When user tries to disconnect a socket and there are more data written
into tcp write queue, we should tell users about this reset reason.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introducing a new type TCP_STATE to handle some reset conditions
appearing in RFC 793 due to its socket state. Actually, we can look
into RFC 9293 which has no discrepancy about this part.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introducing a new type TCP_ABORT_ON_MEMORY for tcp reset reason to handle
out of memory case.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introducing a new type TCP_ABORT_ON_LINGER for tcp reset reason to handle
negative linger value case.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introducing a new type TCP_ABORT_ON_CLOSE for tcp reset reason to handle
the case where more data is unread in closing phase.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-08-06
The first patch is by Frank Li and adds the can-transceiver property
to the flexcan device-tree bindings.
Haibo Chen contributes 2 patches for the flexcan driver to add wakeup
support for the imx95.
The 2 patches by Stefan Mätje for the esd_402_pci driver clean up the
driver and add support for the one-shot mode.
The last 15 patches are by Jimmy Assarsson and add hardware timestamp
support for all devices covered by the kvaser_usb driver.
* tag 'linux-can-next-for-6.12-20240806' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_usb: Rename kvaser_usb_{ethtool,netdev}_ops_hwts to kvaser_usb_{ethtool,netdev}_ops
can: kvaser_usb: Remove struct variables kvaser_usb_{ethtool,netdev}_ops
can: kvaser_usb: Remove KVASER_USB_QUIRK_HAS_HARDWARE_TIMESTAMP
can: kvaser_usb: leaf: Add hardware timestamp support to usbcan devices
can: kvaser_usb: leaf: Store MSB of timestamp
can: kvaser_usb: leaf: Add structs for Tx ACK and clock overflow commands
can: kvaser_usb: leaf: Add hardware timestamp support to leaf based devices
can: kvaser_usb: leaf: kvaser_usb_leaf_tx_acknowledge: Rename local variable
can: kvaser_usb: leaf: Replace kvaser_usb_leaf_m32c_dev_cfg with kvaser_usb_leaf_m32c_dev_cfg_{16,24,32}mhz
can: kvaser_usb: leaf: Assign correct timestamp_freq for kvaser_usb_leaf_imx_dev_cfg_{16,24,32}mhz
can: kvaser_usb: leaf: Add struct for Tx ACK commands
can: kvaser_usb: hydra: Set hardware timestamp on transmitted packets
can: kvaser_usb: hydra: Add struct for Tx ACK commands
can: kvaser_usb: hydra: kvaser_usb_hydra_ktime_from_rx_cmd: Drop {rx_} in function name
can: kvaser_usb: Add helper functions to convert device timestamp into ktime
can: esd_402_pci: Add support for one-shot mode
can: esd_402_pci: Rename esdACC CTRL register macros
can: flexcan: add wakeup support for imx95
dt-bindings: can: fsl,flexcan: move fsl,imx95-flexcan standalone
dt-bindings: can: fsl,flexcan: add common 'can-transceiver' for fsl,flexcan
====================
Link: https://patch.msgid.link/20240806074731.1905378-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Compiling libcxgb_ppm.c results in several sparse warnings:
libcxgb_ppm.c:368:15: warning: incorrect type in assignment (different address spaces)
libcxgb_ppm.c:368:15: expected struct cxgbi_ppm_pool *pools
libcxgb_ppm.c:368:15: got void [noderef] __percpu *_res
libcxgb_ppm.c:374:48: warning: incorrect type in initializer (different address spaces)
libcxgb_ppm.c:374:48: expected void const [noderef] __percpu *__vpp_verify
libcxgb_ppm.c:374:48: got struct cxgbi_ppm_pool *
libcxgb_ppm.c:484:19: warning: incorrect type in assignment (different address spaces)
libcxgb_ppm.c:484:19: expected struct cxgbi_ppm_pool [noderef] __percpu *pool
libcxgb_ppm.c:484:19: got struct cxgbi_ppm_pool *[assigned] pool
libcxgb_ppm.c:511:21: warning: incorrect type in argument 1 (different address spaces)
libcxgb_ppm.c:511:21: expected void [noderef] __percpu *__pdata
libcxgb_ppm.c:511:21: got struct cxgbi_ppm_pool *[assigned] pool
Add __percpu annotation to *pools and *pool percpu pointers and to
ppm_alloc_cpu_pool() function that returns percpu pointer to fix
these warnings.
Compile tested only, but there is no difference in the resulting object file.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240804154635.4249-1-ubizjak@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the PHY of the mido bus is enabled with Wake-on-LAN (WOL),
we cannot suspend the PHY. Although the WOL status has been
checked in phy_suspend(), returning -EBUSY(-16) would cause
the Power Management (PM) to fail to suspend. Since
phy_suspend() is an exported symbol (EXPORT_SYMBOL),
timely error reporting is needed. Therefore, an additional
check is performed here. If the PHY of the mido bus is enabled
with WOL, we skip calling phy_suspend() to avoid PM failure.
From the following logs, it has been observed that the phydev->attached_dev
is NULL, phydev is "stmmac-0:01", it not attached, but it will affect suspend
and resume.The actually attached "stmmac-0:00" will not dpm_run_callback():
mdio_bus_phy_suspend().
init log:
[ 5.932502] YT8521 Gigabit Ethernet stmmac-0:00: attached PHY driver
(mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 5.932512] YT8521 Gigabit Ethernet stmmac-0:01: attached PHY driver
(mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 24.566289] YT8521 Gigabit Ethernet stmmac-0:00: yt8521_read_status,
link down, media: UTP
suspend log:
[ 322.631362] OOM killer disabled.
[ 322.631364] Freezing remaining freezable tasks
[ 322.632536] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 322.632540] printk: Suspending console(s) (use no_console_suspend to debug)
[ 322.633052] YT8521 Gigabit Ethernet stmmac-0:01:
PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x110 [libphy] returns -16
[ 322.633071] YT8521 Gigabit Ethernet stmmac-0:01:
PM: failed to suspend: error -16
[ 322.669699] PM: Some devices failed to suspend, or early wake event detected
[ 322.669949] OOM killer enabled.
[ 322.669951] Restarting tasks ... done.
[ 322.671008] random: crng reseeded on system resumption
[ 322.671014] PM: suspend exit
Add a function that phylib can inquire of the driver whether WoL
has been enabled at the PHY.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Youwan Wang <youwan@nfschina.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240731091537.771391-1-youwan@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current implementation of netpoll in veth devices leads to
suboptimal behavior, as it triggers warnings due to the invocation of
__netif_rx() within a softirq context. This is not compliant with
expected practices, as __netif_rx() has the following statement:
lockdep_assert_once(hardirq_count() | softirq_count());
Given that veth devices typically do not benefit from the
functionalities provided by netpoll, Disable netpoll for veth
interfaces.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240805094012.1843247-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5 PTM cross timestamping support
This patchset by Rahul and Carolina adds PTM (Precision Time Measurement)
support to the mlx5 driver.
PTM is a PCI extended capability introduced by PCI-SIG for providing an
accurate read of the device clock offset without being impacted by
asymmetric bus transfer rates.
The performance of PTM on ConnectX-7 was evaluated using both real-time
(RTC) and free-running (FRC) clocks under traffic and no traffic
conditions. Tests with phc2sys measured the maximum offset values at a 50Hz
rate, with and without PTM.
Results:
1. No traffic
+-----+--------+--------+
| | No-PTM | PTM |
+-----+--------+--------+
| FRC | 125 ns | <29 ns |
+-----+--------+--------+
| RTC | 248 ns | <34 ns |
+-----+--------+--------+
2. With traffic
+-----+--------+--------+
| | No-PTM | PTM |
+-----+--------+--------+
| FRC | 254 ns | <40 ns |
+-----+--------+--------+
| RTC | 255 ns | <45 ns |
+-----+--------+--------+
v2: https://lore.kernel.org/d1dba3e1-2ecc-4fdf-a23b-7696c4bccf45@gmail.com
====================
Link: https://patch.msgid.link/20240730134055.1835261-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add hardware timestamp support for all usbcan based devices (M16C).
The usbcan firmware is slightly different compared to the other Kvaser USB
interfaces:
- The timestamp is provided by a 32-bit counter, with 10us resolution.
Hence, the hardware timestamp will wrap after less than 12 hours.
- Each Rx CAN or Tx ACK command only contains the 16-bits LSB of the
timestamp counter.
- The 16-bits MSB are sent in an asynchronous event (command), if any
change occurred in the MSB since the last event.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-13-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rename macros to use for esdACC CTRL register access to match the
internal documentation and to make the macro prefix consistent.
- ACC_CORE_OF_CTRL_MODE -> ACC_CORE_OF_CTRL
Makes the name match the documentation.
- ACC_REG_CONTROL_MASK_MODE_ -> ACC_REG_CTRL_MASK_
ACC_REG_CONTROL_MASK_ -> ACC_REG_CTRL_MASK_
Makes the prefix consistent for macros describing masks in the same
register (CTRL).
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://lore.kernel.org/all/20240717214409.3934333-2-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
iMX95 defines a bit in GPR that sets/unsets the IPG_STOP signal to the
FlexCAN module, controlling its entry into STOP mode. Wakeup should work
even if FlexCAN is in STOP mode.
Due to iMX95 architecture design, the A-Core cannot access GPR; only the
system manager (SM) can configure GPR. To support the wakeup feature,
follow these steps:
- For suspend:
1) During Linux suspend, when CAN suspends, do nothing for GPR and keep
CAN-related clocks on.
2) In ATF, check whether CAN needs to support wakeup; if yes, send a
request to SM through the SCMI protocol.
3) In SM, configure the GPR and unset IPG_STOP.
4) A-Core suspends.
- For wakeup and resume:
1) A-Core wakeup event arrives.
2) In SM, deassert IPG_STOP.
3) Linux resumes.
Add a new fsl_imx95_devtype_data and FLEXCAN_QUIRK_SETUP_STOP_MODE_SCMI to
reflect this.
Reviewed-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/all/20240731-flexcan-v4-2-82ece66e5a76@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Update the MODULE_AUTHOR for netconsole, according to the format, as
stated in module.h:
use "Name <email>" or just "Name"
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit implements downshift feature in vsc73xx family phys.
By default downshift was enabled with maximum tries.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
