This fixes the following issue discovered by code review:
after vqs have been created, a buggy device can send an interrupt.
A control vq callback will then try to schedule control_work which has
not been initialized yet. Similarly for config interrupt. Further, in
and out vq callbacks invoke find_port_by_vq which attempts to take
ports_lock which also has not been initialized.
To fix, init all locks and work before creating vqs.
Message-ID: <ad982e975a6160ad110c623c016041311ca15b4f.1726511547.git.mst@redhat.com>
Fixes: 17634ba255 ("virtio: console: Add a new MULTIPORT feature, support for generic ports")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Setting event_triggered from the interrupt handler
is fundamentally racy. There are races of 2 types:
1. vq processing can read false value while interrupt
triggered and set it to true.
result will be a bit of extra work when disabling cbs, no big deal.
1. vq processing can set false value then interrupt
immediately sets true value
since interrupt then triggers a callback which will
process buffers, this is also not an issue.
However, looks like KCSAN can not figure all this out, and warns about
the race between the write and the read. Tag the access data_racy for
now. We should probably look at ways to make this more
straight-forwardly correct.
Message-ID: <6bdd771a4fb7625a9227971b3cf4745c34c31a32.1726153334.git.mst@redhat.com>
Reported-by: syzbot+8a02104389c2e0ef5049@syzkaller.appspotmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Marco Elver <elver@google.com>
When the driver needs to send new packets to the device, it always
queues the new sk_buffs into an intermediate queue (send_pkt_queue)
and schedules a worker (send_pkt_work) to then queue them into the
virtqueue exposed to the device.
This increases the chance of batching, but also introduces a lot of
latency into the communication. So we can optimize this path by
adding a fast path to be taken when there is no element in the
intermediate queue, there is space available in the virtqueue,
and no other process that is sending packets (tx_lock held).
The following benchmarks were run to check improvements in latency and
throughput. The test bed is a host with Intel i7-10700KF CPU @ 3.80GHz
and L1 guest running on QEMU/KVM with vhost process and all vCPUs
pinned individually to pCPUs.
- Latency
Tool: Fio version 3.37-56
Mode: pingpong (h-g-h)
Test runs: 50
Runtime-per-test: 50s
Type: SOCK_STREAM
In the following fio benchmark (pingpong mode) the host sends
a payload to the guest and waits for the same payload back.
fio process pinned both inside the host and the guest system.
Before: Linux 6.9.8
Payload 64B:
1st perc. overall 99th perc.
Before 12.91 16.78 42.24 us
After 9.77 13.57 39.17 us
Payload 512B:
1st perc. overall 99th perc.
Before 13.35 17.35 41.52 us
After 10.25 14.11 39.58 us
Payload 4K:
1st perc. overall 99th perc.
Before 14.71 19.87 41.52 us
After 10.51 14.96 40.81 us
- Throughput
Tool: iperf-vsock
The size represents the buffer length (-l) to read/write
P represents the number of parallel streams
P=1
4K 64K 128K
Before 6.87 29.3 29.5 Gb/s
After 10.5 39.4 39.9 Gb/s
P=2
4K 64K 128K
Before 10.5 32.8 33.2 Gb/s
After 17.8 47.7 48.5 Gb/s
P=4
4K 64K 128K
Before 12.7 33.6 34.2 Gb/s
After 16.9 48.1 50.5 Gb/s
The performance improvement is related to this optimization,
I used a ebpf kretprobe on virtio_transport_send_skb to check
that each packet was sent directly to the virtqueue
Co-developed-by: Marco Pinna <marco.pinn95@gmail.com>
Signed-off-by: Marco Pinna <marco.pinn95@gmail.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Message-Id: <20240730-pinna-v4-2-5c9179164db5@outlook.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and this can increase over all security.
```
[Before]
text data bss dec hex filename
5974 1008 96 7078 1ba6 drivers/firmware/qemu_fw_cfg.o
[After]
text data bss dec hex filename
6038 944 96 7078 1ba6 drivers/firmware/qemu_fw_cfg.o
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Message-Id: <20240904011743.2010319-1-lihongbo22@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, when a new MR is set up, the old MR is deleted. MR deletion
is about 30-40% the time of MR creation. As deleting the old MR is not
important for the process of setting up the new MR, this operation
can be postponed.
This series adds a workqueue that does MR garbage collection at a later
point. If the MR lock is taken, the handler will back off and
reschedule. The exception during shutdown: then the handler must
not postpone the work.
Note that this is only a speculative optimization: if there is some
mapping operation that is triggered while the garbage collector handler
has the lock taken, this operation it will have to wait for the handler
to finish.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There's currently not a lot of action happening during
the init/destroy of MR resources. But more will be added
in the upcoming patches.
As the mr mutex lock init/destroy has been moved to these
new functions, the lifetime has now shifted away from
mlx5_vdpa_alloc_resources() / mlx5_vdpa_free_resources()
into these new functions. However, the lifetime at the
outer scope remains the same:
mlx5_vdpa_dev_add() / mlx5_vdpa_dev_free()
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the async interface to issue MTT MKEY creation.
Extra care is taken at the allocation of FW input commands
due to the MTT tables having variable sizes depending on
MR.
The indirect MKEY is still created synchronously at the
end as the direct MKEYs need to be filled in.
This makes create_user_mr() 3-5x faster, depending on
the size of the MR.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-vsock driver is already under VM SOCKETS (AF_VSOCK),
managed pricipally with the net tree, and VIRTIO AND VHOST
VSOCK DRIVER. However, changes that only affect the virtio part
usually go with Michael's tree, so let's also put the driver in
the VIRTIO CORE section to have its maintainers in CC for changes
to the virtio-vsock driver.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240829143757.85844-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Introduce sysfs entries to provide visibility to the multiple queues
used by the Virtio FS device. This enhancement allows users to query
information about these queues.
Specifically, add two sysfs entries:
1. Queue name: Provides the name of each queue (e.g. hiprio/requests.8).
2. CPU list: Shows the list of CPUs that can process requests for each
queue.
The CPU list feature is inspired by similar functionality in the block
MQ layer, which provides analogous sysfs entries for block devices.
These new sysfs entries will improve observability and aid in debugging
and performance tuning of Virtio FS devices.
Reviewed-by: Idan Zach <izach@nvidia.com>
Reviewed-by: Shai Malin <smalin@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20240825130716.9506-2-mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new helper function virtio_fs_put_locked to encapsulate the
common pattern of releasing a virtio_fs reference while holding a lock.
The existing virtio_fs_put helper will be used to release a virtio_fs
reference while not holding a lock.
Also add an assertion in case the lock is not taken when it should.
Reviewed-by: Idan Zach <izach@nvidia.com>
Reviewed-by: Shai Malin <smalin@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20240825130716.9506-1-mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
change_num_qps() is still suspending/resuming VQs one by one.
This change switches to parallel suspend/resume.
When increasing the number of queues the flow has changed a bit for
simplicity: the setup_vq() function will always be called before
resume_vqs(). If the VQ is initialized, setup_vq() will exit early. If
the VQ is not initialized, setup_vq() will create it and resume_vqs()
will resume it.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-11-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Unregistering notifiers is a costly operation. Instead of removing
the notifiers during device suspend and adding them back at resume,
simply ignore the call when the device is suspended.
At resume time call queue_link_work() to make sure that the device state
is propagated in case there were changes.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~13 ms to ~2.5 ms.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Currently device resume works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device resume.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device resume time is reduced from
~16 ms to ~4.5 ms.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Currently device suspend works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device suspend:
1) Suspend all active vqs parallel.
2) Query suspended vqs in parallel.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~37 ms to ~13 ms.
A later patch will remove the link unregister operation which will make
it even faster.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Switch firmware vq modify command to be issued via the async API to
allow future parallelization. The new refactored function applies the
modify on a range of vqs and waits for their execution to complete.
For now the command is still used in a serial fashion. A later patch
will switch to modifying multiple vqs in parallel.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Switch firmware vq query command to be issued via the async API to
allow future parallelization.
For now the command is still serial but the infrastructure is there
to issue commands in parallel, including ratelimiting the number
of issued async commands to firmware.
A later patch will switch to issuing more commands at a time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Introduce a new function mlx5_vdpa_exec_async_cmds() which
wraps the mlx5_core async firmware command API in a way
that will be used to parallelize certain operation in this
driver.
The wrapper deals with the case when mlx5_cmd_exec_cb() returns
EBUSY due to the command being throttled.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-4-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Currently, commands that qualify as throttled can't be used via the
async API. That's due to the fact that the throttle semaphore can sleep
but the async API can't.
This patch allows throttling in the async API by using the tentative
variant of the semaphore and upon failure (semaphore at 0) returns EBUSY
to signal to the caller that they need to wait for the completion of
previously issued commands.
Furthermore, make sure that the semaphore is released in the callback.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Add the function to support setting the MAC address.
For vdpa/mlx5, the function will use mlx5_mpfs_add_mac
to set the mac address
Tested in ConnectX-6 Dx device
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240731031653.1047692-4-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add the function to support setting the MAC address.
For vdpa_sim_net, the driver will write the MAC address
to the config space, and other devices can implement
their own functions to support this.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240731031653.1047692-3-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add new UAPI to support the mac address from vdpa tool
Function vdpa_nl_cmd_dev_attr_set_doit() will get the
new MAC address from the vdpa tool and then set it to the device.
The usage is: vdpa dev set name vdpa_name mac **:**:**:**:**:**
Here is example:
root@L1# vdpa -jp dev config show vdpa0
{
"config": {
"vdpa0": {
"mac": "82:4d:e9:5d:d7:e6",
"link ": "up",
"link_announce ": false,
"mtu": 1500
}
}
}
root@L1# vdpa dev set name vdpa0 mac 00:11:22:33:44:55
root@L1# vdpa -jp dev config show vdpa0
{
"config": {
"vdpa0": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 1500
}
}
}
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20240731031653.1047692-2-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Expose memory scan/reclaim information to the host side via virtio
balloon device.
Now we have a metric to analyze the memory performance:
y: counter increases
n: counter does not changes
h: the rate of counter change is high
l: the rate of counter change is low
OOM: VIRTIO_BALLOON_S_OOM_KILL
STALL: VIRTIO_BALLOON_S_ALLOC_STALL
ASCAN: VIRTIO_BALLOON_S_SCAN_ASYNC
DSCAN: VIRTIO_BALLOON_S_SCAN_DIRECT
ARCLM: VIRTIO_BALLOON_S_RECLAIM_ASYNC
DRCLM: VIRTIO_BALLOON_S_RECLAIM_DIRECT
- OOM[y], STALL[*], ASCAN[*], DSCAN[*], ARCLM[*], DRCLM[*]:
the guest runs under really critial memory pressure
- OOM[n], STALL[h], ASCAN[*], DSCAN[l], ARCLM[*], DRCLM[l]:
the memory allocation stalls due to cgroup, not the global memory
pressure.
- OOM[n], STALL[h], ASCAN[*], DSCAN[h], ARCLM[*], DRCLM[h]:
the memory allocation stalls due to global memory pressure. The
performance gets hurt a lot. A high ratio between DRCLM/DSCAN shows
quite effective memory reclaiming.
- OOM[n], STALL[h], ASCAN[*], DSCAN[h], ARCLM[*], DRCLM[l]:
the memory allocation stalls due to global memory pressure.
the ratio between DRCLM/DSCAN gets low, the guest OS is thrashing
heavily, the serious case leads poor performance and difficult
trouble shooting. Ex, sshd may block on memory allocation when
accepting new connections, a user can't login a VM by ssh command.
- OOM[n], STALL[n], ASCAN[h], DSCAN[n], ARCLM[l], DRCLM[n]:
the low ratio between ARCLM/ASCAN shows that the guest tries to
reclaim more memory, but it can't. Once more memory is required in
future, it will struggle to reclaim memory.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-5-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the guest OS runs under critical memory pressure, the guest
starts to kill processes. A guest monitor agent may scan 'oom_kill'
from /proc/vmstat, and reports the OOM KILL event. However, the agent
may be killed and we will loss this critical event(and the later
events).
For now we can also grep for magic words in guest kernel log from host
side. Rather than this unstable way, virtio balloon reports OOM-KILL
invocations instead.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-3-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If a pmem device is in a bad status, the driver side could wait for
host ack forever in virtio_pmem_flush(), causing the system to hang.
So add a status check in the beginning of virtio_pmem_flush() to return
early if the device is not activated.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Message-Id: <20240826215313.2673566-1-philipchen@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com
We used to call irq_bypass_unregister_producer() in
vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the
token pointer is still valid or not.
Actually, we use the eventfd_ctx as the token so the life cycle of the
token should be bound to the VHOST_SET_VRING_CALL instead of
vhost_vdpa_setup_vq_irq() which could be called by set_status().
Fixing this by setting up irq bypass producer's token when handling
VHOST_SET_VRING_CALL and un-registering the producer before calling
vhost_vring_ioctl() to prevent a possible use after free as eventfd
could have been released in vhost_vring_ioctl(). And such registering
and unregistering will only be done if DRIVER_OK is set.
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 2cf1ba9a4d ("vhost_vdpa: implement IRQ offloading in vhost_vdpa")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240816031900.18013-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull smb client fixes from Steve French:
- copy_file_range fix
- two read fixes including read past end of file rc fix and read retry
crediting fix
- falloc zero range fix
* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
cifs: Fix copy offload to flush destination region
netfs, cifs: Fix handling of short DIO read
cifs: Fix lack of credit renegotiation on read retry
Push bcachefs fixes from Kent Overstreet:
"The data corruption in the buffered write path is troubling; inode
lock should not have been able to cause that...
- Fix a rare data corruption in the rebalance path, caught as a nonce
inconsistency on encrypted filesystems
- Revert lockless buffered write path
- Mark more errors as autofix"
* tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs:
bcachefs: Mark more errors as autofix
bcachefs: Revert lockless buffered IO path
bcachefs: Fix bch2_extents_match() false positive
bcachefs: Fix failure to return error in data_update_index_update()
errors that are known to always be safe to fix should be autofix: this
should be most errors even at this point, but that will need some
thorough review.
note that errors are still logged in the superblock, so we'll still know
that they happened.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a report of data corruption on nixos when building installer
images.
https://github.com/NixOS/nixpkgs/pull/321055#issuecomment-2184131334
It seems that writes are being dropped, but only when issued by QEMU,
and possibly only in snapshot mode. It's undetermined if it's write
calls are being dropped or dirty folios.
Further testing, via minimizing the original patch to just the change
that skips the inode lock on non appends/truncates, reveals that it
really is just not taking the inode lock that causes the corruption: it
has nothing to do with the other logic changes for preserving write
atomicity in corner cases.
It's also kernel config dependent: it doesn't reproduce with the minimal
kernel config that ktest uses, but it does reproduce with nixos's distro
config. Bisection the kernel config initially pointer the finger at page
migration or compaction, but it appears that was erroneous; we haven't
yet determined what kernel config option actually triggers it.
Sadly it appears this will have to be reverted since we're getting too
close to release and my plate is full, but we'd _really_ like to fully
debug it.
My suspicion is that this patch is exposing a preexisting bug - the
inode lock actually covers very little in IO paths, and we have a
different lock (the pagecache add lock) that guards against races with
truncate here.
Fixes: 7e64c86cdc ("bcachefs: Buffered write path now can avoid the inode lock")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull misc fixes from Guenter Roeck.
These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
apparmor: fix policy_unpack_test on big endian systems
Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
microblaze: don't treat zero reserved memory regions as error
Pull power sequencing fix from Bartosz Golaszewski:
"A follow-up fix for the power sequencing subsystem. It turned out the
previous fix for this driver was incomplete and broke the WLAN support
on some platforms. This addresses the issue.
- set the direction of the wlan-enable GPIO to output after
requesting it as-is"
* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: set the wlan-enable GPIO to output
Commit a9aaf1ff88 ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.
Fixes: a9aaf1ff88 ("power: sequencing: request the WLAN enable GPIO as-is")
Link: https://lore.kernel.org/r/20240823115500.37280-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add MeiG Smart SRM825L
usb: cdnsp: fix for Link TRB with TC
usb: dwc3: st: add missing depopulate in probe error path
usb: dwc3: st: fix probed platform device ref count on probe error path
usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
usb: typec: fsa4480: Relax CHIP_ID check
usb: dwc3: xilinx: add missing depopulate in probe error path
usb: dwc3: omap: add missing depopulate in probe error path
dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
usb: gadget: uvc: queue pump work in uvcg_video_enable()
cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
usb: dwc3: core: Prevent USB core invalid event buffer address access
MAINTAINERS: Mark UVC gadget driver as orphan
Pull SCSI fixes from James Bottomley:
"Minor fixes only.
The sd.c one ignores a sync cache request if format is in progress
which can happen if formatting a drive across suspend/resume"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
scsi: aacraid: Fix double-free on probe failure
scsi: lpfc: Fix overflow build issue
Pull nfsd fix from Chuck Lever:
- One more write delegation fix
* tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease
Pull xfs fixes from Chandan Babu:
- Do not call out v1 inodes with non-zero di_nlink field as being
corrupt
- Change xfs_finobt_count_blocks() to count "free inode btree" blocks
rather than "inode btree" blocks
- Don't report the number of trimmed bytes via FITRIM because the
underlying storage isn't required to do anything and failed discard
IOs aren't reported to the caller anyway
- Fix incorrect setting of rm_owner field in an rmap query
- Report missing disk offset range in an fsmap query
- Obtain m_growlock when extending realtime section of the filesystem
- Reset rootdir extent size hint after extending realtime section of
the filesystem
* tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reset rootdir extent size hint after growfsrt
xfs: take m_growlock when running growfsrt
xfs: Fix missing interval for missing_owner in xfs fsmap
xfs: use XFS_BUF_DADDR_NULL for daddrs in getfsmap code
xfs: Fix the owner setting issue for rmap query in xfs fsmap
xfs: don't bother reporting blocks trimmed via FITRIM
xfs: xfs_finobt_count_blocks() walks the wrong btree
xfs: fix folio dirtying for XFILE_ALLOC callers
xfs: fix di_onlink checking for V1/V2 inodes
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
