Johannes Berg says:
====================
Quite a number of fixes now:
- mac80211
- remove HT NSS validation to work with broken APs
(with a kunit fix now)
- remove 'static' that could cause races
- check station link lookup before further processing
- fix use-after-free due to delete in list iteration
- remove AP station on assoc failures to fix crashes
- ath12k
- fix OF node refcount imbalance
- fix queue flush ("REO update") in MLO
- fix RCU assert
- ath12k:
- fix Kconfig with POWER_SEQUENCING
- fix WMI buffer leaks on error conditions
- don't use uninitialized stack data when processing RSSI events
- fix logic for determining the peer ID in the RX path
- ath5k: fix a potential stack buffer overwrite
- rsi: fix thread lifetime race
- brcmfmac: fix potential UAF
- nl80211:
- stricter permissions/checks for PMK and netns
- fix netlink policy vs. code type confusion
- cw1200: revert a broken locking change
- various fixes to not trust values from firmware
* tag 'wireless-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (25 commits)
wifi: nl80211: re-check wiphy netns in nl80211_prepare_wdev_dump() continuation
wifi: nl80211: require CAP_NET_ADMIN over the target netns in SET_WIPHY_NETNS
wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage
wifi: mac80211: remove station if connection prep fails
wifi: mac80211: use safe list iteration in radar detect work
wifi: libertas: notify firmware load wait on disconnect
wifi: ath5k: do not access array OOB
wifi: ath12k: fix peer_id usage in normal RX path
wifi: ath12k: initialize RSSI dBm conversion event state
wifi: ath12k: fix leak in some ath12k_wmi_xxx() functions
wifi: cw1200: Revert "Fix locking in error paths"
wifi: mac80211: tests: mark HT check strict
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
wifi: mac80211: drop stray 'static' from fast-RX rx_result
wifi: mac80211: check ieee80211_rx_data_set_link return in pubsta MLO path
wifi: nl80211: require admin perm on SET_PMK / DEL_PMK
wifi: libertas: fix integer underflow in process_cmdrequest()
wifi: b43legacy: enforce bounds check on firmware key index in RX path
wifi: b43: enforce bounds check on firmware key index in b43_rx()
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
...
====================
Link: https://patch.msgid.link/20260506110325.219675-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NL80211_CMD_GET_SCAN is implemented as a multi-call dumpit. The first
invocation of nl80211_prepare_wdev_dump() validates the requested wdev
against the caller's netns via __cfg80211_wdev_from_attrs(). Subsequent
invocations look up the same wiphy by its global index and do not check
that the wiphy is still in the caller's netns.
Add the same filter to the continuation path. If the wiphy's netns no
longer matches the caller's, return -ENODEV and the netlink dump
machinery terminates the walk cleanly.
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506064854.2207105-3-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_CMD_SET_WIPHY_NETNS dispatches with GENL_UNS_ADMIN_PERM, which
verifies that the caller has CAP_NET_ADMIN for the source netns. It
doesn't verify that the caller has CAP_NET_ADMIN over the target netns
selected by NL80211_ATTR_NETNS_FD or NL80211_ATTR_PID.
This diverges from the convention enforced in
net/core/rtnetlink.c::rtnl_get_net_ns_capable():
/* For now, the caller is required to have CAP_NET_ADMIN in
* the user namespace owning the target net ns.
*/
if (!sk_ns_capable(sk, net->user_ns, CAP_NET_ADMIN))
return ERR_PTR(-EACCES);
A user with CAP_NET_ADMIN in their own user namespace can therefore
push a wiphy into an arbitrary netns (including init_net) over which
they have no privilege.
Mirror the rtnetlink convention by requiring CAP_NET_ADMIN in the
target netns before calling cfg80211_switch_netns().
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506064854.2207105-2-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If connection preparation fails for MLO connections, then the
interface is completely reset to non-MLD. In this case, we must
not keep the station since it's related to the link of the vif
being removed. Delete an existing station. Any "new_sta" is
already being removed, so that doesn't need changes.
This fixes a use-after-free/double-free in debugfs if that's
enabled, because a vif going from MLD (and to MLD, but that's
not relevant here) recreates its entire debugfs.
Cc: stable@vger.kernel.org
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260505151533.c4e52deb06ad.Iafe56cec7de8512626169496b134bce3a6c17010@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In copy mode TX, xsk_skb_destructor_set_addr() stores the 64-bit
descriptor address into skb_shinfo(skb)->destructor_arg (void *) via a
uintptr_t cast:
skb_shinfo(skb)->destructor_arg = (void *)((uintptr_t)addr | 0x1UL);
On 32-bit architectures uintptr_t is 32 bits, so the upper 32 bits of
the descriptor address are silently dropped. In XDP_ZEROCOPY unaligned
mode the chunk offset is encoded in bits 48-63 of the descriptor
address (XSK_UNALIGNED_BUF_OFFSET_SHIFT = 48), meaning the offset is
lost entirely. The completion queue then returns a truncated address to
userspace, making buffer recycling impossible.
Fix this by handling the 32-bit case directly in
xsk_skb_destructor_set_addr(): when !CONFIG_64BIT, allocate an
xsk_addrs struct (the same path already used for multi-descriptor
SKBs) to store the full u64 address. The existing tagged-pointer logic
in xsk_skb_destructor_is_addr() stays unchanged: slab pointers returned
from kmem_cache_zalloc() are always word-aligned and therefore have
bit 0 clear, which correctly identifies them as a struct pointer
rather than an inline tagged address on every architecture.
Factor the shared kmem_cache_zalloc + destructor_arg assignment into
__xsk_addrs_alloc() and add a wrapper xsk_addrs_alloc() that handles
the inline-to-list upgrade (is_addr check + get_addr + num_descs = 1).
The three former open-coded kmem_cache_zalloc call sites now reduce to
a single call each.
Propagate the -ENOMEM from xsk_skb_destructor_set_addr() through
xsk_skb_init_misc() so the caller can clean up the skb via kfree_skb()
before skb->destructor is installed.
The overhead is one extra kmem_cache_zalloc per first descriptor on
32-bit only; 64-bit builds are completely unchanged.
Closes: https://lore.kernel.org/all/20260419045824.D9E5EC2BCAF@smtp.kernel.org/
Fixes: 0ebc27a4c6 ("xsk: avoid data corruption on cq descriptor number")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-9-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When xsk_build_skb() / xsk_build_skb_zerocopy() sees the first
continuation descriptor, it promotes destructor_arg from an inlined
address to a freshly allocated xsk_addrs (num_descs = 1). The counter
is bumped to >= 2 only at the very end of a successful build (by calling
xsk_inc_num_desc()).
If the build fails in between (e.g. alloc_page() returns NULL with
-EAGAIN, or the MAX_SKB_FRAGS overflow hits), we jump to free_err, skip
calling xsk_inc_num_desc() to increment num_descs and leave the half-built
skb attached to xs->skb for the app to retry. The skb now has
1) destructor_arg = a real xsk_addrs pointer,
2) num_descs = 1
If the app never retries and just close()s the socket, xsk_release()
calls xsk_drop_skb() -> xsk_consume_skb(), which decides whether to
free xsk_addrs by testing num_descs > 1:
if (unlikely(num_descs > 1))
kmem_cache_free(xsk_tx_generic_cache, destructor_arg);
Because num_descs is exactly 1 the branch is skipped and the
xsk_addrs object is leaked to the xsk_tx_generic_cache slab.
Fix it by directly testing if destructor_arg is still addr. Or else it
is modified and used to store the newly allocated memory from
xsk_tx_generic_cache regardless of increment of num_desc, which we
need to handle.
Closes: https://lore.kernel.org/all/20260419045824.D9E5EC2BCAF@smtp.kernel.org/
Fixes: 0ebc27a4c6 ("xsk: avoid data corruption on cq descriptor number")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-8-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once xsk_skb_init_misc() has been called on an skb, its destructor is
set to xsk_destruct_skb(), which submits the descriptor address(es) to
the completion queue and advances the CQ producer. If such an skb is
subsequently freed via kfree_skb() along an error path - before the
skb has ever been handed to the driver - the destructor still runs and
submits a bogus, half-initialized address to the CQ.
Postpone the init phase when we believe the allocation of first frag is
successfully completed. Before this init, skb can be safely freed by
kfree_skb().
Closes: https://lore.kernel.org/all/20260419045822.843BFC2BCAF@smtp.kernel.org/
Fixes: c30d084960 ("xsk: avoid overwriting skb fields for multi-buffer traffic")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-6-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When xsk_build_skb() processes multi-buffer packets in copy mode, the
first descriptor stores data into the skb linear area without adding
any frags, so nr_frags stays at 0. The caller then sets xs->skb = skb
to accumulate subsequent descriptors.
If a continuation descriptor fails (e.g. alloc_page returns NULL with
-EAGAIN), we jump to free_err where the condition:
if (skb && !skb_shinfo(skb)->nr_frags)
kfree_skb(skb);
evaluates to true because nr_frags is still 0 (the first descriptor
used the linear area, not frags). This frees the skb while xs->skb
still points to it, creating a dangling pointer. On the next transmit
attempt or socket close, xs->skb is dereferenced, causing a
use-after-free or double-free.
Fix by using a !xs->skb check to handle first frag situation, ensuring
we only free skbs that were freshly allocated in this call
(xs->skb is NULL) and never free an in-progress multi-buffer skb that
the caller still references.
Closes: https://lore.kernel.org/all/20260415082654.21026-4-kerneljasonxing@gmail.com/
Fixes: 6b9c129c2f ("xsk: remove @first_frag from xsk_build_skb()")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-5-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a first descriptor (xs->skb == NULL) triggers -EOVERFLOW in
xsk_build_skb_zerocopy() (e.g., MAX_SKB_FRAGS exceeded), the
free_err -EOVERFLOW handler unconditionally dereferences xs->skb
via xsk_inc_num_desc(xs->skb) and xsk_drop_skb(xs->skb), causing
a NULL pointer dereference.
Fix this by guarding the existing xsk_inc_num_desc()/xsk_drop_skb()
calls with an xs->skb check (for the continuation case), and add
an else branch for the first-descriptor case that manually cancels
the one reserved CQ slot and increments invalid_descs by one to
account for the single invalid descriptor.
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-4-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix it by explicitly adding kfree_skb() before returning back to its
caller.
How to reproduce it in virtio_net:
1. the current skb is the first one (which means xs->skb is NULL) and
hit the limit MAX_SKB_FRAGS.
2. xsk_build_skb_zerocopy() returns -EOVERFLOW.
3. the caller xsk_build_skb() clears skb by using 'skb = NULL;'. This
is why bug can be triggered.
4. there is no chance to free this skb anymore.
Note that if in this case the xs->skb is not NULL, xsk_build_skb() will
call xsk_drop_skb(xs->skb) to do the right thing.
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_checksum_help() is a common helper that writes the folded
16-bit checksum back via skb->data + csum_start + csum_offset,
i.e. it relies on the skb's linear head and fails (with WARN_ONCE
and -EINVAL) when skb_headlen() is 0.
AF_XDP generic xmit takes two very different paths depending on the
netdev. Drivers that advertise IFF_TX_SKB_NO_LINEAR (e.g. virtio_net)
skip the "copy payload into a linear head" step on purpose as a
performance optimisation: xsk_build_skb_zerocopy() only attaches UMEM
pages as frags and never calls skb_put(), so skb_headlen() stays 0
for the whole skb. For these skbs there is simply no linear area for
skb_checksum_help() to write the csum into - the sw-csum fallback is
structurally inapplicable.
The patch tries to catch this and reject the combination with error at
setup time. Rejecting at bind() converts this silent per-packet failure
into a synchronous, actionable -EOPNOTSUPP at setup time. HW csum and
launch_time metadata on IFF_TX_SKB_NO_LINEAR drivers are unaffected
because they do not call skb_checksum_help().
Without the patch, every descriptor carrying 'XDP_TX_METADATA |
XDP_TXMD_FLAGS_CHECKSUM' produces:
1) a WARN_ONCE "offset (N) >= skb_headlen() (0)" from skb_checksum_help(),
2) sendmsg() returning -EINVAL without consuming the descriptor
(invalid_descs is not incremented),
3) a wedged TX ring: __xsk_generic_xmit() does not advance the
consumer on non-EOVERFLOW errors, so the next sendmsg() re-reads
the same descriptor and re-hits the same WARN until the socket
is closed.
Closes: https://lore.kernel.org/all/20260419045822.843BFC2BCAF@smtp.kernel.org/#t
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Fixes: 30c3055f9c ("xsk: wrap generic metadata handling onto separate function")
Link: https://patch.msgid.link/20260502200722.53960-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5: Fixes for Socket-Direct
This series fixes several race conditions and bugs in the mlx5
Socket-Direct (SD) single netdev flow.
Patch 1 serializes mlx5_sd_init()/mlx5_sd_cleanup() with
mlx5_devcom_comp_lock() and tracks the SD group state on the primary
device, preventing concurrent or duplicate bring-up/tear-down.
Patch 2 fixes the debugfs "multi-pf" directory being stored on the
calling device's sd struct instead of the primary's, which caused
memory leaks and recreation errors when cleanup ran from a different PF.
Patch 3 fixes a race where a secondary PF could access the primary's
auxiliary device after it had been unbound, by holding the primary's
device lock while operating on its auxiliary device.
Patch 4 fixes missing cleanup on ETH probe errors. The analogous gap on
the resume path requires introducing sd_suspend/resume APIs that only
destroy FW resources and is left for a follow-up series.
====================
Link: https://patch.msgid.link/20260504180206.268568-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When utilizing Socket-Direct single netdev functionality the driver
resolves the actual auxiliary device using mlx5_sd_get_adev(). However,
the current implementation returns the primary ETH auxiliary device
without holding the device lock, leading to a potential race condition
where the ETH device could be unbound or removed concurrently during
probe, suspend, resume, or remove operations.[1]
Fix this by introducing mlx5_sd_put_adev() and updating
mlx5_sd_get_adev() so that secondaries devices would get a ref and
acquire the device lock of the returned auxiliary device. After the lock
is acquired, a second devcom check is needed[2].
In addition, update The callers to pair the get operation with the new
put operation, ensuring the lock is held while the auxiliary device is
being operated on and released afterwards.
The "primary" designation is determined once in sd_register(). It's set
before devcom is marked ready, and it never changes after that.
In Addition, The primary path never locks a secondary: When the primary
device invoke mlx5_sd_get_adev(), it sees dev == primary and returns.
no additional lock is taken.
Therefore lock ordering is always: secondary_lock -> primary_lock. The
reverse never happens, so ABBA deadlock is impossible.
[1]
for example:
BUG: kernel NULL pointer dereference, address: 0000000000000370
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 4 UID: 0 PID: 3945 Comm: bash Not tainted 6.19.0-rc3+ #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_dcbnl_dscp_app+0x23/0x100 [mlx5_core]
Call Trace:
<TASK>
mlx5e_remove+0x82/0x12a [mlx5_core]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x140
device_del+0x159/0x3c0
? devl_param_driverinit_value_get+0x29/0x80
mlx5_rescan_drivers_locked+0x92/0x160 [mlx5_core]
mlx5_unregister_device+0x34/0x50 [mlx5_core]
mlx5_uninit_one+0x43/0xb0 [mlx5_core]
remove_one+0x4e/0xc0 [mlx5_core]
pci_device_remove+0x39/0xa0
device_release_driver_internal+0x194/0x1f0
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x55/0xe90
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
CPU0 (primary) CPU1 (secondary)
==========================================================================
mlx5e_remove() (device_lock held)
mlx5e_remove() (2nd device_lock held)
mlx5_sd_get_adev()
mlx5_devcom_comp_is_ready() => true
device_lock(primary)
mlx5_sd_get_adev() ==> ret adev
_mlx5e_remove()
mlx5_sd_cleanup()
// mlx5e_remove finished
// releasing device_lock
//need another check here...
mlx5_devcom_comp_is_ready() => false
Fixes: 381978d283 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When _mlx5e_probe() fails, the preceding successful mlx5_sd_init() is
not undone. Auxiliary bus probe failure skips binding, so mlx5e_remove()
is never called for that adev and the matching mlx5_sd_cleanup() never
runs - leaking the per-dev SD struct.
Call mlx5_sd_cleanup() on the probe error path to balance
mlx5_sd_init().
A similar gap exists on the resume path: mlx5_sd_init() and
mlx5_sd_cleanup() are currently bundled with both probe/remove and
suspend/resume, even though only the FW alias state actually needs to
follow the suspend/resume lifecycle - the sd struct allocation and
devcom membership are software state that should track the full bound
lifetime. As a result, a failed resume can leave a still-bound device
with sd == NULL, which mlx5_sd_get_adev() can't distinguish from a
non-SD device. Fixing this requires sd_suspend/resume APIs which will
only destroy FW resources and is left for a follow-up series.
Fixes: 381978d283 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_sd_init() creates the "multi-pf" debugfs directory under the
primary device debugfs root, but stored the dentry in the calling
device's sd struct. When sd_cleanup() run on a different PF,
this leads to using the wrong sd->dfs for removing entries, which
results in memory leak and an error in when re-creating the SD.[1]
Fix it by explicitly storing the debugfs dentry in the primary
device sd struct and use it for all per-group files.
[1]
debugfs: 'multi-pf' already exists in '0000:08:00.1'
Fixes: 4375130bf5 ("net/mlx5: SD, Add debugfs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_sd_init() / mlx5_sd_cleanup() may run from multiple PFs in the same
Socket-Direct group. This can cause the SD bring-up/tear-down sequence
to be executed more than once or interleaved across PFs.
Protect SD init/cleanup with mlx5_devcom_comp_lock() and track the SD
group state on the primary device. Skip init if the primary is already
UP, and skip cleanup unless the primary is UP.
The state check on cleanup is needed because sd_register() drops the
devcom comp lock between marking the comp ready and assigning
primary_dev on each peer. A concurrent cleanup that acquires the lock
in this window would observe devcom_is_ready==true while primary_dev
is still NULL (causing mlx5_sd_get_primary() to return NULL) or while
the FW alias setup performed by mlx5_sd_init()'s body has not yet run
(causing sd_cmd_unset_primary() to dereference a NULL tx_ft). Gate the
cleanup body on primary_sd->state == MLX5_SD_STATE_UP, which is set
only at the very end of mlx5_sd_init() under the same comp lock - so
observing UP guarantees primary_dev, secondaries[], tx_ft, and dfs are
all populated. Also bail explicitly if mlx5_sd_get_primary() returns
NULL, in case state is checked on a peer whose primary_dev hasn't been
assigned yet.
In addition, move mlx5_devcom_comp_set_ready(false) from sd_unregister()
into the cleanup's locked section, including the !primary and
state != UP early-exit paths, so the device cannot unregister and free
its struct mlx5_sd while devcom is still marked ready. A concurrent
init acquiring the devcom lock will now observe devcom is no longer
ready and bail out immediately.
Fixes: 381978d283 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink reload while PSP connections are active does:
mlx5_unload_one_devl_locked() -> mlx5_detach_device()
-> _mlx5e_suspend()
-> mlx5e_detach_netdev()
-> profile->cleanup_rx
-> profile->cleanup_tx
-> mlx5e_destroy_mdev_resources() -> mlx5_core_dealloc_pd() fails:
...
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:821:(pid 19722):
DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9),
syndrome (0xef0c8a), err(-22)
...
The reason for failure is the existence of TX keys, which are removed by
the PSP dev unregistration happening in:
profile->cleanup() -> mlx5e_psp_unregister() -> mlx5e_psp_cleanup()
-> psp_dev_unregister()
...but this isn't invoked in the devlink reload flow, only when changing
the NIC profile (e.g. when transitioning to switchdev mode) or on dev
teardown.
Move PSP device registration into mlx5e_nic_enable(), and unregistration
into the corresponding mlx5e_nic_disable(). These functions are called
during netdev attach/detach after RX & TX are set up.
This ensures that the keys will be gone by the time the PD is destroyed.
Fixes: 89ee2d92f6 ("net/mlx5e: Support PSP offload functionality")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, during PSP init, priv->psp is initialized to an incompletely
built psp struct. Additionally, on fs init failure priv->psp is reset to
NULL.
Change this so that only a fully initialized priv->psp is set, which
makes the code easier to reason about in failure scenarios.
Fixes: af2196f494 ("net/mlx5e: Implement PSP operations .assoc_add and .assoc_del")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->psp->psp is initialized with the PSP device as returned by
psp_dev_create(). This could also return an error, in which case a
future psp_dev_unregister() will result in unpleasantness.
Avoid that by using a local variable and only saving the PSP device when
registration succeeds.
In case psp_dev_create() fails, priv->psp and steering structs are left
in place, but they will be inert. The unchecked access of priv->psp in
mlx5e_psp_offload_handle_rx_skb() won't happen because without a PSP
device, there can be no SAs added and therefore no packets will be
successfully decrypted and be handed off to the SW handler.
Fixes: 89ee2d92f6 ("net/mlx5e: Support PSP offload functionality")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as
a loop bound over port_msg->data[] without checking that the message buffer
contains sufficient data. A modem sending port_count=65535 in a 12-byte
buffer triggers a slab-out-of-bounds read of up to 262140 bytes.
Add a sizeof(*port_msg) check before accessing the port message header
fields to guard against undersized messages.
Add a struct_size() check after extracting port_count and before the loop.
In t7xx_parse_host_rt_data(), guard the rt_feature header read with a
remaining-buffer check before accessing data_len, validate feat_data_len
against the actual remaining buffer to prevent OOB reads and signed
integer overflow on offset.
Pass msg_len from both call sites: skb->len at the DPMAIF path after
skb_pull(), and the validated feat_data_len at the handshake path.
Fixes: da45d2566a ("net: wwan: t7xx: Add control port")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Link: https://patch.msgid.link/20260501110713.145563-1-jhapavitra98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
IPVS fixes for net
The following batch contains IPVS fixes for net to address issues
from the latest net-next pull request.
Julian Anastasov made the following summary:
1-3) Fixes for the recently added resizable hash tables
4) dest from trash can be leaked if ip_vs_start_estimator() fails
5) fixed races and locking for the estimation kthreads
6) fix for wrong roundup_pow_of_two() usage in the resizable hash
tables
7-8) v2 of the changes from Waiman Long to properly guard against
the housekeeping_cpumask() updates:
https://lore.kernel.org/netfilter-devel/20260331165015.2777765-1-longman@redhat.com/
I added missing Fixes tag. The original description:
Since commit 041ee6f372 ("kthread: Rely on HK_TYPE_DOMAIN for preferred
affinity management"), the HK_TYPE_KTHREAD housekeeping cpumask may no
longer be correct in showing the actual CPU affinity of kthreads that
have no predefined CPU affinity. As the ipvs networking code is still
using HK_TYPE_KTHREAD, we need to make HK_TYPE_KTHREAD reflect the
reality.
This patch series makes HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
and uses RCU to protect access to the HK_TYPE_KTHREAD housekeeping
cpumask.
Julian plans to post a nf-next patch to limit the connections by using
"conn_max" sysctl. With Simon Horman, they agreed that this is an old
problem that we do not have a limit of connections and it is not a
stopper for this patchset.
* tag 'nf-26-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
sched/isolation: Make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
ipvs: Guard access of HK_TYPE_KTHREAD cpumask with RCU
ipvs: fix shift-out-of-bounds in ip_vs_rht_desired_size
ipvs: fix races around est_mutex and est_cpulist
ipvs: do not leak dest after get from dest trash
ipvs: fix the spin_lock usage for RT build
ipvs: fix races around the conn_lfactor and svc_lfactor sysctl vars
ipvs: fixes for the new ip_vs_status info
====================
Link: https://patch.msgid.link/20260505001648.360569-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi says:
====================
bnxt_en: Bug fixes
This patchset adds the following fixes for bnxt:
Patch #1 fixes DPC AER handling to make it more reliable
Patch #2 fixes incorrect capping bp->max_tpa based on what the FW
supports
Patch #3 fixes ignoring of VNIC configuration result when RDMA
driver is loading
Patch #4 fixes logic to make phase adjustment on the PPS OUT signal
====================
Link: https://patch.msgid.link/20260504083611.1383776-1-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the bnxt RDMA driver is loaded, it calls bnxt_register_dev().
As part of this, driver sends HWRM_VNIC_CFG firmware command
to configure the VNIC to operate in dual VNIC mode. Currently
the driver ignores the result of this firmware command. The RDMA
driver must know the result since it affects its functioning.
Check return value of call to bnxt_hwrm_vnic_cfg() in
bnxt_register_dev() and return failure on error.
Fixes: a588e4580a ("bnxt_en: Add interface to support RDMA driver.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-4-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This basically defaulted to m until recently, since IPV6 defaulted to
m. Since IPV6 was changed to a boolean with a default of y, IPV6_SIT
started defaulting to built-in as well. This results in a surprise
sit0 device by default for defconfig (and defconfig-derived config)
users at boot. For me, this broke an (admittedly non-robust) script.
Preserve the behaviour of most configs by avoiding building this
module, that's probably overall seldom used compared to IPv6 as a
whole, into the kernel.
Fixes: 309b905dee ("ipv6: convert CONFIG_IPV6 to built-in only and clean up Kconfigs")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260503192515.290900-2-hi@alyssa.is
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeff Johnson says:
==================
ath.git update for v7.1-rc3
Fix an ath5k potential stack buffer overwrite.
Fix several issues in ath12k:
- WMI buffer leaks on error conditions
- use of uninitialized stack data when processing RSSI events
- incorrect logic for determining the peer ID in the RX path
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A zerocopy send can fail after user pages have been pinned but before
the message is attached to the sending socket.
The purge path currently infers zerocopy state from rm->m_rs, so an
unqueued message can be cleaned up as if it owned normal payload pages.
However, zerocopy ownership is really determined by the presence of
op_mmp_znotifier, regardless of whether the message has reached the
socket queue.
Capture op_mmp_znotifier up front in rds_message_purge() and use it as
the cleanup discriminator. If the message is already associated with a
socket, keep the existing completion path. Otherwise, drop the pinned
page accounting directly and release the notifier before putting the
payload pages.
This keeps early send failure cleanup consistent with the zerocopy
lifetime rules without changing the normal queued completion path.
Fixes: 0cebaccef3 ("rds: zerocopy Tx support.")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Nan Li <tonanli66@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/d2ea98a6313d5467bac00f7c9fef8c7acddb9258.1777550074.git.tonanli66@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ilya Maximets says:
====================
openvswitch: fix self-deadlock on release of tunnel vports
Two patches - the fix for the actual bug and the selftest that reproduces it.
I missed the self-deadlock in the original patch that introduced the issue,
because testing required code modification in the ovs-vswitchd to force it to
use legacy tunnel ports. I thought I made the change correctly, but apparently
something went wrong and the tests were run with the standard LWT infra instead.
The selftest added in this patch set will at least prevent this kind of mistakes
in the future.
I mentioned, however, that these tunnel vports are legacy and not actually used
by ovs-vswitchd. RTM_NEWLINK + COLLECT_METADATA is used in conjunction with the
standard OVS_VPORT_TYPE_NETDEV instead since 2017. The code to use the legacy
tunnels still exists in ovs-vswitchd however, but only as a fallback for older
kernels and we're planning to remove it in the next release. I'll be sending an
RFC to remove support for these legacy tunnel types from the kernel, as they
serve no real purpose today and only increase the uAPI surface for CVEs, but
we need to fix the known bugs for stable versions.
v1: https://lore.kernel.org/netdev/20260429151756.4157670-1-i.maximets@ovn.org/
====================
Link: https://patch.msgid.link/20260430233848.440994-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There were a few issues found with the tunnel vport types around the
vport destruction code. Add some basic tests, so at least we know that
they can be properly added and removed without obvious issues.
The test creates OVS datapath, adds a non-LWT tunnel port, makes sure
they are created, and then removes the datapath and waits for all the
ports to be gone.
The dpctl script had a few bugs in the none-lwt tunnel creation code,
so fixing them as well to make the testing possible:
- The type of the --lwt option changed in order to properly disable it.
- Removed byte order conversion for the port numbers, as the value
supposed to be in the host order.
- Added missing 'gre' choice for the tunnel type.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260430233848.440994-3-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vports are used concurrently and protected by RCU, so netdev_put()
must happen after the RCU grace period. So, either in an RCU call or
after the synchronize_net(). The rtnl_delete_link() must happen under
RTNL and so can't be executed in RCU context. Calling synchronize_net()
while holding RTNL is not a good idea for performance and system
stability under load in general, so calling netdev_put() in RCU call
is the right solution here.
However,
when the device is deleted, rtnl_unlock() will call netdev_run_todo()
and block until all the references are gone. In the current code this
means that we never reach the call_rcu() and the vport is never freed
and the reference is never released, causing a self-deadlock on device
removal.
Fix that by moving the rcu_call() before the rtnl_unlock(), so the
scheduled RCU callback will be executed when synchronize_net() is
called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself
is already released.
Fixes: 6931d21f87 ("openvswitch: defer tunnel netdev_put to RCU release")
Cc: stable@vger.kernel.org
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260430233848.440994-2-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a tunnel vport is created it first creates the tunnel device, e.g.,
with geneve_dev_create_fb(), then it calls ovs_netdev_link() to take a
reference and link it to the device that represents openvswitch datapath.
The creation of the device is happening under RTNL, but then RTNL is
released and re-acquired to find the device by name. It is technically
possible for the tunnel device to be re-named or deleted within that
window while RTNL is not held, and some other device created in its
place. This will cause a non-tunnel device to be referenced in the
vport and tunnel-specific functions used on it, e.g. vxlan_get_options()
that directly casts the private netdev data into a struct vxlan_dev
causing an invalid memory access:
BUG: KASAN: slab-use-after-free in vxlan_get_options+0x323/0x3a0
vxlan_get_options+0x323/0x3a0
ovs_vport_cmd_new+0x6e3/0xd30
Fix that by taking a reference to the just created device before
releasing RTNL. This ensures that the device in the vport is always
the one that was just created. The search by name is only needed
for a standard vport-netdev that links pre-existing devices, so that
functionality and device type checks are moved to netdev_create().
It is also awkward that ovs_netdev_link() takes ownership of the vport
and destroys it on failure. It doesn't know the type of the port it is
dealing with, so we need to pass down the indicator that it's a tunnel,
so the link can be properly deleted on failure.
It's possible to refactor the logic to make the ovs_netdev_link() do
only the linking part and let the callers perform a proper destruction,
but it will be much more code for each legacy tunnel port type, so it
is not worth it for the bug fix.
Fixes: 614732eaa1 ("openvswitch: Use regular VXLAN net_device device")
Reported-by: Yuan Tan <tanyuan98@outlook.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Yang Yang <n05ec@lzu.edu.cn>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260430213349.407991-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dipayaan Roy says:
====================
net: mana: Fix mana_destroy_rxq() cleanup for partial RXQ init
When mana_create_rxq() fails partway through initialization (e.g. the
hardware rejects the WQ object creation), the error path calls
mana_destroy_rxq() to tear down a partially-initialized RXQ.
This exposed multiple issues in mana_destroy_rxq() path, as it assumed
the RXQ was always fully initialized, leading to multiple issues:
1. xdp_rxq_info_unreg() was called on an unregistered xdp_rxq,
triggering a WARN_ON ("Driver BUG") in net/core/xdp.c.
2. mana_destroy_wq_obj() was called with INVALID_MANA_HANDLE,
sending a bogus destroy command to the hardware.
3. mana_deinit_cq() was called twice — once inside mana_destroy_rxq()
and again in mana_create_rxq()'s error path — causing a
use-after-free since mana_destroy_rxq() frees the rxq first.
This was observed during ethtool ring parameter changes when the
hardware returned an error creating the RXQ. This series makes
mana_destroy_rxq() safe to call at any stage of RXQ initialization
by guarding each teardown step, and removes the redundant cleanup
in mana_create_rxq().
====================
Link: https://patch.msgid.link/20260430035935.1859220-1-dipayanroy@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In mana_create_rxq(), the error cleanup path calls mana_destroy_rxq()
followed by mana_deinit_cq(). This is incorrect for two reasons:
1. mana_destroy_rxq() already calls mana_deinit_cq() internally,
so the CQ's GDMA queue is destroyed twice.
2. mana_destroy_rxq() frees the rxq via kfree(rxq) before returning.
The subsequent mana_deinit_cq(apc, cq) then operates on freed memory
since cq points to &rxq->rx_cq, which is embedded in the
already-freed rxq structure — a use-after-free.
Remove the redundant mana_deinit_cq() call from the error path since
mana_destroy_rxq() already handles CQ cleanup. mana_deinit_cq() is
itself safe for an uninitialized CQ as it checks for a NULL gdma_cq
before proceeding.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Aditya Garg <gargaditya@linux.microsoft.com>
Link: https://patch.msgid.link/20260430035935.1859220-4-dipayanroy@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In mana_destroy_rxq(), mana_destroy_wq_obj() is called unconditionally
even when the WQ object was never created (rxobj is still
INVALID_MANA_HANDLE). When mana_create_rxq() fails before
mana_create_wq_obj() succeeds, the error path calls mana_destroy_rxq()
which sends a bogus destroy command to the hardware:
mana 7870:00:00.0: HWC: Failed hw_channel req: 0x1d
mana 7870:00:00.0: Failed to send mana message: -71, 0x1d
mana 7870:00:00.0 eth7: Failed to destroy WQ object: -71
Guard mana_destroy_wq_obj() with an INVALID_MANA_HANDLE check so that
mana_destroy_rxq() is safe to call at any stage of RXQ initialization.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20260430035935.1859220-3-dipayanroy@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
psp_dev_rcv() unconditionally removes a fixed PSP_ENCAP_HLEN, even
when psph->hdrlen indicates that the PSP header carries optional
fields. A frame whose PSP header advertises a non-zero VC or any
extension would therefore be silently mis-decapsulated: option bytes
would spill into the inner packet head and downstream parsing would
fail on a corrupted skb.
Compute the full PSP header length from psph->hdrlen, pull the
optional bytes into the linear region, and strip the whole header
when decapsulating. Optional fields (VC, ...) are still ignored,
just discarded with the rest of the header instead of leaking.
crypt_offset and the VIRT flag are intentionally not validated here
- callers know their device's PSP implementation and can decide.
Both in-tree callers gate on hardware-validated PSP, so this is a
correctness fix rather than a reachable corruption path under
current configurations.
Fixes: 0eddb8023c ("psp: provide decapsulation and receive helper for drivers")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260502141945.14484-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I was mistaken by synchronize_rcu() [1] call in netdev_name_node_alt_destroy(),
giving a false sense of RCU safety at delete times.
We have to use list_del_rcu() to not confuse potential readers
in rtnl_prop_list_size().
[1] This synchronize_rcu() call was later removed in commit 723de3ebef
("net: free altname using an RCU callback").
Fixes: 9f30831390 ("net: add rcu safety to rtnl_prop_list_size()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260502124102.499204-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
