This is the new API for allocating DRM bridges.
This conversion was missed during the initial conversion of all bridges to
the new API. Thus all kernels with commit 94d50c1a2c ("drm/bridge:
get/put the bridge reference in drm_bridge_attach/detach()") and using this
driver now warn due to drm_bridge_attach() incrementing the refcount, which
is not initialized without using devm_drm_bridge_alloc() for allocation.
To make the conversion simple and straightforward without messing up with
the drmm_simple_encoder_alloc(), move the struct drm_bridge from struct
imx_parallel_display_encoder to struct imx_parallel_display.
Also remove the 'struct imx_parallel_display *pd' from struct
imx_parallel_display_encoder, not needed anymore.
Fixes: 94d50c1a2c ("drm/bridge: get/put the bridge reference in drm_bridge_attach/detach()")
Reported-by: Ernest Van Hoecke <ernestvanhoecke@gmail.com>
Closes: https://lore.kernel.org/all/hlf4wdopapxnh4rekl5s3kvoi6egaga3lrjfbx6r223ar3txri@3ik53xw5idyh/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Link: https://patch.msgid.link/20251014-drm-bridge-alloc-imx-ipuv3-v1-1-a1bb1dcbff50@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The dpu_plane_virtual_assign_resources function might fail if there is
no suitable SSPP(s) for the plane. This leaves sspp field in plane
state uninitialized and later leads to NULL dereference during commit:
Call trace:
_dpu_crtc_blend_setup+0x194/0x620 [msm] (P)
dpu_crtc_atomic_begin+0xe4/0x240 [msm]
drm_atomic_helper_commit_planes+0x88/0x358
msm_atomic_commit_tail+0x1b4/0x8b8 [msm]
commit_tail+0xa8/0x1b0
drm_atomic_helper_commit+0x180/0x1a0
drm_atomic_commit+0x94/0xe0
drm_mode_atomic_ioctl+0xa88/0xd60
drm_ioctl_kernel+0xc4/0x138
drm_ioctl+0x364/0x4f0
__arm64_sys_ioctl+0xac/0x108
invoke_syscall.constprop.0+0x48/0x100
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x30/0xe0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
Fixes: 3ed12a3664 ("drm/msm/dpu: allow sharing SSPP between planes")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/681916/
Link: https://lore.kernel.org/r/20251017-b4-dpu-fixes-v1-2-40ce5993eeb6@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When in bonded DSI mode, only one PLL in one DSI PHY is used for both
DSI PHYs, meaning that parents of the secondary DSI PHY will use the
primary DSI PHY PLL as parent.
In this case the primary DSI PHY PLL will be set even if the primary
DSI PHY is not yet enabled. The DSI PHY code has support for this
particular use-case and will handle the fact the PLL was already
set when initializing the primary DSI PHY.
By introducing a protected variable pll_enable_cnt in the commit
cb55f39bf7 ("drm/msm/dsi/phy: Fix reading zero as PLL rates when unprepared"),
this variable is only initially set to 1 when the DSI PHY is initialized
making it impossible to set the PLL before, breaking the bonded DSI
use case by returning 0 when setting the PLL from the secondary DSI
PHY driver and skipping the correct clocks initialization.
But since it was already possible to set the PLL without enabling
the DSI PHY, just drop the pll_enable_cnt setting from the PHY
enable/disable and simply increment/decrement the pll_enable_cnt
variable from the dsi_pll_enable/disable_pll_bias to make sure any
PLL operation is done with the PLL BIAS enabled.
Fixes: cb55f39bf7 ("drm/msm/dsi/phy: Fix reading zero as PLL rates when unprepared")
Closes: https://lore.kernel.org/all/50a49d72-2b1e-471d-b0c4-d5a0b38b2a21@linaro.org/
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/683688/
Link: https://lore.kernel.org/r/20251027-topic-sm8x50-fix-dsi-bonded-v1-1-a477cd3f907d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18aafc59b1 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92b0a6ae66)
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18edef19ea ("drm/amd/powerplay: implement fw image related smu interface for Fiji.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c52238c9fb)
'table_index' is a variable defined by the smu driver (kmd)
'table_id' is a variable defined by the hw smu (pmfw)
This code should use table_index as a bounds check.
Fixes: caad2613dc ("drm/amd/powerplay: move table setting common code to smu_cmn.c")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fca0c66b22)
Before commit 33056a97ae ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
checked the low-power debug flag before calling
dpp3_power_on_blnd_lut(false).
After commit 33056a97ae ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
unconditionally calls dpp3_power_on_blnd_lut(false). The BLNDGAM power
helper writes BLNDGAM_MEM_PWR_FORCE when CM low-power is disabled, causing
immediate SRAM power toggles instead of deferring at vupdate. This can
disrupt atomic color/LUT sequencing during transitions between
direct scanout and composition within gamescope's DRM backend on
Steam Deck OLED.
To fix this, leave the BLNDGAM power state unchanged when low-power is
disabled, matching dpp3_power_on_hdr3dlut and dpp3_power_on_shaper.
Fixes: 33056a97ae ("drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`")
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 13ff4f63fc)
Cc: stable@vger.kernel.org
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() drm_put_dev()'ing to trigger it to be free'd
should be done by devres.
However, drm_put_dev() is still in the probe error and device remove
paths. When the driver fails to probe warnings like the following are
shown because devres is trying to drm_put_dev() after the driver
already did it.
[ 5.642230] radeon 0000:01:05.0: probe with driver radeon failed with error -22
[ 5.649605] ------------[ cut here ]------------
[ 5.649607] refcount_t: underflow; use-after-free.
[ 5.649620] WARNING: CPU: 0 PID: 357 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
Fixes: a9ed2f052c ("drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3eb8c0b4c0)
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() rdev is managed by devres and we shouldn't be calling
kfree() on it.
This fixes things exploding if the driver probe fails and devres cleans up
the rdev after we already free'd it.
Fixes: a9ed2f052c ("drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 16c0681617)
[Why]
Newer VPE microcode has functionality that will decrease DPM level
only when a workload has run for 2 or more seconds. If VPE is turned
off before this DPM decrease and the PMFW doesn't reset it when
power gating VPE, the SOC can get stuck with a higher DPM level.
This can happen from amdgpu's ring buffer test because it's a short
quick workload for VPE and VPE is turned off after 1s.
[How]
In idle handler besides checking fences are drained check PMFW version
to determine if it will reset DPM when power gating VPE. If PMFW will
not do this, then check VPE DPM level. If it is not DPM0 reschedule
delayed work again until it is.
v2: squash in return fix (Alex)
Cc: Peyton.Lee@amd.com
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ac635367e)
Cc: stable@vger.kernel.org
The current logic uses the flush sequence from the current address
space. This is harmless when deducing the flush requirements for the
current submit, as either the incoming address space is the same one
as the currently active one or we switch context, in which case the
flush is unconditional.
However, this sequence is also stored as the current flush sequence
of the GPU. If we switch context the stored flush sequence will no
longer belong to the currently active address space. This incoherency
can then cause missed flushes, resulting in translation errors.
Fixes: 27b67278e0 ("drm/etnaviv: rework MMU handling")
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Link: https://lore.kernel.org/r/20251021093723.3887980-1-l.stach@pengutronix.de
nouveau_sched_fini() uses a memory barrier before wait_event().
wait_event(), however, is a macro which expands to a loop which might
check the passed condition several times. The barrier would only take
effect for the first check.
Replace the barrier with a function which takes the spinlock.
Cc: stable@vger.kernel.org # v6.8+
Fixes: 5f03a507b2 ("drm/nouveau: implement 1:1 scheduler - entity relationship")
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251024161221.196155-2-phasta@kernel.org
