmac0 interface, which is clearly wrong for those boards which use
gmac1 interface instead.
This patch removes the entire /soc/ethernet@ff702000/{} node from the
socfpga_cyclone5.dtsi file. This is correct, since all of the board which
include this file also have correct gmac0 or gmac1 node present in them.
Minor correction had to be done to EBV SoCrates, which didn't define PHY
mode explicitly, but inherited it from the socfpga_cyclone5.dtsi .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
The phy-addr property of stmmac is deprecated and the stmmac driver
does not use it either. On the contrary, the driver will warn if
this property is defined. Remove it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
The PL330 DMA driver will not load on Arria10 without devicetree entries
for clocks and clock_names. This patch adds those entries. It also adds
the ninth interrupt, which is required for error detection.
Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
The CIU clock for the SD/MMC should be the sdmmc_clk and not the
sdmmc_free_clk. Also, add the correct phase shift the sdmmc_clk.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Pull ARM fixes from Russell King:
"A couple of small fixes, and wiring up the new syscalls which appeared
during the merge window"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8550/1: protect idiv patching against undefined gcc behavior
ARM: wire up preadv2 and pwritev2 syscalls
ARM: SMP enable of cache maintanence broadcast
Pull MMC fixes from Ulf Hansson:
"Here are a couple of mmc fixes intended for v4.6 rc3:
MMC host:
- sdhci: Fix regression setting power on Trats2 board
- sdhci-pci: Add support and PCI IDs for more Broxton host controllers"
* tag 'mmc-v4.6-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers
mmc: sdhci: Fix regression setting power on Trats2 board
Pull i2c fixes from Wolfram Sang:
"Some bugfixes from I2C:
- fix a uevent triggered boot problem by removing a useless debug
print
- fix sysfs-attributes of the new i2c-demux-pinctrl driver to follow
standard kernel behaviour
- fix a potential division-by-zero error (needed two takes)"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: jz4780: really prevent potential division by zero
Revert "i2c: jz4780: prevent potential division by zero"
i2c: jz4780: prevent potential division by zero
i2c: mux: demux-pinctrl: Update docs to new sysfs-attributes
i2c: mux: demux-pinctrl: Clean up sysfs attributes
i2c: prevent endless uevent loop with CONFIG_I2C_DEBUG_CORE
