Initialize devlink health dump framework for the qlge driver so the
coredump could be done via devlink.
struct qlge_adapter is now used as the private data structure of
struct devlink so it could exist independently of struct net_device
and devlink reload could be supported in the future. The private data
of PCIe driver now points to qlge_adapter.
Since devlink_alloc will zero out struct qlge_adapter, memset in
qlge_init_device is not necessary.
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-3-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original driver, which can be seen at
commit 42f24d9d44 ("staging: regulator: add a regulator driver for HiSilicon 6421v600 SPMI PMIC")
had a complex logic to ensure that there won't be multiple power
enable/disable commands running at the same time. At the original
logic, it were ensured that:
- a next power up/down would wait for at least the on/off period;
- an extra delay would be granted. It turns that such extra delay
has a value of zero, but it was relying on gettimeofday()
call, which can take some time.
This was later simplified, but there are still some possible
issues. In order to avoid that, let's simply add a delay
to wait for the power up line to stabilize after powering up
a device.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6733dac9813ba6688def404142cb7b964accf758.1611212783.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interrupt support for Advantech PCI-1730 currrently supports only
rising edge inputs for the trigger sources. Each of four interrupt
sources (each with its own Comedi subdevice) can be set to trigger on
either a rising edge or a falling edge. Add support for choosing the
edge during set-up of the asynchronous command for the subdevice, using
the `CR_INVERT` bit of `scan_begin_arg` to indicate falling edge when
set, or rising edge when clear. Also allow the `CR_EDGE` bit to be set,
but ignore it. All other bits of `scan_begin_arg` must be zero.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210118144359.378730-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the Advantech PCI-1730, four digital inputs (DI0, DI1, IDI0 and IDI1)
can be used as external interrupt sources. Each input can be programmed
to latch an interrupt bit on either a rising edge or a falling edge (but
not both).
Add a new Comedi subdevice for each interrupt source, supporting the
asynchronous command interface. Subdevices 5, 6, 7 and 8 are for
interrupt sources DI0, DI1, IDI0 and IDI1. They each write the state of
16 digital inputs to the subdevice's data buffer each time the
corresponding interrupt occurs. (For DI0 and DI1, use the 16
non-isolated digital inputs. For IDI0 and IDI1, use the 16 isolated
digital inputs.)
Currently, only rising edge triggers are supported. Support could be
added for the PCI-1733 and PCI-1736.
Signed-off-by: Bernd Harries <bha@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210118144359.378730-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the ADLink PCI-7230, digital input channels 0 and 1 can be used as
external interrupt sources. A rising edge on each input latches a
corresponding local interrupt input of the PCI interface chip. Writing
a "clear IRQ" register clears both latches.
Add a new Comedi subdevice for each interrupt source, supporting the
asynchronous command interface. This writes the state of the 16 digital
inputs to the subdevice's data buffer each time the corresponding
interrupt occurs.
This could be adapted to support the PCI-7233, PCI-7432 and PCI-7433
boards too. They all have two interrupt sources, although for PCI-7233
each interrupt source is triggered by a change of state of 16 digital
inputs (0-15 and 16-31). The "clear IRQ" register is at a different
offset for some boards.
Signed-off-by: Bernd Harries <bha@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210118141829.376505-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull io_uring fixes from Jens Axboe:
"Still need a final cancelation fix that isn't quite done done,
expected in the next day or two. That said, this contains:
- Wakeup fix for IOPOLL requests
- SQPOLL split close op handling fix
- Ensure that any use of io_uring fd itself is marked as inflight
- Short non-regular file read fix (Pavel)
- Fix up bad false positive warning (Pavel)
- SQPOLL fixes (Pavel)
- In-flight removal fix (Pavel)"
* tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
io_uring: account io_uring internal files as REQ_F_INFLIGHT
io_uring: fix sleeping under spin in __io_clean_op
io_uring: fix short read retries for non-reg files
io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
io_uring: fix skipping disabling sqo on exec
io_uring: fix uring_flush in exit_files() warning
io_uring: fix false positive sqo warning on flush
io_uring: iopoll requests should also wake task ->in_idle state
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- fix a status code in nvmet (Chaitanya Kulkarni)
- avoid double completions in nvme-rdma/nvme-tcp (Chao Leng)
- fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen)
- fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar)
- fix a double DMA unmap in nvme-pci
- lightnvm error path leak fix (Pan)
- MD pull request from Song:
- Flush request fix (Xiao)
* tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
lightnvm: fix memory leak when submit fails
nvme-pci: fix error unwind in nvme_map_data
nvme-pci: refactor nvme_unmap_data
md: Set prev_flush_start and flush_bio in an atomic way
nvmet: set right status on error in id-ns handler
nvme-pci: allow use of cmb on v1.4 controllers
nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout
nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout
nvme: check the PRINFO bit before deciding the host buffer length
Merge misc fixes from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
memory-failure, and highmem), ubsan, proc, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add a couple more files to the Clang/LLVM section
proc_sysctl: fix oops caused by incorrect command parameters
powerpc/mm/highmem: use __set_pte_at() for kmap_local()
mips/mm/highmem: use set_pte() for kmap_local()
mm/highmem: prepare for overriding set_pte_at()
sparc/mm/highmem: flush cache and TLB
mm: fix page reference leak in soft_offline_page()
ubsan: disable unsigned-overflow check for i386
kasan, mm: fix resetting page_alloc tags for HW_TAGS
kasan, mm: fix conflicts with init_on_alloc/free
kasan: fix HW_TAGS boot parameters
kasan: fix incorrect arguments passing in kasan_add_zero_shadow
kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
mm: fix numa stats for thp migration
mm: memcg: fix memcg file_dirty numa stat
mm: memcg/slab: optimize objcg stock draining
mm: fix initialization of struct page for holes in memory layout
x86/setup: don't remove E820_TYPE_RAM for pfn 0
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.11-rc5:
- habanalabs driver fixes
- phy driver fixes
- hwtracing driver fixes
- rtsx cardreader driver fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: init value of aspm_enabled
habanalabs: disable FW events on device removal
habanalabs: fix backward compatibility of idle check
habanalabs: zero pci counters packet before submit to FW
intel_th: pci: Add Alder Lake-P support
stm class: Fix module init return on allocation failure
habanalabs: prevent soft lockup during unmap
habanalabs: fix reset process in case of failures
habanalabs: fix dma_addr passed to dma_mmap_coherent
phy: mediatek: allow compile-testing the dsi phy
phy: cpcap-usb: Fix warning for missing regulator_disable
PHY: Ingenic: fix unconditional build of phy-ingenic-usb
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.11-rc5 that resolve some
reported problems:
- revert of a -rc1 patch that was causing problems with some machines
- device link device name collision problem fix (busses only have to
name devices unique to their bus, not unique to all busses)
- kernfs splice bugfixes to resolve firmware loading problems for
Qualcomm systems.
- other tiny driver core fixes for minor issues reported.
All of these have been in linux-next with no reported problems"
* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix device link device name collision
driver core: Extend device_is_dependent()
kernfs: wire up ->splice_read and ->splice_write
kernfs: implement ->write_iter
kernfs: implement ->read_iter
Revert "driver core: Reorder devices on successful probe"
Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
drivers core: Free dma_range_map when driver probe failed
Pull staging/IIO driver fixes from Greg KH:
"Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
problems.
Nothing major, just a few small fixes, all of these have been in
linux-next for a while and full details are in the shortlog"
* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
iio: ad5504: Fix setting power-down state
counter:ti-eqep: remove floor
drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
iio: sx9310: Off by one in sx9310_read_thresh()
Pull tty/serial fixes from Greg KH:
"Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
problems:
- two patches to fix up writing to ttys with splice
- mvebu-uart driver fix for reported problem
All of these have been in linux-next with no reported problems"
* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix up hung_up_tty_write() conversion
tty: implement write_iter
serial: mvebu-uart: fix tx lost characters at power off
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.11-rc5. They resolve:
- xhci issues for some reported problems
- ehci driver issue for one specific device
- USB gadget fixes for some reported problems
- cdns3 driver fixes for issues reported
- MAINTAINERS file update
- thunderbolt minor fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: bdc: Make bdc pci driver depend on BROKEN
xhci: tegra: Delay for disabling LFPS detector
xhci: make sure TRB is fully written before giving it to the controller
usb: udc: core: Use lock when write to soft_connect
USB: gadget: dummy-hcd: Fix errors in port-reset handling
usb: gadget: aspeed: fix stop dma register setting.
USB: ehci: fix an interrupt calltrace error
ehci: fix EHCI host controller initialization sequence
MAINTAINERS: update Peter Chen's email address
thunderbolt: Drop duplicated 0x prefix from format string
MAINTAINERS: Update address for Cadence USB3 driver
usb: cdns3: imx: improve driver .remove API
usb: cdns3: imx: fix can't create core device the second time issue
usb: cdns3: imx: fix writing read-only memory issue
The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val). If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.
For example:
"hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
triggered. The call stack is as follows:
Kernel command line: .... hung_task_panic
......
Call trace:
__pi_strlen+0x10/0x98
parse_args+0x278/0x344
do_sysctl_args+0x8c/0xfc
kernel_init+0x5c/0xf4
ret_from_fork+0x10/0x30
To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().
Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com
Fixes: 3db978d480 ("kernel/sysctl: support setting sysctl parameters from kernel command line")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building ubsan kernels even for compile-testing introduced these
warnings in my randconfig environment:
crypto/blake2b_generic.c:98:13: error: stack frame size of 9636 bytes in function 'blake2b_compress' [-Werror,-Wframe-larger-than=]
static void blake2b_compress(struct blake2b_state *S,
crypto/sha512_generic.c:151:13: error: stack frame size of 1292 bytes in function 'sha512_generic_block_fn' [-Werror,-Wframe-larger-than=]
static void sha512_generic_block_fn(struct sha512_state *sst, u8 const *src,
lib/crypto/curve25519-fiat32.c:312:22: error: stack frame size of 2180 bytes in function 'fe_mul_impl' [-Werror,-Wframe-larger-than=]
static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
lib/crypto/curve25519-fiat32.c:444:22: error: stack frame size of 1588 bytes in function 'fe_sqr_impl' [-Werror,-Wframe-larger-than=]
static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10])
Further testing showed that this is caused by
-fsanitize=unsigned-integer-overflow, but is isolated to the 32-bit x86
architecture.
The one in blake2b immediately overflows the 8KB stack area
architectures, so better ensure this never happens by disabling the
option for 32-bit x86.
Link: https://lkml.kernel.org/r/20210112202922.2454435-1-arnd@kernel.org
Link: https://lore.kernel.org/lkml/20201230154749.746641-1-arnd@kernel.org/
Fixes: d0a3ac549f ("ubsan: enable for all*config builds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Marco Elver <elver@google.com>
Cc: George Popescu <georgepope@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
