With the bridges switching over to drm_bridge_connector, the direct
association between a bridge driver and its connector was lost.
This is mitigated for atomic bridge drivers by the fact you can access
the encoder, and then call drm_atomic_get_old_connector_for_encoder() or
drm_atomic_get_new_connector_for_encoder() with drm_atomic_state.
This was also made easier by providing drm_atomic_state directly to all
atomic hooks bridges can implement.
However, bridge drivers don't have a way to access drm_atomic_state
outside of the modeset path, like from the hotplug interrupt path or any
interrupt handler.
Let's introduce a function to retrieve the connector currently assigned
to an encoder, without using drm_atomic_state, to make these drivers'
life easier.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Co-developed-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-4-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Dumb buffers were not being freed because the GEM reference that was
acquired in gb_surface_define was not dropped like it is in the 2D case.
Dropping this ref uncovered a few additional issues with freeing the
resources associated with dirty tracking in vmw_bo_free/release.
Additionally the TTM object associated with the surface were also leaking
which meant that when the ttm_object_file was closed at process exit the
destructor unreferenced an already destroyed surface.
The solution is to remove the destructor from the vmw_user_surface
associated with the dumb_buffer and immediately unreferencing the TTM
object which his removes it from the ttm_object_file.
This also allows the early return in vmw_user_surface_base_release for the
dumb buffer case to be removed as it should no longer occur.
The chain of references now has the GEM handle(s) owning the dumb buffer.
The GEM handles have a singular GEM reference to the vmw_bo which is
dropped when all handles are closed. When the GEM reference count hits
zero the vmw_bo is freed which then unreferences the surface via
vmw_resource_release in vmw_bo_release.
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123204424.836896-1-ian.forbes@broadcom.com
Apple GPUs support non-linear "GPU-tiled" image layouts. Add modifiers
for these layouts. Mesa requires these modifiers to share non-linear
buffers across processes, but no other userspace or kernel support is
required/expected.
These layouts are notably not used for interchange across hardware
blocks (e.g. with the display controller). There are other layouts for
that but we don't support them either in userspace or kernelspace yet
(even downstream), so we don't add modifiers here.
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310-apple-twiddled-modifiers-v4-1-1ccac9544808@rosenzweig.io
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
crtc->mode is legacy junk and shouldn't really be used with
atomic drivers.
Most (all?) atomic drivers do end up still calling
drm_atomic_helper_update_legacy_modeset_state() at some
point, so crtc->mode does still get populated, and this
does work for now. But now that the modes[] lifetime issues
have been sorted out we can just switch over to the
proper crtc->state->mode.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
drm_client_firmware_config() is currently picking up the current
mode of the crtc via the legacy crtc->mode, which is not supposed
to be used by atomic drivers at all. We can't simply switch over
to the proper crtc->state->mode because we drop the crtc->mutex
(which protects crtc->state) before the mode gets used.
The most straightforward solution to extend the lifetime of
modes[] seem to be to make full copies of the modes.
And with this we can undo also commit 3eadd887db
("drm/client:Fully protect modes[] with dev->mode_config.mutex")
as the lifetime of modes[] no longer has anything to do with
that lock.
v2: Don't try to copy NULL modes
v3: Keep storing pointers and use drm_mode_{duplicate,destroy}()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The new audio code fails to build when sounds support is in a loadable
module but the GPU driver is built-in:
x86_64-linux-ld: zynqmp_dp_audio.c:(.text+0x6a8): undefined reference to `devm_snd_soc_register_card'
x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1bc): undefined reference to `snd_soc_info_volsw'
x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1f0): undefined reference to `snd_soc_get_volsw'
x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1f4): undefined reference to `snd_soc_put_volsw'
Change the Kconfig dependency to disallow the sound support in this
configuration.
Fixes: 3ec5c15793 ("drm: xlnx: zynqmp_dpsub: Add DP audio support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227132036.1136600-1-arnd@kernel.org
This reverts commit 44d2f310f0.
The function drm_sched_job_arm() is indeed the point of no return. The
background is that it is nearly impossible for the driver to correctly
retract the fence and signal it in the order enforced by the dma_fence
framework.
The code in drm_sched_job_cleanup() is for the purpose to cleanup after
the job was armed through drm_sched_job_arm() *and* processed by the
scheduler.
We can certainly improve the documentation, but removing the warning is
clearly not a good idea.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312134400.2176393-1-christian.koenig@amd.com
Importing dma-bufs via PRIME requires a DMA-capable device. Devices on
peripheral busses, such as USB, often cannot perform DMA by themselves.
Without DMA-capable device PRIME import fails. DRM drivers for USB
devices already use a separate DMA device for dma-buf imports. Make the
mechanism generally available.
Besides the case of USB, there are embedded DRM devices without DMA
capability. DMA is performed by a separate controller. DRM drivers should
set this accordingly.
Add the field dma_dev to struct drm_device to refer to the device's DMA
device. For USB this should be the USB controller. Use dma_dev in the
PRIME import helpers, if set.
v2:
- acquire internal reference on dma_dev (Jani)
- add DMA-controller usecase to docs (Maxime)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307080836.42848-2-tzimmermann@suse.de
