Each RAS block has different requirement for gpu reset in poison
consumption handling.
Add support for mmhub RAS poison consumption handling.
v2: remove the mmhub poison support for kfd int v10.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor update can be pre-empted by a request for setting target flip
submission.
This causes an issue where we're in the middle of the exit sequence
trying to log to DM, but the pre-emption starts another DMCUB
command submission that requires being out of idle.
The DC lock aqusition can fail, and depending on the DM/OS interface
it's possible that the function inserted into this thread must not fail.
This means that lock aqusition must be skipped and exit *must* occur.
[How]
Modify when we consider idle as active. Consider it exited only once
the exit has fully finished.
Consider it as entered prior to actual notification.
Since we're on the same core/thread the cached values are coherent
and we'll see that we still need to exit. Once the cursor update resumes
it'll continue doing the double exit but this won't cause a functional
issue, just a (potential) redundant operation.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Clear mpc_tree in init_pipes
- Program pixclk according to dcn revision
- Add stream clock source to DP DTO params
- Enabling urgent latency adjustment for DCN35
- To adjust dprefclk by down spread percentage
- Add debug option for idle reg checks
- Revert few patches which cause regression
- skip forcing odm in minimal transition
- Fix noise issue on HDMI AV mute
- Enable fast update for DCN314
- Enable 2to1 ODM policy for DCN35
- Fix DCN31 underflow problem
- Add the MALL size in the fallback function
- Modify coding style/errors and remove redundant codes
- Add missing registers and offset
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During init_pipes, otg master is not initialized. So mpc tree is
still configured even if mpc bottom is not active
[How]
For pipes that have tg enabled, check their mpc tree and clear
opp_list if mpc bottom is not active
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The problem is that when (for example) 4k pages are replaced
with a single 2M page we need to wait for change to be flushed
out by invalidating the TLB before the PT can be freed.
Solve this by moving the TLB flush into a DMA-fence object which
can be used to delay the freeing of the PT BOs until it is signaled.
V2: (Shashank)
- rebase
- set dma_fence_error only in case of error
- add tlb_flush fence only when PT/PD BO is locked (Felix)
- use vm->pasid when f is NULL (Mukul)
V4: - add a wait for (f->dependency) in tlb_fence_work (Christian)
- move the misplaced fence_create call to the end (Philip)
V5: - free the f->dependency properly
V6: (Shashank)
- light code movement, moved all the clean-up in previous patch
- introduce params.needs_flush and its usage in this patch
- rebase without TLB HW sequence patch
V7:
- Keep the vm->last_update_fence and tlb_cb code until
we can fix the HW sequencing (Christian)
- Move all the tlb_fence related code in a separate function so that
its easier to read and review
V9: Addressed review comments from Christian
- start PT update only when we have callback memory allocated
V10:
- handle device unlock in OOM case (Christian, Mukul)
- added Christian's R-B
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new types to distinguish between ACA error type and smu mca type.
e.g.:
the ACA_ERROR_TYPE_DEFERRED is not matched any smu mca valid bank
channel, so add new type 'aca_smu_type' to distinguish aca error type
and smu mca type.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx->plane_res.mpcc_inst is of a type that can only hold values
between 0 and 255, so it's always greater than or equal to 0.
Thus the condition 'pipe_ctx->plane_res.mpcc_inst >= 0' was always true
and has been removed.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1023 dcn35_calc_blocks_to_gate() warn: always true condition '(pipe_ctx->plane_res.mpcc_inst >= 0) => (0-255 >= 0)'
Fixes: 6f8b7565cc ("drm/amd/display: Add DCN35 HWSEQ")
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds descriptions for 'new_context', 'srf_updates', and
'surface_count', and removes the excess description for 'context'.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'new_context' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'srf_updates' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'surface_count' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Excess function parameter 'context' description in 'commit_minimal_transition_state_in_dc_update'
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c: In function ‘smu_v13_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:108:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
108 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~ ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:108:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30
108 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow occurs when running netflix in a 4k144 eDP + 4k60 setup.
Increasing DCFCLK or urgent latency watermark fixes the issue. Implementing
this workaround for now while we figure out why this is happenning in DCN.
[How]
Enable urgent latency adjustment and match the reference to existing ASIC
that also see increased latency at low FCLK.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add amdgpu ras event id support to better distinguish different
error information sources in dmesg logs.
the following log will be identify by event id:
{event_id} interrupt to inform RAS event
{event_id} ACA logs
{event_id} errors statistic since from current injection/error query
{event_id} errors statistic since from gpu load
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if reading pf2vf data failed 30 times continuously, it means something is
wrong. Need to trigger flr_work to recover the issue.
also use dev_err to print the error message to get which device has
issue and add warning message if waiting IDH_FLR_NOTIFICATION_CMPL
timeout.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In minial transitions state, ODM combine shouldn't be forced as it will
make transition non seamless. The force ODM debug option is to control
the end result not the intermediate transition. So we can temporarily
disable ODM forcing when committing minimal transition state.
[how]
Backup stream ODM forcing option and clear it in minimal transition
state. Once minimal transition state is released, we will restore the
original debug option back.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hostvm should be enabled/disabled accordding to the status of
riommu_active, but hostvm always be disabled on DCN31 which causes
underflow
[How]
Set correct hostvm flag on DCN31
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sherry Wang <Yao.Wang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DCN3_16_MIN_COMPBUF_SIZE_KB is defined in the dcn316_resource.c file.
This header fit better in the dcn31_fpu.h together with similar defines.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the following functionality:
- Check the queue preemption status on all XCDs in a partition
for GFX 9.4.3.
- Update the queue preemption debug message to print the queue
doorbell id for which preemption failed.
- Change the signature of check preemption failed function to
return a bool instead of uint32_t and pass the MQD manager
as an argument.
Suggested-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Report pcie link speed/width using metric table in case
of one vf & if pmfw support is available, else report directly from
registers in case of pf. Skip reporting it for other cases.
v2: Skip multi-vf check(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update PMFW interface headers for updated metrics table
with pcie link speed and pcie link width
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
If the driver has issues retrieving the MALL size for the specific
hardware, it might fail since the current value is set to zero. This
commit addresses this issue by adding a simple constant value to give
the drive a chance to start.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
